1.4 - Important sites will not work & why are the AIM / Facebook contacts integrated with my phone contacts?

Two issues I am having with my phone.
1 - Before upgrading to the 1.4 software patch, I was able to visit some sites that I use regularly, one being www.hotschedules.com. I bartend and use my phone to look at my weekly schedule but now it will not work. Just to test it, I used a buddies phone who had not upgraded to 1.4 and the site opened JUST FINE!
2 - I want to use facebook and AIM on my phone but for some (stupid?) reason, ALL of my facebook and aim contacts get listed in the SAME LIST as my phone contacts. I do NOT want to scroll through hundreds of contacts to find someone. Yes I know there are shortcuts but why even do this in the first place?

Hello eculley and welcome to the forums;
I attempted the website you mentioned, and it loaded fine on 1.4.1.1 on my Sprint Pre. We did identify some issues with websites on 1.4, and this should be resolved with 1.4.1. I know 1.4.1 is not available for Verizon yet, however it should be available soon.
As for Facebook contacts, they show in the Synergy contact list by design, so that you can see all of your contacts in one master list. If you do not want those contacts showing in your Contacts app, you can open Preferences & Accounts for contacts and remove any account you don't want to see contacts for.
Hope this helps!
TreoAide

Similar Messages

  • Good Morning, Are there any other donotfollow plug-ins or add ons for the version 4 of Firefox? The one available on your site will not work with version 4. Thank you.

    I am starting to affiliate market and need a donotfollow plug in or add on and the one available on your site will not work with version 4 of Firefox. Is there another place I can go or do you have another add on that will perform the same function as the do not follow you have on your site for the previous versions of Firefox? Any help would be greatly appreciated.

    OK - to answer my own question, Apple recommend 8.2.1, but you can install 9.1.1 and it will run on a G3. Very slowly. Looks like this is the only option. Get it here: http://support.apple.com/kb/DL1036. You need OSX 10.4.11 or later though....

  • I reinstalled microsoft word and now have a copy that will not work that is the default

    I reinstalled microsoft word and now have a copy that will not work that is the default

    I have MS word 2008 for MAC version 12.1
    When I left click the MS word applications that is the default seems to be corrupted as indicated by the message below but when I right click i can select the second MS word application that works.  The message from the left click is
    Process:         Microsoft Word [10367]
    Path:            /Users/geralddowling/Library/Mail Downloads/Microsoft Word.app/Contents/MacOS/Microsoft Word
    Identifier:      com.microsoft.Word
    Version:         ??? (???)
    Build Info:      Unknown-80409~0
    Code Type:       X86 (Native)
    Parent Process:  launchd [128]
    Date/Time:       2011-07-25 17:25:09.413 -0400
    OS Version:      Mac OS X 10.6.7 (10J869)
    Report Version:  6
    Interval Since Last Report:          166920 sec
    Crashes Since Last Report:           5
    Per-App Crashes Since Last Report:   5
    Anonymous UUID:                      1C5621D4-1D85-488D-A24C-CB298759DBC6
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Crashed Thread:  0
    Dyld Error Message:
      Library not loaded: @executable_path/../Frameworks/MicrosoftComponentPlugin.framework/Versions/12/M icrosoftComponentPlugin
      Referenced from: /Users/geralddowling/Library/Mail Downloads/Microsoft Word.app/Contents/MacOS/Microsoft Word
      Reason: image not found
    Binary Images:
    0x8fe00000 - 0x8fe4162b  dyld 132.1 (???) <A4F6ADCC-6448-37B4-ED6C-ABB2CD06F448> /usr/lib/dyld
    Model: iMac10,1, BootROM IM101.00CC.B00, 2 processors, Intel Core 2 Duo, 3.06 GHz, 8 GB, SMC 1.53f13
    Graphics: ATI Radeon HD 4670, ATI Radeon HD 4670, PCIe, 256 MB
    Memory Module: global_name
    AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 2.1.14.5
    Bluetooth: Version 2.4.0f1, 2 service, 19 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: ST31000528ASQ, 931.51 GB
    Serial ATA Device: HL-DT-ST DVDRW  GA11N
    USB Device: Keyboard Hub, 0x05ac  (Apple Inc.), 0x1006, 0x24300000
    USB Device: Cruzer Mini, 0x0781  (SanDisk Corporation), 0x5150, 0x24310000
    USB Device: Apple Keyboard, 0x05ac  (Apple Inc.), 0x0220, 0x24320000
    USB Device: Built-in iSight, 0x05ac  (Apple Inc.), 0x8502, 0x24400000
    USB Device: Internal Memory Card Reader, 0x05ac  (Apple Inc.), 0x8403, 0x26500000
    USB Device: IR Receiver, 0x05ac  (Apple Inc.), 0x8242, 0x04500000
    USB Device: Back-UPS ES 750 FW:841.I3 .D USB FW:I3, 0x051d  (American Power Conversion), 0x0002, 0x06400000
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x06100000
    USB Device: Bluetooth USB Host Controller, 0x05ac  (Apple Inc.), 0x8215, 0x06110000

  • I updated Firefox but now it says it will not work b/c the application may be damaged or incomplete. What can I do. It worked perfectly before I updated the app.

    I updated Firefox but now it says it will not work b/c the application may be damaged or incomplete. What can I do. It worked perfectly before I updated the app.

    Hello, terrygav. 
    I would recommend processing a reinstall of Mavericks.
    OS X Mavericks: Reinstall OS X
    http://support.apple.com/kb/PH13871
    Make sure to backup all of your data prior to reinstalling OS X 10.9.
    Back up your Mac
    http://support.apple.com/kb/PH11371
    Cheers,
    Jason H.

  • My Macbook Pro keyboard AND USB keyboard will not work.  However, the trackpad and USB mouse will work.  Any help?

    My Macbook Pro keyboard and USB keyboard will not work.  However, the trackpad and USB mouse will work.  Any help?
    This is quite frustrating, since it randomly occured as I was browsing the web.  It seemed to happen out of nowhere.  I cannot login to my user account because I cannot type my password. 
    Any help will be appreciated.
    -Matt

    If you have another Mac, boot the non-working one into Target Disk Mode (holding down "T" at startup). Hook up the two Macs via a Firewire cable. The non-working one will mount on the other Mac as an external Firewire HD.
    Next, download the 10.5.6 Combo update from here:
    http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx1056comboupdate .html
    Run it. When it asks you for a destination, choose the other Mac that was mounted via Firewire. When it's done, unmount the computer and restart it. The keyboard and mouse should work now.

  • HT3209 Purchased DVD in US for Cdn viewing. Digital download will not work in Cda or US? please help with new Digital code that will work

    Purchased DVD in US for Cdn viewing. Digital download will not work in Cda or US? please help with new Digital code that will work

    You will need to contact the movie studio that produced the DVD and ask if they can issue you a new code valid for Canada. Apple cannot help you, and everyone here in these forums is just a fellow user.
    Regards.

  • Hi all, Since I updated to Mavericks I am having trouble with Safari showing all the buttons/clickable options, but they are gray and will not work. Specifically, the Trash Can/Delete and the "Move to" folder button simply do not work. Any ideas?

    Hi all, Since I updated to Mavericks I am having trouble with Safari showing all the buttons/clickable options, but they are gray and will not work. Specifically, the Trash Can/Delete and the "Move to" folder button simply do not work. Any ideas?

    Please post a screenshot that shows what you mean. Be careful not to include any private information.
    Start a reply to this message. Click the camera icon in the toolbar of the editing window and select the image file to upload it. You can also include text in the reply.

  • My 2011 IMac will not boot up past the White apple logo screen with the whirly circle

    My 2011 IMac will not boot up past the White apple logo screen with the whirly circle. I have tried various commands but to no avail. does anybody have any advice?

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
    a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
    b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a startup failure can be resolved by resetting the NVRAM.
    Step 4
    If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
    Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
    If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
    If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
    Step 9
    If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.   
    Step 10
    Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 11
    Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
    Step 12
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 13
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • I want to hand on my water damaged and not working iPhone are the notes that were on the handset accessible to anyone who can get the handset working again?

    I want to hand on my water damaged and not working iPhone are the notes that were on the handset accessible to anyone who can get the handset working again?

    It's possible, I suppose.   Unlikely, but possible.   Someone would have to be extremely driven to fix your broken phone specifically to look at your notes though.

  • Using XP Professional SP 3 with latestest version of Firefox, the US Airways web site will not work properly. I can still make it work with MS IE

    I am using XP Professional SP 3 with newest version of Firefox, the US Airways web site does not work. I can make the site work with MS Internet Exp. What do I need to change to make Firefox work?

    Can you clarify in which way the site isn't working?
    Can you attach a screenshot?
    *http://en.wikipedia.org/wiki/Screenshot
    *https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
    Use a compressed image type like PNG or JPG to save the screenshot.
    Create a new profile as a test to check if your current profile is causing the problems.
    See "Basic Troubleshooting: Make a new profile":
    *https://support.mozilla.org/kb/Basic+Troubleshooting#w_8-make-a-new-profile
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
    If the new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
    See:
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • The import window will not expand to access the import button

    the import window will not expand past the cancel button. can not access the import button.

    Can you post a screen grab illustrating what you are experiencing.
    Tony

  • Report a broken website on firefox help does not work- why does the action bar keep scrolling when i click submit

    the broken website link is not working for me - the "submit toolbar just keeps scrolling until I give up and navigate to another site. recently my leftside bookmarks display keeps highlighing one website ''''''''Live Internet Seismic Server '''''''' even when i don't click on it

    This problem was also reported in question 774215 as a problem that the user encountered after trying to report his primary problem. See https://support.mozilla.com/en-US/questions/774215. FWIW.

  • I down loaded the latest version on my iphone , not the phone will not work... the itune icon is on the screen with a plug symbol showing to plug in ....phone wont work ...help please

    I just down loaded the latest version to my iphon5s. Everything seemed to go well. Now the phone will not work. The screen has the iTunes icon on it with a arrow showing to plug in. its locked up  wont do anything . Turned on and off , the same picture shows up ...help please

    Your phone has entered recovery mode.  You will need to connect it to a computer with iTunes and restore it to factory settings.  Hopefully you have a backup (either iTunes or iCloud) to restore from.
    HTH

  • Can Someone PLEASE Tell Me Why My Muse Site Will Not Work Upon HTML Export?

    Sorry for the long title!
    I've had a few threads going regarding troubles with my Muse site. These issues have been on-going, and once I was no longer able to upload to Fetch—and had to export to html via FileZilla—it just seems the problems continue to snowball.
    I have a web site. I will disclose the URL here now: www.jamescdarling.com
    When this site was html-based (its original form), using my yahoo small business web host and Fetch, it worked like a charm. All Flash files functioned at 100%, embedded videos/players all played great, etc. Then, I switched over to Muse 1.) because I was excited by the potential, and 2.) I wanted to re-design my site, anyway.
    So, I created my site in Muse, and uploaded it all into Fetch. I soon found that some of my Flash files and videos were not working. This was the case for a long time. I finally gave up after trying everything and asking lots of questions here.
    Just recently, I set out to fix these issues as I was afraid this half-assed site would appear to make me look unprofessional and like I had no idea how to use Flash. I had some problems with the new Muse Update (had to ditch Fetch and use "export with html" using FileZlilla). Changes made to my Muse file were not taking... and each time I viewed my updated site, the updates were not there—it still looked like the previous incarnation of the site. However, with some help from some of the good folks here, I was able to make my site not only update, but work nearly perfectly—or so I thought!
    I just clicked on my personal web site URL link in my LinkedIn page, and I see the old-looking site! The bookmark I have of my site is near-perfect—only the videos still will not load. However, it would seem that my site only functions as well as it does on MY computer only—that is, URL's I have been sending out probably are of the old non-functioning site? The changes I make are not being recognized.
    If you will, click on my above URL (in bold)..... If you click on "Resume", you should see light blue rules separating each section. But I bet you will see heavier gray bars with headers inside them. Also, if you view my Flash work, go to the "Epiphone Casino Mini Site".... the "Finshes" and "Features" pages' interactive elements will not function as they should (never mind the video page!)—but they work perfectly when accessing my site from my bookmark on my computer.
    Can someone please tell me how to make my site update web-wide, and how to get my Flash files to function?
    Thanks!!!
    Message was edited by: darling67

    It seams a lot of folks are haveing issues with FTP upload. Try these areas to look at. Maybe the right answer. I dont use Flash on my sites for a long time now. Anyhow, check these out.
    http://tv.adobe.com/watch/muse-feature-tour/adobe-muse-publishing-and-managing-your-site/
    http://www.adobekb.com/using_3rdparty_ftp.html#usingftp-understandinghowftpworks

  • Since upgrading to 3.6.15 my java certificate on a banking site will not work. (It still works if I go into Explorer) HELP please !

    This applet / certificate is used to authorise business banking transactions and is sent from the bank concerned, saved on my laptop and then the internet banking uses is it when I go to authorise an instruction. Since upgrading firefox it will not find the certificate and shows error message DIGITAL SIGNING PROCESS FAILED. However if I log out of banking, go to Internet Explorer, login to the banking again, do the transaction then when it calls for the certificate it loads and works perfectly. My choice is to work in Firefox so please advise what I can do rectify the issue. Many thanks

    Please click the '''Solved''' button next to the answer that solved your question.

Maybe you are looking for