10.2 crashes when I try to convert old libraries for use in the new software. Is there a workaround for this? Or will i have to continue using the previous version to complete older projects?

Final Cut Pro X 10.2 crashes when I try to convert old libraries for use in the new software. Is there a workaround for this? Or will I have to continue using the previous version to complete older projects? the only foreseeable solution is to begin any new projects on 10.2 or importing footage on 10.2 and starting form scratch--which is something i definitely don't want to do or have time to do. ANY advice, thoughts, or opinions would be greatly appreciated! Thank you!
Running 10.10.3 // MacBook Pro (Retina, 15-inch, Early 2013) // 2.4 GHz Intel Core i7 // 8 GB 1600 MHz DDR3

Exactly the same problem with me.
Some other threads advice to remove fonts, clean the caches, remove add ins but nothing works consistenty, for some it looks like it works, for me it failed.
What I did not try yet, was to move the Render files out of the malicious library to trash.

Similar Messages

  • Hi can someone please help, my imac crashed, when i try to start it up, it just beeps loudly 3 times, then there is a pause before it beeps 3 more times, this just continues to happen, any sugestions? please help

    Hi can someone please help, my imac crashed, when i try to start it up, it just beeps loudly 3 times, then there is a pause before it beeps 3 more times, this just continues to happen, any sugestions? please help

    allanpar wrote:
    i am having to use my laptop to post this question, missing my imac so much, its just not the same using this slow windows laptop.
    Then maybe it's time to buy a new Windows notebook.
    The RAM has either gone bad or somehow become unseated. Also there is the chance that the RAM slots have failed.

  • Have 2 Apple TVs. I rented a movie on 1 box but I want to finish watching it in another room on a different Apple TV. When I try it Apple TV wants me to rent it again. Is there a fix for this?

    Have 2 Apple TVs. I rented a movie on 1 box but I want to finish watching it in another room on a different Apple TV. When I try it Apple TV wants me to rent it again. Is there a fix for this?

    Welcome to the Apple Community.
    Content rented anywhere else other than on a computer can only be watched on the device it is rented from. If you want to watch a rental on multiple devices, rent it from the computer.

  • Iphoto crashes when I try to print - just moved moved iPhoto to my new iMac

    I just bought a new iMac and iPhoto crashes when I try to print a picture.  I did port all my programs from my old iMac.

    Before anyone can help, they need information to work with. Basic stuff:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. What were you doing when the problem arose?
    - Did it ever work properly?
    - Are there error messages?
    - What steps have you tried already to solve the issue.
    Anything else you can think of that might allow someone else to understand your issue.

  • I lost my iphone 4, but I found it using the find my iphone app on another apple device. But before I did this I erased all the data from my phone. When I try to reactivate it I am asked to unlock my sim but there is nowhere for me to enter the pin.

    I lost my Iphone 4, but I was able to find it using the find my Iphone app on another apple device. However, when I try to actiavte it, I am asked to enter a PIN to unlock my SIM. But, I don't know where to enter the PIN. Please help me. Thankyou.

    Contact your cell provider.

  • Contacts crash when I try to access old smart lists

    I have multiple smart lists in Contacts that are hold-overs from Address Book.  Whenever I try to access them (click on them in the left bar), the program crashes.  I cannot even delete them, because simply highlighting them (even using the keys to cycle down to them) causes the crash.  Is anyone else experiencing this?
    This is doubly disappointing because I hoped in Mountain Lion they would have fixed the smart list problems from Address Book.  I sought to make a list of contacts that were not in other lists, and this smart list structure never worked properly.  I had long conversations with their support people who acknowledged this was a problem that they would have to solve.  It appears they did not.
    Is there a way for me to delete smart lists that are in Contacts without actually accessing Contacts?

    I am having a similar problem, related to Contacts, not with old but with brand new Smart Groups.
    This morning, I tried to add a Smart Group using the OSX 10.8.2 Contacts app, but upon hitting OK, the program froze.
    Your suggested list of steps to remove the offending smartlist begins by exporting the contacts to a separate file. Since, at the moment, the contacts app is unable to load without freezing immediately, the option of exporting the contacts to a file is not available.
    How bout the simple solution of having a program that works?  If I create a smart group it should just work!  Not cause the freezing of the app!  OK now having said that.  Any suggestions for how to either use Smart Groups or Eliminate them (perhaps using third party apps to clean up the Smart Group mess?).
    Thanks

  • Why does the new update for Numbers app keep crashing when I try to edit old spreadsheet or build new one??

    hi there my numbers appp keeps crashing when i edit spreadsheets? I tried unistall and reinstall but this didnt fix it, i also signed into iclud and looked for blank spreadsheets as this was recommended on another site.

    hi there my numbers appp keeps crashing when i edit spreadsheets? I tried unistall and reinstall but this didnt fix it, i also signed into iclud and looked for blank spreadsheets as this was recommended on another site.

  • Elements 10 crashes when I try to convert a directory of TIFFs to JPEGs

    With this error...
    Problem signature:
      Problem Event Name:    APPCRASH
      Application Name:    PhotoshopElementsEditor.exe
      Application Version:    10.0.0.0
      Application Timestamp:    4e5e8736
      Fault Module Name:    Camera Raw.8bi
      Fault Module Version:    6.4.1.145
      Fault Module Timestamp:    4dd55682
      Exception Code:    c0000005
      Exception Offset:    001ec4b7
      OS Version:    6.1.7600.2.0.0.256.48
      Locale ID:    1033
      Additional Information 1:    0a9e
      Additional Information 2:    0a9e372d3b4ad19135b953a78882e789
      Additional Information 3:    0a9e
      Additional Information 4:    0a9e372d3b4ad19135b953a78882e789
    Read our privacy statement online:
      http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
      C:\Windows\system32\en-US\erofflps.txt

    Ah. This forum is for photoshop elements. In CS5 you have a lot more options for workarounds, and you should probably post your question in the Photoshop for Windows forum to get the best answers:
    http://forums.adobe.com/community/photoshop/photoshop_windows
    Good luck!

  • Hi, I tried installing the new software update to my iPod touch this morning, got an error message that I could not finish installing it, and now my iPod is completely unresponsive, please help? It won't respond when I plug it into iTunes or anything.

    Hi, thank you for helping me! Every time I plug it into the USB port of my computer, there is an image on my iPod touch that shows a USB cord and tells me to plug it into iTunes, but it is completely unresponsive. I have tried holding the home and power buttons simultaneously for 15 seconds, and that does not do anything either. Any ideas? Thank you so much!

    Do you remeber the exact (or close to it) wording of the error message?
    Try manually placing the iPod in Recovery mode and then try to restore
    Next try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    You can also try another computer  to help determine if you have an iPod or computer problem.

  • When I tap a photo in my iPhone photo gallery, the photo appears but there is always a "this movie format not supported" alert and then the alert goes away and the photo appears. These are photos I've taken with the iPhone and aren't even movies.

    It's very odd. I take photos with my iPhone and then later go to view the photos in the Photo Gallery on my iPhone. The photos to appear, but I keep getting "this movie format not supported" alerts, even though I am looking at photos taken by my iPhone. The alert appears briefly just after the photo appears and then the alert goes away and I can see the photo. They are just still photos and not movies. Why wouldn't the iPhone recognize the format of photos it is taking?

    That thread helped for a time.  But now it seems as though my computer is back to slow again.  But, some of the jargon is over my head as well.  Not sure I knew quoite everything they were talking about.  But thanks a lot for that, it helped I probably just need to reread it and follow the instructions again.  Thanks so much.

  • TS2634 My EarPods keep randomly turning down the volume when I'm listening to music?!?!? does anyone know how I can fix this, or will I have to invest in a new pair?

    this is so annoying! I will have my volume at the usual 6, and I'll listen to music and i won't touch anything but it turns the volume down until eventually there is no sound. this does not occur without the EarPods.

    If still in warranty return to Apple for evaluation
    Worth trying a restore of iPhone to eliminate a software issue ...and
    Do they work in other devices

  • HT1338 Imovie Crashes when I try to do image stabilization

    I Movie 11 crashes when I try to do an image stabilization. It wasn't doing that before but has started now.
    Please help

    [Have you seen this article?|http://support.apple.com/kb/TS2558]
    It suggests importing at 960x540.
    If you prefer to edit at full 1920x1080 (and why wouldn't you?), get the free app called MPEG Streamclip and convert the h.264 files from the Canon to Apple Intermediate Codec in 1920x1080 (e.g. current dimensions). This will produce a larger file because the Apple Intermediate Codec uncompresses the h.264 so that every frame is a full frame. However, you can edit in 1920x1080 with no crashes.

  • Adobe Muse CC keeps crashing when I try to open my file.

    Hi all,
    I've recently created a project off Adobe Muse, but for some reason it keeps crashing when I try to open it. I can create a new
    file in muse, but I cannot open that file. The file size is only 13MB. Here is a screen shot of what appears on my screen :

    Hi Zak,
    Sorry my knowledge in computer mechanics are very low, but this is the general information about my
    current computer. The Muse file is also stored in my documents.

  • After the latest Security Update 2012-001 (Mac OS X 10.6.8) my Adobe Photoshop CS 8, Dreamweaver 8, and InDesign CS programs crash when I try to save a file.

    After the latest Security Update 2012-001 (Mac OS X 10.6.8) my Adobe Photoshop CS 8, Dreamweaver 8, and InDesign CS programs crash when I try to save a file. HELP!!!

    Howdy,
    Apparently some are reporting that this causes the older PowerPC (PPC) applications that are supported in 10.6 via 'Rosetta' to crash upon attempting to open/save/print using any dialog box, or fail in other similar ways such as simply not printing or quitting, or freezing/hanging/crashing of the application.
    I have read of some companies that have indeed submitted proper bug reports to Apple, but that is not a guarantee of a bug-fix being issued.
    You might wish to read:
    http://www.macintouch.com/readerreports/snowleopard/index.html#d02feb2012
    If you are unsure if you are still using PowerPC apps, if the application is currently running, look under the 'Activity Monitior' (in Applications -> Utilities), or alternatively you could check in the System Profiler, Applications. Check the column "Type".
    Here is a fairly simple way you can restore you system and restore you applications functionality again, if you don't have a recent clone or good Time Machine backup that you can restore from. If you do, restore from your backup prior to having installed the Security Update 2012-001.
    Time Machine restore: http://support.apple.com/kb/ht1427
    If you are restoring a backup made by a Mac to the same Mac
    With your backup drive connected, start up your Mac from the Lion recovery partition (Command-R at startup) or Mac OS X v10.6 installation disc. Then use the "Restore From Time Machine Backup" utility. Select the backup prior to your issues, and it will be restored back to the state it was in at that time.
    If you can't easily restore from a backup, you can instead do the following:
    - You first start by reinstalling your OS X 10.6.x, this will preserve all your user data, your applications, no worries there.
    - Then install the Mac OS X 10.6.8 Update Combo v1.1 (links provided below)
    - Make sure you're printers are showing up correctly in your system preferences, if not, re-add the printers
    - Then finally, run the Apple Software Update (by pulling down the Apple Menu), and install any and all remaining updates, except do not then re-install the Security Update 2012-001. It is possible that you may have to reboot after installing some of the updates, and you may even need to run it a 2nd time to make sure that you've got all updates, except NOT the Security Update 2012-001.
    Links for 10.6.8 Update Combo v1.1:
    http://support.apple.com/kb/DL1399
    or the link to directly download this 1.09GB combo updater:
    http://support.apple.com/downloads/DL1399/en_US/MacOSXUpdCombo10.6.8.dmg
    Cheers,
    Daniel Feldman
    =======================
      MacMind
      Certified Member of the
      Apple Consultants Network
      Apple Certified (ACHDS)
      E-mail:  [email protected] 
      Phone:   1-408-454-6649
      URL : www.MacMind.com
    =======================

  • Foxfire crashes when i try to print any page from the web site

    foxfire crashes when i try to print and page ie my ncis(firearm), bank statement even if do a print page

    It would appear you have a multi-function printer with a fax.  This device would install as a Fax and as a printer  as seperate devices.  Make sure you are printing to the printer device.  What is your printer model?  What operating system?  What browser are you printing from?
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Maybe you are looking for

  • Deleting file from .jar file

    I m having trouble with the Forum search, so sorry if this question has been answered before in this forum. If I create a .jar (or an .ear) file, then open the file using Winzip and then delete a file from the zip, does it corrupt the .jar file? I ra

  • Firefox will not start on homepage. Always starts on last tab(s) open.

    This problem has persisted since version 16. Settings in options are correct. I have tried changing different options and my settings file does save the new settings. I run a current version of Norton 360 and have used a separate malware detector Mic

  • Applescript

    I am not positive this is the appropriate forum for this question, but I can find little regarding this subject. Is it possible to use applescript to creat a script in hotmail such that when one clicks on a junk mail, the script gets the address, sen

  • Question on DFSR after replication is setup

    I have looked high and low and not found an answer.  I need to add a large amount of data to one of the replicated folders.  Is it best to just move that data over to the folder and let the replication process solve it out or do I need to stop replic

  • Performance Issue with Concurrent Program

    Hi Gurus, I have a loader program which updates some information in the OM sales orders, this is been done using oe_order_pub.process_order and I do not see any performance issue in the package. Using this program i had tried to update some huge numb