0Material problem

Hi Frieds
I have one small query
I am using the 0matrial infobject in various cubes.
All the cubes are in production.Now i got a requirement to add few attributes to the 0material.
Is that possible to change the 0materail attributes in development and transport it to Production.
One more query are there any difference in bw 3.0 business content activation and Bw 3.1 business content activation.
Thanks a lot for your support.
Regards
vijay

Hi,
Yes its possible to transport additional attributes to <b>0MATERIAL</b>. Just ensure that you also modified the <i>Transfer Rules</i> to populate the new attribute otherwise, the new attribute is useless.
You may want to do a <b>RE-INIT/FULL LOAD</b> just to fill this new Attribute with data.
Hope I have helped. If I did, please grant points...
--Jkyle

Similar Messages

  • Problems when maintaining 0MATERIAL

    Hi,
    I have found a problem with 0MATERIAL characteristic. when you double-clic on it, a message displays:
    "Settings for material number conversion not found"
    And the create/maintain infoobject shows all the text boxes blank.
    ¿does any one knows what is happening?
    thanks for the help.
    Mauricio

    Hi.......
    Try oss note 555675, it tells you to use transaction OMSL.
    Symptom
    One of the following errors occurs:
    1. The following message appears when you create or schedule an InfoPackage: RC = 4'.
    2. When you display the 0MATERIAL InfoObject or when you use the InfoObject  in a query, the message 'Settings for the material number conversion do not exist' appears (message number BMG 135).
    3. When you display the master data for the 0PRODUCT InfoObject in transaction RSD1, the 'Setting for the material number conversion does not exist' (message number BMG 135).
    4. The error message BMG 135 is written to the log when you execute the after-import method of an InfoSpoke. The transport receives the return code 8.
    Other terms
    BMG135, MATN1, conversion exit, OMSL, TMCNV, InfoSpoke, transport
    Reason and Prerequisites
    There are no settings for the material number conversion.
    Solution
    Make the settings for the material number conversion.
    In BW Release 2.1C, the settings are maintained for the material number conversion via report RSCC_V_TMCNV.
    As of BW Release 3.0A, the settings are maintained for the material number conversion via transaction OMSL.
    Select the same settings as the settings made in the OLTP system.
    Note that you must also perform the setting in client 000 if the error occurred while you were importing a transport request.
    Hope this helps.......
    Regards,
    Debjani.......
    Edited by: Debjani  Mukherjee on Oct 21, 2008 7:20 AM

  • Problem with deleting old master Data from 0Material

    Hello, we try to delete the master data from 0Material.
    But we get the message that some data are used and can not be deleted.
    We can see the error message in slg1:
    "Master data 000000000100000007 (SID                                                   7) is used in /BI0/HMATERIAL; is not deleted"
    "Master data R23188 (SID                                                5316) is used in /BI0/D0RT_C071; is not deleted"
    Can we just clear these tables? Is it enough for resolving the problem?
    Thank You.

    Hi,
    no you just can't "clear" these table unless you want to screw your datawarehouse....
    the first message means that the material with SID 7 is used in a hierachy of 0MATERIAL ==> adjust the hierarchy first.
    the second message indicates that the material with SID 5316 is used in the ICube 0RT_C07 and you CANNOT delete master data if it is used in other objects.
    First run RSRV for this dimension in order to see if the DIMID is really used by the fact table. Perform the following test "Entries Not Used in the Dimension of an InfoCube " with your cube and dim.
    if the DIMID is not used then "correct" the error; you'll then be able to delete your SID.
    If the DIMID is used then you'll have to delete your cube data if you really want to delete this material; otherwise you'll have to keep it.
    Finally rerun you master data deletion.
    hope this helps...
    Olivier.
    Edited by: Olivier Cora on Jul 31, 2008 9:07 AM

  • 0material data deletion and uploading Problem

    Hi to all,
    I have already deleted the transcational data.
    and now I want to delete master data from 0material infoobject with SIDs option
    a information box will appear
    SOME MASTER DATA CANNOT BE DELETED
    and if u confrim the dialog box
    another dialog box will appear
    The system is unable to delete all of the specified master data, because some of it is still in use
    See log:Object RSDMD, sub-object MD_DEL
    and also if u delete without SIDs option
    still same the information will come.
    The system is unable to delete all of the specified master data, because some of it is still in use
    See log:Object RSDMD, sub-object MD_DEL
    can any one tell me why we cant delete complete master data.
    or is there any solution for that.
    also
    if i have loaded master data from R3 Quality to 0material infoobject and now i want to load the data from R3 production .
    so does i need to delete the previous R3 Quality data first before loading the R3 Production data in 0material.
    Does it will overright 0material  R3 quality data from R3 production data.
    and if R3 quality data is different from R3 production data , does still it will over right.
    Please cany any one suggest me what to do and why.
    I shall be thankfull to yo for this.
    Regards
    Pavneet Rana

    Hi Pavneet,
    Check the below points might help you
    As you said the system prompted u 'some master data cannot be deleted' .. continue with this message.
    Next goto tcode SLG1-- enter Object: RSDMD and Subobject: MD_DEL and User: ur userID and F8
    In the next screen Expand node and dbl click 'Problem class additional information'
    This will give u which ever objects using SIDs of this master data.
    U should delete this SID according to that list.
    Then U should delete particular data from DSO/Cubes.
    Once data deleted from cube, then
    Use Tcode RSRV -> Tests in Transaction RSRV -> All Elementary Tests -> Transaction Data -> Entries Not Used in the dimension of an InfoCube (Dbl Click)
    From the right side window, expand u201CEntries Not Used in the Dimension of an InfoCubeu201D Node &
    Enter InfoCube (like 0SD_C01), click u201CTransferu201D
    Now, click u201CExecuteu201D (Toolbar)u2026 and the results displayed in the right side window..
    Now, click u201CCorrect erroru201D

  • Problem charging 0MATERIAL INFOOBJECT Hierarchy from R/3 into BW

    Hi everyone,
    I'm having this problem when trying to load data into this infoobject's hierarchy. The problem is that i'm recieving an information IDOC  with status 8. it's message says that the table that the process is trying to get the data from in R3 is empty. but it's not telling me wich R3 table it is.
    Does anyone know wich table is that?
    And maybe someoneknows how to insert the hierarchy data on it?
    I prefer a standard solution, but it's no problem to do a Z extractor for it. Tesource system is retail but i don't know if it really matters.
    Tank-you!
    Artur.

    Hi,
    This means Hierarchy structure is not maintained by R/3 people and they need to maintain the R/3 hierarchy.
    please check it out in KCh3 t.code to see the Hierarchy subculture of this.
    We also got the  same in RSA3 when runned for some Infoobject 0comp_code hierarchy.
    Are u getting any Hierarchy while running in Rsa3 t.code or not getting anything.
    Please letme know to comment on this issue.
    Regards,
    Anand Tej.

  • PROBLEM WITH 0MATERIAL

    hi
    i am trying to open 0material at rsa1
    i am getting this message please let me knmow
    Settings for material number conversion not found 
    wher can i do settings

    Hi,
    You will have to manage it in SPRO settings for it.
    go to SPRO->Implementation guide->search set Material number Display
    you can do the same in t-code OMSL
    Here, add Length 18 leave blank the template and make check box ON for leading zeros.
    and save it.
    Thanks
    Ajeet

  • Error While activating 0Material(BI7)

    Dear Gurus,
                     I am trying to Activate 0Material Infoobject after deleting a Navigation attribute(Classification characteristics) ,the system throws a error " Error while activating Type Info object".And when i navigated to the Detailed error message it says " error : Internal Activation(info object) - error while converting master data tables .Can anyone help me out with this.
    manythanks
    arun

    Dear gurus,
                     We posted the error message to SAP and they have replied " while we deleted the attributes from the Info object(0material) it broke the D-Version of the Object and so to Transport the Info object from another Working system to the Problem(Dev)system ,Install and then activate".
    1). Does it mean we can install them object in PRODUCTION Server and then transport to the Development.???
    2). Now i tried installing 0Material in RSORBCT in Produciton,but gets a message "Cant make any changes in the repository-changes in this client prohibited".  Guys could u help us with this??
    manythanks
    arun

  • Problem with '-' (dash) in BEx web analyzer

    Hi All,
    we are having a strange problem with 0BPartner and 0Material. Our BPartner and Material have '-'(dash) sign as part of key. While selecting this BPartner/Material in Bex Analyzer, we do not have any problem, but when we try to select the same Bpartner/Material in BEx Web Analyzer, it puts an escape char in from of the dash. For eg:
    If i select the Bpartner "1234-5467" then in Web Analyzer selection box, it is displayed as  "1234\-5467" in the selection screen.
    If i do a search on 1234-5467, it returns zero value.But if i do a search on 1234\-5467, then i get the search hit.
    If i enter the Bpartner in the selection window directly and If i do not put the escape char, then it considers the input as range 1234 - 5467 and returns me no value in the report output.
    Has anyone had this type of issue? Please respond.
    Thanks
    Niveda

    Thanks Olivier,
    Sorry if you had misunderstood my question. They are 2 different Info objects. and i am having problem searching values in each one of these info objects.
    Let me explain it with an example.
    Scenario:
    Let say company defines material in the following format.
    "123", "456", "788", "345"....etc.
    And I have a report which has material as input selection.
    To run this report with single material i enter "123" in the selection screen
    To run this report with a range of materials, I need to enter 123 - 456 in the selection.
    I have no Issues
    Scenario 2.
    Consider a case if the materials are defined in SAP as "001-1234", "987-234"
    "123-234" etc.
    In this scenario, to run the same report for 1 material, i will enter 001-1234. But now the question is how will BW system interpret this material entry.
    Is this 1 single material(001-1234) or a material range (001 - 1234)??
    We have issue here. The system considers this material "001-1234" as a range (001 to 1234) instead of single material and gives me zero output.
    Any help??
    Niveda

  • Error Message in Query Filter on attribute of 0MATERIAL filters charac.

    Hi All,
    i have a query with few variables , i used navigational attributes of 0material......
    I am getting the below Warning Message...  Ineed to supress the below Error Message....
    Please let me know the solution...
    Error Message: Filter on attribute of 0MATERIAL filters charac. values without master data
    Diagnosis
    Currently, it cannot be guaranteed that SIDs and master data exists for all characteristic attributes for the DataStore object to be read.
    There is a restriction on a navigation attribute of the listed characteristic in the query. This filters all characteristic values of the master-data bearing characteristic for which there is not yet master data out of the result.
    For performance reasons, this filtering is unavoidable.
    System Response
    Procedure
    In case of doubt, find other restirctions directly on the characteristic values of the characteristics contained in the DataStore object.
    Procedure for System Administration
      Notification Number DBMAN 345 
    Thanks All

    Dear all SAP Gurus,
    we've solved this problem and this is the solution:
    The warning is triggered by the method CL_RSDRV_ODS_QUERY-PROCESS_SFC_WITH_ATR when the BExFlag of the InfoProvider is not set. Using DSOs for direct update there is no change to change the BExFlag. As a result queries based on a DSO for direct update always throw the above mentioned warning when filter-characteristics are attributes.
    Regards, Clemens

  • Error DBIF_PGNT_SQL_ERROR while activating 0MATERIAL

    Hi All,
       I am stuck with a problem. I added 0MATL_GRP_2 in 0material as attribute and did changes in R3 for the same. Then I replicated data source 0material_attr and changed transfer rule while activating i got error DBIF_PGNT_SQL_ERROR  : SQL error 3113 occurred when accessing structure description. I tried 2 -3 times but got the same error. for testing I tried to activate 0material in background and come up with the similer error DBIF_PGNT_SQL_ERROR : SQL error 3113 occurred when accessing structure description "/BI0/PMATERIAL ".  Then I tried to activate /BI0/PMATERIAL with SE14 but got same error. Then I tried function module DD_TABL_ACTM but again same error. i am clueless where is the problem. Is it something related to table space. Please guide.
    Regards:
    Jitendra

    Hi Shailesh,
        Please have a look over ST22 dump. I habe removed unnecessary portion.
    Short text
    SQL error 3113 occurred when accessing structure description "/BI0/PMATERIAL".
    User and Transaction
                                                                                    |
    Program............. "SAPLSDNT"
    Screen.............. "SAPMSSY0 1000"
    Screen line......... 6
    Information on where terminated
    Termination occurred in the ABAP program "SAPLSDNT" - in "DD_PUT_NAMETAB".
    The main program was "RSDG_IOBJ_ACTIVATE ".
    In the source code you have the termination point in line 64
    of the (Include) program "LSDNTU10".
    The program "SAPLSDNT" was started as a background job.
    Job Name....... "IOBJ_ACTIVATE"
    Job Initiator.. "SUPPORT"
    Job Number..... 15182300
    Source Code Extract
    Line
    SourceCde
    34
    <KH> 19961118 Feld DBASE füllen
    35
    perform set_ntab_version using x030l_wa.
    36
    37
    Gibt es schon inaktive Nametab?
    38
    select * from ddxtt where tabname = x030l_wa-tabname.
    39
    inactiv_exists = 'X'.
    40
    endselect.
    41
    Falls es inaktive gibt, müssen die Timestamps abgemischt werden.
    42
    AW aber nicht wenn eines von beiden modeflag 'D' hat.
    43
    <KH> 19970507: Kein Abmischen, wenn Nametab-Typen unterschiedlich
    44
    if inactiv_exists = 'X' and not ( ddxtt-modeflag eq 'D' or
    45
    modeflag eq 'D' ).
    46
    move-corresponding ddxtt to x030l_2.
    47
      if x030l_2-tabtype = x030l_wa-tabtype and
    48
         x030l_2-tabform = x030l_wa-tabform.
    49
    perform max_tmstmp
    50
    using    x030l_wa-abstamp x030l_2-abstamp
    51
    changing x030l_wa-abstamp.
    52
    perform max_tmstmp
    53
    using    x030l_wa-dystamp x030l_2-dystamp
    54
    changing x030l_wa-dystamp.
    55
    perform max_tmstmp
    56
    using    x030l_wa-crstamp x030l_2-crstamp
    57
    changing x030l_wa-crstamp.
    58
      endif.
    59
    endif.
    60
    61
    AKTIV schreiben. Ggf. löschen der inaktiven NT inkl. TATAF-Code
    62
    63
    if status eq 'A'.
    >>>>>
    system-call export nametab x030l_wa x031l_tab id x030l_wa-tabname.
    65
    if sy-subrc ne 0.
    66
    message id 'DA' type 'E' number '304' raising write_error.
    67
    elseif inactiv_exists = 'X'.
    68
    if no_inact_del = ' '.
    69
          Lösche die inaktive Nametab
    70
    delete from ddxtt where tabname = x030l_wa-tabname.
    71
    delete from ddxtf where tabname = x030l_wa-tabname.
    72
    endif.
    73
        PW281293
    74
        Löschen von TATAF (modeflag E, V) bzw. TBATG (modeflag U) macht
    75
        die form check_modeflag
    76
    perform check_modeflag using    x030l_wa-tabname
    77
    ddxtt-modeflag
    78
    space       "dummy-modeflag
    79
    changing s_modeflag.
    80
    endif.
    81
    endif.
    82
    83
    INAKTIV schreiben
    Regards:
    Jitendra

  • Error while loading from R/3 TO BW  ie 0material error

    my is leela,
                 hai i am BW CONSULTANT.i got some problem in
    loading s.d billing document ie 2lis_13_vahdr (billing document header data).the problem is i got 0material error
    ie some characterisics are entered in material field.
    these are ERSTE HILFE AND COACHING. these two are inserted in that field.i copied these once and executed in RSKC t.code ,but it is not accepting ,so pls kindly go through this ,give me a solution for this error .thank you.bye my mail id is [email protected]

    Leela
    Welcome to SDN
    Your 0Material has incorrect Data in R/3 system. Now you have two options
    1 Ask your R/3 team to correct this in R/3 who is responsible for this material.
    2 In BW correct it in PSA and load it to cube/ODS
    Hope this helps
    Thanks
    Sat

  • Problem in Uploading Data From R/3 Prod to BW Development

    Hi Friends,
    When i transfer master data from R/3 prod to Bw prod,it upload data to infobject what i schedule first.if i schedule for second infobject,it remains in processing.
    Eg: I upload 0Division and 0Material from R/3 prod to Bw prod.If i schedule 0divisionfirst, it will update data.If I schedule next to 0Material,in monitor it shows "(0 records from 0) ".If i restart the Bw prod and i update 0material then it will update.again for next infobject it shows "(0 records from 0)".if i restart Bw Prod it solved.but the same problem for other infobject.
    Waiting for your inputs.
    Thanks in advance.Have a great day
    Rgds,
    Suren.

    Hi Surendhar,
        Did you try to check the connection b/w ypur source system and the target system?
    You can do it by executing T.Code RSA1-> Select Source Systems-> Right click your source system-> Check.
    Also, pls check ST22 for any short dumps and SM21 for system logs.
    Hope it helps!!!!
    Amit
    Message was edited by: Amit

  • BI Report Export Problem - Selection data missing

    Hi all,
    I´m pretty new to Web reports and now I have a problem which might be easy to solve for you experts.
    The problem appears when exporting a report. If the user exports the report to PDF or Excel, the data is exported correctly but the selection settings, that the user set, are missing. Only the field name are shown, but not the selected item. Its somewhat of a cosmetical problem, but important to the users.
    Interestingly enough, we use many other templates which have the exact same functionality and where it works correctly.
    I compared the XML on code on those templates, but there is no major difference.
    Here is the important code (at least in my understanding) of the template:
    <bi:param name="BUTTON_LIST" type="ORDEREDLIST">
                                      <bi:param name="BUTTON" type="COMPOSITE" index="1">
                                        <bi:param name="CAPTION" value="PDF">
                                        </bi:param>
                                        <bi:param name="ACTION" type="CHOICE" value="INSTRUCTION">
                                          <bi:param name="INSTRUCTION">
                                            <bi:command type="EXPORT">
                                              <bi:param name="ITEM_REF_LIST" type="UNORDEREDLIST">
                                                <bi:param name="ITEM_REF" index="1" value="TEXT_ITEM_9">
                                                </bi:param>
                                                <bi:param name="ITEM_REF" index="2" value="INFO_FIELD_ITEM_2">
                                                </bi:param>
                                                <bi:param name="ITEM_REF" index="3" value="ANALYSIS_ITEM_1">
                                                </bi:param>
                                              </bi:param>
                                              <bi:param name="FOOTER_LEFT" value="DATE">
                                              </bi:param>
                                              <bi:param name="FOOTER_RIGHT" value="PAGEOFPAGES">
                                              </bi:param>
                                            </bi:command>
                                          </bi:param>
                                        </bi:param>
                                      </bi:param>
    <bi:item name="INFO_FIELD_ITEM_2" designheight="50" designwidth="300" type="INFO_FIELD_ITEM">
                              <bi:param name="DATA_PROVIDER_REF" value="DP_1">
                              </bi:param>
                              <bi:param name="INFORMATION_ELEMENT_LIST" type="ORDEREDLIST">
                                <bi:param name="INFORMATION_TYPE" type="CHOICE" index="1" value="VARIABLE">
                                  <bi:param name="VARIABLE" value="IP_VERS_CM01" text="Plan Version">
                                  </bi:param>
                                </bi:param>
                                <bi:param name="INFORMATION_TYPE" type="CHOICE" index="2" value="CHARACTERISTIC_LIST">
                                  <bi:param name="CHARACTERISTIC_LIST" type="ORDEREDLIST">
                                    <bi:param name="CHARACTERISTIC" index="1" value="0G_CWW010" text="ProdGr">
                                    </bi:param>
                                    <bi:param name="CHARACTERISTIC" index="2" value="0MATERIAL" text="Material">
                                    </bi:param>
                                    <bi:param name="CHARACTERISTIC" index="3" value="0PROFIT_CTR" text="Planning Unit">
                                    </bi:param>
                                    <bi:param name="CHARACTERISTIC" index="4" value="469EIDJHD8W7F786UEL29ZJVV" text="Country Statement">
                                    </bi:param>
                                    <bi:param name="CHARACTERISTIC" index="5" value="ZXCO_NAV3__ZXCO_BUSN" text="BusSeg Nav">
                                    </bi:param>
                                  </bi:param>
                                </bi:param>
                              </bi:param>
                            </bi:item>
    Any input and hints are appreciated.
    Regards,
    Harald

    Hello Harald,
    As per my understanding, the particular characterisitc is not assigned and that could be the reason for displaying only field name. Please lookinto it.
    all the best,
    Kind regards,
    Praveen

  • Error in Installing 0MATERIAL.

    Hi All,
       We have new BW server.We are trying to intalling info objects 0MATERIAL, 0VENDOR, 0COSTCENTER from Business Content.
    We getting error while activatind 0MATERIAL. Error is "0APO_LOCNO" is not active. We tried to activate "0APO_LOCNO" alone still it's not proceeding further.
    Any suggestions.
    Thanks in Advance.
    Ravi.

    Hi Ravi,
    You say it's a new server, have you installed all the support packages? If not your problem may be related to e.g. note 656282?
    Regards, Klaus

  • Hierarchy problem in BEX

    Hi,
    Our 0material is loaded with hierarchy prdha, also
    0prod_hier_attr is loaded-activated and 0prod_hier infoobject is loaded-activated as well.
    The weird thing (unless for me) is that in bex only some 0materials have a data in hierarchy attribute; we check 0material records and the hierarchy is there same in 0prod_hier... the problem is only in the query.
    Please some advices??
    Thanks In Advance

    HI Neetu..
    Please check the settigns of the infoobject in use..u need to select text and key for the description in buisness explorer tab of \inoobject definition

Maybe you are looking for

  • Final Cut Pro 6 - 'Out of Memory/Error Code'

    Hey All, I'm in the final stages of editing a documentary and I keep running into an 'Out of Memory' error code in Final Cut Pro 6.0 when trying to export a reference file. The finished film is 81 minutes long and contains 19 sequences. I have all 19

  • Mail won't save rules

    I've upgraded to Mountain Lion and now all my mail.app rules are missing. Worse, I can add a new rule, close and then reopen the app,  and the newly created rule is gone. Any ideas? Mark Allison

  • 'SELECT_LIST_FROM_LOV' giving error if LOV fetches 47 rows

    Hi All, We are using 'SELECT_LIST_FROM_LOV' function to create dynamic items in a tabular form. It works fine when LOV fetches < = 47 rows but is giving 'buffer overflow error' if it fetches more! Any help/suggestions would be appreciated. APEX Versi

  • In case you want to see Dry Creek Photo gamuts

    I haven't gone to the Dry Creek site to view their wire frame gamuts in quite a while, but when I did a month or so ago, I couldn't view them because my old Cortona viewer wasn't compatible with Mac anymore, so I did  a search and found several Mac 3

  • What is the program can run this flash

    hi all, I download some flash from this funny site http://www.funny-pictures.com/ but i can't run it in my computer , means my computer not my browser , i run it only into flash programs as flash editor or macromedia flash 6 (open it and click file m