1 app, 3 devices, 1 iCloud - how can I run the same game on different devices?
My wife and I share one iTunes account and one iCloud account for 2 iPhone 5's and an iPad. Our home laptop is a PC running windows 7. We are not able to both play the same game (specifically Carcassone) at the same time on different devices which is frustrating, how can I make this happen? Do I need two separate accounts? Can I have two accounts with a PC? We don't want to sacrifice the photostream to get it though.
Thank you,
Jacob
Go to iTunea>Preferences>Devices and see if there is a backupright at the time you did the update. Then try restoring from that backup. If the apps are in your iTunes library, any app data will be restored to the iPod.
When restoring from an iOS 4 (or later) backup, if the device had a passcode set, iTunes will ask if you want to set a passcode (and remind you that you had protected your device with a passcode). iTunes will not ask you to set a passcode when restoring from iOS 3.x and prior backups.
Therefore, remembe the passcode that you enter this time.
It appears that if you restore from a backup, that backup is not subseqyently overwritten by the next backup.
Similar Messages
-
Hi
I have about 1000 contacts on my iPhone 4 after syncing with iCloud there are only about 120 contacts on iCloud How can I have the same info on both the iCloud and my iPhoneOn the iPhone tap Settings > iCloud
Switch Contacts off then back on then reset the device.
Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears. -
How can I use the same Game Center name on my iPad and my iPhone?
Is there any way to use the same Game Center name on two devices?
If you signed into Game Center in Settings > Game Center on both devices with the same Apple ID, you should have the same name in both centers.
-
How can all of the same subscriber in different instance get the meesages?
Hi
I am using MDB to recieve messages from publisher, used for event and notification, I deploy same MDB into different instance, if there is a event, the publisher will publish a message, and all subscribers in different instance are supposed to get the message, but reffer to the message flow, only one of these MDB will recieve the messages.
One solution is to have different clientID for these MDB in different instances. But unfortunately, the value for clientId should be constant expression.
Here is my code, any suggestion?
@MessageDriven(mappedName = "cluster_publisher_adm", activationConfig = {
@ActivationConfigProperty(propertyName = "acknowledgeMode", propertyValue = "Auto-acknowledge"),
@ActivationConfigProperty(propertyName = "subscriptionDurability", propertyValue = "Durable"),
@ActivationConfigProperty(propertyName = "clientId", propertyValue = "test"),
@ActivationConfigProperty(propertyName = "subscriptionName", propertyValue = "myTest"),
@ActivationConfigProperty(propertyName = "destinationType", propertyValue = "javax.jms.Topic") })
public class TopicListener implements MessageListener {
public TopicListener() {
}How can I have all the MDB in different instances to get the same messages?I presume you are using Glassfish and Glassfish Message Queue, and that your Glassfish instances are clustered. If so, then if an MDB (listening on a topic) is deployed into the cluster, each message will indeed be delivered to one MDB per cluster rather then to one MDB per instance. This is a feature known as "shared subscriptions".
If you are using Glassfish 2.1.1 or 3 (but not earlier versions) you can disable this using an activation spec property. Take a look at the latest documentation at
http://docs.sun.com/app/docs/doc/821-0027/aeooq?l=en&a=view&q=activationspec
and scroll down to the new property "useSharedSubscriptionInClusteredContainer". You need to set this to false.
Nigel -
How can I use the same session for different components acroos application ?
I am trying to include the components(chat, filesharing, whitboard) in different parts of my application. User should be able to access any of the component. We would like to have a single "ConnectSessionContainer" so that we don't see same user creating a seperate session for each component.
Is there a better way of dealing with this other than declaring the "ConnectSessionContainer" in the main application ? Is there a way to check if we have a "ConnectSessionContainer" session already established ? Please help . Thanks.Thanks for the response. Let me explain what I am trying to do..
I am trying to create components at different places(screens) of the flex application (not in the same .mxml file).
Each time I create a component, I am using a "AdobeHSAuthenticator" and "ConnectSessionContainer" which is resulting a new participant in the room.
For example
screen1.mxml -
<mx:Panel>
<rtc:AdobeHSAuthenticator id="auth" authenticationSuccess="onAuthSuccess(event);" authenticationFailure="onAuthFailure(event);" />
<rtc:ConnectSessionContainer id="mySession" >
<rtc:Roster id="myRoster" width="100%" height="100%" />
<rtc:Chat id="mychat" width="100%" height="100%" />
</rtc:ConnectSessionContainer>
</mx:Panel>
screen2.mxml (in the same application) -
<mx:Panel>
<rtc:AdobeHSAuthenticator id="auth" authenticationSuccess="onAuthSuccess(event);" authenticationFailure="onAuthFailure(event);" />
<rtc:ConnectSessionContainer id="mySession" >
<rtc:SharedWhiteBoard id="wb" width="100%" height="100%" />
</rtc:ConnectSessionContainer>
</mx:Panel>
Here, I open a screen1 and authenticate as UserA and when I try to open screen2 flex is considering me as another user though I am in the same application.
1) How can I use different components which are in different flex files as a same User ?
2) Should I place my <rtc:AdobeHSAuthenticator> and <rtc:ConnectSessionContainer> in the main application which calls the screen.mxml?
3) What is the best way to do it ?
Thanks for your time ! -
How can I run the "Find my Iphone" app in my Itunes?
How can I run the "Find my Iphone" app in my Itunes?
Find my iPhone App can only run in iPhone and not iTunes. If you have activated iCloud and set Find my iPhone to ON, you can sign in to https://www.icloud.com to run Find My iPhone there.
-
My Ipad and macbookair have been stolen. How can I find the imei code of both devices considering that were all registered on icloud?
Unless you have configured iCloud on the MacBook Air and made sure that Find My Mac was turned on, you can't track that. And even if you did do that, that is not a foolproof method of tracking, as it relies on the thief connecting to the internet using the guest account on the machine and not getting in to your account and disabling Find My Mac or wiping the hard drive and installing a clean system.
As for the iPad, similar rules apply there. If it is a wifi-only iPad, it cannot be tracked any other way. If it has 3G, your wireless carrier may be able to help you track it. -
I have 528 contacts on my phone, but only 290 on my Icloud how can i move the rest over from my phone to my Icloud nothing is working
Go to Settings>iCloud, turn Contacts to Off, choose Delete from My iPhone when prompted (they will still be in iCloud).
Download the app My Contacts Backup to your phone. Use this app to backup the remaining contacts on your phone (from your exchange account) as a vCard attachment to an email that you send to yourself. Confirm that you have received the email on your phone.
Go to Settings>iCloud and turn Contacts back to On.
Go to Settings>Mail,Contacts,Calendars>Default Account (in the Contacts section), set this to iCloud. (This will cause new contacts added to your phone to be added to the iCloud account.)
Go to Settings>Mail,Contacts,Calendars...tap your exchange account and turn off contacts syncing (otherwise you will end up with duplicates on your phone).
Open the My Contacts Backup email and tap the attachment to import the contacts from your exchange account back to your phone. They will be added to iCloud and appear on icloud.com and any other devices syncing contacts with your account. -
I was trying to get the iOS 8.2 on my iPhone 5 but then it stopped and my phone is now on recovery mode I have pictures I need and they did not all fit on iCloud how can I use the phone again with ALL my pictures and videos without restoring it?
Contacts are designed to be synced to a supported application on the computer or a cloud service.
Pictures taken with the device are designed to regularly be copied off the device to a computer as would be done with any digital camera.
If you have failed to use the device as designed it may be too late to recovery anything.
Is the device regularly backed up to a computer via iTunes? If so, the most recent backup (when restored to a replacement iOS device) should contain all contacts and pictures as of when the backup was created. -
If I have an apple ID for myself and my wife has just got a iPhone for the first time how can she get the same apps as I have for my iPhone and iPad by getting it off my iCloud?
She can't from iCloud without setting up your iCloud account on her phone. But just sync the same apps from your iTunes Library on your computer to her phone.
Your wife should setup her own iCloud account - which is separate to the iTunes Store accounts. -
i turned iCloud back up off for all the games on my iPad, now i want to turn it back on but, now they have all disappeared from my apps in iCloud, how do i turn the back up on those specific apps back on?
I'm trying to get them to transfer to another iPad for my kid.atoo2 wrote:
I just did the IOS8 update on my Ipad retina which had 300 photos it asked me to do an iCloud back up which i did but it deleted all my previous photos and now i only have recent photos how do i get back all my old photos? It said befor that my icloud was out of storage but i didnt know it didnt have my old photos, they arnt back up on itunes either is there any way I can get them back?
Please see the bold. If you're out of icloud storage, then you won't be able to backup to icloud unless you purchase more storage, but yet you said you backup to icloud.
If you really did backup to icloud no data would be loss - sounds to me that it didn't backup since you had no more free icloud storage space.
iCloud: iCloud storage and backup overview -
How can i run the example programme without hardware
Hi,
We are using NI-9233 for our Project. We would like to run the example programme, the NI-9233 getting started(host).vi ... I would like to ask that how can i run the Programme without Hardware.& How shall i get the input signal (simulating signal)?because we would like to test it while we are waiting for the hardware to be delivered .
thanks
Best regardsAs Mike indicated , " you can use MAX to simulate some (not all) DAQmx devices. There's a NI-USB-9233 device that you can probably use. Open MAX, then expand "My System", the expand "Devices and Interfaces", then right-click on "NI-DAQmx Devices" and select "Create New NI-DAQmx Device -> NI-DAQmx Simulated Device". Select the device from the list. See the online help for MAX for further help.
If you don't see "NI-DAQmx Devices" in MAX you need to install NI-DAQmx. You can download it from NI here. "
hi,
the link you gave me to download is "NI-DAQmx Devices" ... There is no software to download for Labview 8.2.1. So should i use 8.1 or 8.3 instead of 8.2.1 ? If not, can you tell me the CD no. that includes the "NI-DAQmx Devices" folder of Labview 8.2.1 version? Because we can get the cd from our school's component store. Thank you so much.
Best Regards,
Su -
How can I run the report for different input values at the same time?
Reports version: Report Builder 6.0.8.13.1
Oracle version: Oracle8i Enterprise Edition Release 8.1.7.0.0
I want to run the same report for different input parameter values and spool each o/p to different file and ftp to a server. For this, as a first step, I am spooling different input values in to a file, reading those values through a loop and calling the report for that input values. Each report run/execution is taking 15 minutes. Total report execution is taking approximately 4 hours (assuming 16 different input values) to complete. So I have to wait 4 hours to see ALL outputs.
I would like to run the report parallel for ALL the input values and I should be able to see the ALL outputs with in 15 or 16 minutes.
In my shell script, I added & symbol at the end of the report call to start/run the job in the background. Due to this the control passed to the next step after the report call. At this place I have an ftp command to send the output file to a different server and it is giving error some thing like o/p file is not available/created yet". This is due to the fact that report writer is NOT yet completely started/initiated or it is NOT completed the spooling.
How can I run the report at the same time for all the input values and save the time?
Thanks in advance.
Kishore.Increase the number of server engines running right now it seems there is only one engine running ,increase it to 4 or 6
and then atleast 4 or 6 reports will run simultaneously.
For FTPing the output add to your sript to check whether it is locked and if not then only try to ftp .
Also for more better functionality read the document (chapter 15 ) for 10g reports for its new fuinctionality.
http://download.oracle.com/docs/cd/B14099_17/bi.1012/b14048/toc.htm
Thanks
Subodh -
Help:How can I run the J2EE Client Application? Thanks
Help:How can I run the J2EE Client Application that will access the remote J2EE1.4 application server which runs on another host computer?
I have developped a stateles senterprise java bean name converter and deloyed it in the j2ee1.4 application server on the host machine A. The converterbean provides the remote home interface and remote interface. At the same time I have developped the j2ee application client named convertappclient. When I access the conveter bean at host computer A through the script 'appclient.bat' as 'appclient -client convertappclient.jar', the client can access the bean sucessfully. Now I want to access the bean through the script 'appclient.bat' at host computer B,what files should I copy from host computer A to host computer B;and what the command line should be like? Thanks!
The following are the code of the enterprise java bean and it's home interface .
The client code is also provided.
The enterprise java bean:
package converter;
import java.rmi.RemoteException;
import javax.ejb.SessionBean;
import javax.ejb.SessionContext;
import java.math.*;
public class ConverterBean implements SessionBean {
BigDecimal yenRate = new BigDecimal("121.6000");
BigDecimal euroRate = new BigDecimal("0.0077");
public ConverterBean() {
public BigDecimal dollarToYen(BigDecimal dollars) {
BigDecimal result = dollars.multiply(yenRate);
return result.setScale(2, BigDecimal.ROUND_UP);
public BigDecimal yenToEuro(BigDecimal yen) {
BigDecimal result = yen.multiply(euroRate);
return result.setScale(2, BigDecimal.ROUND_UP);
public void ejbCreate() {
public void ejbRemove() {
public void ejbActivate() {
public void ejbPassivate() {
public void setSessionContext(SessionContext sc) {
The bean's remote home interface :
package converter;
import java.rmi.RemoteException;
import javax.ejb.CreateException;
import javax.ejb.EJBHome;
public interface ConverterHome extends EJBHome {
Converter create() throws RemoteException, CreateException;
The bean's remote interface:
package converter;
import javax.ejb.EJBObject;
import java.rmi.RemoteException;
import java.math.*;
public interface Converter extends EJBObject {
public BigDecimal dollarToYen(BigDecimal dollars) throws RemoteException;
public BigDecimal yenToEuro(BigDecimal yen) throws RemoteException;
The j2ee application client:
import converter.Converter;
import converter.ConverterHome;
import javax.naming.Context;
import javax.naming.InitialContext;
import javax.rmi.PortableRemoteObject;
import java.math.BigDecimal;
public class ConverterClient {
public static void main(String[] args) {
try {
Context initial = new InitialContext();
System.setProperty("java.naming.factory.initial","org.jnp.interfaces.NamingContextFactory");
System.setProperty("java.naming.provider.url","jnp://10.144.97.250:3700");
Context myEnv = (Context) initial.lookup("java:comp/env");
Object objref = myEnv.lookup("ejb/SimpleConverter");
ConverterHome home =
(ConverterHome) PortableRemoteObject.narrow(objref,
ConverterHome.class);
Converter currencyConverter = home.create();
BigDecimal param = new BigDecimal("100.00");
BigDecimal amount = currencyConverter.dollarToYen(param);
System.out.println(amount);
amount = currencyConverter.yenToEuro(param);
System.out.println(amount);
System.exit(0);
} catch (Exception ex) {
System.err.println("Caught an unexpected exception!");
ex.printStackTrace();
}Surprisingly I find an upsurge in the number of posts with this same problem. I recently found a post which gave a nice link for this. Follow the steps and it should help:
http://docs.sun.com/source/819-0079/dgacc.html#wp1022105 -
I don't find my app in itunes how can i regain the app??
i don't find my app in itunes how can i regain the app??
As long as it's still available in the app store, and you use the same iTunes account as you originally used to buy/download it, then you should be able to re-download it for free : http://support.apple.com/kb/HT2519
Maybe you are looking for
-
Acrobat DC - scanning problem on Mac
Scanning using Acrobat DC Pro Trial on an iMac running Yosemite. No problems at all scanning with Acrobat XI. Acrobat DC recognises my scanner (a network attached Brother MFC9840CDW). Sometimes DC will scan a page, but mostly it hangs having not quit
-
USB PC to PC: help needed to use it.
I am having difficulties using the USB PC to PC file transfer between two computers. I installed USB PC to PC, latest version, on both computers and connected them via USB cable. I also made sure that the folders are set as "shared", and accessable b
-
After replacing my battery with a long life battery and powering up the phone, I was directed to plug into iTunes where a download began and then stopped, returning me to the screen instructing me to plug into iTunes again. I cannot get past this po
-
Los parlantes de mi macbookpro 15'' suenan mal
Hola buenas , bueno tengo un problema con los parlantes de mi macbook no se porque suenan mal , chicharrean, alguien me podria ayudar.. respecto a este tema ya que primera vez que me pasa con un macbook pro y que cosa tendria que hacer agradeceria mu
-
I have a jsp page which gets the information regarding the systems details /urls which where browsed into the page which updates the processes which are currently in . I am in a problem I dont know how to autoload the JSP page by automatically starti