10.1.0.5 32bit - 10.2.0.4 64bit x86 upgrade on Windows

Can anyone think of a way of getting from 10.1.0.5 32bit to 10.2.0.4 64bit x86 without an intermediate step through 10.2.0.4 32bit?
My problem is hardware capacity and downtime ... I don't want to disturb my existing production 32bit environment for obvious reasons.
My target machine has 64 bit OS (Win2003) so I can't run 32bit 10.2.0.4 on that. The only 64bit 10.1.0.5 I can find is for Itanium only so I can't run that either.
If there were a 64bit x86 version of 10.1.0.5 I would move database to 64bit machine, upgrade to 64bit at 10.1.0.5 and then upgrade in place to 10.2.0.4. However I think I am stuck with introducing an additional 32 bit machine just to get from 10.1.0.5 to 10.2.0.4 in the 32bit world, and then move again to my target 64bit environment.
Is it really true that there is no 64bit 10.1.0.5 for x86 Windows? Any bright ideas for avoiding having to move the whole database twice?
Regards, Dave

There is one metalink note 403522.1 which talks about migrating from 32 bit to 64 bit on 10g but it is meant for 10gR2. So I am not very sure if this is applicable from 10gR1 as well.
If you have your 64 bit server ready, you could install 10.2.0.4 64 bit on that and try the steps from this note.

Similar Messages

Hey. I want to install windows 8 32bit on my mac pro (mid 2012). I upgraded the windows 7 I already had, but now I dont have drivers at all... I searched drivers for the windows 8 32 bit but couldn't find any... Any solutions guys?

Hey everyone,
I want to install windows 8 32bit on my mac pro (mid 2012). I upgraded the windows 7 I already had, but now I dont have drivers at all...
I searched drivers for the windows 8 32 bit but couldn't find any...
Any solutions guys?
Thanks a lot.
Sincerely,
Chiponn

There's been an update for OSX ML which addresses the issue for installing Windows 8 on bootcamp.
It's NOT recommended that you Upgrade.. However, the way to get the drivers is:
You'll need an external USB drive formatted as FAT for this.
1) In OSX, start the Bootcamp Assistant
2) Press Next
3) UNTICK 'Remove WIndows 7 or Later Version'
4) TICK Download the Latest Windows Support Software from Apple
5) Insert USB drive
6) Press CONTINUE
The drivers should download, and copy a WIndowsSupport folder onto the USB drive.
I did notice that Windows 8 still requires beta drivers for some aspects such as VGA (the Radio HD Card), which you can get on the AMD website.
Futhermore, why are you using Windows 8 "32" bit when you blatently have a powerful 64bit?
Anyway, hope this post helps ;-)

It only uses 32bit, and my computer needs 64bit.   Please help.

I am a non profit. I ordered Photo shop Elements12 for PC for my office. It is a download only. It doesn't dowload on my computer. It only uses 32bit, and my computer needs 64bit.   Please help. The Adobe photoshop elements 12 is useless to me. I can't seem to get anyone at Techsoup to help and trying to get Adobe to help is runaround. What should I do to get it to run on my computer. Please someone in the forum let me know how switch out the download for the correct one.

64-bit windows can run 32-bit applications just fine and always has. They are just limited to a small amount of memory.   If something isn’t working it’s likely another problem like an incomplete download or trying to install the Mac version on a PC or something like that.
You can try downloading and installing from the PSE12 link, here, to see if it works any better:
http://www.adobe.com/downloads/other-downloads.html
If you can’t get things to work, then please post a screenshot of the error and a description of what you’re trying to do that lead to the error.
Also the term “downloading” refers to transferring a file from a remote server, across the internet, to your local computer.   The term “install” means running the program that was downloaded on your local computer to put the working program on your computer that you can run.
It would be helpful to know if your saying that the actual transfer across the internet part isn’t working, or if that part seemed to work, but when you run that installer program you’re seeing an error.

32bit Oracle ODBC Driver on 64bit RHEL 5.9 system

I am using unixODBC as my driver manager and 32 bit Oracle Client/Driver on Linux RHEL 5.9 64bit OS. I cannot seem to get a successful test with isql with 32bit ODBC Driver, i get success with 64bit ODBC Driver.

It is possible to get 32bit drivers to work on 64bit OS as long as the application you're using is 32bit.
Did you make sure that your unxiODBC driver manager is 32bit, that you have specified the 32bit libraries (also the 32bit Oracle client) in your LD_LIBRARY_PATH and that you're also using the 32bit isql?
What's the error message you're getting?
- Klaus

When i try to download the new version of iTunes, I get an error message saying the download was for 32bit and I need the 64bit. How do i download 64bit?!?!

When i try to download the new version of iTunes, I get an error message saying the download was for 32bit and I need the 64bit. How do i download 64bit?!?!

Which I get. But clicking on that link you provided does not give you the option of choosing between 32 and 64 bit installers.
Yeah, that was certainly a 32-bit installer file being referred to in the other message, too. (The 64-bit installer file is called iTunes64Setup.exe.)
Just in case it's an issue with your normal browser not working properly with the system-detection equipment on the page (there's a javascript control that checks for operating system specifics, and is supposed to deliver the correct Mac or Windows installers), let's try a different web browser for the download. If you use Firefox instead of IE (or vice versa), do you get offered an iTunes64Setup.exe instead of an iTunesSetup.exe?

Connecting to HP LaserJet 5100 printer on Win7, 32bit PC from a Win7, 64bit PC

I'm having a heck a time trying to add a printer that is on another machine. The printer is an HP LaserJet5100 and is connected to a Win7, 32bit pc using a pcl6 driver. The PC I want to add this other printer to is a Win7, 64bit. I went to HP Drivers and downloaded a HP LaserJet 5100 pcl6 driver for Win7, 64bit, and ran it, using traditional mode, on the PC that I'm trying to install a printer to. I chose "Add a network Printer..." and then pick the printer that I want to connect to. I get a Windows Printer Installation pop up that says "Checking for Windows Update. This might take a while..." and then get another popup that says "No driver found". I then get another pop up to locate the driver. Browsing to the driver files that I just download, I find eleven files of the .inf file type, but none of them are the right file. Any help would be greatly appreciated.

Hello Cinci-Hal,
Welcome back to the HP Forums.
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

How to install 32bit Premiere Element 10 on 64bit Windows7?

Premiere Elements 10 comes with 32bit and 64bit programs. The 2 versions each use different codecs. My camera manufacturer only supplies 32bit codecs, so the 64bit Premiere Elements 10 program cannot work with my camera's video files. The 32bit program works with the 32bit codecs that came with my camera, but the 32bit Adobe Premiere Elements 10 installer will not permit installation on a 64bit Windows7 (the error message directs the 64bit Premiere Elements 10 program be installed instead).
Have repeatedly contacted Adobe. They alternately tell me to install the 32 bit program, but haven't offered any instructions as to how to get the installer to run on a 64bit Windows7 OS. 64bit Windows7 should run any 32bit or 64bit app, so I'm hoping someone can provide insight (or hopefully instructions) on how to perform 32bit install.
Note, already have tried Windows compatibility mode for forcing installation. This gets past the installer restriction for 64bit OS, but installer still fails.

Bill,
Appreciate your comments. 32bit codecs from manufacturer install on 64bit Windows7 and support any 32bit app. That includes 32bit windows media player and camera's manufacturer specific video edit program. But I differ that 64bit apps can use 32bit codecs. 32bit Adobe Premiere Elements 10 works with manufacturer's 32bit codecs when installed to a 32bit Windows (which unfortunately is not my current workstation which is 64bit Windows7).
One of my camera's is Creative Vado HD, and it is my impression that Creative does not feel compelled to supply 64bit codecs since they supply their own video editor 32bit app. Of course, I cannot combine clips from multiple cameras on a manufacturer specific one-camera edit app.
Adobe Premiere Elements 10 explicitly names the Creative Vado HD as a supported camera on Adobe's website ... but apparently not the 64bit version of Premiere Elements 10. Have tried 3rd party 64bit codecs for H.264/MS-ADPCM which are at best partially functional with the 64bit Adobe Premiere Elements 10 app (they are generic and not camera specific).
The other camera is a Canon Vixia HG20 and is fully functional with either 32bit or 64bit Adobe Premiere Elements 10.
2 yrs ago I actually tested to insure Adobe Premiere Elements supported both cameras, but that was when I ran a 32bit workstation and Adobe Premiere Elements was only supplied as a 32bit app (ver9 trial I think). I should have re-verified with Premiere Elements 10 before making the purchase commitment. I hadn't anticipated that PE10 had gone 64bit and wouldn't support legacy 32bit install.
John,
Yes, I've verified Adobe Premiere Elements 10 32bit version works with both cameras. I installed to my old workstation (32bit OS). Installing under virtual XP is an option on my current 64bit windows7 workstation, and that is something I do for really old apps (like 16bit apps). Shouldn't be necessary to run a 32bit app in a virtual environment on a 64bit windows7 that runs both 64bit and 32bit apps (half of the windows7 bundled apps are still 32bit). Still looking for the 32bit installation solution before resorting to that.

Camera raw update problem loaded on cs6 32bit but not the default 64bit.

Hi to all.
Can you help? I recently updated to 8.8 camera raw after buying a new camera and there was a problem with the installation. It told me that there was a problem writing to cs6. I clicked ignore an the installation completed. The problem is that it has updated to the 32bit version but still shows 7.1 on the 64bit (default). I am running on windows 7 64 bit. Any hel[p with a solution would be appreciated.
Thanks
Update
I did a bit more research on the forum and found a discussion referring to pse which gave instruction to open the archive on the camera raw exe. file and manually copy the 8bi files into the correct location in the C drive eg:
C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\CS6\File Formats
C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\CC\File Formats and
C:\Program Files\Common Files\Adobe\Plug-Ins\CC\File Formats
C:\Program Files\Common Files\Adobe\Plug-Ins\CS6\File Formats
Wait for it this didn't work and completely removed camera raw from the about plugin menu on ps6 64 bit. It worked on cs6 32 bit.
The solution was to then reinstall the plugin via the installation .exe file and all was back as it should be. The only problen now is that adobe bridge has the camera raw preferences greyed out.....I am working on a fix for this and will post if I find it. I hope this helps someone.

Hi Michelle
I am new to the forum so I apologise. I should have mentioned in my update that the installer that fixed the problem was the ACR 9.0. I had originally used the 8.8 installer which caused the problem from ACR 7.1.
Initially the installer didn't work 64 bit version still had 7.1 but it installed ACR 9.0 on the 32 bit. I then proceeded to manually unzip the exe file ACR 9.0 and coped the 8bi file to the locations stated in my update. This didn't affect the 32 bit cs6 but completely removed ACR from the 64 bit. I re ran the ACR 9.0.exe file and everything was fixed.
I hope that this makes sense. I have now developed a problem on Bridge though. I can open raw file in photoshop but I can't view previews and the camera raw preferences are greyed out. I have read elsewhere that other people have had the same problem.

P-35 Patuinum XP Pro 32BIT- To Upgrade to Windows 7 64Bit???

Hello and this what I have at present >
MSI P-35 Platinum MoBo/3.3GB DDR memory/Intel Core2 2.4 Q6600 CPU/ Nvidia GeForce PCI-e 8600GT-512MB /500GB Internal WD HDD/500GB Ext, WD HDD/WinXP SP2/ NERO 9/ recently purchased Pinnacle Studio MovieBoard PCI card that doesn't work with XP Pro 32Bit, SP2, that's one of the reasons I'd like to upgrade.
Technology can be expensive. Always changing. I would like to upgrade from XP PRO 32,to Windows 7- 64, granted, I would rather have 8GB memory for my MEM hungry Photoshop CS4, but because of my 32Bit OS, I can not. Is it worth it to upgrade to the 64Bit,then have to upgrade my 8600GT, then buy more Ram (I have 4 sticks @ 1GB each) will have to replace with 8GB.
Can anyone tell me if my optical CD/DVD drive swill be ok, or a non-issue?
Epson NX300 Scanner/Printer all-in-one? Intel Core2 Quad 6600?
MSI P-35 Platinum MoBo? Will all this be a nightmare....OR stick to 32 Bit Windows7? If I build my own, I was thinking of getting the OEM system build version of Pro 7.
Change is scary...and can be very expensive as well. Took me a long tome to change from Windows 98 to XP, Love XP...will I love Windows 7?
I want to do video editing too. I bought the pinnacle Studio MovieBoard and studio12 software, but having issues with the capture..most tell me to upgrade to fix issues. I'm getting sound capture, but no video using composite connections to analog Camcorder.
I use the MSI Liveupdate utility for my MSO MoBo, but if I want to download drivers and save them on a flash drive to install after the clean install of Win7, I can get them all here @ MSI?
Are there any other peeps out there who just might happen to have my same board and is upgrading from WinXP/32 to Windows 7/64, and is there any thing I need to know?
( I went to download the Nvidia Geforce 8600GT driver from MSI, but under the list my model doesn't even come up? 8600GT #512-P2-N756-TR, I thought it better to get it from MSI since they are the Mobo maker as opposed to going to Geforce. Does it matter?

Depending on hardware, you can expect somewhere between 2.5 ~ 3.5 GB of usable RAM. The 32bit OS can address 4GB of address space. Part of this address space is RAM, but also, the onboard components and VGA are in the address space. Today's VGAs often have a large amount of video RAM and that eats into the address space. If you have a VGA with 2GB of ram or a crossfire/SLI configuration, you can expect far less Physical RAM to be available in a 32bit OS.

Will Vista 32bit serial number work on 64bit Vista?

Hi, I ordered my T400 with 32bit verison of Vista business but I now need to switch to 64bit version - does anybody have experience in trying it?
Or do I have to buy new Win Vista 64bit?

you can also follow this guide over at NBR.
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

HT3696 I have a Core Duo 32bit system. Is there anyway to upgrade to a 64bit?

It seems I jumped on the new Intel based Minis too soon. I have upgraded all that I can...that I know at least. I have 10.6.8. An Intel, but its only Core Duo. I wanted to buy some apps, but it seems they all require 64bit!!!...at least the ones I have looked at. Is there any way that I can replace a 32bit system to a 64bit without actually buying a completely new system?!

Hi, actually you can upgradeto a Core 2 Duo CPU...
http://www.ifixit.com/Answers/View/51699/Core+Duo+CPU+upgrade+to+Core+2+Duo+CPU
http://www.ifixit.com/Answers/View/45536/Mac+CPU+upgrade+speed

Upgrading SolMan 3.1 (32bit) to SolMan 4.0 (64bit)

Hello all,
We currently run SolMan v3.1 on aged 32bit hardware and we plan to upgrade this to SolMan v4 on a new 64bit infrastructure. As part of this task, we would also like to move from Windows 2000 to Windows 2003 x64 and from Oracle 9.2 to Oracle 10.2
The current situation is that the new server is built to Windows 2003 x64 level only. Nothing else is installed on the new server at this time. My plan was to install Oracle 9.2 and SolMan 3.1 and then take a system copy of the existing database and then upgrade it to SolMan v4 and Oracle 10.2 (leaving the old system as-is for recovery reasons, should we run into problems).
Has anyone any experience of doing this in a Windows and Oracle environment who could help me with getting this right?
Many thanks,
Arwel Owen.

I answered you in another duplicated post at Re: Upgrading Oracle 9.2 (32bit Windows 2000) to 10.2 (64bit Windows 2003)
Message was edited by:
Eric Brunelle

Acrobat Pro installed on a Windows 2003 32bit server - where's the 64bit driver?

Hello.
I'm still newbie with Acrobat Pro so please bear with me if this is a silly question.
A prospect of ours installed the TRIAL version of Acrobat Pro Extended on a 32bit Windows 2003 server and everything went fine; this server "serves" a number of Windows 7 64bit boxes which are supposed to share the PDF Printer created on the Win2003 server during the installation.
Problem is that when the printer gets shared and clients try to install it, the 64bit driver could not be found.
The customer tried to install the 64bit driver on the Win2003 box but he does not know where to find the correct .INF file for 64bit windows client.
Thanks,
Rob

Two facts for consideration. As I understand it the trail only comes in 64-bit. Don't know for sure since I have never downloaded it, but that is a faint memory.
More importantly, read the EULA carefully before you purchase for the type of application you listed. The general EULA does not allow the use of Acrobat on a server in the manner you have indicated. You have to purchase Acrobat for each machine, not a server. You may have enough that need to use the product that a volume license is in order -- contact Adobe for that. In the meantime, use the Acrobat Trail to test the features and such to be sure it meets your needs (other than the server use).

Install only 32bit version of AX Flash Player for IE8 and Windows 7 64bit

Hi,
For several reasons I would like to install only the 32bit version of Flash Player AX for IE 8 and Windows 7 64bit.
It was possible to do it when the installers where separated but I see no information how to do that now.
It is very convenient for me to have my 64 bit IE 8 browser without Flash that I use to browse and not get annoyed by the flash on the web and use the 32bit IE 8 on youtube, vimeo, etc when flash is necessary.
I hope the option to choose which version to install will get back if it is not possible now.
Please let me know if such kind of request should be made somewhere else as new feature or whatever.
Thank you.

That was the first thing I tried. It either works on both or disables on both versions. Something is messed with the settings as well, or has been made that way on purpose. Also the next thing I tried was to uninstall only the part residing in System 32 (leaving the one in SysWOW64) but the result was both not working after the uninstall. It remained in Programs but wasn't working anymore in both versions of IE 8. So I just put back the latest 32bit version which is not security wise..

32bit Synth Not Recognized On 64bit Snow Leopard! Help Please!

Hey guys.
Thanks In advance. I've read through a lot of other peoples problems and learnt a lot through the forum.
My problem is I have a Korg M3 that only has 32bit drivers available for it. Snow Leopard is not recognizing the synth any more and its killing me a little on the inside trying to find a work around. I was just wondering if there are any solutions people have come up with or if there are any programs that will mask or bridge the bit rate.
The Korg web site has a 64bit update for the drivers for windows but not yet for mac, but I kinda need it because I'm meant to be playing a show in a bit over a week and I'm hoping I don't have to revert back an OS.
Any help would greatly be appreciated.

Hey. I know the response is a bit late but my net died.
When I send the panic command there is no response from the synth. It actually sends note value data to the synth right?
I tested this by telling the synth to start a drum pattern as soon as it received note data, obviously with no luck.

10.1.0.5 32bit - 10.2.0.4 64bit x86 upgrade on Windows

Similar Messages

Maybe you are looking for