10.1 T-Mo typing language selection problem z10.

Z10STL100-3/10.1.0.2025 
Ever since I installed the new software on Monday, I've had a problem with the languages on the phone. I have everything set up in English, with secondary Spanish keyboard input. I don't have the auto-detect turned on because it predicts lots better by choosing the language myself. 
Now, the bug shows up when trying to choose a language by holding the comma key. When pressing it on my previous version, the highlighted language used to match the language I was using, and I could switch to the other. Now I can be typing in English and it will show Spanish and vice versa. Switching languages has become difficult because you don't really know what language you're in until you start typing. Not a terrible bug, but it does become very annoying, especially since it worked so beautifully on the previous version. 
And what's with constantly suggesting "**bleep**" as the next word? I swear I don't talk about penises.... I didn't teach it that. 

I would probably start looking at the ram to see if it's worked loose or a board has gone bad (rare, but it happens).
Make sure no external drives or other unnecessary connections.
If the ram doesn't fix the problem, then you could also Zap the PRAM by holding down the Command + Option + P + R keys during boot up. Hold down the keys until the Mac goes through 3 startup chimes, then just release the keys and continue to boot normally. Check your clock settings if it boots.
http://support.apple.com/kb/HT1379

Similar Messages

  • Language select problem

    Hello
    I install Adobe Photoshop CS4 for windows and the program never give me the oportunity to install in my language, Spanish.
    Only I have to install in English.......How can I do to change the language fromo Englis to Spanish considering that the DVD didnt give me the oportunity to select langauge.
    Thanks to all
    Dario

    You either do not have the right install DVD or the wrong type of serial. Language selection is dictated by a combination of the two. Contrary to public belief, there are different installers for different regions of the world as there are different serial numbers and if you e.g. bought a US version on your last trip to NY, it will never offer anything else but US or International English.
    Mylenium

  • Language-selection-class build problem

    my small program is goting to surpport language switching,e.g. Finnish, English,Chinese.
    it contains several pages with buttons and text there. in the 1st page we could select the language and then each page will display this language.
    how should the language selection class be create, could any1 show me the idea or a sample code somewhere.
    I think there should be a standard and simple way to make it. Thanks!

    http://java.sun.com/docs/books/tutorial/i18n/index.html

  • Why Photoshop CS6 does not include language selection ? dont want it on win8 language, I want in eng

    Right now I am installing the programs on my new 64 bits computer , which runs windows 8 in a language which is not english.
    At the very beginning of the setup I noticed that it detected the language of sist. op.  and that it would install cs6 in such language. 
    I am very, very ,very upset with this and I will tell you the reason :   the best in terms of  literature , pdfs books , tutorials , support forums ,etc is written in ENGLISH !  
    If I install cs6  I will have all menus , tools and resources in other language and it will be very cumbersome to work with it.
    Perhaps with the best of the intention to make people feel comfortable with their own language you have made it this way.
    But there are several other guys like me that want it IN ENGLISH.
    As a long time user of photoshop  I never worked in other language than english and I will never do it.
    It looks like it is a new trend to detect the op sistem  language , I have had the same problem with Nero Platinum 12 , and others.
    Is there a way to install Cs6  in english ?
    I have no idea whether adobe developers team read this forum but I will give my suggestion : don´t leave the setup to choose the language , this is dictartoship , be democratic and bring back the language selection menu.
    thanks

    The setup choice only defines the language for the EULA.
    You download the version for whichever language you want the app to be in.

  • Can't get past language selection with Leopard Install disk

    My 1 year old Intel Mac Mini, which had been running 10.5.4 without problems suddenly froze up. The mouse was still active but I couldn't click anything. I turned the system off with the power button. When I restarted it got as far as the login screen, but clicking the user didn't do anything. I was able to log in using safe mode (hold down shift when starting). I ran the disc utility, repaired permissions and verified the disc. Seemed OK, but still the same behavior (freeze at login screen) when I try to boot normally.
    I tried booting from the Leopard install disk. When it reached the language selection page there were some strange-looking horizontal lines in the display. Clicking the "proceed" button caused a copy of the button's graphic to appear at the top of the page and nothing else happened. Very puzzling, since I had upgraded OS X using that same disc.
    I have a Superduper backup from a couple of weeks ago. It won't boot up normally either. Any ideas? Unfortunately, I'm 2 weeks out of warranty!
    Thanks,
    jwstex

    I would probably start looking at the ram to see if it's worked loose or a board has gone bad (rare, but it happens).
    Make sure no external drives or other unnecessary connections.
    If the ram doesn't fix the problem, then you could also Zap the PRAM by holding down the Command + Option + P + R keys during boot up. Hold down the keys until the Mac goes through 3 startup chimes, then just release the keys and continue to boot normally. Check your clock settings if it boots.
    http://support.apple.com/kb/HT1379

  • My macbook is stuck on a grey screen with language select and every time i click english it brings me back to the same gray page what do i do?

    My macbook Pro is stuck on a grey screen with language select and every time i click english it brings me back to the same gray page with language select what do i do? Also i dont have enough monet to go to the apple store to get it fix and another thing this happen after i tried to factory reset it without the disck uising coomans i found on youtube.Lastly befor doing the comands my macbook would open any applications and the finder would just blink on and off on the dock.
    Heres the link http://www.youtube.com/watch?v=Q5e5thk0O9o

    Shut down your computer and disconnect all peripherals (keyboard & mouse if pertinent) from your computer.  Now reboot.
    If the Mac starts up normally, shut it down again and then plug in one of the peripherals (keyboard or mouse first) and start up your computer again.  If it does so successfully repeat the process, adding one peripheral at a time until your Mac acts up.  At that point, disconnect the last peripheral you added, reboot your Mac and search the peripheral vendor's website for an updated driver. 
    If no driver exists or the problem remain after installing the new driver, try a different cable or a different port on your Mac.
    If none of the above works, again disconnect all peripherals from your Mac, hold down the "shift" key to start up in "Safe Boot" mode. 
    If the Mac starts up correctly, restart without pressing the "shift" key.
    If your computer still does not start up properly, shut it down and restart it while holding down the Apple+Option-P-R keys; keep holding "all 4 keys" down until you hear the startup sound "twice."
    If none of the above work Disconnect all peripherals from your computer. Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
    Select your language.
    Once on the desktop, select Utility in the menu bar.
    Select Disk Utility.
    Select the disk or volume in the list of disks and volumes, and then click First Aid.
    Click Repair Disk.
    (If Disk Utility cannot repair, you will need a stronger utility (3rd party) - Diskwarrior or Techtool PRO)
    Restart your computer when done.
    Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751 and restart your computer.
    Remove any 3rd party ram.
    Reinstall Leopard - This will install a "fresh" copy Leopard without archiving old system files but leaves the rest of your files in place.
    If you still want to restore your computer to factory level...
    Start up from your install disc, go to Disk Utility and select the disk and click erase - to securely erase data click Security Options and Erase Free Space which will entirely wipe your disk, overwriting it with zeros so that no data is recoverable.
    To restore read the instructions in the Mac OS X v10.5 Leopard - Installation and Setup Guide  PDF

  • Netflix Language selection

        Ok,  I've looked at some of the posts,  all great posts.  But,  none answer my question.   I have the Apple TV And I do not have a Apple TV remote control.  I use the remote app on my iPad to control the Apple TV..   I'm a huge Anime fan and some are in Japanese with the option to watch in English Dub.   It defaults and starts up in Japanese and I don't know how to use my Remote App to select the English versions of the shows I want to watch.  Does the remote app have the ability to do language select?

    I just got off the phone with Netflix support. Specifically for Iron Man 2 and one of the Transformers movies it's a known issue. There is a temporary fix:
    1. Sign in to netflix.ca
    2. Change your account settings for video quality to anything except Best/HD.
    And that's it. I just tested it myself and it worked. He said you may have to wait an hour for the changes to come into effect, but I just logged out and then logged in to my Apple TV Netflix and it was done.
    He also mentioned this is a temporary workaround and they are working on it. Basically when they rent movies for use, they are given a package of different qualities and languages and they accidentally put the French HD in the English HD "slot". 
    Hope that helps!
    EDIT: This solution is only in direct response to X1Zero's problem. Sorry, OP.

  • At Line selection problem

    hi,
    iam stuck up with AT LINE-SELECTION problem ie i designed a screen where they need month list on clicking F4. i got the month list using month_names_get in the screen but while clicking the relevant month no.it's not entering into the required parameter. i have attached the codings,
    MODULE MONTH_DIS OUTPUT.
      SUPPRESS DIALOG.
      LEAVE TO LIST-PROCESSING AND RETURN TO SCREEN 0.
      SET PF-STATUS SPACE.
      NEW-PAGE NO-TITLE.
      WRITE:/ 'SELECT MONTH' COLOR COL_HEADING.
      ULINE.
      DATA: T_MNTH LIKE T247 OCCURS 12 WITH HEADER LINE.
      refresh t_mnth.
      CALL FUNCTION 'MONTH_NAMES_GET'
       EXPORTING
         LANGUAGE                    = SY-LANGU
    IMPORTING
      RETURN_CODE                 =
        TABLES
          MONTH_NAMES                 = T_MNTH
       EXCEPTIONS
         MONTH_NAMES_NOT_FOUND       = 1
         OTHERS                      = 2
      IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      loop at t_mnth.
        write:/ t_mnth-mnr, t_mnth-ltx.
      endloop.
      CLEAR T_MNTH-MNR.
    ENDMODULE.                 " MONTH_DIS  OUTPUT
    AT LINE-SELECTION.
      p_period = t_mnth-mnr.
      CHECK NOT p_period IS INITIAL.
      LEAVE TO SCREEN 0.
    here in the AT LINE-SELECTION, the selected month is not coming to the required parameter.
    pls help me in this issue,
    Thanks in advance,
    Premnath.

    You need to set a "Hide" after the write... I suggest you also set your own dialog PF-STATUS too so you can have just a PF2 "pick" button and a Cancel button ( this will look better to the user).
    loop at t_mnth.
      write:/ t_mnth-mnr, t_mnth-ltx.
      hide: t_mnth.  "needs this
    endloop.
    clear: t_mnth.

  • Language selection and closed captioning

    hi! i'm using adobe captivate 5 and i'm wondering if i can implement language selection for the narration in my presentation and at the same time have closed caption with it.
    like, i could choose english for the audio and caption then later choose i.e. german.
    thanks!

    I don't think you could do this in the same lesson without a lot of fancy AS3 widgetry underneath the hood.  It would not be easy.
    Your quickest and easiest way to implement such an idea is simply to have two versions of your course, one with English and the other in German,  Then you have a landing page that offers the learner the option (clickbox or button) to select their preferred language.  Clicking one or the other will branch them to open the relevant lesson.
    Where you may encounter problems with this is when you are using an LMS.  If you have both English and German lessons packaged together in the same course, the LMS will think the learner has only completed half of the total lessons.  In that case, you are forced to have two entirely different courses packaged as an English SCORM and a German SCORM.  The user would then be selecting their preferred language in the LMS, not in the Captivate lesson.

  • Language selection for spell check keeps reseting to "none"

    On Macbook Air, OS X 10.7.2, Pages '09, the language  selection for spell check resets to none as soon as I begin to type in the document

    I use Windows, and it is exactly as you said, Sir Hup.
    I made the change, in the drop-down list in the dialog box, in my case from 'English' (which I have to assume is US English) to 'Australian English'.
    The problem I am encountering is that making that change doesn't stick for the browser as a whole, but only for the input box on the tab, the dialog box was opened on.
    How do I get the change to apply for spell checking in the browser as a whole?
    Jenifur Charne

  • Language Selection Option - Pages 5.

    Hello!
       I am not to convinced about the Language Selection Options on new Pages 5. I do translations and work with different laguages simultaneously. With Pages '09 I had no problem with language.
    Pages 5 does not automatically detects language, how can I enable the auto language detection on Pages 5?

    Hi Tom,
       thank you for your prompt response. Actually  I never removed Pages 4... it's in use 95% of the time. I wanted to know if Apple had done something about that laguange-spelling issue.
    Cheers!

  • Language selection pops up after every boot.

    After every reboot, I first get the language selection option. Not a big problem, but I prefer not to have to select the language every time.
    Anyone any ideas how to switch this off?
    Thxs
    Solved!
    Go to Solution.

    Sometimes the chip itself can differ in size and contact surface.
    I remember this from way back, and if changing the SIM won't do the trick I suggest that you try reinstalling the phone software. That should definitely fix this.
    http://www.sonymobile.com/gb/tools/update-service/
     - Community Manager Sony Xperia Support Forum
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Language selection @ infopackage for 0sales_grp_text

    Dear All,
    I have a problem with language selection at infopackage.
    The Langu field is available in the datasource ( 0sales_grp_text ) for selection but at infopackage it is not displayed.
    please provide your inputs..
    Thanks in advance....
    LS

    Hi,
    If ur loading data to time dependent object , again for that those are maintained on time dependent basis(in ECC) then ucan assign those fields also
    when in info object level u select the time dependent tab(it will be there in Attribute tab) then info object level also u can get the to data from date.
    as per the present requirement need not required just leave it with selection language u can load the data,
    Thanks & Regards,
    sathish

  • Product Language Selection

    I had installed Oracle 9i release 2 onto my windows with different language selection. As stated, some of the components are installed with the selected language together with English version and when I invoked those components, it will be open with the selected language.
    The problem now is how can I choose the components to open in English instead of the selected language? Some of the developer can only read in English and not the selected language, therefore, it is quite a big problem! Please enlighten on how to revoke the English language components instead of the selected locale language.
    Thanks!
    Will

    Hi Nikhil,
    Thanks for your reply.
    Attributes to be defined for Org structure in ROS client -- Acc System for vendor, Local Currency, Acc Assgnmnt Cat, User role and system alias.
       I am trying to assign entries for Acc System for Vendor but I am not getting any value for this field. Same I am not able to assign the values in system Alias. Which roles have to be assigned for ROS client?
    I have mentioned value SBM_PRESCREENING for Attribute Catalog ID in SRM Client.
    Settings for u201CDefine System Landscapeu201D in SRM Client.
    Logical System - SP1CLNT500 (Logical System for SRM Client)
    Description - SP1CLNT500
    RFC Destination - SP1CLNT500
    Sys. Type - EBP_SUS (Is it correct?)
    Local u2013 X
    Logical System - SP1CLNT500
    Settings for u201CDefine System Landscapeu201D in ROS Client.
    Logical System - SP1CLNT500 (Logical System for SRM Client)
    Description - SP1CLNT500
    RFC Destination - SP1CLNT500 (Logical System for SRM Client)
    Sys. Type - EBP_SUS
    Local u2013 X
    Logical System - SP1CLNT500 (Logical System for SRM Client)
    1.     Any other entries required in ROS Client for Define System Landscape?
    2.     Why I am not getting any values for Attribute Acc System for vendor, System alias in PPOMA_BBP for ROS client? Whereas I am getting logical system values in Define System Landscape?
    3.     I have defined Sys. Type - EBP_SUS for Define System Landscape in SRM Client but we are not using SUS. Is it mandatory to define EBP_SUS or I have to define another Sys. Type. Please suggest me.
    4.     Which logical system has to be assigned for Define External Web Services for SRM Client and ROS Client? For SRM Client which logical system has to assign and for ROS Client which logical system has to assign for Define External Web Services?
    5.     I had defined Bus.Type of a WebService - Supplier Directory for Define External Web Services. Is it correct?
    Abhijeet

  • Stuck on Language select during installation

    This is coming via my brother who is reinstalling Leopard. He is using the disk that came with his laptop and when he gets to the language screen, it gets stuck on language select. He cannot click continue, and cannot even chose to select another language (not that he wants to, just saying he cannot). He has tried tabbing through the options and there is no response. The cursor will move around when on the touchpad, but nothing else. He is not using any external keyboard or mouse.
    I have tried searching, but cannot find an answer. Can anyone offer any insight as to what is happening and how to fix it? Thank you in advance for any advice.

    We could try a mouse, but the keyboard is not working either, so return will not be able to do anything sadly.
    I don't know if his problem stems from why he is reinstalling it. He was having really long load times after a restart or a shut down and it would take sometimes 5+ minutes to load the OS. The computer is not even a year old yet and we couldn't figure out what has happened. I got mine before him and have had no problems. So he was trying to reinstall and now he can't get past the language select screen. I don't know if it's totally freezing up...but like i said the cursor will move but no clicks or keyboard actions will register.

Maybe you are looking for