0CSM_USER_TEXT taking much time to load

Its related to 0CSM_USER_TEXT which isn’t a Retail Datasource/Object so I’m to assume it’s a FI&Gen Job. The job currently produces 200,000 records over an 8 hour period. Firstly it used to finish in 8 sec for some number of records those were Not more than 10,000.
Please tell me solution why the loading is taking so much of time. Because of this whole Process Chain is taking time to load.

Hi,
Assuming as its taking more time while loading to psa.
if yes then please check your job log at source side.
Go to your info pack monitor--> menu environment--> job overview--> job in the source system--> it will prompts for source user id and password. enter them and you will egt your job.select job and lick on log details icon from tool bar. there you can see your job in detailed steps.
Thanks

Similar Messages

Taking much time for loading data

Dear All
While loading data in PRD system (for master data and transaction data), it's taking much time. For ex., 2LIS_05_QOITM, I am loading delta data only in PSA from R/3. Some times (yesterday) it's taking 2 mins and some times (today) it's taking 5 hrs not yet completed (it's yellow). Actually yesterday, we went to SM58 in R/3 side and executed that LUW for some other data sources. Now also we can do but we don't want to like that. Because we are expecting permanent soulution. Could u please advice me. I am getting below message in status tab
Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source system.
I am loading data through Process chain and user is BWREMOTE (authorized user).
Please help me.
Thanks a lot in advance
Raja

Dear Karthik
No I couldn't resolve till now
But Everything is fine.
Now status is yellow only (209 from 209). Now what i want to do.
Im getting below message in status tab
Missing data packages for PSA Table
Diagnosis
Data packets are missing from PSA Table . BI processing does not return any errors. The data transport from the source system to BI was probably incorrect.
Procedure
Check the tRFC overview in the source system.
You access this log using the wizard or following the menu path "Environment -> Transact. RFC -> Source System".
Error handling:
If the tRFC is incorrect, resolve the errors listed there.
Check that the source system is connected properly to BI. In particular, check the remote user authorizations in BI.
In detail tab, I am getting below message
Info IDoc 2 : sent, not arrived ; IDoc ready for dispatch (ALE service)
Thanks in advance
Raja

Taking too much time to load application

Hi,
I have deployed a j2ee application on oracle 10g version 10.1.2.0.2. But the application is taking too much time to load. After loading ,everything works fast.
I have another 10g server (same version) in which the same application is loading very fast.
When I checked the apache error logs found this :-
[Thu Apr 26 09:17:31 2007] [warn] [client 10.1.20.9] oc4j_socket_recvfull timed out
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] (4)Interrupted system call: MOD_OC4J_0038: Receiving data from oc4j exceeded the configured "Timeout" value and the error code is 4.
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0054: Failed to call network routine to receive an ajp13 message from oc4j.
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0033: Failed to receive an ajp13 message from oc4j.
[Thu Apr 26 09:17:31 2007] [warn] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0078: Network connection errors happened to host: lawdb.keralalawsect.org and port: 12501 while receiving the first response from oc4j. This request is recoverable.
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0121: Failed to service request with network worker: home_15 and it is not recoverable.
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0013: Failed to call destination: home's service() to service the request.
[Thu Apr 26 11:36:36 2007] [notice] FastCGI: process manager initialized (pid 21177)
[Thu Apr 26 11:36:37 2007] [notice] Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server configured -- resuming normal operations
[Thu Apr 26 11:36:37 2007] [notice] Accept mutex: fcntl (Default: sysvsem)
[Thu Apr 26 11:36:37 2007] [warn] long lost child came home! (pid 9124)
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0015: recv() returns 0. There has no message available to be received and oc4j has gracefully (orderly) closed the connection.
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0054: Failed to call network routine to receive an ajp13 message from oc4j.
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0033: Failed to receive an ajp13 message from oc4j.
[Thu Apr 26 11:39:51 2007] [warn] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0078: Network connection errors happened to host: lawdb.keralalawsect.org and port: 12501 while receiving the first response from oc4j. This request is recoverable.
[Thu Apr 26 11:39:51 2007] [warn] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0184: Failed to find an oc4j process for destination: home
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0145: There is no oc4j process (for destination: home) available to service request.
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0119: Failed to get an oc4j process for destination: home
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0013: Failed to call destination: home's service() to service the request.
[Thu Apr 26 11:46:33 2007] [notice] FastCGI: process manager initialized (pid 21726)
[Thu Apr 26 11:46:34 2007] [notice] Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server configured -- resuming normal operations
[Thu Apr 26 11:46:34 2007] [notice] Accept mutex: fcntl (Default: sysvsem)
[Thu Apr 26 11:46:34 2007] [warn] long lost child came home! (pid 21182)
[Thu Apr 26 11:53:32 2007] [warn] [client 10.1.20.9] oc4j_socket_recvfull timed out
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] (4)Interrupted system call: MOD_OC4J_0038: Receiving data from oc4j exceeded the configured "Timeout" value and the error code is 4.
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0054: Failed to call network routine to receive an ajp13 message from oc4j.
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0033: Failed to receive an ajp13 message from oc4j.
[Thu Apr 26 11:53:32 2007] [warn] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0078: Network connection errors happened to host: lawdb.keralalawsect.org and port: 12501 while receiving the first response from oc4j. This request is recoverable.
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0121: Failed to service request with network worker: home_15 and it is not recoverable.
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0013: Failed to call destination: home's service() to service the request.
Please HELP ME...

Hi this is what the solution given by your link
A.1.6 Connection Timeouts Through a Stateful Firewall Affect System Performance
Problem
To improve performance the mod_oc4j component in each Oracle HTTP Server process maintains open TCP connections to the AJP port within each OC4J instance it sends requests to.
In situations where a firewall exists between OHS and OC4J, packages sent via AJP are rejected if the connections can be idle for periods in excess of the inactivity timeout of stateful firewalls.
However, the AJP socket is not closed; as long as the socket remains open, the worker thread is tied to it and is never returned to the thread pool. OC4J will continue to create more threads, and will eventually exhaust system resources.
Solution
The OHS TCP connection must be kept "alive" to avoid firewall timeout issues. This can be accomplished using a combination of OC4J configuration parameters and Apache runtime properties.
Set the following parameters in the httpd.conf or mod_oc4j.conf configuration files. Note that the value of Oc4jConnTimeout sets the length of inactivity, in seconds, before the session is considered inactive.
Oc4jUserKeepalive on
Oc4jConnTimeout 12000 (or a similar value)
Also set the following AJP property at OC4J startup to enable OC4J to close AJP sockets in the event that a connection between OHS and OC4J is dropped due to a firewall timeout:
ajp.keepalive=true
For example:
java -Dajp.keepalive=true -jar oc4j.jar
Please tell me where or which file i should put the option
java -Dajp.keepalive=true -jar oc4j.jar ??????/

Creative Cloud is taking too much time to load and is not downloading the one month trial for Photoshop I just paid money for.

Creative Cloud is taking too much time to load and is not downloading the one month trial for Photoshop I just paid money for.

stop the download if it's stalled, and restart your download.

Full DTP taking too much time to load

Hi All ,
I am facing an issue where a DTP is taking too much time to load data from DSO to Cube via PC and also while manually running it.
There are 6 such similar DTP's which load data for different countries(different DSO's and Cubes as source and target respectively) for last 7 days based on GI Date. All the DTP's are pulling almost same no. of records and finish within 25-30 min. But only one DTP takes around 3 hours. The problem started couple of days back.
I have change the Parallel processes from 3->4->5 and packet size from 50,000->10,000->1.00.000 but no improvement. Also want to mention that all the source DSO's and target Cubes have the same structure. All the transformations have Field Routines and End Routines.
Can you all please share some pointers which can help.
Thanks
Prateek

HI Raman ,
This is what I get when I check the report. Can this be causing issues as 2 rows have % >= 100
ETVC0006           /BIC/DETVC00069     rows:      1.484    ratio:          0 %
ETVC0006           /BIC/DETVC0006C     rows: 15.059.600    ratio:        103 %
ETVC0006           /BIC/DETVC0006D     rows:        242    ratio:          0 %
ETVC0006           /BIC/DETVC0006P     rows:         66    ratio:          0 %
ETVC0006           /BIC/DETVC0006T     rows:        156    ratio:          0 %
ETVC0006           /BIC/DETVC0006U     rows:          2    ratio:          0 %
ETVC0006           /BIC/EETVC0006      rows: 14.680.700    ratio:        100 %
ETVC0006           /BIC/FETVC0006      rows:          0    ratio:          0 %
ETVC0007           rows: 13.939.200    density:              0,0 %

Ssrs Report taking to much time to load

Hello all,
I have a matrix report which was running nice before some days, but now taking too much time to load
i tested store procedure but it is ok to return same data in 5 seconds
and when i tested in ssrs BIDS side i set 60 sec for dataset timeout option, and it gets timeout
after i set 1000 seconds timeout but it is just rolling and rolling loading
when i check in executionlog of reportserver i found something like ..
TimeDataRetrieval TimeProcessing TimeRendering Status
RowCount
131951 323
95 rsHttpRuntimeClientDisconnectionError 1784
Reply me fast please, Help must appreciated ..
Thanks ..
Dilip Patil..

Hi Dilip,
According to your description, your report keeps loading symbol when rendering. Right?
In this scenario, as you can see in the Excecution Log, it spends a lot of time on data retrieval. Based on the status information, it's the issue on the conncetion. Since you have tested the stored procedure, and it works properly. Please check if the credentials
for data source has permisson to connect the database. You can also Test Connection when creating data source. As you mentioned, it uses Raido Frequency to connection. There might be large network traffic on transfering data.
Reference:
Troubleshooting Reports: Report Performance
Best Regards,
Simon Hou

PRS600 ereader taking too much time to load all the books

Whenever I open My PRS600 from complete shutdown it takes too much time to load all the files which are present in Memory card. Is anyone else facing same issue?

Hello,
Recently, I have been having some serious issues when it comes to my Sony PRS-600. I am running on a Windows 7 64-bit, and an updated Reader Library 3.3
The issue comes when transferring books to the e-reader from the library, and from the e-reader to a collection. The problem is that the software becomes intolerably slow while it's processing the command. The Reader Library software window grays out, displays (Not Working) and if clicked on it, shades to a white color and displays either "cancel operation" or "wait until program responds". If I do close the operation, it appears as if the e-reader doesn't follow the operation and still displays "Do not disconnect". Since I do not see any other way to disconnect (other than the eject option), I remove the USB plug which causes a bit more issues with the reader (such as removing all of my collections, for example!).
But anyway, that's not the main issue here. The main issue is that the book transferring is really slow. I need to wait a couple of minutes (or even more) just for the software to process. Moving just 1 MB of data requires so much time as if it's 1 GB. Sometimes it's random and does it fast, and sometimes the application is better not to be dealt with at all while it's processing the command. If I would inspect My Computer, the simple loading of the e-reader storage icons and information would make the Windows Explorer to "crash" (e.g, close all windows and then reopen them). It just happens that in all randomness even the creation of a collection makes the software slow.
So to recap: the reader software is slow when adding and moving books.
I hope someone will help me resolve this annoyance.
Thank you,
KQ

Page leads to proxy error sometimes or taking too much time to load

Hi All,
APEX4.0
Web server: Apache 1.3.9 (Oracle 9iAS 10.0.1.2.2)
I am getting the below error at first time when I try to open a page or the page takes 3 to 5 mins to load. From second time on wards, It takes 5 to 8 sec to open as normal. I debugged the page and checked the log. Logs and execution time are looking normal. why the page takes too much time to load at first time or it leads to proxy error?? Is anybody got same experience before??
Proxy Error
The proxy server received an invalid response from an upstream server.
The proxy server could not handle the request GET/pls/apex/f.
Reason : Document contains no data
Please guide me to find out and resolve this issue....
Thanks in Advance
Lakshmi

Hi this is what the solution given by your link
A.1.6 Connection Timeouts Through a Stateful Firewall Affect System Performance
Problem
To improve performance the mod_oc4j component in each Oracle HTTP Server process maintains open TCP connections to the AJP port within each OC4J instance it sends requests to.
In situations where a firewall exists between OHS and OC4J, packages sent via AJP are rejected if the connections can be idle for periods in excess of the inactivity timeout of stateful firewalls.
However, the AJP socket is not closed; as long as the socket remains open, the worker thread is tied to it and is never returned to the thread pool. OC4J will continue to create more threads, and will eventually exhaust system resources.
Solution
The OHS TCP connection must be kept "alive" to avoid firewall timeout issues. This can be accomplished using a combination of OC4J configuration parameters and Apache runtime properties.
Set the following parameters in the httpd.conf or mod_oc4j.conf configuration files. Note that the value of Oc4jConnTimeout sets the length of inactivity, in seconds, before the session is considered inactive.
Oc4jUserKeepalive on
Oc4jConnTimeout 12000 (or a similar value)
Also set the following AJP property at OC4J startup to enable OC4J to close AJP sockets in the event that a connection between OHS and OC4J is dropped due to a firewall timeout:
ajp.keepalive=true
For example:
java -Dajp.keepalive=true -jar oc4j.jar
Please tell me where or which file i should put the option
java -Dajp.keepalive=true -jar oc4j.jar ??????/

Desktop is taking too time to load icons, start menu, taskbar etc

Lot of users facing this issue, it is taking too much time to load their desktop items. it takes near to 10-15 minutes.
Can someone please let me know which type of changes are responsible for this?
~VST

Hi,
This is cause by these Possible reasons:
More Startup programs.
Any startup antivirus scan.
User profile corruption
ShellIconCache file may be corrupted
Please follow this guide to resolve this issue:
Desktop Icons loading very slow in windows 7
http://social.technet.microsoft.com/wiki/contents/articles/10608.desktop-icons-loading-very-slow-in-windows-7.aspx
Karen Hu
TechNet Community Support

Query taking much time Orace 9i

Hi,
**How can we tune the sql query in oracle 9i.**
The select query taking more than 1 and 30 min to throw the result.
Due to this,
We have created materialsed view on the select query and also we submitted a job to get Materilazed view refreshed daily in dba_jobs.
When we tried to retrive the data from Materilased view getting result very quickly.
But the job which we has been assisgned in Dbajobs taking equal time to complete, as the query use to take.
We feel since the job taking much time in the test Database and it may cause load if we move the same scripts in Production Environment.
Please suggest how to resolvethe issue and also how to tune the sql
With Regards,
Srinivas
Edited by: Srinivas.. on Dec 17, 2009 6:29 AM

Hi Srinivas;
Please follow this search and see its helpful
Regard
Helios

Taking much time when trying to Drill a characterstic in the BW Report.

Hi All,
When we are executing the BW report, it is taking nearly 1 to 2 mins then when we are trying to drill down a characterstic it is taking much time nearly 30 mins to 1 hour and througing an error message that,
"An error has occared during loading. Plese look in the upper frame for further information."
I have executed this query in RSRT and cheked the query properties,
this quey is bringing the data directly form Aggregates but some chares are not avalable in the Agrregtes.
So... after execution when we are trying to drill down the chars is taking much time for chars which are not avilable in the Aggregates. For other chars which are avilable in the Aggregates it is taking only 2 to 3 mins only.
How to do the drill down for the chars which are not avilable in the Aggregates with out taking much time and error.
Could you kindly give any solution for this.
Thanks & Regards,
Raju. E

Hi,
The only solution is to include all the char used in the report in the aggregates or this will the issue you will face.
just create a proposal for aggregates before creating any new aggregates as it will give you the idea which one is most used.
Also you should make sure that all the navigation characteristics are part of the aggregates.
Thanks
Ajeet

Discoverer report is taking much time to open

Hi
All the discoverer report are taking much time to open,even query in lov is taking 20 -25 min.s.We have restart the services but on result found.
Please suggest what can be done ,my application is on 12.0.6.
Regards

This topic was discussed many times in the forum before, please see old threads for details and for the docs you need to refer to -- https://forums.oracle.com/forums/search.jspa?threadID=&q=Discoverer+AND+Slow&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

SSRS Reports taking long time to load

Hello,
Problem : SSRS Reports taking long time to load
My System environment : Visual Studio 2008 SP1 and SQL Server 2008 R2
Production Environment : Visual Studio 2008 SP1 and SQL Server 2008 R2
I have created a Parameterized report (6 parameters), it will fetch data from 1 table. table has 1 year and 6 months data,      I am selecting parameters for only 1 month (about 2500 records). It is taking almost 2 minutes and 30 seconds
to load the report.
This report running efficiently in my system (report load takes only 5 to 6 seconds) but in
production it is taking 2 minutes 30 seconds.
I have checked the Execution log from production so I found the timing for
Data retrieval (approx~)    Processing (approx~)           Rendering (approx~)
10 second                                  15 sec
        2 mins and 5 sec.
But Confusing point is that , if I run the same report at different time overall output time is same (approx) 2 min 30 sec but
Data retrieval (approx~)       Processing (approx~)                Rendering (approx~)
more than 1 min                            15 sec
more than 1 min
so 1 question why timings are different ?
My doubts are
1) If query(procedure to retrieve the data) is the problem then it should take more time always,
2) If Report structure is problem then rendering will also take same time (long time)
for this (2nd point) I checked on blog that Rendering depends on environment structure e.g. Network bandwidth, RAM, CPU Usage , Number of users accessing same report at a time.
So I did testing of report when no other user working on any report But failed (same result output is 2 min 30 sec)
From network team I got the result is that there is no issue or overload in CPU usage or RAM also No issue in Network bandwidth.
Production Database Server and Report server are different (but in same network).
I checked that database server the SQL Server is using almost Full RAM (23 GB out of 24 GB)
I tried to allocate the memory to less amount up to 2GB (Trial solution I got from Blogs) but this on also failed.
one hint I got from colleague that , change the allocated memory setting from static memory to dynamic to SQL Server
(I guess above point is the same) I could not find that option Static and Dynamic memory setting.
I did below steps
Connected to SQL Server Instance
Right click on Instance go to properties, Go to Memory Tab
I found three options 1) Server Memory   2) Other memory   3) Section for "Configured values and Running values"
Then I tried to reduce Maximum Server memory up to 2 GB (As mentioned above)
All trials failed, this issue I could not find the roots for this issue.
Can anyone please help (it's bit urgent).

Hi UdayKGR,
According to your description, your report takes too long to load on your production environment. Right?
In this scenario, since the report runs quickly in developing environment, we initially think it supposed to be the issue on data retrieval. However, based on the information in execution log, it takes longest time on rendering part. So we suggest you optimize
the report itself to reduce the time for rendering. Please refer to the link below:
My report takes too long to render
Here is another article about overall performance optimization for Reporting Services:
Reporting Services Performance and Optimization
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Database tableAUFM hitting is taking much time even secondary index created

Hi Friends,
 There is report for Goods movement rel. to Service orders + Acc.indicator.
 We have two testing Systems(EBQ for developer and PEQ from client side).
 EBQ system contains replica of PEQ every month.
 This report is not taking much time in EBQ.But it is taking much time in PEQ.For the selection criteria I have given,both systems have same data(Getting same output).
The report has the follwoing fields on the selection criteria:
A_MJAHR Material Doc. Year (Mandatory)
S_BLDAT Document Date(Optional)
S_BUDAT Posting Date(Optional)
S_LGORT Storage Location(Optional)
S_MATNR Material(Optional)
S_MBLNR Material Documen(Optional)t
S_WERKS Plant(Optional)
Client not agrrying to make Material Documen as Mandatory.
The main (first) table hit is on AUFM table .As there are non-key fileds as well in where condition,We have cretaed a secondary index as well for AUFM table on the following fields:
BLDAT
BUDAT
MATNR
WERKS
LGORT
Even then also ,in PEQ sytem the report is taking very long time ,Some times not even getting the ALV output.
What can be done to get teh report executed very fast.
<removed by moderator>
The part of report Soure code is as below:
<long code part removed by moderator>
Thanks and Regards,
Rama chary.P
Moderator message: please stay within the 2500 character limit to preserve formatting, only post relevant portions of the code, also please read the following sticky thread before posting.
Please Read before Posting in the Performance and Tuning Forum
locked by: Thomas Zloch on Sep 15, 2010 11:40 AM

Hi Friends,
 There is report for Goods movement rel. to Service orders + Acc.indicator.
 We have two testing Systems(EBQ for developer and PEQ from client side).
 EBQ system contains replica of PEQ every month.
 This report is not taking much time in EBQ.But it is taking much time in PEQ.For the selection criteria I have given,both systems have same data(Getting same output).
The report has the follwoing fields on the selection criteria:
A_MJAHR Material Doc. Year (Mandatory)
S_BLDAT Document Date(Optional)
S_BUDAT Posting Date(Optional)
S_LGORT Storage Location(Optional)
S_MATNR Material(Optional)
S_MBLNR Material Documen(Optional)t
S_WERKS Plant(Optional)
Client not agrrying to make Material Documen as Mandatory.
The main (first) table hit is on AUFM table .As there are non-key fileds as well in where condition,We have cretaed a secondary index as well for AUFM table on the following fields:
BLDAT
BUDAT
MATNR
WERKS
LGORT
Even then also ,in PEQ sytem the report is taking very long time ,Some times not even getting the ALV output.
What can be done to get teh report executed very fast.
<removed by moderator>
The part of report Soure code is as below:
<long code part removed by moderator>
Thanks and Regards,
Rama chary.P
Moderator message: please stay within the 2500 character limit to preserve formatting, only post relevant portions of the code, also please read the following sticky thread before posting.
Please Read before Posting in the Performance and Tuning Forum
locked by: Thomas Zloch on Sep 15, 2010 11:40 AM

LOV is slow after selecting a value its taking much time to default

Hi,
I have a dependent LOV. Master LOV is executing fine and its populatin into the field fastly. But Child LOV is very slow after selecting a value its taking much time to default.
Can any one please help me if there is any way to default the value fast after selecting a value?
Thanks,
Mahesh

Hi Gyan,
Same issues in TST and PROD instances.
In my search criteria if i get 1 record, even after selecting that value its taking much time to default that value into the field.
Please advice. Thanks for your quick resp.
Thanks,
Mahesh

0CSM_USER_TEXT taking much time to load

Similar Messages

Maybe you are looking for