0FIGL_V10_Q0002 & Q0003 not getting any data.
Hi Experts,
I have activated business content for 3 queries (0FIGL_V10_Q0001,0FIGL_V10_Q0002 & 0FIGL_V10_Q0003) for a virtual Cube(0FIGL_V10).This virtual cube is based on infocube(0FIGL_C10) and i have data loaded into this cube.I get data for the first query but the second and third queries return with "No Applicable data Found"
What am i missing here?Is there any configuration that needs to be done for these 2 queries.
Please advice.Thanks in advance
hi
i am getting same isssue can i know how you solved it.
Thanks,
sneha
Similar Messages
-
SAP Fiori Purchase Order not getting any data & getting a 404 Error Message
Hi
I have downloaded Purchase Order SAPUI5 code from SAP Fiori server. import it into Eclipse then try to run that Apps/code(SAPUI5) from browser.
1) Not getting any Data.
2) It show 404 Error Message.
3) Its show wrong User Name as LoginHi Pankaj,
First question :
Are you able to get the data in Fiori ?
Secondly,
You have mentioned as Purchase order, but here you have given snapshot of Purchase requisition app, and you are calling also purchase req app from the browser. Please clarify
If you have mistakenly written PO : If you are still not getting data for Approve Purc req, then check if your RFC connections are proper from Gateway to backend and backend to Gateway.
If RFC is working fine, check the Remote logon, it should be marked as Current user. If its not marked as current user, then it will show some other user.
Regards,
Tejas -
Hi all,
We are trying to populate cubes(0CATS_C01) and (0CATS_C02) for which data sources are 0CA_IS_TS_1 and 0CA_IS_TS_2 respectively. We activated business content for these data sources. When we run these data sources in RSA3 we do not get any data even though we have data in the repective tables. We applied SAP Note :1586467, which says (Note 1586467 - Extractor 0CA_TS_IS_1 returns no data), Can you please help me out in knowing if we are missing some thing?
Thank you,
Bob.Hi,
To use this DataSource you must have implemented Support Package SAPKH46C32, or have made the relevant corrections in SAP Note 509592.
Pl check you have required data as mentioned below
When transferring time sheet data to the Business Information Warehouse (BW), you must note the connection between the following data sources:
· CA_TS_IS_1 (Time Sheet Data (Approved))
Documents are written in the SAP R/3 system for Time Sheets with status 30 (approved). The documents log the changes that have been made to data records.
Therefore, the SAP R/3 system can perform a delta update for this data source. The system only transfers newly approved data records and changes that have been made to existing data records. At the same time, the SAP R/3 system notes the date of the last delta transfer.
· CA_TS_IS_2 (Time Sheet Data (Released for approval))
The SAP R/3 system does not write documents for Time Sheet data with status 20 (released for approval). This means that changes made to these data records are not logged.
Therefore, the SAP R/3 system always performs a complete transfer of data records that have been released for approval. The number of data records that need to be transferred usually remains constant because in the period between two transfers not only new data records are added but other data records are also approved. Therefore, system performance is not restricted.
Thanks and regards -
XL Reporter not getting any data
<b>Hi</b>
When I am using XL Composer and generating report using it, I am getting data what the fields I have dragged. Not getting any data when generating same report in organizer from composer except the Title field names. Before I got but now I am not getting.
<b>STEPS Taken</b>
XL Reporter Composer Tool bar
Generate
Generate(Window)(Name: given Sample & checked Generate report then ok)
And having another problem when generating sample reports I am getting data and when editing that report are preparing new with some fields, I am not getting any data.
<b>Example:</b> I have made Edit of Bank Book and placed extra field Document No, saved the report and generated I am not getting any data except titled fields.
In new report I have taken BP Code and sales Employee I am not getting any data.
Please Can any one help me, It is urgent.
Thanks in Advance.
<i><b>Urs
Sindhu</b></i>If you did not select any "total" field (quantities, totals, etc), XL Reporter will show data only at report composer. It will not work at final XL Report itself.
This is a normal behaviour of XL Reporter, unfortunetaly.
If you are trying to create a simple list of records, I suggest to use Query Generator, combined to PLD in order to get a formatted report. -
Hi,
I am extracting data from 0fc_op_01.when i extracting data.i am able to see data in table and psa.when i check in rsa3 its showing zero records only.this is full load.
how can i solve this problem?i am working in bi7.Hi Amit,
I think these are not LO data sources and Setup tables concept is only for LO data sources. these data sources uses the following extraction structure and these will not support delta also
0PP_MD_CAPACITY_REQ -- >COCF_MD_S_CAPACITY_REQ
0PP_MD_CAPACITY_OPS ---> COCF_MD_S_CAP_OPS_DETAILS
Please check the data in Base tables, if you don't have data in base tables then you won't get it in RSA3.
Note: Once data source is active in your R3 system ,goto RS02 and give the DS name and display. here you will get all the details about DS.
Hope it helps
Regards,
Venkatesh -
Not getting any Data for Batch and storage Location for 2LIS_03_UM
Hi All,
My requirement is to extract Data from 2lis_13_vdkon from R/3 source system.
currently we are on R/3 PI 2003_1_470, For 2lis_13_vdkon we need to upgrade to PlugIn 2004_1.
we are planning to upgraded to Solution Tool 2008-1, will that be helpful or we need to upgrade to PlugIn 2004_1.http://help.sap.com/saphelp_nw70/helpdata/en/7f/0f8c4037fba62be10000000a1550b0/frameset.htm
Available from OLTP release
4.0 B
Delivery with
PlugIn 2004_1
Prerequisites
Prerequisite for the use of the extractor is the R/3 core SAP Note 673964 or the corresponding support package.
regards,
Colin -
Hi,
I have some ibots that I scheduled to run on a daily basis and which were working perfectly.
Suddenly the same ibots, they run but the content of the attachment says "The specified criteria did not return any data".
I checked the log files and could not see any relavant error.
If I go back in the report that I am sending through the ibot, it runs without any problem.
I tried to send it in different formats and run as different users, but the results are still the same!
Any idea what else I could check?
Type: Warning
Severity: 50
Time: Wed May 15 14:10:19 2013
File: project/webodbcaccess/odbcconnectionimpl.cpp Line: 199
Properties: RptPath-/shared/MICROS/giuliano/cube_build_verification;SID-btilnnapkfo2omg91a71b9m6n2;bindID-1;connID-31;ThreadID-4640;statementID-364;RSP-o:go~r:report
Location:
saw.odbc.statement.fetch
saw.subsystem.portal.pdf
saw.delivers.rpc.getDeviceContent
saw.rpc.server.responder
saw.rpc.server
saw.rpc.server.handleConnection
saw.rpc.server.dispatch
saw.threadPool
saw.threads
SQLFetchScroll returned code SQL_NO_DATA_FOUNDThanks it solved the issue.
But One more thing Now I have placed the parameters in the where clause of the query
Query-
select field1,field2,field3,field4,field5,job_name,candidate_name,interview_date from etc.ethr_irc_int_details
where field1 is not null
and job_name = :1
and candidate_name = :2
and interview_date = :3
in the VO I am executing
public void iniQuery(String S1, String S2,String S3)
System.out.println("insdie ini query of the VO");
System.out.println("S1 "+S1);
System.out.println("S2 "+S2);
System.out.println("S3 "+S3);
this.setWhereClauseParams(null);
this.setWhereClauseParam(0,S1);
this.setWhereClauseParam(1,S2);
this.setWhereClauseParam(2,S2);
executeQuery();
and in AM
ETHRIntDetailsVOImpl IDVO = (ETHRIntDetailsVOImpl)this.getETHRIntDetailsVO();
// IDVO.executeQuery();
// OAViewObject IDVO = (OAViewObject)findViewObject("ETHRIntDetailsVO");
IDVO.iniQuery(S1,S2,S3);
Row row = IDVO.first();
again I am not getting any data in the row??
Any idea if I am doing any thing wrong..
Please help urgently.
Thanks
Ashish -
ACS Report - User_Usage_Logon - not returing any data and the report never finishes
Hi,
i'm trying to run the User Usage report, but not getting any data output.
i tried to open the report in the report builder to check the query,, but the query is in XML format and i'm not able to figure out the actual query that pulls out the data.
i need help on the below :
1. way to check , if the ACS database , does actually have any data.
2. to pull out the actual query from the XML data.
thanks,
SameerHi,
As we only have one report experienced this timeout issue. Given this situation, we can try the following steps to narrow down the issue:
1.Run the report directly through SSRS report manager URL to test if we still get this issue.
2.If yes, increase the timeout limitation for this single report.
3.As for further investigation, we can enable SSRS verbose logging by referring to the following steps:
Enabling verbose log in Reporting Services Instance :
To enable the verbose logging for the Reporting Services instance you have to follow below steps.
Go to location
C:\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\ReportServer\bin
Find the ReportingServicesService.exe.config
file, make a copy first, and then open it in editor and change the below configuration.
<system.diagnostics>
<switches>
<add name="DefaultTraceSwitch" value="4" />
</switches>
</system.diagnostics>
<RStrace>
<add name="FileName" value="ReportServerService_" />
<add name="FileSizeLimitMb" value="32" />
<add name="KeepFilesForDays" value="14" />
<add name="Prefix" value="appdomain, tid, time" />
<add name="TraceListeners" value="file" />
<add name="TraceFileMode" value="unique" />
<add name="HttpTraceFileName" value="ReportServerService_HTTP_" />
<add name="HttpTraceSwitches" value="date,time, clientip,username,serverip,serverport,host,method,uristem,uriquery,protocolstatus,bytesreceived,timetaken,protocolversion,useragent,cookiereceived,cookiesent,referrer"
/>
<add name="Components" value="all:4,reportrendering:4,http:4" />
</RStrace>
You have to restart the Reporting Services from Reporting Services configuration manager.
4.After enable the verbose logging, reproduce this issue again by running the report, record the timestamp when we start the report, when the error popped up.
5.Then check SSRS log files at the following path, in the file which contain the issue time, check if there is any error message.
C:\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\LogFiles
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]. -
Dear Experts,
Today again I need your help gurus.
The Delta load is running everyday but its not getting any data to BW form CRM. But when the User raises an issue regarding the data , I pull the data by Repair Full load by some Selection ( Same selection of Delta + Transaction No ).
The selection(For Full Repair Load ) is only the Transaction No and the Sales Organization.
The selection for the normal Delta is Sales Organization ( 0CRM_SALORG ) 50000609.
But I am confused about the issue.
Kindly put some light on this issueu2026
Thanks,
SanjanaHi Sanjana:
Have you applied any SAP Note to fix this problem? Please check if the SAP Note below helps you in solving this issue.
Note 788172 - "CRM BW adapter: No data in delta with parallel processing"
Regards,
Francisco Milán. -
Scenario is HTTP to db. In HTTP client, when Sender is Business Component, Pi is getting data successfully but when Business system is used as sender Pi is not getting any message in sxi monitor. Please help
Hi Ankita,
Try to trace at ICM level, Go to smicm transaction
Set level to 3.
Later send your request. Finally trace the request in:
When you have seen the log, check if any exception is raised with your request or the request and share it here.
Regards. -
I am trying to reset my password for apple id. I entered my d.o.b. tells me info doesn't match. I tried reseting through email but am not
getting any emails to reset it. HELP!Go to the Apple ID Security site from http://support.apple.com/kb/HT5699 or call the AppleCare support number from http://support.apple.com/kb/HE57 and ask to speak with the Account Security Team...either can help you reset your questions/answers.
-
DataSource 0CRM_SRV_PROCESS_H is not getting the data in infopackage
Hi Masters,
I have to upload the data from the datasources 0CRM_SRV_PROCESS_H and 0CRM_SRV_PROCESS_I into Infopackages, but when i execute the infockage it shows
No data available
Diagnosis
The data request was a full update.
In this case, the corresponding table in the source system does not
contain any data.
System Response
Info IDoc received with status 8.
Procedure
Check the data basis in the source system.
In CRM system when i checked it in RSA3 it is showing the data.
I checked the older posts but i havn't find any answer post. I also checked the SAP note 692195, but it is applicable for 4.0. I am working on 7.0.
Please suggest something so that I can get the data into infopackage.
Thanks and Regards,
Vicky.Hi Lokesh,
Thanks for your reply.
Actually i am working on such a project where they don't give SAP_ALL authorization to any user. If we need any authorization we need to show them particular SAP note of same version in my case it is CRM 7.0. If you know any note on CRM 7.0 which gives all the authorization objects required or it says we need SAP_ALL authorization please tell me.
It will be very help full for me to get the authorization.
Regards,
Vicky. -
I am not getting the data in Bex from the cube
Hi Experts,
i am not getting the data from the cube to Bex,
cube having the data, but i am not able to see this data in the Bex result area.
Can any one help me.
Best regards,
BhaskarHi
In the manage cube, is reporting symbol is there for your requests
If you have any red requests delete them and refresh
If all requests having reporting symbols you may check the BEx without any filters or selection criterions
Regards
N Ganesh -
Iam not getting the data on screen after using the user exit zxpadu01
Dear Freinds
As per my requirement when the user enters value Ansal it should get defaulted to Amount field (bet01 ) based on the wage type
i have written calculation ( q0008-bet01 = ansal/100) before it getting defaulted to bet01, i found that value is not getting default on the screen for bet01 once i enter value for Ansal , please any body correct my code
in ZXPADU02 i have written the code as below :
data : wa_p0008 like p0008,
i0008 like p0008,
l_v_ANSAL type ANSAL_15,
l_v_amount type PAD_AMT7S.
CASE innnn-infty.
when '0008'.
CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
EXPORTING
prelp = innnn
IMPORTING
pnnnn = wa_p0008. -- HERE I GOT ALL THE DATA EXCEPT BET01
if wa_p0008-lga01 = 'MFPY'.
l_v_ansal = wa_p0008-ansal.
l_v_amount = l_v_ansal / 100.
move l_v_amount to wa_p0008-bet01.
CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
EXPORTING
pnnnn = wa_p0008 --- HERE I CAN SEE EVEN THE BET01 IS FILLED
IMPORTING
prelp = innnn. --- HERE I CAN SEE LGART BUT NOT AMOUNT VALUE
endif.
when others.
endcase.
IN ZXPADU01 I HAVE WRITTEN AS BELOW:
data : wa_p0008 like p0008,
i0008 like p0008,
l_v_ANSAL type ANSAL_15,
l_v_amount type PAD_AMT7S.
CASE innnn-infty.
when '0008'.
MOVE-CORRESPONDING innnn to wa_p0008.
CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
EXPORTING
prelp = innnn
IMPORTING
pnnnn = wa_p0008.
if wa_p0008-lga01 = 'MFPY'.
l_v_ansal = wa_p0008-ansal.
l_v_amount = l_v_ansal / 100.
move l_v_amount to wa_p0008-bet01.
CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
EXPORTING
pnnnn = wa_p0008 --- I CAN SEE ONLY WHEN I COME AGAIN
IMPORTING
prelp = innnn.
endif.
when others.
endcase.
Now my problem is as follows :
i have entered the value for Ansal (ex: p0008-Ansal = 1000) ..........and i say enter then i should found the calculated value for the ansal through my coding
and it should display in bet01 as 10 ( q0008-bet01 = p0008-ansal /100)
but i dont find the value 10 being displayed for the field bet01 on the screen when
user enters Ansal as 1000 .........even then i have saved it to test the scenario......
now i came in displayed mode (pa20 ) for the infotype 008 for the same personnel no for the same dates .....where i created the record........i found that the value
bet01 is there i.e i can see the value bet01 as 10 ( my requiremnt here matching)
but when the user say enter during the time of creation of the record the value
bet01 is not getting defaulted with 10 .........why iam not able to understand
PLEASE ANY BODY HELP ME IN THIS REGARD
regards
shanti.Hi Pranesh,
i have used the logic which you hav given as below
in ZXPADU02
FIELD-SYMBOLS <fs> TYPE ANY.
ASSIGN ('(MP000800)Q0008-betrg') TO <fs>.
if <fs> is assigned.
<fs> = l_v_amount . --- amount as (ansal /100 i.e 1000/100 = 10) 10
endif.
still iam not getting the data for the field bet01
this is the coding i am using
data : wa_p0008 like p0008,
i0008 like p0008,
l_v_ANSAL type ANSAL_15,
l_v_amount type PAD_AMT7S.
FIELD-SYMBOLS <fs> TYPE ANY.
CASE innnn-infty.
when '0008'.
MOVE-CORRESPONDING innnn to wa_p0008.
CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
EXPORTING
prelp = innnn
IMPORTING
pnnnn = wa_p0008.
if wa_p0008-lga01 = 'MFPY'.
l_v_ansal = wa_p0008-ansal.
l_v_amount = l_v_ansal / 100.
move l_v_amount to wa_p0008-bet01.
ASSIGN ('(MP000800)Q0008-betrg') TO <fs>.
if <fs> is assigned.
<fs> = l_v_amount .
endif.
CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
EXPORTING
pnnnn = wa_p0008
IMPORTING
prelp = innnn.
endif.
when others.
endcase.
please help me as iam still not getting (value in bet 01) when i press enter once i enter value in ansal feild.
regards
shanti. -
Product Revenue Bookings and Backlog Dashboard does not display any data
Product Revenue Bookings and Backlog Dashboard does not display any data even though the load completed successfully.
They are able to see just the parameters.
Not sure if the upgrade of the database from 9.2.0.6 to 10.2.0.3 is a factor.
What can I check?
Is there some table to verify that the data exists for display in the Product Revenue Bookings and Backlog Dashboard?
Screenshot is at:
https://gtcr.oracle.com/gtcr-dir/gtcr_5637/6415786.993/Product_Revenue_Bookings_Backlog_Dashboard.doc
Support suggested to create a new request set and run the initial load with load all summaries option; but there was no change in the Product Revenue Bookings and Backlog Dashboard.
Any ideas?hi
We have faced the similar problem after the upgrade to 10G
What we did was
Ran the initial load of time dimension, Item setup request set, and the request set of all the dash board in the clear and initial load mode..
we were able to get the data once the clear and load is completed successfully
Regards
Ramesh Kumar S
Maybe you are looking for
-
Iphone 5 and IOS 6.0.2 is draining my battery! (new thread)
Well, apparently Apple doesn't want us to talk about this -- They locked the previous forum I had created after 217 posts and 16k views? I'll assume there is some other Apple Forums rule that I don't know about that would cause them to do that instea
-
I upgraded to 3.6.8 and now pages won't load, connection times out.
I open Firefox on my desktop. Takes forever to load my google home page, or sometimes it says connection timed out. When I try to get to websites it either takes forever, or I get a message saying connection timed out, and/or the error message proble
-
Error occured while trying to access desktop:
Hi All, I've search all the threads I can find on here and tried everything they have suggested but to no avail. I have a customer desktop which is working in Dev/QA, it's now gone into Production and I get: Error occured while trying to access deskt
-
How to add an customized HR infotype in personnel information on ESS
Dear Experts, I am trying to add a customized HR infotype in personnel information on ESS. Could you pls provide me some solution or references document. Thanks Daniel
-
StageWebView not displayed in Flash Pro Air Mobile Simulator (if render GPU)
Hi guys - just wasted too much time with this - thought I'd mention it here - may help someone in future. I've got a mobile app which uses StageWebView for a news/info page. However my app is mainly graphics so I use GPU render mode. When I test the