0CO_PC_01 Data Source Enhancement
Dear Gurus,
I would like to enhance the 0CO_PC_01 data source with Date field. I could not see the table involved in this data source? could any one help how to indentify the tables involved in this DS and also please let me know to enhance this DS step -by-step process.
With Regards,
Balachander.S
Hello,
Tables:
COSS, COSP, COSL, AUFK
Check here:
http://help.sap.com/saphelp_nw70/helpdata/en/4f/5f61006c2b7048aaba0581e417f70c/content.htm
Regards,
Jorge Diogo
Similar Messages
-
Master Data Source Enhancement
Hi Gurus
I have a table in SAP which has customer, Sales Organization, Distribution Channel, Language (which is in EN always) and Customer Sales Text...
The Customer Sales Text is maintained at Sales Organization and Distribution Channel level..below is the example of one record...
Customer Sales Org. Distr. Channel Lang. Customer Sales Text
123 01 01 EN Blank (No text here)
123 01 02 EN Blank (No text here)
123 01 03 EN Blank (No text here)
123 01 04 EN Blank (No text here)
123 01 05 EN John Mathwes (Text appears here)
123 01 06 EN Blank (No text here)
so when i pull the data to BI i need to see only one record with Customer and text only (no Sales org and distr. Channel necessary) which has the Customer text value (5th record in above example)..
I created Data source in SAP and pulling the data to BI in DSO with customer and customer text....it's sorting and getting the latest distribution channel record (6th record in above example0
Can yo uplease tell me is there any way that i can get the record which has customer text in it..(any possibilities of writing abap routine in info package) or any data source enhancement with abap code...
can you pelase tell me the abap code that needs to be performed to solve the issue...
Thanks in advance
sailendraSort the RESULT_PACKAGE by customer and customer text in the endroutine of your transformation.
After the sort, the record with text for customer will be the last record and it will overwrite the other records in the DSO which has blank values.
Just add the below sort statement in your end routine.
SORT RESULT_PACKAGE[] BY CUSTOMER CUSTOMER_TEXT.
As per the sample records mentioned in your post, after the sort, 5th record will become the last record and this will overwrite the other records which has blank value in the DSO.
--- Thanks... -
Data source Enhancement for Sales Item
Dear SDN Mates,
We are enhancing the data source 2LIS_11_VAITM, when i try to enchance extraction structure it is not allowing to enhance. Showing a message :"2LIS_11_VAITM does not allow enhancing or append structure"
Mates if you came across these difficulties please let me know and suggest any ideas.
Thanks and Regards
Arun SHi,
Have a look at these links:
[SAP BW Data Source Enhancement|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/302d4b15-5847-2a10-93bb-9c45d9f06b16]
[Data Source Enhancement|Data source Enhancement Code Samples;
Hope it helps...
Regards,
Ashish
Edited by: Ashish Tewari on May 11, 2009 12:16 PM -
Data Source Enhancement for 2LIS_06_INV
Hi BW Experts,
We got a requirement. We have to work on Data Source Enhancement.
2LIS_06_INV is a LO Data Source. 3 extra fields required in existing Data Source.
That 3 Fields are available in single Table only.
I never worked on Data Source Enhancement.
Please can anyone tell me the steps.
I have read the forums but i did not understand it.
Thanks in advance
Regards,
Anjalihi anjali,
Every organisation has different structures so, the standard structure dosnt fit for all, in this situation u need to go for enhancement. based on your need u have add some field to std structure.
Check out this link...this z the best pdf for enhancing data source....
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0af763b-066e-2910-a784-dc6731660f46
pdf 'enhancements in sap bw' with steps
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/59069d90-0201-0010-fd81-d5e11994d8b5
Enhancement
User exit
hope it helps... -
Text not visible for the new fields created for Data Source Enhancement
Hi .... I am working on Data Source Enhancements. I created few fields and append then to the Data SourceStructure . I also have populated the fields with data. The problem with a field is that I am not getting the text displayed in RSA3 ..Instead I am getting the field name itself.
Example:
FieldName DataElement Datatype length dec Text
ZZDOCTY AUART CHAR 4 0 Sales Document Type
ZZNOODL ZD_NODL NUMC 1 0 Number of Deliveries
In the above example the field ZZDOCTY is showing me the description in RSA3 i.e. Sales Document Type whereas the field ZZNOODL is not showing the text. Instead it is directly giving the fieldname ZZNOODL. Is it because of the fact that I created a Data Element for that field ??? and as I did not use the predefined data element as I did for ZZDOCTY???? Please reply me soon.....I need to display the text as "Number of Deliveries" instead of ZZNOODL........I am working on 7.0.....May be the fields are hidden.
Go to RSA6 select your data source and on the tool bar there will be a pencil butonto change. Click that and at the bottom, you will lots of check boxes.
You go the field that you have enhanced and see whether the HIDE boxes are checked. If so, uncheck them, save and execute RSA3.
Ravi Thothadri -
HI SDNers,
I have done data source enhancement with 6 key fig and added those key fig to DSO in DEV and I need to move it to QA. Do I need to delete the data of DSO in QA before move. Do I get any issue with transportation? Actually this is most sencitive data for my client is it possible without deleting data?
Thanks,
SwathiHi Swathi,
You need not delete data from the ODS if you have only added fields to this object. If the no of records in the ODS are more the import of the changes will take a little longer. There should not be any problem.
Best Regards,
Murali. -
Data source enhancement thru function module
Folks,
I am trying to figure relation between data source enhancement, package, function module etc?
I see a function module where enhancement is done. when I go and try to see master data exit EXIT_SAPLRSAP_0002 ... I see include but I do not see reference of function module in this include?
All these codes are so simple... but I am struggling to figure out all these relation RSAP0001, exit_saplrsap* - include inside and function module attached?
Can somebody give very simple connection for all these components?
Thanks,
-SMHi,
All these codes are so simple... but I am struggling to figure out all these relation RSAP0001, exit_saplrsap - include inside and* function module attached?
Please note that for enhancing certain standard objects for meet customer needs, SAP provides different customer exits where we can code as per our requirements.
These customer exits starting with EXIT********* will be grouped by Enhancements e.g. RSAP0001
Thanks for your response. In RS02 it is clear that we can mention function module name for data source - that is good for generic extraction. But what do we do when we are enhancing SAP extractor?
When you want to enhance SAP extractors, you go for customer exits.
EXIT_SAPLRSAP_001 for Transactional datasources
EXIT_SAPLRSAP_002 for Master datasources
EXIT_SAPLRSAP_003 for Text datasources
EXIT_SAPLRSAP_004 for Hierarchy datasources
in se37 screen in table tab - sometime we see extract structure - that will establish which functional being called for which data source, but in my case - I do not see anything in table tab?
If your datasource is function module based, then the function module which is mentioned in RSO2 for your datasource would surely have e_t_data in tables tab with its associated type.
Only if the datasource is standard one and is processed by function module e.g. 2lis_18_i0notif which is processed by MCEX_BW_LO_API function module, these would not have associated type mentioned for them. To get their structure, you can go to RSA5/ RSA6 -
Data source Enhancement with Function Module
Hi all!
I have a requirement like I have to enhance my Generic Data source.
Let me make it clear!
I have 10 field in R/3 which I am able to get into extract structure using Generic Data Source on the corresponding Table.
I have another field on my extract structure, say ZEXMFLD1 which is updated by a function module ZZ_FUNC_MODULE_SAMPLE.
I came to know that Data source Enhancement can be done, but don't know how.
Request your guidance in this. Can u please let me know how I can achieve this?
Thanks,
SriHi Sri,
You can enhance generic datasources also.
For that you have to use below function modules based on your datasource type.
EXIT_SAPLRSAP_001 - Transactiona data
EXIT_SAPLRSAP_002 - Master
EXIT_SAPLRSAP_003 - text
EXIT_SAPLRSAP_004 - Hier
First check in CMOD(TCODE) whether component RSAP0001 is assigned to any project. If it is not assigned to any project(fresh system), assign it to a project by creating it.
Ex. ZBW. If it is already assigned, go SE37.
For transaction data go to function module EXIT_SAPLRSAP_001(Trans data) and start your logic.
CASE i_datasource.
WHEN 'your data source name'.
call you Function module - CALL 'ZZ_FUNC_MODULE_SAMPLE'.
pass the imported value from above FM to c_t_data.
close case with ENDCASE.
Let me know if you need more info.
- Kalyan. -
Data source enhancement using BADI
Hi,
We had a 2LIS_* extractor which is enhanced with ZZ fields.
I look for the sode in CMOD which i couldn't able to find any
My assumption is the data source is enhanced using BADI.....As i am not familiar with BADI's how can i create for my data source enhancement code in BADI
ThanksHi ,
Not sure on your question.
Is the Enhancement already done and you want to check whether it is done in BADI/CMOD.
Or
You want to populate the Data using BADI/CMOD.
In any case you can use CMOD or BADI to populate the data ,the recomendded is BADI which can be created in SE24..you can google for some Docs on its creation and steps to be followed.
And if tis CMOD you have to create a project and then write the code and for that also there are DOcs avaliable.
Rgds
SVU -
Data source enhancement while loading deltas
Hi Experts,
I've a scenario that while loading deltas do we perform data source enhancement if we can how do we do that.
This is i got a requirement, to enhance 2LIS_11_VAITM, while loading deltas. Now how do I go about this what are the exact steps that i follow to enhance.
Could s'one help in this regard because i'm new to the ABAP.
Thanks & Regards,
Amarhi,
Go to the extract structure of this datasource and display the extract structure of the datasource in SE11 and click on APPEND STRUCTURE and click on the tick mark and try to add the fields required into the lines. You need to populate the data on to these new enhanced fields in the user-exit. But when you move these transports to production environment, you have to stop deltas and re-initialize the datasource....
Hope it helps... -
Data source Enhancements Using Badis
HI gurus,
Can you please let me know the process in detail to implement the data source enhancements using badi's.
Please provide me the step by step proceedure.
Appropriate answer will be highly rewarded.
Thanks,
Shashikanth.http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
I have a few links for u! Just download the documents and have a reading. You will get an idea:
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4493c4a6-0301-0010-62a2-efd6ded61e04
Reward points if helpful
Regards
Edited by: Aadil on Jan 23, 2008 8:42 AM -
PLUG-INs & Data source Enhancements
Hi All BW Gurus,
I have been asked in a recent interview,
1."What is the PLUG-IN for LO'S Extraction?" and some PLUG-IN related questions.
2. "How do you enhance Data Sources in BW?".
Can you please make clear these two topics? Can you please try to send related documents to my mail-id [email protected],
Thank you very much,
with good wishes,
damoder prasadHi Damoder,
The SAP enhancement concept allows you to make enhancements to the standard in the BW system. Within the SAP BW system, function exits and BAdIs enable these enhancements to be made.
Have a Look:
1. Enhancements to the SAP Business Information Warehouse
http://help.sap.com/saphelp_nw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
2.Customer Exits
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/frameset.htm
Hope it Helps
Srini -
Data source enhancement for text
Hi,
I have a datasource 0customer_attr and it has also zfield .now requirement is to load the text of that zfield also in BW. I have a doubt about that whether I have to enhance ocustmer_attr ie add new field into it or I have to create a generic data source for it.
Thanks,
SaurabhHi,
customer_attr is fetching data from extract structure and this is based on kna1 table and kna1 table has some z fields . for those zfields we have custom table and in custom table(ztable ) we get the data from there respective r table . ie we have acq code in custom table(and in also data source and extract structure and kna1 table) and we require acq description also in BW. and acq code & desc is maintain in its respective table(its a z table ).
i also see the enhance abap code which is fetching data for acq code .
i have a doubt whether i add one more field to 0cust_attr or create generic data souce as it is Zfield.
Thanks,
Saurabh -
If we add a field in Transactional Data source what kind of syntex's for codeing reqd. in CMOD under EXIT_SAPLR..001 etc....
Hi
Please check the below links for overview of DS enhancement :
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0eade6c-692a-2c10-ac86-80f6b2157791?
http://wiki.sdn.sap.com/wiki/display/BI/BestPracticeforDataSource+Enhancement
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/302d4b15-5847-2a10-93bb-9c45d9f06b16
Regards,
Aparna -
Sap pm data source enhancement
HI all,
i need to enhance pm header and operations data sources with field " user status".
MY user want to see report like user status field with both numbered nd un numbered.
so i need user status field technicl name in bw. And u suggetions to do this.
thanks in advnce.
raviHi,
first from your user requirement find the source table for status. once you got the table name then you can enhance your data source and maintain the logic at CMOD to fill data to enhanced field(status).
You can add status field to your data source by appending to extract structure at SE11 or RSA6.
Unhide it at RAS6 Once you add field to data source.
1. Replicate data source,
2. Add related info object to your upward data from this data source.
3. creating mappings at transformations save and activate all changes.
Thanks
Maybe you are looking for
-
I purchased a MacBook Pro 17" a couple of weeks ago now and noticed that when the MacBook is at a 90 degree angle the lid closes. For example when I'm using my MacBook on my lap and have knees up the screen closes. It seems to be the hinges are loose
-
What about olap using java tech?
i'm now producing a project writting in java whose db server is microsoft sqlserver 7. one of the requirements is to query data from within the multidimentional data store(data warehouse or something). the help microsoft offers mentions how to connec
-
Which is better? iPad Smart Cover. Polyurethane or Leather?
Same
-
My daughter and granddaughter have the same model iPhone. I can go messages and text my granddaughters phone from my ipad2, but when I try to text my daughter I get the message that she is not registered with I message, but she is registered and get
-
We are experiencing Adobe files losing their .pdf suffix when being sent through e-mail. The problem seems to be connected to Exchange server, Office 2003/2007 or firewall/virus check. Anyone got a clue on how to avoid this?