0x0000007B error message after installing Portege R500 XP OEM Recovery CD

I have a R500 with 64 GB SSD and Vista preinstalled.
I try to downgrade Vista with a R500 XP Pro OEM Recovery CD.
Decompression to the SSD works fine - but during the first initial XP Pro boot I receive a blue screen with a 0x0000007B error message and some hints regarding virus infection?
What causes this problem?

Hi
In my knowledge the R500 supports an SATA HDD controller and you have to include the SATA driver into the Win XP CD using the nLite software.
The SATA driver is a part of the Intel Storage Manager which could be found on the Toshiba European driver page or on the Intel page.
By the way; check this forum and use the search option to find more threads regarding the Intel Storage Manager and how to use the nLite and to include the SATA driver.
Here are enough threads about this theme.
Cheers

Similar Messages

  • TS1717 I get the following error message after installing the latest version of itunes via auto update:  "the itunes Library file cannot be saved. An unknown error occurred (-54). Has anyone ever seen this message and anyone have a suggestion what to do?

    I get the following error message after installing the latest version of itunes via auto update:  "the itunes Library file cannot be saved. An unknown error occurred (-54). Has anyone ever seen this message and anyone have a suggestion what to do?

    Hi pholewinski!
    I have a couple of articles for you here that I believe will help you with this issue. The first is an article on advanced troubleshooting, and it can be found here:
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/ts3297
    If following that article's steps doesn't take care of the issue, you can try the things listed in this article, which is about permissions issues in iTunes:
    iTunes: Missing folder or incorrect permissions may prevent authorization
    http://support.apple.com/kb/TS1277
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • Error Message after installing Photoshop & Illustrator (CS2) on new iMac

    When I launch Illustrator or Photoshop (both CS2) on my new iMac 2.8 GHz, I get the error message: "Connection Failed. server may not exist or is not operational at this time. Check the server name or IP address and your network connection and try again."
    I click OK and they open, but this behavior is getting OLD. I've uninstalled and re-installed and I continue to get the error every time I open these applications. It only happens with Illustrator and Photoshop. I'm in the process of transferring all my files and apps from my old G4 which is connected via ethernet. I've de-activated and removed the old copies on the G4. Does anyone know what is causing this error message and how I can remedy the situation? Thanks for your help.
    (24" 2.*GHz Core 2 Duo iMac / OS 10.5.6 / 2 GB memory)

    I've just done almost exactly this. Moved to a brand new imac runnning Leopard, (but I've got the newer model imac - 4Gb, 2.93 Ghz 10.5.6) and not yet bought CS4.
    I installed both Illustrator and Photoshop CS2 from the disc (migrating didn't work, suprise suprise so I just wiped everything off and started with a clean install) but both still refused to start until I'd repaired permissions. After I did that it worked fine.
    Even using Rosetta, Photoshop CS2 seems to be faster than on the G5 imac I've just replaced (especially using an external firewire 800 drive as a scratch disc). And no apparent bugs so far.

  • Error message after installing 10.8.2 update

    After installing the osx 10.8.2 update the mok resrtarts and give a error message: "the update could no be installed" or so. As I look up in the system info the update appears al isnatlled. Why?

    I'm another user with same issue, started right after the upgrade, appears consistently with login/out, sleep/wake, rarely otherwise. 
    ? some launchd process calling usereventagent which then crashes
    Application Specific Information:
    *** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '-[__NSCFNumber length]: unrecognized selector sent to instance 0x5088002c7'
    abort() called
    terminate called throwing an exception
    This is on a 2.66 GHz Quad-Core Xeon.  No similar issue with my Air which I also upgraded to 10.8.2, so I suspect it's a launchd process installed by something which I and others have added that gets run at login and logout (and less frequently at other times).

  • Adobe reader has stopped working error message after installing reader XI on windows 7

    Adobe reader has stopped working error message when loading reader after installing reader XI on windows 7.
    Does anybody know why ?

    Dear Pat,
    Thank you for your reply.
    It is Ver. 11.0.06 for Acrobat XI
    No, I can't open the Reader at all.  The error message box popped up immediately when I run the Reader

  • Error Messages after Instaling 10.6.2

    After installing !0.6.2 I get the following error messages--System extension cannot be used. The system extension"/System/Library/Extensions/hpPluginInit.kext" was installed improperly and cannot be used.Please try reinstalling it or contact the products's vendor for an update --- Second Message---System extension cannot be used.The system extension"System/Library/Extensions/CDSDAudioCaptureSupport.Kext" was installed improperly and cannot be used. Please try reinstallingit or contact the products vendor for a update,
    Every thing appears to be operating OK.Should I delete the extesions or what repair should I implement to correct the problem
    Thanks A Lot For Your Help

    Trying to update with the latest drivers didn't do me any good.
    HP has the worst software and horrible update instructions.
    This is the page that purports to having the latest for snowleopard
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadInst?swfsequence=1&lc=en&dlc= en&cc=us&lang=en&softwareitem=oj-74786-1&os=219&product=3737195
    I found I had to specifically delete the offending file "hpPlugInInit.kext" before I no longer received that error message.
    HP also has this firmware update:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-71331-1 &lc=en&dlc=en&cc=us&lang=en&os=219&product=3737195
    There are no instructions telling me if this has or has not been included in my printer.
    I'm guessing at the instructions, and I'm going to run the program. But who know at the success.
    I'm never buying another HP anything. Especially if Apple offers me a "deal" on it.

  • Error Messages After Installing Leopard 2

    After installing Leopard from the Install DVD, I used Software Update to update to 10.5.1, and updated QuickTime, etc. I also ran Cocktail, the Leopard edition. The Hard Drive checked out OK. When I ran Repair Permissions in Disk Utility, I got a number of error messages. One set starts like this: "Warning SUID file "System/Library/Private Frameworks/DiskManagement.framework/Versions/A/Resources/DiskManagementTool" has been modified and will not be repaired."
    There are a number of messages like this. What shall I do?

    Download and install this update, even though you've already updated.
    (26492)

  • Error message after installing CS6

    After installing CS6 from disk error message said, "Some items for the following product(s) could not be installed successfully." The message then listed five of the eight applications in CS6. I can't find any info about where to go to identify and resolve the issue. Please advise.

    Check the install logs for errors and then use the below link to troubleshoot accordingly.
    http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html
    Installer Log Locations:
    mac: /Library/Logs/Adobe/Installers/[Adobe Application name<date>].log.gz
    win: c:\Program Files\CommonFiles\Adobe\Installers\[Adobe Application name<date>].log.gz

  • Anyone getting this pop up error message after installing Lion?

    After installing Lion I now get random pop up error messages that say...There was a problem connecting to the server. URL's with the type "file" are not supported. I have to keep closing them. Any ideas what to do?

    Actually, In my case, turning off Time Machine didn't help. I had the same problem. We definitely traced it to Time Machine. The "Fix" was this: plugged in and designated different external HD as Backup volume. Then unplugged it and plugged in the original disc (after testing in in a different machine) and now the computer recognized it and error message stopped popping up. The Apple tech was as puzzled as I as to why this worked, but perhaps, forcing the machine to re-recognize it (or maybe even gettting it recognized by a different machine first) somehow worked some magic.

  • Error message after installing latest FlashPlayerPlugin

    After installing FlashPlayerPlugin_11_9_900_117.exe with the downloaded install file install_flashplayer11x32_mssd_aih.exe when I open Firefox and go to another tab I get this error message:
    The exception unknown software exception (0xc0000710) occurred in the application at location 0x.......... (this is different each time) Click OK to terminate the program.
    I do this and everything seems to work OK but I keep getting the error message each time I open Frirefox and move to different pages.
    What can I do to fix this problem?

    Hi - I've just uninstalled Flash Player 11.9 and installed archived version 11.8.800.168 as advised in your FixNow Support. At 72 years of age I find having to put things like this right on my laptop is usually most confusing,
    but it has solved the problem simply and easily!
    Thank you so much!

  • Error message after installing external zip drive

    After installing a replacement zip drive (and accompanying software from CD), I'm confronted with a periodic error message advising that hardware has not been closed properly disk ejected prior to removal? I'm not removing anything--the zip disk is remaining in the external drive. I've turned off all power, rebooted and reinserted USB connections and the error message keeps coming up periodically. Iomega web site isn't much help. An suggestions, please. Thanks.

    Thanks for your quick reply!  I was wondering if anyone would reply!
    I made the copies on a suggetion that the original may be scratched or something so I figured what the heck?  I did format the hard drive though.  It is a Seagate 500gb hard drive.  I only formatted the whole drive and figured that the restore disks would make the additional partition.
    Aside from that, it's the same error message that I had on the original drive.  The original drive and OS works (Vista), but I wanted to restore it because I just wanted to wipe everything and start clean.  What can be causing the error message, and what IS the error message?
    Anymore suggestions or help would be great as I am in desperate need of getting my computer back to working.
    Thanks again for replying!

  • Error message after installing iTunes 8.1 plc help

    After have installed iTunes I get an error message saying: The folder "iTunes" cannot be found or created, and is required. The default location for this folder is inside the "My Music" folder.
    Now I've tried to creat the folder manually, but that doesn't work either
    have any of you had this problem too?
    I've tried removing it and re-installing iTunes 15 times...

    In XP, this us usually caused by a registry problem, See:
    http://support.apple.com/kb/HT1866
    Sometimes My music does not show up in TweakUI. If that happens see:
    http://discussions.apple.com/thread.jspa?messageID=1731188&#1731188
    But be careful it involves editing the registry.
    If iTunes installed, you may be able to work round this with a shift key start.
    Hold down the shift key and start iTunes. Keep holding the shift key until you are prompted to choose or create a library
    If you already have an iTunes folder containing a library, navigate to it and choose iTunes Library.itl. Otherwise create a library in My Music.
    (the shift key is the one that makes upper case letters)

  • Error message after installing CCP

    Hi Guys,
    After i inatalled the CCP 2.8, i keep on having an error message  saying " CCP requires internet explorer java plug-in 1.6.0_11 or above, see attached. I installed the Java 1.7 and keep on receiving the same error.
    I am actually running Win 8.1 on my PC.
    Could someone help me with this, please?
    Thanks in advance,
    Regards,
    Ovigo

    Hi David,
    I have followed the instruction it doesn't work, and after i uninstalled / reinstalled and at the end of the installation i got that message that i attached for the system check, which look OK, then after i disable the firewall and double check again your recommendation and i got the same error message.
    Any additional comment will be greatful.
    Thanks in advance.
    Regards,
    Ovigo

  • Error Message after Installing "Proteus"

    Hi Folks -
    After installing of Instant Messenger "proteus" and starting of the software I got follow Error Message:
    Last login: Sun Jun 11 18:00:58 on console
    /Applications/Proteus.app/Contents/MacOS/Proteus; exit
    Welcome to Darwin!
    peter-walthers-computer:~ PeterWalther$ /Applications/Proteus.app/Contents/MacOS/Proteus; exit
    Proteus(249) malloc: * vm_allocate(size=3221225472) failed (error code=3)
    Proteus(249) malloc: * error: can't allocate region
    Proteus(249) malloc: * set a breakpoint in szone_error to debug
    Bus error
    logout
    [Process completed]
    Can someone help me?
    MacBookPro   Mac OS X (10.4.6)  

    It's entirely possible that Proteus is simply not Rosetta friendly, and it's not a universal binary. Nevertheless, you should contact the developer for support since these forums do not provide third-party software or hardware support.
    There are alternative clients such as AdiumX and Fire that are universal binaries and are similar functionally to Proteus.

  • CS5 error message after installing Genuine Fractals 6

    I've just installed Genuine Fractals 6 into CS5 and when I launch PS, I get the following error message - see screen grab.
    I've now removed GF but I still get the error message. Anyone know how to rectify this?

    Since my prior message I have installed 6.0.6 into Photoshop CS5 on Windows 7 x64 and I do not see the error you are describing.  Perhaps there are several different CoreFoundation.dlls on your system, and Genuine Fractals is accessing the wrong one.
    Is yours the 6.0.6 version?  And are you seeing it in 32 bit Photoshop or 64 bit or both?
    What is your operating system?
    Sounds like their installer didn't remove everything it installed.
    If it can help you to remove all the files, these are the files it installed into my Photoshop 32 bit folder, all having a Mod date of 5/31/2010.  Note that there are several more beyond the list shown above:
    "C:\Program Files (x86)\Adobe\Adobe Photoshop CS5\CoreFoundation.dll"
    "C:\Program Files (x86)\Adobe\Adobe Photoshop CS5\glut32.dll"
    "C:\Program Files (x86)\Adobe\Adobe Photoshop CS5\icudt42.dll"
    "C:\Program Files (x86)\Adobe\Adobe Photoshop CS5\icuin42.dll"
    "C:\Program Files (x86)\Adobe\Adobe Photoshop CS5\icuuc42.dll"
    "C:\Program Files (x86)\Adobe\Adobe Photoshop CS5\onOneGF6StandardCheck.dll"
    "C:\Program Files (x86)\Adobe\Adobe Photoshop CS5\onOneToolbox2.dll"
    "C:\Program Files (x86)\Adobe\Adobe Photoshop CS5\onOneWelcomeDialog.dll"
    "C:\Program Files (x86)\Adobe\Adobe Photoshop CS5\OnOneWidgets.dll"
    "C:\Program Files (x86)\Adobe\Adobe Photoshop CS5\Plug-ins\Genuine Fractals 6.0.plugin\GFAutomation.8li"
    "C:\Program Files (x86)\Adobe\Adobe Photoshop CS5\Plug-ins\Genuine Fractals 6.0.plugin\GFFilter.8li"
    "C:\Program Files (x86)\Adobe\Adobe Photoshop CS5\Plug-ins\Genuine Fractals 6.0.plugin\GFFormat.8li"
    "C:\Program Files (x86)\Adobe\Adobe Photoshop CS5\Plug-ins\Genuine Fractals 6.0.plugin\GFStandardMenu.onli.dll"
    "C:\Program Files (x86)\Adobe\Adobe Photoshop CS5\Plug-ins\Genuine Fractals 6.0.plugin\onOneActivationToolbox.dll"
    "C:\Program Files (x86)\Adobe\Adobe Photoshop CS5\Plug-ins\Genuine Fractals 6.0.plugin\onOneWelcomeDialog.dll"
    "C:\Program Files (x86)\Adobe\Adobe Photoshop CS5\Plug-ins\Panels\onOne\onOne Palette Config.txt"
    "C:\Program Files (x86)\Adobe\Adobe Photoshop CS5\Plug-ins\Panels\onOne\onOne.jsx"
    "C:\Program Files (x86)\Adobe\Adobe Photoshop CS5\Plug-ins\Panels\onOne\onOne.swf"
    Make sure all of the above are removed.
    Also, you should try resetting your prefs (Ctrl-Shift-Alt immediately after starting Photoshop).
    -Noel

Maybe you are looking for

  • Automatic creation of intercompany PO when creating a Sales Order

    Hi Experts Is there a standard way of triggering an intercompany PO when creating a sales order to the final customer (or the other way around, triggering a sales order to the end customer upon creation of an intercompany PO)? Scenario: business has

  • Is there a way I can just pay apple to reset my restrictions password?

    I have forgotten my restrictions password for my my iPad air.  I tried restoring it but It is save to icloud and won't let me reset/change it. Is it possible that I can just pay apple to fix it? I also have the same Apple ID on my 5s and restrictions

  • Cannot resize windows from all sides? Just the 1 corner??

    Hi all, I've just switched back to Mac in the past year after 6 years with Windows. While in no way do I prefer windows overall, I cannot understand why Mac has not made all four sides of a given window 'grabbable' for resizing. This is a massively i

  • Uninstalling BPC excel version client in silent mode

    Hi, Does anyone get (or know) a procedure to uninstall the BPC client 7.0M SP06 in silent mode ? Best regards. Sylvie Drouet.

  • Media Encoder corrupted output

    Media Encoder reports successful encode. The logs report no errors. In fact the only output is 2 intermediate work files, video only and audio only, the correct audio-visual output file is not there. The attached JPEG screen print shows the 2 file ty