1 yr old Macbook pro random shutdowns on or off power

I have a MacBook pro thats about 1 year old, Mac OS X 10.6.8, completely updated, 2.66 GHz Intel Core i7.
It is randomly shutting down for no apparent reason... it happens about once a day, sometimes on the power sometimes when it's not, the battery time doesn't act strange at all, the temperature seems to be fine when it happens as well, between 60-70c like always. The screen goes blank, doesn't respond to anything i do, all lights are off, and then I hold down the power button and it makes a pop noise. I then turn it on again and its fine, and gives me an error report. It doesn't seem to be associated with any application... happens when I have just chrome open, just firefox, entourage, or word, any combination of those...Any ideas? It is definitely worrying me, especially since my warranty is pretty much just at the end of it's rope.

Sounds like a power supply problem (not portable power supply), but I wouldn't want to bet on the specific issue. I realize that your MBP is not in warranty, but you might do well to visit your local Genius Bar to get their input.
This is an interesting problem; post here with the results.

Similar Messages

  • New Macbook Pro - Random Shutdowns

    I got a 15" MacBook Pro 2 months ago and today I started having lots of problems. The macbook will start and then after a few minutes, it will randomly shut down. After each shutdown I cannot start the computer again. Pressing the power button does nothing. After about 5 minutes of shutting down the computer will start again on its own and then shutdown again in a few minutes. And the cycle continues like that. This happens while the macbook is plugged in as well.
    I do not think it is a battery problem because I removed the battery and turned it on while it is plugged in and still it is the same problem. I don't think it is a software issue because the same problem happens when I boot in both Mac OSX and Windows XP. Anyone have this problem?

    Hi dennyhle,
    Boot up from the osX dvd holding down the 'c' key, wait for the language screen to come up, pick a language and then from a menu choose Disk Utility and check the permissions and the drive for errors.
    If the problem remains after that boot up from the osX dvd again but this time hold the 'd' key to start the hardware test, run an extensive one.
    Hope this helps.

  • Mid-2010 MacBook Pro random shutdown

    Hi all, hoping you can help me with my very annoying shutdown issue. Sometimes it will happen within minutes of boot and sometimes the MBP will run for several hours without issue before it happens.
    I've been able to replicate the shutdown across OSes (Snow Leopard, Lion, Mountain Lion). Initially I thought it might be bad memory but through swapping memory and running the AHT on a loop for several hours I've determined memory isn't the issue. I've reset the NVRAM, PRAM and SMC several times with no luck. Hard drive and battery is working properly and the AHT is finding no errors with the logic board. Pretty sure I've tried everything I can before bringing it in for service. And of course I'm just past the 3 year warranty date. Help!

    You have the MacBookPro6,2, the Edsel of Macs. It may be covered by this program:
    MacBook Pro (15-inch, Mid 2010): Intermittent black screen or loss of video
    Make a "Genius" appointment at an Apple Store to have the machine tested. The routine hardware diagnostics used by service providers may not detect the fault. There is a specific test for this issue.
    Print the first page of the panic report, and the support page linked above, and bring them with you.
    Note that the replacement program only applies within three years of purchase. If you wait beyond that date, Apple may refuse the service. In that case, you'll be quoted a price of about $300 (in the U.S.) for a depot repair.
    Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
    *An SSD doesn't need to be zeroed.
    You may be able to stop the panics by disabling automatic graphics switching in the Energy Saver preference pane, but that's not a solution. 
    Most likely, the logic board will be replaced. Sometimes the replacement part is also defective, so be prepared for that possibility.

  • MacBook Pro Random Shutdown. What's wrong? What can I do?

    I just got a Macbook Pro 15" i5 about a month ago, but something weird has been going on. A couple of days after use I was using my computer and closed it for a few hours. When I came back to it, and opened the lid, it was no longer on. I thought I may have shut it down and forgot, but then it happened a couple of times again. It hasn't happened in the past week, so I thought it may be okay now. But I've recently (last couple of days) been watching things on my laptop and it seems that when the laptop is jogged, the video seems to pause. I thought it might be something I'm doing, but I never had this problem with my old mac. I think I should go to the store to get it fixed, but I was wondering what the issue is and whether I can do anything to correct it. It seems to me that it's a hardware issue and the laptop is somewhat unstable, but I was wondering if anyone had any insight. Thanks for your help. =D
    Message was edited by: NintendoMad8

    Yeah, I was already planning too. But I was wondering if anyone can provide any insight before I do. Or if anyone else has experienced this issue. Plus, I was wondering...if I just go down there will they be able to do anything, or will they make me book an appointment with the Genius Bar?
    (Also, what is AASP?)
    Message was edited by: NintendoMad8

  • MacBook Pro Random Shutdowns

    Hi all,
    My MacBook Pro has just recently begun randomly shutting itself down. I'm not sure why, but I have gathered that it's a known issues. Here are the specs on my laptop:
    -2.4Ghz intel core 2 duo
    -4GB of RAM
    -500GB HD
    -Nvidia 8600M GT graphics
    I forgot exactly which model this is, but I've had it for a good two years now. The warranty ran out last January, and I had the logic board, disc drive, and screen all replaced by Apple right before it did. I am already on my second battery, and this one has lasted just over a year. These things suck. Here is the battery info:
    Battery Information:
     Model Information:
     Manufacturer:    SMP
     Device name:    ASMB012
     Pack Lot Code:    0002
     PCB Lot Code:    0000
     Firmware Version:    0110
     Hardware Revision:    0500
     Cell Revision:    0200
     Charge Information:
     Charge remaining (mAh):    1323
     Fully charged:    No
     Charging:    No
     Full charge capacity (mAh):    2435
     Health Information:
     Cycle count:    538
     Condition:    Replace Now
     Battery Installed:    Yes
     Amperage (mA):    -1995
     Voltage (mV):    11193
    It switches back and forth from "replace soon" to "replace now". I realize the cycle count is very high and it is past it's lifetime apparently.
    So, my two questions are: why is my computer randomly shutting down? I think it could be the battery or the logic board. And is there a recommended this-party battery that is better than the Apple ones? Not only are those $130, but they do not last long at all. Between the two, I'm hoping it's the battery.
    Thanks in advance!

    Unfortunately, many MacBook Pros of the Core 2 Duo generation instead of going to sleep properly when the battery voltage drops below a particular threshold just shut themselves off instead. It's always been unclear whether this is due to the battery misreporting its voltage or some other cause.
    As you've likely surmised, the only fix is to replace the battery, at which time your machine should properly go to sleep when the battery charge gets too low.
    Note that you do have to care for your battery as well; it will help it last longer but nothing will fix the fact that batteries will only last a certain number of cycles.
    Apple's suggestions on the topic can be read here.

  • Macbook pro random shutdown "are you sure you want to shut down?"

    Firstly, I'm asking this on behalf of my boyfriend who would ask himself if his computer were working!
    His MacBook Pro 2.2GHZ new since July07 has just now, when started up, started displaying the shutdown message "are you sure you want to shut down?" and then shutting down anyway. Without being asked or prompted.
    This has happened everytime it has been switched on after a couple of minutes it will just do it over again. It is fully charged.
    Absolutely no idea what to do other than to take it down to the Mac Store and get it looked at.
    If anyone has any help or advice it would be greatly appreciated,
    thanks in advance. Charlie

    Ok thought i had this fixed myself, i put it down to over heating as it was just acting normally for the last couple of hours but having just turned it off and started shutting everything down for the night it turned itself on!
    I think i solved this by shutting the laptop but this has never happened before. I really hope someone can help, I've googled the problem to no avail and this is pretty much my last hope.
    Thanks again
    Charlie

  • MacBook Pro Random Shutdown

    I bought a new MacBook Pro about a month ago and everything was working fine until last Friday when my MBP suddenly shut down. I thought it was because I was away from the computer for a while and it was on battery save mode, but when I tried to boot it up again, it shut down after about 10 minutes. I turned it on again and it lasted for another 15 minutes before it shut down again. I'm not really sure what I should do at this point - is this a common issue?

    Were you on battery power? AC? What's your remaining battery capacity?

  • MacBook Pro Random Shutdown with Error Code: 4SNS/1/40000000: TAOP

    Hi All,
    Hope you can help, I have a 1st gen, MBP which i've recently upgraded the HD to a 500gb. Has been working perfectly until today when it had a few instances of random shut downs and not being able to power up...
    Got this error code while checking the Hardware test, but not sure what it actually means : 4SNS/1/40000000: TAOP
    Anyone got any ideas?? The HD is fully compatible and has worked flawlessly since installation, but now wondering if it has something to do with that??!
    Hope someone can shed some light,
    Thanks!
    Darren

    I too have a MBP 15". After 3+ years of good operation, it's developed a sudden shutoff. It happens when the machine is hot. I can get it happen often if playing a web video in Safari.
    I've also run AHT and got error 4SNS/1/40000000: TCOP
    Troubleshooting:
    I used the widget iStat and the utility smcFanControl to monitor the CPU temperature and fan speeds. I found a direct correlation between CPU temperature spikes, fan speed, and shutdowns. My machine shutdown/failed immediately if the CPU spiked for 2 seconds above 120 Celcius - that's a hot spike. I think it's a safety shutdown.
    By using the smcFanControl, I could nearly eliminate the shutdown by forcing the CPU fans to run full speed (6,000 RPM). This way, I could keep the temperature between 68-100 Celsius. However, I could still create conditions using multiple web video playback in Safari & Firefox that could spike the temp above 120 C. I found that running fans at full speed were not enough. Something additional must be wrong regarding heat transfer or sensing. So, I'm guessing the thermal grease on the CPU heatsink is old/dry/cracked. Or, there is dust/link blocking the airflow. Or, there is a design flaw with the heatsink so that it is insufficient to cool or monitor the CPU temperature properly. Not sure yet.
    I see on other forums that there is a new heatsink design and part number. The design has better thermocouple placement. And, if replaced, it will have new thermal grease.
    My question is: How can I purchase a new replacement heatsink for my MBP? Anybody know part numbers or vendors?

  • The trackpad on my 4-year-old Macbook Pro barely works anymore. It moves around by itself sometimes, can't scroll, etc. Is there a way to fix this?

    The trackpad on my 4-year-old Macbook Pro is completely screwed up. It moves around by itself sometimes, can't scroll, randomly freezes etc. Is there a way to fix this??

    Portables and Magic Trackpad: Jumpy or erratic trackpad operation

  • Macbook Pro random shut down whilst using battery

    My Macbook Pro randomly shuts down whilst using battery power even though their is plenty of charge in the battery.
    Any ideas??

    does it do it when plugged in?
    Also it sounds that there's a power failure and causing it to shutdown, I would get it serviced asap, the battery connector might be faulty.

  • 5year old MacBook pro  laptop died. Living in Belguam, India.

    5year old MacBook pro died. Living in Belguam, India. Do I need a converter for amps and wattage if I get a newer MacBook pro laptop? Would it be due to a power surge ? The power will go out at random times almost daily. Wondering if I need to get a converter with my next purchase of a laptop?

    Can you define "Died"? Did the battery reach the end of its usable life, or did it run out of charge and you have no means of charging it? Also, 5 years is somewhat old for apple technology, so it probably just died since it's so old, not de to a power surge or power outage.

  • MacBook Pro Random Resets

    I've been having this problem recently where my macbook pro randomly resets every now and then. I've never been able to do it whilst in OSX, only in windows. So far its only happened whilst I'm playing games in Windows but even then only a few games that I own.
    It happens whilst I'm playing world in conflict, medieval 2 total war but not during oblivion, company of heroes or supreme commander. So I'm not really sure what could be wrong.

    I am having this problem too. Here are my preliminary thoughts on the problem. When I play Command and Conquer 3, the computer just shuts off. At first, I thought this had to do with the logic board. I had just gotten it replaced via AppleCare. So I read my console log and the computer shuts off ecause of "high mem tramps".
    Because of this, then i thought it was my ram modules being bad. (I have Apple supplied ram. 2 gigs matched pair.) So i took the ram modules out. ran them individually, switched them. Still random shutdowns.
    So then i tried to localize my problem with my external peripherals. I have a 250 gb lacie external hard drive triple interface as well as a 750 gb western digital mybook external hard drive pro edition.
    I think this is where the problem lies. i've localized my problem to my WD MyBook Pro Edition II 750 gb hard drive. When I have it connected to my computer, I can't run anything that requires any strain on my graphics card. However, when I disconnect it from the computer, I can run things completely fine.
    Having said this, I'm not sure if this is exactly my problem. If anyone else wants to weigh in on this discussion, PLEASE HELP!!!
    NOTE: My computer resets when i try to run the itunes visualizer. I also have the itunes music folder set to my mybook hard drive.

  • I have a 3 year old MacBook Pro with MAC OSX 10.6.8, iPhoto '09 version 8.1.2 and have downloaded two software programs: one is Aperture 3.2 and the other is Photoshop Elements 9 (which I got from a friend who didn't need it). I am totally happy with the

    I have a 3 year old MacBook Pro with MAC OSX 10.6.8, iPhoto ’09 version 8.1.2 and have downloaded two software programs: one is Aperture 3.2 and the other is Photoshop Elements 9 (which I got from a friend who didn’t need it).
    I am totally happy with the way iPhoto organizes my photos and how I can work with iMovie to create slide shows with music from iTunes, etc.
    I have been shooting mostly high resolution jpegs and I continue to learn more and more about photography, post processing etc. I realize that the small adjustments I can make in iPhoto are good, and are adequate most of the time. However, a have started to experiment with shooting RAW images and would like to go the next step, ie. post processing.I am totally technically challenged and need SIMPLE, INTUITIVE programs and am certainly NOT anywhere ready for Photoshop CS whatever!
    After having these programs sit on my computer, I decided to try to see if I could figure them out. When I opened Aperture, this is what first comes up.
    “Welcome to Aperture 3.2
    Your library needs to be upgraded to work with this version of Aperture. Once upgraded, you will not be able to use this library with previous versions of Aperture.
    Upgrading a library from previous versions of Aperture 3 generally takes a few minutes or less, though larger libraries will take longer. After that, Aperture 3.2 will upgrade your library's thumbnails, but you can use the application during that time.
    Tip: To open a different library, quit Aperture and hold the Option key down while starting Aperture
    Current Library Location:
    Jadzia (home)   -----Pictures------Aperture Library
                                                      QUIT             UPGRADE”
    I have heard horror stories  about moving your entire library to Aperture, ending up with 2 libraries, etc. etc. hence my previous reluctance in attempting Aperture. In addition, many of my photography friends are saying: Go with Lightroom 3.....you’ll love it!
    So here is my dilemma.  I don’t want to mess around with my iPhoto library. All I want to be able to do, is to isolate a few photos, export them to Aperture, Elements, and work on them there, then bring them back into iPhoto.
    Can I do this? Should I forget about Aperture and Elements and look at purchasing yet another program like Lightroom?

    Export those few photos via the File ➙ Export ➙ File Export menu option with Kind = Original to the Desktop.  Then import them into the Aperture library. That would keep one copy in your iPhoto library and another in your Aperture library to edit, etc.
    You can use Photoshop Elements 9 from within iPhoto as your editor of choice. However, if you edit a raw file in iPhoto with PSE9 the resulting edited version must be saved outside the iPhoto Library and imported back in as a new file.  For editing jpegs just do a Save (not a Save As) and it all will be kept within iPhoto. 
    Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
    1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
    2 - double click on the thumbnail in iPhoto to open it in Photoshop.  When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done. 
    3 - however, if you get the navigation window
    that indicates that  PS wants to save it as a PS formatted file.  You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
    This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
    NOTE: With Photoshop Elements  the Saving File preferences should be configured as shown:
    I also suggest the Maximize PSD File Compatabilty be set to Always.  In PSE’s General preference pane set the Color Picker to Apple as shown:
    Note:  to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
    OT

  • How do I transfer files from my old MacBook Pro to my New MacBook Pro?

    I am trying to transfer some files, not all, from my old MacBook Pro to my new MacBook Pro. I have tried to use Migration Assistant, but it doesn't let me choose what I want to transfer (only generic things like "users" and "files and folders"). I have tried to use Firewire. Now here is the funny thing. When I put my old mac in target mode it doesn't appear on my new mac anywhere. But, when I put my new mac in target mode, it pops right up on the dashboard and in finder. The problem is I have tried using my new mac as the target and just place the files into the icon, but the don't stay after I eject. I get a prompt that says downloading and when all files and apps are transferred I turn off my new mac then turn it back on and nothing. I've done search after search and repeated this process 3 times and nothing. Am I doing something wrong? Please help.

    Time Machine will not "overwrite". New back ups are added to what is there, without erasing.
    Connect the Time Machine back up, double click on the icon and navigate through its contents - the back ups are chronological, so you just select the date then go through the contents just like on any other drive. You can select any files you want and drag and drop on the new Mac's desktop (or anywhere else).

  • How to install windows 7 on Old Macbook Pro 15'inch 2.3 Core 2 Duo

    How to install windows 7 on Old Macbook Pro 15'inch 2.3 Core 2 Duo:
    I want to known how to install windows 7 on Old Macbook 15'inch 2.3 Core 2 Duo by using usb
    I try many time, but after restart bootcamp partition, apple show blinking folder error
    I think this firmware not support to install windows by usb
    NOTE:
    I Cannot install Apple New OSX Mountain Lion, Mavericks etc in this MAC
    If I cannot install windows 7 on this MAC, so tell me what I will do with this MAC  ? 

    I agree with the optical drive, mine acted strange, and i thought people were crazy and my drive was shot, but a simple cleaning disc worked miracles.
    But- are you trying to reboot with both the USB install and the DVD install both plugged in?  that would definitely cause confusion.
    Do this, reboot with NOTHING plugged in.  Once you hear the Mac chime, immediately press and hold option.
    You should only see the Mac HD, and Recovery Partition.
    THEN plug in your external DVD, and wait a min or two, you should see a disc icon appear next to the recovery partition that says something like windows.  If that doesnt appear after a min or two, unplug it and put the USB stick and do the same thing.  I had to do it this way on my mid 09 MBP.
    Let me know if this works to start the install.  If not we may have to start over with Bootcamp Assistant

Maybe you are looking for

  • This is a missing file? -- warning: libmtmalloc.so : open failed...

    hi guys, i see this message when i open a console in solaris 10: Ld.so1: utmp_update: warning: libmtmalloc.so : open failed No such files in secure directories anybody knows where is the problem exactly? what i should be do for to fix it? thanks,

  • Is there a way to enter a "Legend" on the iCal?

    Is there a way to enter a "legend" on the iCal?

  • Why do I keep getting error: Cannot read property 'FindTypeNodeFromPath' of null ??

    Hi guys, I'm using visual sap.ui.vbm.VBI. I'm just trying to visualize a train on a map: config.json file:    "SAPVB": {       "version": "2.0",       "Config": {          "Set": {             "P": [{                "name": "traceAllowed",           

  • Open Raw Images

    I am unable to download raw images from my Canon EOS 50D in Photoshop CS4.  I think I need to download version 5.7 of a plug-in, but I don't know whether to download Adobe DNG Converter 5.7 or Camera Raw 5.7 update.  Which one?

  • Role Upload - System Aliases not used

    We are having a strange occurance during role upload. In the migrated content area, iViews are being created in folders that refer to system aliases used (e.g. R3, BW, etc.).  However, the "System" property of each iView is set to the logical system