10.2.0.4 ------ 11.2.0.2 upgrade

Hi,
We are performing the upgrade from 10.2.0.4 to 11.2.0.2 database
I have run the pre upgrade script and have envountered the following error.
I have tried all possible ways given in google to solve the issue but the issue seems to be still existing.Can anyone of you help us to solve this isssue.
Miscellaneous Warnings
WARNING: --> Database is using a timezone file older than version 11.
.... After the release migration, it is recommended that DBMS_DST package
.... be used to upgrade the 10.2.0.4.0 database timezone version
.... to the latest version which comes with the new release.
WARNING: --> Database contains schemas with stale optimizer statistics.
.... Refer to the Upgrade Guide for instructions to update
.... schema statistics prior to upgrading the database.
.... Component Schemas with stale statistics:
.... SYS
PL/SQL procedure successfully completed.
Thanks,
Aram

Hi,
WARNING: --> Database is using a timezone file older than version 11.Upgrade your time zone file version.
WARNING: --> Database contains schemas with stale optimizer statistics.Run Gather schema statistics.
You can ignore these warnings and proceed with your upgrade, after successful completion of upgrade you can upgrade timezone file.
thanks,
X A H E E R

Similar Messages

Cannot open and update IPhoto after upgrading to OXYosemite

From the App store, I downloaded and installed OXYosemite. There are 2 more updates available: iPhoto and iMovie. When I try to upload them, the notice I get is "Update Unavailable with This Apple ID This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled."
I have 2 apple IDs when I inquire about my ids. Signing in App Store with either of them, doesn't resolve the problem. I get the same notice. iTunes, Mac, mobile downloads, all use the same apple IP, only for the computer downloads from App Store isn't working.
What should I do?
Thanks, Sev

I have the same problem and can't find out how to correct it. Unable to update iPhoto or iMovie .. I get the same message as above user. Help!

Open vi error for report generation toolkt

Originally it works fine.
Now I upgrade to win7, LV9 and office2010.
To open the old program by 8.6.1, I reinstalled LV 8.6.1 and report generation toolkit.
But still got the error as attached.
Any suggestion, thanks.
Attachments:
ss.png ‏184 KB

1. MS Office 2010 is not yet supported, since it's still just a beta. I believe there are couple of changes that Microsoft make, and it could cause a problem.
2. LabVIEW 8.6.1, and all its toolkit is not supported on Windows 7. This could cause a problkem also.
In conclusion, you should use LabVIEW 2009, Report Generation Toolkit 2009, Windows 7, and downgrade office to XP, 2003 or 2007.
More information: http://digital.ni.com/public.nsf/allkb/C9408B9F08D711E786256F3300701D01

Open DNS follow-up report

Interestingly, after a very positive experience by adding the open DNS numbers 208.67.222.222 and 208.67.220.220, I found today that every time I tried to open Safari it knocked me offline. So I've now resorted back to the number originally assigned to me.
What's going on with Safari?

Jake,
One Verizon DSL account; one Westell 6100 modem
Check with Verizon and find out what the max download / upload speeds should be.
If this is the plan you purchased: http://www22.verizon.com/residential/highspeedinternet/
*"And we’re constantly looking for ways to make our DSL faster—recently upgrading our Starter plan to 1 Mbps* download and our Turbo plan to 7.1 Mbps."*
1 Mbps download / 7.1 Mbps is hardly high speed.
You can check your upload/download speeds here. http://www.speedtest.net/
To realize faster download and uploads speeds you would need to upgrade your service.
This is more then just a DNS issue.

Mini DVI to Video Adapter - S-Video Resolutions / HDMI

Hello,
I just got my Mini DVI to Video Adapter and I using a S-Video cable to plug to my HD LCD 32'' TV.
When I connect everything, the resolution drops from 1280x800 to 1024x768.
How can I change back to 1280x800?
I don't know but I'm kind of disappointed with the QUALITY of the video... is there any way I could improve this? Perhaps using a Mini-DVI to HDMI Adapter? Does it exist? Will upgrade the resolution and/or the quality of the video?
I've read that audio is not supported using the Mini-DVI. To be honest, I don't really care about the audio... I can use the analog. But I'm very very disappointed with the quality of the video...
Thanks anyone

Well,
Based on what you said, I should have three options:
A: MacBook -> MiniDVI to DVI Adapter -> DVI to HDMI cable -> TV with HDMI input
C: MacBook -> MiniDVI to DVI Adapter -> DVI to DVI cable -> TV with DVI input
B: MacBook -> MiniDVI to HDMI Adapter -> HDMI cable -> TV with HDMI input
What should work best?
My TV does not support DVI input, so that's kind of narrow it down, right?! Leaving options A and C.
I don't have any of the adapters. In both ways I'll end up having to buy stuff. Which is less expansive?
Thanks in advance
Cheers.

Creative Mediasource ID3 Tags - Edit more than one year at a ti

I use a 60gb Zen Xtra with Mediasource. I take pride in the ID3 tags of all my files especially those of my Jazz collection and my player is well organised. The only thing I have to ask is - is there any way of editing the year of, say, an entire album that was recorded in 959 for example all at the same time. It lets me do this for Artist, Album and Genre but not year. Is there any upgrade in software I can get or am I just missing something here?
Thanks in advance for your input,Matt

Shucks, I tried and you can't seem to do it. A curious oversight.
You can either use another copying program like which will let you do it, or simply get a mass tagger (but you will need to edit the tracks on the PC first, then copy). For some mass tagger recommendations look here in the Zen FAQ at Nomadness.net.

How can I see Calendar event END times at a glance?

How can I display my Calendar event titles exactly as I type them? I do not want Calendar to remove duration from the titles of my events. Otherwise I can't see event END times at a glance in month view; only start times. How can I "trick" Calendar to just show my titles as I type them - as I always could before I upgraded. I used to be able to enter "Seminar 9am-5:45" and it would appear that way regardless of how or what I chose to enter (or not enter) for duration.
I am running OSX 10.9.3.

It's a bit weird, but if you type in the time info TWICE into the event title then Calendar uses/deletes one of them to populate the event details and leaves the other.
Apple - Mac OS X - Feedback

List view in iCal on my iPod touch is corrupted

The 'list view' seems to be all wonky in Calendar on my iPod touch.
The dates for a given day that's displayed don't make sense:
i.e. Sunday Oct. 27 2030 followed by Saturday July 14 2001 followed by Tuesday Jan. 16 2001 are listed in consecutive order instead of today, tomorrow and next day (with correct dates).
Also, the 'events' given for each day listed don't make sense and are often duplicated.
The 'day' and 'month' views however, seem to be ok and not corrupted. The 'list' field in the month view also seems fine ?
Has anybody experienced this ? Very frustrating, since I like the list view.
I make most of my entries/changes to iCal on our main desktop (iMac 24") then sync. to my iPod. The list view seems ok on the desktop.
Any help greatly appreciated.
ps. not sure if the problem corresponded with an upgrade of the Ipod software to OS 3.1 from 2.x....

See this previous discussion:
FIX for iPod Touch Home Button: Apple Support Communities

Annual VIew in iCal ?

Did I imagine this or is iCal finally going to offer a year view with the next upgrade ?

I'll answer my own question...Lion with feature an Year view with the upgrade in summer 2001...at long last.
http://www.youtube.com/watch?v=BfxhWCVTT84&feature=related

How can I Migrate/Split itunes/icloud account for a large family now that they have family sharing

Ok, now that Apple has finally come out with family sharing I need to get things sorted out and I think it is going to be a mess. I have 6 family members (my spouse and 4 children) all sharing/using one itunes account. For parental reasons this made perfect sense. Now with the the advent of family sharing and such we have alot of sorting and migrating to do and I am very unsure how to go about it. Here is what we have.
Myself - I have a 64GB iPad 3 and a 64GB iPhone 5
Spouse - 64GB iPhone 5
Children - x4 16GB iPhone 5C (pink, blue, green, and a yellow)
We have had one itunes account now for several years, we used to have x4 16GB iphone 4's and a 16GB iPod touch 4 so we needed it to be shared at the time. We all have different Game Center ID's and Facetime/iMessages are all setup to the phone numbers (aside from mine which also uses the itunes e-mail). We currently have 1 upgraded icloud account with 200GB of storage on it (love the new tiers). So here are the questions.
1) How do I go about using and isolating all the devices so they can all use the iCloud storage? Right now if I try and setup backups by device under the what to backup there is no simple "Full Backup" option, they have all the categories separated. I cannot backup my daughters contacts without forcing a merging of them and so on. Same thing with Documents and Data. Would I need to setup a different iCloud account for each device now?
2) iTunes Music/App purchases. Now that they have a family sharing function I am assuming it would be a good time to separate all the devices (aside from my personal iPad/iPhone). If I understand correctly we need to setup a new itunes account for each and link them with family sharing, does this then allow us to disperse/move items from a singular to the multiple account (at least a one time option to move around) or would it simply be shared off the original account? My daughter for example will be 18 next summer and as such no longer under our care. How do we move her items to her account? She has a lot of purchased Music. Now keep in mind I am talking about an account for someone who was 12 when she had her first device and as such needed to be under her parents.
I just want to state that repurchasing things is NOT an option, and to be frank, according to Canadian laws pertaining to *licensing* we actually own the product if we paid for it and have the right to transfer the ownership thereof. This issue went through the courts regarding used copies of OEM editions of Microsoft Windows several years ago and they closed the legal *license* vs ownership separation.

Go to appleid.apple.com to manage the ID, sign in and select to the Name, ID and Email Addresses section, then change the birth date on the bottom right. At the present time you may not be able to enter the correct birth date, but others have had success changing the year to 2000, or the date to 1/1/2001, both of which will have child ID status.

HP LaserJet Enterprise 500 color M551dn - Optional USB Device port

Hi, I'm hoping to buy the optional wireless print server (HP Jetdirect 2700w USB Wireless Print Server J8026A). There is one problem though, the optional USB device port seems to not exist on my printer. I only notice that the USB logo is present where the port is supposed to be. The plastic in the area is squared off as though it is some sort of break away tab and the port is underneath maybe.
There is no reference to this in the manual anywhere and I am really unsure how to proceed. I don't want to damage anything.
If someone experienced with this model (preferably an HP Employee) can confirm the availability of the port and tell me how to access it (Is it a break away tab?). Part of the reason why I bought this printer is the optional Wireless N print server.
Thank You in advance.

Thank You for your reply. The port you are talking about is the front panel port for walk-up usb printing and firmware upgrades. This port is indeed available on the higher end LaserJet 500 (NON-MFP, printer only edition) as I just used it to upgrade the firmware. The port I am talking about is the one on the left side in the ports section which you use to plug in the optional print server (not the computer I/O port).
This is shown in the official manual and the spec sheet so I'm 85% sure the port is there, hp can't advertise and mention something that is not available as this would be a big problem and make the 2700w print server incompatible when it clearly states that it is. I just need someone to confirm the availability and clear my confusion (either from HP, or another owner who bought the wireless print server 2700w).

IPod no longer works with car stereo since upgraded MBA & iTunes

My iPod classic has worked just fine connected to my car stereo since i bought it last june. I just bought a new Macbook Air (OS 10.7.3) & installed ITUNES 10.6.1. After I synched my ipod for the first time its recognised by the car but i get a "can't read data" message. I re-formatted my ipod but its exactly the same. Do you think its the upgrade- or the cable? Has anyone else found a bug with this version of Itunes or the OS? I have my doubts a cable would make the difference, and my old ipod nano that i haven't synched for a while works fine.

If standalone works fine, then, most likely the 30 pin connect may have some dirt or lint, prevent data transfer.
You can try to blow it clean, if you have a can of compressed air or gas.
Alternatively you can connect it to the car stereo and do the RESET, while connnected.as follows
Toggle the Hold switch, make sure you dont see the red mark when you do the next step
Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs or till the Apple Logo comes ON
Then release the buttons
Select your preferred language.
Here is the Apple support Article on the 5Rs
http://www.apple.com/support/ipod/five_rs/classic/
The Reset sequence may send a signal to the Car stereo to do the right thing

IPod not recognized by iTunes, Windows Vista prompts to format iPod drive

Hello,
I have IPod 80GB which I rarely use. Yesterday when I wanted to use it, I went to add a few new audios to it, connected to my computer and launched iTunes. I added the folder which contained audios to iPod, synced it and wanted to disconnect, but iTunes took excepionally long to finish.
When I clicked on 'eject' icon, I go a message saying 'some files are being accessed' or something like that. I waited for 5-10 minutes but it won't finish up, so I unplugged my iPod as I had to leave.
Later when I wanted to play, I noticed I had no audios in iPod at all.
Later when I got home, connected it again to computer, launched iTunes, but iTunes won't show iPod. A few minutes later, windows (Vista) prompted a message saying that it needs to format N: drive (which was iPod).
I tried diagnostics on tis site, restarted/reset iPod etc, but it didn't solve the problem. I removed and reinstalled iTunes as per instructions, still no use.
Then I called Apple support Canada and the guy on the phone said I need to pay to get support. He said he'd send me some documents via email which would solve the problem and hen I wouldn't have to pay. I gave him my email address, but so far I have recieved no emails from him. I have checked my spam and junk folders, just in case, but nothing there.
Anyhow, this issue came up all of a sudden, there has been no physical damage to iPod, I barely use it. maybe for few minutes here and there a month. I have had numerous problems in the past every time a new iTunes update come, it always creates problems. Last year I spent many hours after iTunes update make iPod unrecognizable so I had to go back to older version, then upgrade etc. I don't remember how I solved the issue, but it took a while and it turned out to be something of iTunes version issue.
I wonder if this is another of such issue. I hope its not a hardware issue with iPod. I'd appreciate any help.
Thanks

I just got Vista too and it does recognize my ipod, but itunes can't find a lot of my songs on the computer. I tried to uninstall itunes and reinstall it thinking that it would seach for new music when I installed it again but nothing new happened when I did that.

Cannot sync, error message "could not be read" for an iPod no longer in use

I have two problems. I upgraded iTunes to 7.2 and the very next morning my iPod died. It is completely unresponsive. Maybe it's coincidental. So I bought a new 80 gig iPod and gave it a different name than the old dead iPod. Now when I try to sync the new iPod, it goes for about 10 minutes, then it fails with this message:
Attempting to copy to the disk "old iPod name" failed. The disk could not be read from or written to.
It is complaining that it can not read the old dead iPod that is NOT hooked up to the computer! Somehow, minutes into syncing, iTunes has forgotten which iPod it is looking at. I have seen the article about the "cannont be read" message and it is not relevant. I need to make iTunes forget about the old dead iPod so it will stop looking for it. I've tried removing the files from "Documents and Settings" but iTunes still remembers the old unit. Where else does it store information? Any recommendations?
Windows XP

Attempting to copy to the disk "old iPod name" failed. The disk could not be read from or written to.
It is complaining that it can not read the old dead iPod that is NOT hooked up to the computer!
Okay, that can sometimes be caused by a Windows drive letter confusion. For troubleshooting advice on that possibility, see the following document:
Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear

Brand new IPOD Touch Apps no longer work after upgrading software

I got a Ipod touch for my wife Today at Wal-Mart. I brought it home, connected to wifi and downloaded some apps and also payed for some. They all worked fine. Then I connected to computer to transfer songs. It told me to upgrade the Ipod software so i Did. After it restarted none of the downloaded apps work anymore. I have read MANY MANY MANY discussions on this and there is no fix. I am not wiping out all the songs and reload everything all over again. It will take forever. My wifes BD is Friday and this is making me so mad after I just dropped $300 on this thing. APPLE!!! Where is the fix? I deleted the apps and reinstalled they still don't work. Anybody got this figured out? I am getting ready to get my money back and tell everyone to avoid buying ipod until they get this upgrade bug fixed.
Message was edited by: 2009 IPOD TOUCH

I have the same problem. Brand new two days ago. I synched the touch with Itunes but wasn't hooked up to the internet at the time so didn't do the software upgrade right away. Then I downloaded about a dozen apps (free and paid) with wifi directly to the touch. They all worked fine. Then I plugged it back in to Itunes and had it upgrade it to 3.1.2. It locked up Itunes several times since then and the downloaded apps no longer work (they start to open then disappear).
The problem is, no one is listening to this problem (including Anna above)! Everyone says "just do a hard reboot, or restore to factory settings, reload the apps, etc." I've tried all the standard troubleshooting but none of it fixes this. It sure seems to me this is a problem with 3.1.2 but Apple isn't helping out here. Where are you APPLE? Use some of those outrageous profits you're making to fix the problem you have created. Here's $300 of my hard earned dollars pretty much down the drain.
Message was edited by: IPatronius

Xorg 1.10.1 no longer affected by manual DPI setting

I use my 23 inch 1920x1080 monitor as TV also. As this means I sit rather far from it, I manually set DPI quite low to enlarge windows and fonts by default. However after the last upgrade, which brought Xorg 1.10 and Gnome 3, Xorg seems to no longer be affected by my setting DPI in xorg.conf. The logs show that the value is read, and xdpyinfo shows the DPI I have set manually, but this setting no longer seems to affect any windows or fonts.
The DPI is set via the nvidia driver. Relevant parts of xorg.conf and the full Xorg.0.log are attached.
Does anyone know what could have caused this?
xorg.conf:
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
Option "DPI" "60x60"
EndSection
Xorg.0.log:
[ 45267.074]
X.Org X Server 1.10.1
Release Date: 2011-04-15
[ 45267.074] X Protocol Version 11, Revision 0
[ 45267.074] Build Operating System: Linux 2.6.38-ARCH x86_64
[ 45267.074] Current Operating System: Linux norstaurar 2.6.38-ARCH #1 SMP PREEMPT Fri May 13 09:24:47 CEST 2011 x86_64
[ 45267.074] Kernel command line: root=/dev/disk/by-uuid/41bd750d-271b-4392-898a-51e284889d43 ro
[ 45267.074] Build Date: 16 April 2011 12:02:01PM
[ 45267.074]
[ 45267.074] Current version of pixman: 0.20.2
[ 45267.074] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 45267.074] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 45267.074] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 3 10:40:17 2011
[ 45267.074] (==) Using config file: "/etc/X11/xorg.conf"
[ 45267.074] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 45267.075] (==) ServerLayout "Layout0"
[ 45267.075] (**) |-->Screen "Screen0" (0)
[ 45267.075] (**) | |-->Monitor "Monitor0"
[ 45267.075] (**) | |-->Device "Device0"
[ 45267.075] (**) |-->Input Device "Keyboard0"
[ 45267.075] (**) |-->Input Device "Mouse0"
[ 45267.075] (==) Automatically adding devices
[ 45267.075] (==) Automatically enabling devices
[ 45267.075] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 45267.075] Entry deleted from font path.
[ 45267.075] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 45267.075] Entry deleted from font path.
[ 45267.075] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 45267.075] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 45267.075] Entry deleted from font path.
[ 45267.075] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 45267.075] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 45267.075] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 45267.075] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 45267.075] (WW) Disabling Keyboard0
[ 45267.075] (WW) Disabling Mouse0
[ 45267.075] (II) Loader magic: 0x7d6fa0
[ 45267.075] (II) Module ABI versions:
[ 45267.075] X.Org ANSI C Emulation: 0.4
[ 45267.075] X.Org Video Driver: 10.0
[ 45267.075] X.Org XInput driver : 12.2
[ 45267.075] X.Org Server Extension : 5.0
[ 45267.076] (--) PCI:*(0:2:0:0) 10de:0848:1043:82f2 rev 162, Mem @ 0xfd000000/16777216, 0xf0000000/134217728, 0xfa000000/33554432, I/O @ 0x0000ec00/128, BIOS @ 0x????????/131072
[ 45267.076] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 45267.076] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[ 45267.076] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[ 45267.076] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 45267.076] (II) "record" will be loaded by default.
[ 45267.076] (II) "dri" will be loaded by default.
[ 45267.076] (II) "dri2" will be loaded by default.
[ 45267.076] (II) LoadModule: "dbe"
[ 45267.077] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 45267.077] (II) Module dbe: vendor="X.Org Foundation"
[ 45267.077] compiled for 1.10.1, module version = 1.0.0
[ 45267.077] Module class: X.Org Server Extension
[ 45267.077] ABI class: X.Org Server Extension, version 5.0
[ 45267.077] (II) Loading extension DOUBLE-BUFFER
[ 45267.077] (II) LoadModule: "extmod"
[ 45267.077] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 45267.077] (II) Module extmod: vendor="X.Org Foundation"
[ 45267.077] compiled for 1.10.1, module version = 1.0.0
[ 45267.077] Module class: X.Org Server Extension
[ 45267.077] ABI class: X.Org Server Extension, version 5.0
[ 45267.077] (II) Loading extension MIT-SCREEN-SAVER
[ 45267.077] (II) Loading extension XFree86-VidModeExtension
[ 45267.077] (II) Loading extension XFree86-DGA
[ 45267.077] (II) Loading extension DPMS
[ 45267.077] (II) Loading extension XVideo
[ 45267.077] (II) Loading extension XVideo-MotionCompensation
[ 45267.077] (II) Loading extension X-Resource
[ 45267.077] (II) LoadModule: "glx"
[ 45267.077] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 45267.092] (II) Module glx: vendor="NVIDIA Corporation"
[ 45267.092] compiled for 4.0.2, module version = 1.0.0
[ 45267.092] Module class: X.Org Server Extension
[ 45267.092] (II) NVIDIA GLX Module 270.41.19 Mon May 16 23:48:30 PDT 2011
[ 45267.092] (II) Loading extension GLX
[ 45267.092] (II) LoadModule: "record"
[ 45267.092] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 45267.092] (II) Module record: vendor="X.Org Foundation"
[ 45267.092] compiled for 1.10.1, module version = 1.13.0
[ 45267.092] Module class: X.Org Server Extension
[ 45267.092] ABI class: X.Org Server Extension, version 5.0
[ 45267.092] (II) Loading extension RECORD
[ 45267.092] (II) LoadModule: "dri"
[ 45267.092] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 45267.092] (II) Module dri: vendor="X.Org Foundation"
[ 45267.092] compiled for 1.10.1, module version = 1.0.0
[ 45267.092] ABI class: X.Org Server Extension, version 5.0
[ 45267.092] (II) Loading extension XFree86-DRI
[ 45267.092] (II) LoadModule: "dri2"
[ 45267.092] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 45267.092] (II) Module dri2: vendor="X.Org Foundation"
[ 45267.092] compiled for 1.10.1, module version = 1.2.0
[ 45267.092] ABI class: X.Org Server Extension, version 5.0
[ 45267.093] (II) Loading extension DRI2
[ 45267.093] (II) LoadModule: "nvidia"
[ 45267.093] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 45267.093] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 45267.093] compiled for 4.0.2, module version = 1.0.0
[ 45267.093] Module class: X.Org Video Driver
[ 45267.094] (II) NVIDIA dlloader X Driver 270.41.19 Mon May 16 23:33:35 PDT 2011
[ 45267.094] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 45267.094] (++) using VT number 8
[ 45267.096] (II) Loading sub module "fb"
[ 45267.096] (II) LoadModule: "fb"
[ 45267.096] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 45267.097] (II) Module fb: vendor="X.Org Foundation"
[ 45267.097] compiled for 1.10.1, module version = 1.0.0
[ 45267.097] ABI class: X.Org ANSI C Emulation, version 0.4
[ 45267.097] (II) Loading sub module "wfb"
[ 45267.097] (II) LoadModule: "wfb"
[ 45267.097] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 45267.097] (II) Module wfb: vendor="X.Org Foundation"
[ 45267.097] compiled for 1.10.1, module version = 1.0.0
[ 45267.097] ABI class: X.Org ANSI C Emulation, version 0.4
[ 45267.097] (II) Loading sub module "ramdac"
[ 45267.097] (II) LoadModule: "ramdac"
[ 45267.097] (II) Module "ramdac" already built-in
[ 45267.097] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 45267.097] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 45267.097] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 45267.097] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 45267.097] (==) NVIDIA(0): RGB weight 888
[ 45267.097] (==) NVIDIA(0): Default visual is TrueColor
[ 45267.097] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 45267.097] (**) NVIDIA(0): Option "DPI" "60x60"
[ 45267.369] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-0)) does not support NVIDIA
[ 45267.369] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 45267.370] (II) NVIDIA(0): NVIDIA GPU GeForce 8300 (C77) at PCI:2:0:0 (GPU-0)
[ 45267.370] (--) NVIDIA(0): Memory: 524288 kBytes
[ 45267.370] (--) NVIDIA(0): VideoBIOS: 62.77.2f.00.00
[ 45267.370] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 45267.370] (--) NVIDIA(0): Connected display device(s) on GeForce 8300 at PCI:2:0:0
[ 45267.370] (--) NVIDIA(0): Samsung SyncMaster (DFP-0)
[ 45267.370] (--) NVIDIA(0): Samsung SyncMaster (DFP-0): 165.0 MHz maximum pixel clock
[ 45267.370] (--) NVIDIA(0): Samsung SyncMaster (DFP-0): Internal Single Link TMDS
[ 45267.372] (WW) NVIDIA(0): The EDID for Samsung SyncMaster (DFP-0) contradicts itself:
[ 45267.372] (WW) NVIDIA(0): mode "720x480" is specified in the EDID; however, the
[ 45267.372] (WW) NVIDIA(0): EDID's valid HorizSync range (27.000-81.000 kHz) would
[ 45267.372] (WW) NVIDIA(0): exclude this mode's HorizSync (15.7 kHz); ignoring
[ 45267.372] (WW) NVIDIA(0): HorizSync check for mode "720x480".
[ 45267.372] (WW) NVIDIA(0): The EDID for Samsung SyncMaster (DFP-0) contradicts itself:
[ 45267.372] (WW) NVIDIA(0): mode "720x576" is specified in the EDID; however, the
[ 45267.372] (WW) NVIDIA(0): EDID's valid HorizSync range (27.000-81.000 kHz) would
[ 45267.372] (WW) NVIDIA(0): exclude this mode's HorizSync (15.6 kHz); ignoring
[ 45267.372] (WW) NVIDIA(0): HorizSync check for mode "720x576".
[ 45267.375] (WW) NVIDIA(0): The EDID for Samsung SyncMaster (DFP-0) contradicts itself:
[ 45267.375] (WW) NVIDIA(0): mode "720x480" is specified in the EDID; however, the
[ 45267.375] (WW) NVIDIA(0): EDID's valid HorizSync range (27.000-81.000 kHz) would
[ 45267.375] (WW) NVIDIA(0): exclude this mode's HorizSync (15.7 kHz); ignoring
[ 45267.375] (WW) NVIDIA(0): HorizSync check for mode "720x480".
[ 45267.376] (WW) NVIDIA(0): The EDID for Samsung SyncMaster (DFP-0) contradicts itself:
[ 45267.376] (WW) NVIDIA(0): mode "720x576" is specified in the EDID; however, the
[ 45267.376] (WW) NVIDIA(0): EDID's valid HorizSync range (27.000-81.000 kHz) would
[ 45267.376] (WW) NVIDIA(0): exclude this mode's HorizSync (15.6 kHz); ignoring
[ 45267.376] (WW) NVIDIA(0): HorizSync check for mode "720x576".
[ 45267.402] (II) NVIDIA(0): Assigned Display Device: DFP-0
[ 45267.402] (==) NVIDIA(0):
[ 45267.402] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 45267.402] (==) NVIDIA(0): will be used as the requested mode.
[ 45267.402] (==) NVIDIA(0):
[ 45267.402] (II) NVIDIA(0): Validated modes:
[ 45267.402] (II) NVIDIA(0): "nvidia-auto-select"
[ 45267.402] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 45267.426] (**) NVIDIA(0): DPI set to (60, 60); computed from "DPI" X config option
[ 45267.426] (--) Depth 24 pixmap format is 32 bpp
[ 45267.426] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 45267.430] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 45267.430] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 45267.430] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 45267.430] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 45267.430] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 45267.430] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 45267.430] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 45267.430] (II) NVIDIA(0): Config Options in the README.
[ 45267.431] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 45267.472] (II) Loading extension NV-GLX
[ 45267.508] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 45267.508] (==) NVIDIA(0): Backing store disabled
[ 45267.508] (==) NVIDIA(0): Silken mouse enabled
[ 45267.509] (**) NVIDIA(0): DPMS enabled
[ 45267.509] (II) Loading extension NV-CONTROL
[ 45267.510] (II) Loading extension XINERAMA
[ 45267.510] (II) Loading sub module "dri2"
[ 45267.510] (II) LoadModule: "dri2"
[ 45267.510] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 45267.510] (II) Module dri2: vendor="X.Org Foundation"
[ 45267.510] compiled for 1.10.1, module version = 1.2.0
[ 45267.510] ABI class: X.Org Server Extension, version 5.0
[ 45267.510] (II) NVIDIA(0): [DRI2] Setup complete
[ 45267.510] (==) RandR enabled
[ 45267.510] (II) Initializing built-in extension Generic Event Extension
[ 45267.510] (II) Initializing built-in extension SHAPE
[ 45267.510] (II) Initializing built-in extension MIT-SHM
[ 45267.510] (II) Initializing built-in extension XInputExtension
[ 45267.510] (II) Initializing built-in extension XTEST
[ 45267.510] (II) Initializing built-in extension BIG-REQUESTS
[ 45267.510] (II) Initializing built-in extension SYNC
[ 45267.510] (II) Initializing built-in extension XKEYBOARD
[ 45267.510] (II) Initializing built-in extension XC-MISC
[ 45267.510] (II) Initializing built-in extension SECURITY
[ 45267.510] (II) Initializing built-in extension XINERAMA
[ 45267.510] (II) Initializing built-in extension XFIXES
[ 45267.510] (II) Initializing built-in extension RENDER
[ 45267.510] (II) Initializing built-in extension RANDR
[ 45267.510] (II) Initializing built-in extension COMPOSITE
[ 45267.510] (II) Initializing built-in extension DAMAGE
[ 45267.512] (II) Initializing extension GLX
[ 45267.586] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 45267.586] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 45267.586] (II) LoadModule: "evdev"
[ 45267.586] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 45267.586] (II) Module evdev: vendor="X.Org Foundation"
[ 45267.586] compiled for 1.10.0, module version = 2.6.0
[ 45267.586] Module class: X.Org XInput Driver
[ 45267.586] ABI class: X.Org XInput driver, version 12.2
[ 45267.586] (II) Using input driver 'evdev' for 'Power Button'
[ 45267.586] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 45267.586] (**) Power Button: always reports core events
[ 45267.586] (**) Power Button: Device: "/dev/input/event3"
[ 45267.605] (--) Power Button: Found keys
[ 45267.605] (II) Power Button: Configuring as keyboard
[ 45267.605] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 45267.605] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 45267.605] (**) Option "xkb_rules" "evdev"
[ 45267.605] (**) Option "xkb_model" "evdev"
[ 45267.605] (**) Option "xkb_layout" "se"
[ 45267.636] (II) config/udev: Adding input device Video Bus (/dev/input/event1)
[ 45267.636] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 45267.636] (II) Using input driver 'evdev' for 'Video Bus'
[ 45267.636] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 45267.636] (**) Video Bus: always reports core events
[ 45267.636] (**) Video Bus: Device: "/dev/input/event1"
[ 45267.648] (--) Video Bus: Found keys
[ 45267.648] (II) Video Bus: Configuring as keyboard
[ 45267.648] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:12/LNXVIDEO:00/input/input1/event1"
[ 45267.648] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 45267.648] (**) Option "xkb_rules" "evdev"
[ 45267.648] (**) Option "xkb_model" "evdev"
[ 45267.648] (**) Option "xkb_layout" "se"
[ 45267.650] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 45267.650] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 45267.650] (II) Using input driver 'evdev' for 'Power Button'
[ 45267.650] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 45267.650] (**) Power Button: always reports core events
[ 45267.650] (**) Power Button: Device: "/dev/input/event2"
[ 45267.662] (--) Power Button: Found keys
[ 45267.662] (II) Power Button: Configuring as keyboard
[ 45267.662] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 45267.662] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 45267.662] (**) Option "xkb_rules" "evdev"
[ 45267.662] (**) Option "xkb_model" "evdev"
[ 45267.662] (**) Option "xkb_layout" "se"
[ 45267.666] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event5)
[ 45267.666] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 45267.666] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 45267.666] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 45267.666] (**) Logitech USB Receiver: always reports core events
[ 45267.666] (**) Logitech USB Receiver: Device: "/dev/input/event5"
[ 45267.675] (--) Logitech USB Receiver: Found keys
[ 45267.675] (II) Logitech USB Receiver: Configuring as keyboard
[ 45267.675] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/usb4/4-3/4-3:1.0/input/input5/event5"
[ 45267.675] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
[ 45267.675] (**) Option "xkb_rules" "evdev"
[ 45267.675] (**) Option "xkb_model" "evdev"
[ 45267.675] (**) Option "xkb_layout" "se"
[ 45267.676] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event6)
[ 45267.676] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 45267.676] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 45267.676] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 45267.676] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 45267.676] (**) Logitech USB Receiver: always reports core events
[ 45267.676] (**) Logitech USB Receiver: Device: "/dev/input/event6"
[ 45267.685] (--) Logitech USB Receiver: Found 12 mouse buttons
[ 45267.685] (--) Logitech USB Receiver: Found scroll wheel(s)
[ 45267.685] (--) Logitech USB Receiver: Found relative axes
[ 45267.685] (--) Logitech USB Receiver: Found x and y relative axes
[ 45267.685] (--) Logitech USB Receiver: Found absolute axes
[ 45267.685] (--) Logitech USB Receiver: Found keys
[ 45267.685] (II) Logitech USB Receiver: Configuring as mouse
[ 45267.685] (II) Logitech USB Receiver: Configuring as keyboard
[ 45267.685] (II) Logitech USB Receiver: Adding scrollwheel support
[ 45267.685] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 45267.685] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 45267.685] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/usb4/4-3/4-3:1.1/input/input6/event6"
[ 45267.685] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
[ 45267.685] (**) Option "xkb_rules" "evdev"
[ 45267.685] (**) Option "xkb_model" "evdev"
[ 45267.685] (**) Option "xkb_layout" "se"
[ 45267.685] (II) Logitech USB Receiver: initialized for relative axes.
[ 45267.685] (WW) Logitech USB Receiver: ignoring absolute axes.
[ 45267.686] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 45267.686] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 45267.686] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 45267.686] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 45267.686] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 45267.686] (II) No input driver/identifier specified (ignoring)
[ 45267.687] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event4)
[ 45267.687] (II) No input driver/identifier specified (ignoring)
[ 45267.692] (II) config/udev: Adding input device PC Speaker (/dev/input/event0)
[ 45267.692] (II) No input driver/identifier specified (ignoring)

I seem to have been unclear in my original post. Setting it in Gnome 3 would all be fine and dandy, however although Gnome 3 was installed (upgraded from 2.x), I use fvwm. Gtk etc is still used but I don't see why upgrading a DE I don't use would impair another WM from using the X11 DPI settings. Also changing that setting in Gnome 3 does not affect neither the login screen (GDM) nor anything in fvwm.

10.2.0.4 ------ 11.2.0.2 upgrade

Similar Messages

Maybe you are looking for