1 template =different results

I also posted this problem in Dreamweaver extensions as I don't know it is a DW C4 bug or a problem with Project 7 Pop magic menu 2
Here is the whole information.
For my menu bar I use the mentioned P7 software.
For the website I use only 1 template
Now I noticed that for only 4 pages the menubar is split into rows while for all the other pages everything is ok as per template.
I recreated those 4 pages by using the template. I only copied and pasted the contense from the old pages onto the new ones.
I gave them a new name.
I uploaded those 4 pages without linking them in the menu bar = Result = ok.
But but but but if I now make a link in the menu bar to these 4 pages and upload the changes again = the same error appears and only for these 4 pages. I never had this problem before. And these are the oldest pages so they have not changed at all.
Here are the links of the pages with the error.
http://www.lotolux.com/lbiography.html
http://www.lotolux.com/actingcareer.html
http://www.lotolux.com/burbank08concert.html
http://www.lotolux.com/london08concert.html
And here are the new pages (same name but with 2 at the end).
without linking in the menu bar. You will notice that here the menubar is as on all other pages.
But once I link them the error is back there.
http://www.lotolux.com/london08concert2.html
http://www.lotolux.com/burbank08concert2.html
http://www.lotolux.com/actingcareer2.html
http://www.lotolux.com/biography2.html
I don't know if this a bug in DW C4 or with the Extension P7 PMM2. Uploaded without links in the menu bar gives a perfect result
But once linked the error pops up again, and only for those 4 pages.
Many thanks for helping me out
Kind regards
Martine

Hi Murray,
I got info from P7. The text in a menu box turns into 'bold' when selected. That makes the last textbox jump. It can be solved by reducing the px or by removing the 'bold'.
However,.................. I just spotted something and ..........found the solution. I simply unticked 'Auto Center'. Problem solved.
Oufffffff!
Martine

Similar Messages

Variance Scaling in Query and Web Template Showing Different Results

Hi experts,
I have the following problem - variance scaling in my query and web template are showing different results.
My variance in column is set as follows:
Formula: NODIM(A % B)
Scaling Factor: 1
I have a structure in row that uses Scaling Factor of 1,000.
Let say the value of Column A is 120 and Column B is 100.
When I execute the query, it will show 0.02
However, when I execute the web template it will show the correct scaling i.e. 20.
May I know what can I do to correct above scaling error?
Thank you!

You can not remove the scalling factor, but once you check the checkbox below the dropdown menu, the scalling factor will go away.
I checked at my end and when I set the scalling fact as 1, I was getting 9.9% while I was expecting 9900%. When I removed the scalling factor I started getting 9900%.
I would let you know if I came across anything else.
What about the unit of Column A and B. Are they same or different?
- Danny
Edited by: Danny Matt on Jun 22, 2009 1:54 PM

Different results on PC and Mac

Hello,
I am a new user of iWeb 09 and I created my first blog.
But when I publish my site, I got different results when viewing from a Mac or a PC.
I don't understand why et would appreciate some help to fix that.
My site is under the following address : www.isadezabo.com
Thank you for your help.
Jack

I looked at your site with Virtualbox, Win XP and MSIE 8.
The *just try it* page does not display very well. Or rather, barely at all.
From a design perspective I doubt that a blog is a good choice to present your merchandise.
I'd rather create dedicated pages based on style, design, topic, etc.
Or re-design your blog pages without putting to much content in each blog entry. And then check it on a PC.
Note that browsers each have there way of displaying webpages. And MSIE is not very good at that.
To promote my merchandise, I present you some iWeb pages made for the iPad, but which really look good on both Mac and PC Desktops.
It attempts to show that even within (intentionally) limited space you can display whatever you want.
http://dailynews.webege.com/roodhout/
http://dailynews.webege.com/ipad/
http://dailynews.webege.com/cultureclub/
I haven't much creative abilities, so I used iWork Pages templates. See if it serves as inspiration.

Oracle function and query return different results

Hi, I am using oracle 10g database.
Function is :
create or replace FUNCTION FUNC_FAAL(myCode number,firstDate date
*, secondDate date)*
RETURN INTEGER as
rtr integer;
BEGIN
select count() into rtr*
from myschema.my_table tbl where tbl.myDateColumn between firstDate and
secondDate and tbl.kkct is null and tbl.myNumberColumn = myCode ;
return (rtr);
END FUNC_FAAL;
This function returns 117177 as result.
But if I run same query in the function seperately ;
select count()*
from myschema.my_table tbl
where tbl.myDateColumn between firstDate and secondDate
and tbl.kkct is null and tbl.myNumberColumn = myCode ;
I get different result 11344 (which is the right one).
Table and function are in the same schema.
What can be the problem ?
Thanks.

1. i think ur parameter name and Column names are same Firstdate and seconddate try to choose different name
2. try using Trunc function around your dates
where trunc(tbl.myDateColumn) between trunc(firstDate) and trunc(secondDate)then compare the result....sometimes time elements comes into play.
Baig
[My Oracle Blog|http://baigsorcl.blogspot.com/]

How to Create a new column from two different result sets

How to Create a new column from two different result sets, both the result set uses the different date dimensions.

i got solutions for this is apply filters in column formula it self, based on the requirement.

Filter expression producing different results after upgrade to 11.1.1.7

Hello,
We recently did an upgrade and noticed that on a number of reports where we're using the FILTER expression that the numbers are very inflated. Where we are not using the FILTER expression the numbers are as expected. In the example below we ran the 'Bookings' report in 10g and came up with one number and ran the same report in 11g (11.1.1.7.0) after the upgrade and got two different results. The data source is the same database for each envrionment. Also, in running the physical SQL generated by the 10g and 11g version of the report we get different the inflated numbers from the 11g SQL. Any ideas on what might be happening or causing the issue?
10g report: 2016-Q3......Bookings..........72,017
11g report: 2016-Q3......Bookings..........239,659
This is the simple FILTER expression that is being used in the column formula on the report itself for this particular scenario which produces different results in 10g and 11g.
FILTER("Fact - Opportunities"."Won Opportunity Amount" USING ("Opportunity Attributes"."Business Type" = 'New Business'))
-------------- Physical SQL created by 10g report -------- results as expected --------------------------------------------
WITH
SAWITH0 AS (select sum(case when T33142.OPPORTUNITY_STATUS = 'Won-closed' then T33231.USD_LINE_AMOUNT else 0 end ) as c1,
T28761.QUARTER_YEAR_NAME as c2,
T28761.QUARTER_RANK as c3
from
XXFI.XXFI_GL_FISCAL_MONTHS_V T28761 /* Dim_Periods */ ,
XXFI.XXFI_OSM_OPPTY_HEADER_ACCUM T33142 /* Fact_Opportunity_Headers(CloseDate) */ ,
XXFI.XXFI_OSM_OPPTY_LINE_ACCUM T33231 /* Fact_Opportunity_Lines(CloseDate) */
where ( T28761.PERIOD_NAME = T33142.CLOSE_PERIOD_NAME and T28761.QUARTER_YEAR_NAME = '2012-Q3' and T33142.LEAD_ID = T33231.LEAD_ID and T33231.LINES_BUSINESS_TYPE = 'New Business' and T33142.OPPORTUNITY_STATUS <> 'Duplicate' )
group by T28761.QUARTER_YEAR_NAME, T28761.QUARTER_RANK)
select distinct SAWITH0.c2 as c1,
'Bookings10g' as c2,
SAWITH0.c1 as c3,
SAWITH0.c3 as c5,
SAWITH0.c1 as c7
from
SAWITH0
order by c1, c5
-------------- Physical SQL created by the same report as above but in 11g (11.1.1.7.0) -------- results much higher --------------------------------------------
WITH
SAWITH0 AS (select sum(case when T33142.OPPORTUNITY_STATUS = 'Won-closed' then T33142.TOTAL_OPPORTUNITY_AMOUNT_USD else 0 end ) as c1,
T28761.QUARTER_YEAR_NAME as c2,
T28761.QUARTER_RANK as c3
from
XXFI.XXFI_GL_FISCAL_MONTHS_V T28761 /* Dim_Periods */ ,
XXFI.XXFI_OSM_OPPTY_HEADER_ACCUM T33142 /* Fact_Opportunity_Headers(CloseDate) */ ,
XXFI.XXFI_OSM_OPPTY_LINE_ACCUM T33231 /* Fact_Opportunity_Lines(CloseDate) */
where ( T28761.PERIOD_NAME = T33142.CLOSE_PERIOD_NAME and T28761.QUARTER_YEAR_NAME = '2012-Q3' and T33142.LEAD_ID = T33231.LEAD_ID and T33231.LINES_BUSINESS_TYPE = 'New Business' and T33142.OPPORTUNITY_STATUS <> 'Duplicate' )
group by T28761.QUARTER_YEAR_NAME, T28761.QUARTER_RANK),
SAWITH1 AS (select distinct 0 as c1,
D1.c2 as c2,
'Bookings2' as c3,
D1.c3 as c4,
D1.c1 as c5
from
SAWITH0 D1),
SAWITH2 AS (select D1.c1 as c1,
D1.c2 as c2,
D1.c3 as c3,
D1.c4 as c4,
D1.c5 as c5,
sum(D1.c5) as c6
from
SAWITH1 D1
group by D1.c1, D1.c2, D1.c3, D1.c4, D1.c5)
select D1.c1 as c1, D1.c2 as c2, D1.c3 as c3, D1.c4 as c4, D1.c5 as c5, D1.c6 as c6 from ( select D1.c1 as c1,
D1.c2 as c2,
D1.c3 as c3,
D1.c4 as c4,
D1.c5 as c5,
sum(D1.c6) over () as c6
from
SAWITH2 D1
order by c1, c4, c3 ) D1 where rownum <= 2000001
Thank you,
Mike
Edited by: Mike Jelen on Jun 7, 2013 2:05 PM

Thank you for the info. They are definitely different values since ones on the header and the other is on the lines. As the "Won Opportunity" logical column is mapped to multiple LTS it appears the OBI 11 uses a different alogorthim to determine the most efficient table to use in the query generation vs 10g. I'll need to spend some time researching the impact to adding a 'sort' to the LTS. I'm hoping that there's a way to get OBI to use similar logic relative to 10g in how it generated the table priority.
Thx again,
Mike

PreparedStatement & regular Statement - different results for same select

I was wondering if someone could either
i) try this out for me to confirm my results or
ii) let me know what I am doing wrong
I'm one of the developers on a product and am currently investigating localization for the Thai language...just checking to see that Java and Swing have no problems with it. The only bewildering thing which has happened is noticing that some values which are fetched from the database display in Thai perfectly and other values display as a garble. Sometimes the exact same column is displayed correctly in one part of the program but is not OK in another part. I think I've figured out what it going on and suspect a bug in Oracle's JDBC:
Some selects were configured as PreparedStatements and those return the Thai properly. The more common case however was for programmers to use a simple Statement object for their select and it is in those that the multi-byte strings don't get returned properly.
The following code shows the problem that I am experiencing. I am basically executing the exact same select in 2 different ways and they are both giving different results as long as the column being queried contains a Thai character. If someone could grab and check it out and let me know if they see the same thing, I'd appreciate it. Just change the column/table name and the username/password/databaseIP to get it to run.
<code>
import java.sql.*;
public class SelectTest {
public static void main(String[] args) {
try {
DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
Connection conn = DriverManager.getConnection( "jdbc:oracle:thin:@10.4.31.168:1524:ora8",
"dms_girouard",
"girouard");
String sqlCommand = "select C0620_Title from T0620_SwSheet";
Statement statement = conn.createStatement(ResultSet.TYPE_SCROLL_INSENSITIVE,
ResultSet.CONCUR_READ_ONLY);
ResultSet resultSet1 = statement.executeQuery(sqlCommand);
while (resultSet1.next()) {
if (resultSet1.getString("C0620_Title") != null) {
System.out.println("resultSet1 Title = " + resultSet1.getString("C0620_Title"));
PreparedStatement preparedStatement = conn.prepareStatement(sqlCommand);
ResultSet resultSet2 = preparedStatement.executeQuery();
while (resultSet2.next()) {
if (resultSet2.getString("C0620_Title") != null) {
System.out.println("resultSet2 Title = " + resultSet2.getString("C0620_Title"));
catch (Exception e) {
System.out.println(e.getMessage());
</code>

Hi Peter,
Are you using NCHAR column for Thai , or is your database character set set for Thai.
If you are using a NCHAR column for holding Thai data, then you have to use the
OraclePreparedStatement.setFormOfUse(...) before executing the select.
Regards
Elango. Hi Elangovan,
Thank you for answering.
The datatype on the column is VARCHAR2.
I did my initial tests without doing anything special to make sure the database is localized for Thai, and I was happy to find that almost everything still worked fine - I was able to save and retrieve Thai strings to the database almost perfectly.
The only problem I discovered was the difference between Statement and PreparedStatement selects on a column containing Thai. Colleagues of mine have said they see the same thing when testing on a Oracle database which has been configured specifically for the Thai customer.
I read somewhere that the current JDBC drivers are using an older version of the Unicode standard than the most current version of the Java SDK and that it was causing some problems with Korean. I'm wondering if maybe it's the same problem with Thai.

Mobile account creation has different result...

Created managed preference group:
- Finder: Show connected servers on Desktop
- Mobility: Set to create Mobile account, synching off, HomeFolder on startup volume.
- Login: Maps three SMB paths to Windows Server folders
- Active Directory: UNC path set in user's Active Directory profile to Home Folder on Windows Server
There are two different conditions that give different results:
(1) User logs on to a particular Mac once (using AD network account), prior to applying managed preferences. User is not member of preference group. Mac creates full set of User Account folders in user's home. Then user's name is applied to preference group, and user logs on.
(2) User's name applied to preference group, prior to logging on to a particular Mac. User logs in using AD network account.
Results: With condition (1), User gets a full set of typical folders in local home folder, UNC network home folder is mapped to dock - the two Home folders (local and network) are kept separated, all works as anticipated.
With condition (2), user does not consistently get full set of folders in local home folder, UNC network home folder is mapped to dock - and local "Library/Preferences" and "Downloads" is copied into network home. Occasionally, user's AD account gets locked out due to too many failures while attempting to access folders.
I would greatly appreciate anyone who can lead me to understand this.
Thank you...David

The usual approach with Open Directory is to either use Workgroup Manager to define a managed login preference for a computer group to define that those member computers should cause the use of mobile accounts on those computers, or to do the same thing via Profile Manager.
Note: If you are using Mavericks you must use Profile Manager as it does not support this via Workgroup Manager managed preferences.
This will not require users to need admin authorisation.

Same query giving different results

Hi
I m surprised to see the behaviour of oracle. I have two different sessions for same scheema on same server. In both sessions same query returns different results. The query involves some calculations like sum and divisions on number field.
I have imported this data from another server using export / import utility available with 9i server. Before export every thing was going fine. Is there some problem with this utility.
I m using Developer 6i as the front end for my client server application. The behaviour of my application is very surprizing as once it shows the correct data and if I close the screen and reopen, it shows wrong data.
I m really stucked with the abnormal behaviour. Please tell me the possiblities and corrective action for these conditions.
Regards
Asad.

There is nothing uncommitted in both the sessions. But still different results are returned.
I m sending u the exact query and result returned in both sessions.
Session 1:
SQL> rollback;
Rollback complete.
SQL> SELECT CC.CREDIT_HRS,GP.GRADE_PTS
2 FROM GRADE G, COURSE_CODE CC, GRADE_POLICY GP
3 WHERE G.COURSE_CDE=CC.COURSE_CDE
4 AND G.SELECTION_ID=45 AND G.GRADE_TYP=GP.GRADE_TYP
5 AND G.TERM_PROG_ID=17 AND GP.TERM_ID=14
6 /
CREDIT_HRS GRADE_PTS
3 4
4 3.33
4 3.33
3 4
3 4
3 4
3 4
7 rows selected.
SQL>
SESSION 2:
SQL> rollback;
Rollback complete.
SQL> SELECT CC.CREDIT_HRS,GP.GRADE_PTS
2 FROM GRADE G, COURSE_CODE CC, GRADE_POLICY GP
3 WHERE G.COURSE_CDE=CC.COURSE_CDE
4 AND G.SELECTION_ID=45 AND G.GRADE_TYP=GP.GRADE_TYP
5 AND G.TERM_PROG_ID=17 AND GP.TERM_ID=14
6 /
CREDIT_HRS GRADE_PTS
3 4
4 3.33
3 4
3 4
3 4
3 4
6 rows selected.
SQL>
U can see in session 1, seven rows are returned while in session 2 six rows are returned. I have issued a rollback before query to be sure that data in both sessions is same.

SQL Query produces different results when inserting into a table

I have an SQL query which produces different results when run as a simple query to when it is run as an INSERT INTO table SELECT ...
The query is:
SELECT   mhldr.account_number
,        NVL(MAX(DECODE(ap.party_sysid, mhldr.party_sysid,ap.empcat_code,NULL)),'UNKNWN') main_borrower_status
,        COUNT(1) num_apps
FROM     app_parties ap
SELECT   accsta.account_number
,        actply.party_sysid
,        RANK() OVER (PARTITION BY actply.table_sysid, actply.loanac_latype_code ORDER BY start_date, SYSID) ranking
FROM     activity_players actply
,        account_status accsta
WHERE    1 = 1
AND      actply.table_id (+) = 'ACCGRP'
AND      actply.acttyp_code (+) = 'MHLDRM'
AND      NVL(actply.loanac_latype_code (+),TO_NUMBER(SUBSTR(accsta.account_number,9,2))) = TO_NUMBER(SUBSTR(accsta.account_number,9,2))
AND      actply.table_sysid (+) = TO_NUMBER(SUBSTR(accsta.account_number,1,8))
) mhldr
WHERE    1 = 1
AND      ap.lenapp_account_number (+) = TO_NUMBER(SUBSTR(mhldr.account_number,1,8))
GROUP BY mhldr.account_number;      The INSERT INTO code:
TRUNCATE TABLE applicant_summary;
INSERT /*+ APPEND */
INTO     applicant_summary
( account_number
, main_borrower_status
, num_apps
SELECT   mhldr.account_number
,        NVL(MAX(DECODE(ap.party_sysid, mhldr.party_sysid,ap.empcat_code,NULL)),'UNKNWN') main_borrower_status
,        COUNT(1) num_apps
FROM     app_parties ap
SELECT   accsta.account_number
,        actply.party_sysid
,        RANK() OVER (PARTITION BY actply.table_sysid, actply.loanac_latype_code ORDER BY start_date, SYSID) ranking
FROM     activity_players actply
,        account_status accsta
WHERE    1 = 1
AND      actply.table_id (+) = 'ACCGRP'
AND      actply.acttyp_code (+) = 'MHLDRM'
AND      NVL(actply.loanac_latype_code (+),TO_NUMBER(SUBSTR(accsta.account_number,9,2))) = TO_NUMBER(SUBSTR(accsta.account_number,9,2))
AND      actply.table_sysid (+) = TO_NUMBER(SUBSTR(accsta.account_number,1,8))
) mhldr
WHERE    1 = 1
AND      ap.lenapp_account_number (+) = TO_NUMBER(SUBSTR(mhldr.account_number,1,8))
GROUP BY mhldr.account_number;      When run as a query, this code consistently returns 2 for the num_apps field (for a certain group of accounts), but when run as an INSERT INTO command, the num_apps field is logged as 1. I have secured the tables used within the query to ensure that nothing is changing the data in the underlying tables.
If I run the query as a cursor for loop with an insert into the applicant_summary table within the loop, I get the same results in the table as I get when I run as a stand alone query.
I would appreciate any suggestions for what could be causing this odd behaviour.
Cheers,
Steve
Oracle database details:
Oracle Database 10g Release 10.2.0.2.0 - Production
PL/SQL Release 10.2.0.2.0 - Production
CORE 10.2.0.2.0 Production
TNS for 32-bit Windows: Version 10.2.0.2.0 - Production
NLSRTL Version 10.2.0.2.0 - Production
Edited by: stevensutcliffe on Oct 10, 2008 5:26 AM
Edited by: stevensutcliffe on Oct 10, 2008 5:27 AM

stevensutcliffe wrote:
Yes, using COUNT(*) gives the same result as COUNT(1).
I have found another example of this kind of behaviour:
Running the following INSERT statements produce different values for the total_amount_invested and num_records fields. It appears that adding the additional aggregation (MAX(amount_invested)) is causing problems with the other aggregated values.
Again, I have ensured that the source data and destination tables are not being accessed / changed by any other processes or users. Is this potentially a bug in Oracle?Just as a side note, these are not INSERT statements but CTAS statements.
The only non-bug explanation for this behaviour would be a potential query rewrite happening only under particular circumstances (but not always) in the lower integrity modes "trusted" or "stale_tolerated". So if you're not aware of any corresponding materialized views, your QUERY_REWRITE_INTEGRITY parameter is set to the default of "enforced" and your explain plan doesn't show any "MAT_VIEW REWRITE ACCESS" lines, I would consider this as a bug.
Since you're running on 10.2.0.2 it's not unlikely that you hit one of the various "wrong result" bugs that exist(ed) in Oracle. I'm aware of a particular one I've hit in 10.2.0.2 when performing a parallel NESTED LOOP ANTI operation which returned wrong results, but only in parallel execution. Serial execution was showing the correct results.
If you're performing parallel ddl/dml/query operations, try to do the same in serial execution to check if it is related to the parallel feature.
You could also test if omitting the "APPEND" hint changes anything but still these are just workarounds for a buggy behaviour.
I suggest to consider installing the latest patch set 10.2.0.4 but this requires thorough testing because there were (more or less) subtle changes/bugs introduced with [10.2.0.3|http://oracle-randolf.blogspot.com/2008/02/nasty-bug-introduced-with-patch-set.html] and [10.2.0.4|http://oracle-randolf.blogspot.com/2008/04/overview-of-new-and-changed-features-in.html].
You could also open a SR with Oracle and clarify if there is already a one-off patch available for your 10.2.0.2 platform release. If not it's quite unlikely that you are going to get a backport for 10.2.0.2.
Regards,
Randolf
Oracle related stuff blog:
http://oracle-randolf.blogspot.com/
SQLTools++ for Oracle (Open source Oracle GUI for Windows):
http://www.sqltools-plusplus.org:7676/
http://sourceforge.net/projects/sqlt-pp/

"select count(*)" and "select single *" returns different result

Good day!
product version SAP ECC 6.0
oracle10
data transfers from external oracle db into customer tables using direct oracle db link
sometimes I get case with different results from 2 statements
*mytable has 10 rows
*1st statement
data: cnt type I value 0.
select count( * ) into cnt from mytable WHERE myfield_0 = 123 and myfield_1 = '123'.
*cnt returns 10 - correct
*2nd statement
select single * from mytable WHERE myfield_0 = 123 and myfield_1 = '123'.
*sy-dbcnt returns 0
*sy-subrc returns 4 - incorrect, 10 rows are "invisible"
but
1. se16 shows correct row number
2. I update just one row from "invisible" rows using se16 and 2nd statement returns correct result after that
can not understand why
thank you in advance.

Thank you, Vishal
but,
general problem is that
1. both statements have the same WHERE conditions
2. 1st return resultset with data (sy-dbcnt=10), 2nd return empty dataset, but must return 1 in sy-dbcnt
Yes, different meaning, you are right, but must 2nd must return 1, because of "select single *" construction, not 0.
Dataset to process is the same, WHERE conditions are equal...
I think the problem is that how ABAP interperets select count(*) and "select single *".
Maybe "select count (*)" scans only PK from index page(s)? and "select single *" scans data pages? and something is wrong with that?
I'm new in SAP and didn't find any SAP tool to trace dump of data and indexes pages with Native SQL.
se16 shows all records.
And why after simple manual update of just one record using se16 "select single *" returns 1?
I've just marked one row to update, didn't change any data, then pressed "save".

ODS and Infocube showing different results

Hi,
I loaded same data to Infocube and ODS but they are both showing different result in BEX.
ODS
ODS report is showing summarised values e.g
vendor               order value                   invoice value        date
00001                    20                               20                 01.01.2007
Infocube
result is showing not summarised values
vendor               order value                   invoice value        date
00001                    20                                 0                      0
                              0                                20                  01.01.2007
I would like to make the infocube result same as the ODS because I am remodelling so that we start reporting from Infocube rather than ODS.
thanks

Hi,
this is the scenario
currently we are reporting from ODS object which fetch data from 3 ODSes. now I am asked to remodel so that we can report from infocube not ODS.
steps I have taken so far.
- created new infocube
- created 3 update rules ( same Update rules that gives the reporting ODS data).
my target is to make sure that the current ODS report is the same as the infocube report but so far the report is not consistent
I compared the data in the ODS and infocube and they are exactly the same but the report is showing differently

XSLT producing different results via debugger and xslt.Transform()

I'm producing the body of an email via an xsl. I've been having a problem with the html nested inside a <table> tag not displaying correctly. With a bit of help from the good folks over at the asp.net forums, I've tracked the problem down to getting
different results if I run the xsl via the debugger or via a compiled transform.
When I debug the xsl it produces
      <table border="1" cellpadding="4" cellspacing="0" style="..." id="tmsEmailTable">
        <tr>
          <th width="50%" align="center"><b>Issue</b></th>
          <th width="50%" align="center"><b>Resolution</b></th>
        </tr>
        <tr>
          <td>Missing Acknowledgement date</td>
          <td><p> Test test</p></td>
        </tr>
        <tr>
          <td>Missing Agent and/or Seller signature</td>
    </table>
And that's absolutely correct and displays perfectly if I save the result as an html file. But when I use xslt.Transform(..), where xslt is a compiled transform, it produces
<table border="1" cellpadding="4" cellspacing="0" style="..." id="tmsEmailTable">
            <tr><th width="50%" align="center"><b>Issue</b></th><th width="50%" align="center"><b>Resolution</b></th></tr>
            <tr>
                <td>
                    Missing Acknowledgement date
                </td>
                <td></td>
            </tr>
        </table>
    </p><p> Test test</p></td></tr><tr>
        <td>Missing Agent and/or Seller signature</td>
        <td>
    </table>
And to make it even more interesting, that extra </table> tag and the misplaced table data only occur on the first table row, but the table rows are generated by an xsl:for-each.
The relevant bit of the xsl is:
          <table border="1" cellpadding="4" cellspacing="0" style="..." id="tmsEmailTable">
            <tr>
              <th width="50%" align="center">
                <b>Issue</b>
              </th>
              <th width="50%" align="center">
                <b>Resolution</b>
              </th>
            </tr>
            <xsl:for-each select="emailbody/checklist/item">
              <xsl:if test="string-length(select='issue')>0">
                <tr>
                  <td>
                    <xsl:value-of select="issue" disable-output-escaping="yes" />
                  </td>
                  <td>
                    <xsl:value-of select="resolution" disable-output-escaping="yes" />
                  </td>
                </tr>
              </xsl:if>
             </xsl:for-each>
          </table>
The code that generates the compiled transform and the (incorrect) output is:
            Dim xslt As XslCompiledTransform = New XslCompiledTransform(True)
            'Dim xslt As XslTransform = New XslTransform
            xslt.Load(templatePath)
            Dim objStream As Stream = New MemoryStream(UTF8Encoding.UTF8.GetBytes(xmlData))
            Dim strbldrXML As StringBuilder = New StringBuilder()
            Dim objXmlReader As XmlReader = XmlReader.Create(objStream)
            Dim objXmlWriter As XmlWriter = XmlWriter.Create(strbldrXML)
            xslt.Transform(objXmlReader, objXmlWriter)
I've checked that templatePath is pointing to the right file, and the source file I'm debugging the xsl against was copied from the xmlData parameter, so I know the same stuff is getting fed into it.
I've been chasing this for days, and I'm about ready to quit and go get a job at a fast food joint. I'm not wonderful with xsl in general, or xsl in .NET in particular. Somebody PLEASE tell me I'm doing something stupid....
Rebecca M. Riordan

Thanks for the replay, Fred, but that wasn't the problem.
I still don't know what the problem was, but in putting together a sample for review, I cleaned up the code a little (I inherited this), and while it
appears to be functionally identical, it's working now. Since we're scheduled to go live on Friday, I'm gonna just take the win ;)
In the unlikely event that anybody's curious, the original, non-functional code, looked like this:
Public Function createEmailBody(ByVal templateType As String, ByVal xmlData As String) As String
            Dim templatePath, emailBody As String
            templatePath = Me.templatePath & "\" & templateType & ".xsl"
            Dim xpd As New XPathDocument(New StringReader(xmlData))
            Dim xslt As XslCompiledTransform = New XslCompiledTransform(False)
            xslt.Load(templatePath)
            Dim objStream As Stream = New MemoryStream(UTF8Encoding.UTF8.GetBytes(xmlData))
            Dim strbldrXML As StringBuilder = New StringBuilder()
            Dim objXmlReader As XmlReader = XmlReader.Create(objStream)
            Dim objXmlWriter As XmlWriter = XmlWriter.Create(strbldrXML)
            xslt.Transform(objXmlReader, objXmlWriter)
            emailBody = strbldrXML.ToString()
            Return emailBody
End Function
In cleaning it up, I wrote this:
Public Function createEmailBody(ByVal templateType As String, ByVal xmlData As String) As String
            Dim xslt As XslCompiledTransform = New XslCompiledTransform(False)
            Dim templatePath As String = Me.templatePath & templateType & ".xsl"
            xslt.Load(templatePath)
            Dim reader As XmlReader = XmlReader.Create(New MemoryStream(UTF8Encoding.UTF8.GetBytes(xmlData)))
            Dim outSB As StringBuilder = New StringBuilder()
            Dim writer As XmlWriter = XmlWriter.Create(outSB)
            xslt.Transform(reader, writer)
            Dim emailBody As String = outSB.ToString()
            Return emailBody
End Function
As I said, they look functionally identical to me, but obviously they're not, because the second one works....
Rebecca M. Riordan

Different result in IE and Netscape

Hi,
I am using JDeveloper 3.2 to create my JSP and BC4J. I deployed them into my web server, but I got different result in IE and Netscape. I amd using web bean method to create my JSP.
When I view my JSP from IE, everything looks as expected. But when I view them from Netscape, some pages did not display correctly.
1. For the JSTab, the Netscape displays different color(blue) in the help text area, but the IE display gray color.
2. If I have a table with many columns (e.g.25) to be displayed and my browser is too small to display them all, the Netscape displays JSRowSetBrowser incorrectly. The top right corner, and bottom right corner did not display at the last column side, instead it displaying in the middle of my JSRowSetBrowser. It also suppressed my one button in the same page. IE displays them all properly.
How do I fix this problem? Please help.
I am using webapp/cabo/images/cabo_styles.css as my style sheet.
Lisa
null

I'm not an expert on Netscape, but I would guess that you're problems are simply caused by the differences between IE and NS.
It is very difficult to write (functional) JS code that works perfectly between the two of them and I bet that JSTab isn't written in such a way.
You may want to try using your own tab object, we do this by creating a page for each tab and making the actual tabs be links to each page. This avoids the use of JavaScript.
Good Luck!!!

Different results in different boxes

Hello
I have a small swing application in Linux - Debian box. The application run correctly. However, when I run this application in a Suse box, there are some different results. For example, I have a button "Search" that search objects from database. When I click this button, a result is shown. It works OK in my Debian box. However, it doesnot work in Suse box.
As Suse box is a client's box, I cannot view the System.out.println message to debug
Something wrong with my application?. Please have some suggestions
Many thanks
shuhu

Who knows.
What do you mean "it does not work"? How does it not work? Does it crash? Does it run, but no data is displayed? Is data displayed, but the values are known to be incorrect? Is the data correct, but it causes your hat to turn into cheese?
If you can't test on the client's box, then you should try to set up a local test environment to duplicate the client's environment, and test there. If it doesn't break similar on the test environment, then you're just going to have to create some kind of trace/debug system that you can get the client to run. Perhaps provide a "debug" mode that produces a log or the like, then tell your client to run it in debug mode and send you the log.

1 template =different results

Similar Messages

Maybe you are looking for