10.4.6 update problems with isync and idisk, and shutting down.

I downloaded the 10.4.6 update and my Idisk no longer mounts automatically after logging in. I can make it mount if I do a search for it, and then double click on the icon. Once it does mount, it will not sync when I add new files to it.
I have repaired permissions a couple of times, but it still doesn't work. I also can't shut down until I see an error message about "mirror agent". What should I do?

This is the iPod nano forum.
Don't you need to post this in the Tiger Forum?

Similar Messages

  • Hai ian having problem with iphone 4 is suddenly shut down automatically when it is near 2 30-50%  can u plz tell soutions for that plz

    hai ian having problem with iphone 4 is suddenly shut down automatically when it is near 2 30-50%  can u plz tell soutions for that plz

    This is most often due to faulty battery. Apple Genius can perform a quick several minute battery diagnostic test. Make Genius Reservation.

  • Is anyone having problems with the facebook app - just shuts down before it even loads - frustrating!

    Is anyone having problems with the facebook app - just shuts down before it even loads - frustrating!

    Hi Robk573,
    Thanks for visiting Apple Support Communities.
    I'd suggest the steps in our iPad troubleshooting assistant:
    https://www.apple.com/support/ipad/assistant/application/
    Best,
    Jeremy

  • IOS 7.1 Update problems with text and imessage

    SInce I did the latest updates I've had problems with my text and iMessage. First I've never used iMessage in the past and always got my text messages and sent text just fine. Now it seems at though I can only have one or the other. If I have friends using iMessage and I have my iMesage turned off they wont get my message and if I have my iMessage turned on and I send to someone with and android they wont get my message either. It's like it can't figure out if it's and iMessage or a normal text. I have it set to send as SMS when iMessage is unavailbe but it doesnt sent as a text message.
    So at this point I wont be ablet to get my messages from both iMessges and SMS..
    Anyone else have this problems.

    Hello crissyanon,
    The following article provides some useful information and troubleshooting steps that can help get Messages working.
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Cheers,
    Allen

  • Problems with isync and itunse and ical

    Hello,
    i can't sync my ical Calendar with my new ipod with itunes and with isync for my Nokia.
    When I select in isync die Calendar, an Dialog shows: "Es wurde kein beschreibbarer Kalender gefunden".
    In itunes it shows: "Kein Kalender vorhanden".
    I use actualy Leopard. In ical all shows fine, in MenuCalenderClock too.
    Any Ideas?
    Regards Ulrich

    this worked for me:
    1) exporting all my calenders one by one (NOT making one backup for all calenders by "sicherungskopie")
    2) closing calendar & calendar related apps
    3) clearing the calender cache (user/library/cache/ical)
    4) deleting the calender plist (com.apple.ical.plist --> found in users/library/preferences)
    5) log out & log in
    6) creating new calenders (previous names are allowed)
    7) importing the old calenders from the export-files
    8) opening isync/ituns

  • Big Problem with new PB SD-DL (shuts down each time)

    Hello I have a big Problem with my new PB 1,67 SD-DL.
    If I use it with the Powersupply there is no problem but if want to use it without the powersupply it shut down each time!!!
    Sometimes after 5 minutes, sometimes after 3 minutes or 10 minutes... (remaining battery time 3 hours)
    If I reboot it tells me that the system clock is before 2001 and I have set the right date.
    What should I do? I have already made a PMU Reset but nothing happens.
    The PB is 3 Weeks old and I have calibrate the battery correctly.

    You state that you've already tried resetting your PMU. Perhaps you should try resetting your NVRAM & PRAM. Frankly, I think this is a long shot, but it's worth a try.

  • Iphone 4s - 7.0.4 issues remain with volume and shut downs

    I have been unsuccessful in enjoying a fully functional phone ever since upgrading to the original iOS 7 operating system.   At first it was just a volume problem where phone's volume would go from working fine to no sound back to working fine completely intermittently.  I was told to upgrade to the newest version, which I did ... from 0.2 to 0.3 and now to 0.4.  
    I continue to have the same problems.  and as of edition 0.3, my shut-down button no longer shuts down ... it only restarts, so my phone is on continuously even when I want it off.
    Are there any signs that my phone will work again as intended eventually ?????  Or are there any fixes or new settings that I don't know about that can resolve these issues?
    Terri

    Ever since iOS7.0.6. and still on iOS7.1 both me and my wife had huge battery drain on our iPhone 4S and stand-by was equal to usage time. We finally found the solution to a post of another user on the Dutch Tweakers forum. There seem to be a bug within a certain Dutch coupon app called 'Scoupy' which drained the battery completely although GPS setting was turned of and also 'refresh on background' was off.
    Scoupy said that a fix for their app is send for approval to the App Store. We removed the app and our usage/stand-by time is again as normal (higher stand-by time then usage time) and best of all a 'normal' battery use as it was the case on iOS7.0.4. I hope this could help someone. I'm wondering if the iBeacon changes in iOS7.0.6/7.1 together with a bug in the Scoupy app could be the cause? Maybe this is also with our similar apps you have on your phone.

  • Having issues with AA8 with freezing and shutting down.

    After a successful install, this app freezes upon starting at the splash screen "Getting Started with Adobe Acrobat...". After about 3 minutes it will unfreeze for about 3 secs. at which point it will shut down without an error message. During the time that it is frozen, the hard drive is pinging intermittently so I assume it is trying to do something although I'm not sure what.
    I am running it on an laptop running Windows XP with plenty of ram and HD space. Also am running without any of the startup programs loading which I believe is call the minimal configuration.
    Any ideas as to why I'm having these issues? TIA

    Actually, you should hold the C key to start up from a Mac OS X install disk. Holding the D key boots into Apple Hardware Test (assuming you've got the right disc in). If both of those things fail, resulting in identical behavior, then it's likely to be a hardware issue.

  • Software Update Problems with Internet and links xperia L

    Since the last Update my xperia L has Problems
    Google chrome can not be opend via Icon
    Google search is possible but if you want to Open any link it cannot be opend (no New window)
    Internet is only available via wifi but not with the smart phone supplier (tmobile) - resulting in no access to Internet

    Strange! Try to remove the battery from the phone for a while and then try again. You can also start your phone in safe mode to see if the problem may be related to any 3rd party apps installed in your phone:
    http://talk.sonymobile.com/t5/FAQ/How-to-boot-your-phone-into-safe-mode/m-p/348008#U348008
    Do you experience the same problem if you download another browser from Google Play?
    What are your thoughts about this forum? Let us know by doing this short survey.

  • 10.5.5 update problems with firewall and permissions

    Hello, I have a small office (4 people) with one server that has both leopard server (standard install) and filemaker server installed on it. I'm hosting our website, running ical services, file sharing and Firewall. I avoided doing any updates because everything was working well and I didn't want it to get screwed up. Well our website was hacked into so I went ahead and ran the combined update and restarted. Everything booted up fine and is working with the exception of Filemaker Server database access and webdav access to our site folder.
    The Filemaker access is a firewall issue but I'm not sure about how to proceed. In order to open the appropriate port it seems I need to use server admin (instead of server prefs) and run the firewall from there. If I allow the Filemaker server service for "Any" doesn't that leave me vulnerable from the outside? if so how would I go about allowing it only to the internal file services?
    For the webdav services when using Dreamweaver to upload files to our server I receive a permissions error not allowing me to upload any files. I have repaired permissions and still get the same error. My question is 2 part:
    Any ideas on what to do about the permissions?
    Would it be more secure to turn off webdav and create a share point ( I am local ) for the site folder with "others" read only privileges and my web designer read and write privileges?
    If I continue to use webdav should I secure the folder using realms and give "Everyone" browse only privileges and my web designer Browse and Read/wright privileges?
    Thanks in advance
    Steve

    you can pile it on this: http://discussions.apple.com/thread.jspa?threadID=1246649&tstart=0
    btw - no solution yet.

  • T420 - Installed updates - problems with OSD and UltraNav

    Hello,
    I have just reveived my T420 and installed all updates - first MS Winows 7, then Lenovo. The effect is that...
    OSD is not working (I did not find any setting that would turn it on/off)
    Ultranav middle button works like any mouse middle button - previously I used it for scroling, now it is just a normal mouse button
    I cannot use mouse settings in windows. When I try to enter them, windows asks me to unsintall Synaptic driver for some reason. Then mouse setting window appears, but it is frozen.
    Anybody had simillar problems?

    The OSD-problem appears very often the last days after running System Update.
    Install the hotkey-features manually
    If Ultranav still does problems then remove it from Control panel - Programs and functions and install it again manually.
    Driver: http://support.lenovo.com/en_US/downloads/detail.page?LegacyDocID=MIGR-66898
    Utility: http://support.lenovo.com/en_US/downloads/detail.page?LegacyDocID=MIGR-67226
    My home-forum: http://www.thinkpad-forum.de
    Wiki: Deutsches ThinkPad-Wiki English ThinkWiki
    My ThinkPad-Collection

  • IOS5 update problems with iphone and ipad

    I first tried to update my iphone 4, with zero success. All software updated on my macbook pro, then when i began to update the iphone, i got stuck on "contacting iphone activation server". I can still manage my iphone and eject it, but no update. This was yesterday and 24 hours later whenver i turn on my ituens, it still says "contacting iphone activation server". iTunes is mostly functional still, but it won't connect to the iTunes store. Next I tried my iPad (1) which successfully updated, but even though I synced from a backup to iTunes, none of my apps or data is on the iPad other than my email. Now when I plug in my iPad I cannot manually manage it. The screen in iTunes when I click my iPad is just a grey screen that says iPad. No info, or buttons to choose manual or automatic update. And the iTunes bar at the top still says "accessing iTunes store", "contacting iphone activation server" and also "genius accessing iTunes store". I get that I'm obviously not connnecting to sites, but why is my ipad not responding in iTunes? I dont think that being connected to iTunes is that important to managing your iPad since I've done it several times with no internet connection.
    Please help! I really dont want to have to email myself all of my documents that I want on my iPad, or try to sync them over my webdav.
    Cheers

    I found a bit of a work around that is working for me, strange but it works. 
    Adding the photo album sub folders 1 at a time and syncing.  Then when it completes, add another one, confirm the pics are there and continue process.  I now have over 35k photos and no gaps or empty albums but if I do more than 2 or 3 they show up empty.
    If empty, unsync them, and add 1 at a time.  

  • Update problems with catalyst and xorg-server

    /etc/pacman.conf
    [catalyst]
    Server = http://catalyst.apocalypsus.net/repo/catalyst/$arch
    $ pacman -Syu
    :: catalyst-utils: benötigt xorg-server<1.12.0
    $ pacman -Si xorg-server
    Repositorium         : extra
    Name           : xorg-server
    Version              : 1.12.0-1
    Mmmmh ...
    Ranomier

    pacman.conf
    #[...] standart stuff
    #yaourt repos
    [archlinuxfr]
    Server = http://repo.archlinux.fr/x86_64
    #catalyst repos
    [catalyst]
    Server = http://catalyst.apocalypsus.net/repo/catalyst/$arch
    #EOF
    Updating
    $ pacman -Syu
    :: Synchronizing package databases...
    core is up to date
    extra is up to date
    community is up to date
    multilib is up to date
    archlinuxfr is up to date
    catalyst is up to date
    :: Starting full system upgrade...
    resolving dependencies...
    looking for inter-conflicts...
    error: failed to prepare transaction (could not satisfy dependencies)
    :: catalyst-utils: requires xorg-server<1.12.0
    Information about the required package
    # LC_ALL=C pacman -Si xorg-server
    Repository : extra
    Name : xorg-server
    Version : 1.12.0-1
    URL : http://xorg.freedesktop.org
    Licenses : custom
    Groups : xorg
    Provides : x-server
    Depends On : libxdmcp libxfont udev libpciaccess libdrm pixman libgcrypt libxau
    xorg-server-common xf86-input-evdev
    Optional Deps : None
    Conflicts With : nvidia-utils<=290.10
    Replaces : None
    Download Size : 1273.11 KiB
    Installed Size : 3818.00 KiB
    Packager : Andreas Radke <[email protected]>
    Architecture : x86_64
    Build Date : Mon Mar 5 07:00:50 2012
    MD5 Sum : 499b6f00f70cab6f75d0cea349b69fd6
    SHA256 Sum : 0d9a4a50770912e8d90b21ffe9dbb0d83d58e60598088d55881000fccf1e87e2
    Signatures : Yes
    Description : Xorg X server
    But in the repos IS the 1.12.x package of xorg-server
    wondering, ok then i take these repos
    Last edited by Ranomier (2012-03-13 18:42:18)

  • Problem with checkbox and drop down menu

    I am using DW8 with PHP/MySQL.
    I made a insertion form and a couple of the fields are
    checkboxes and another is a drop down menu. Everything works fine,
    however, when I create an update form and the recordset calls the
    data it doesn't retain its values on those items.
    For example, if I checked a box when inserting the record and
    then call the data up for the update form, the box is not checked,
    making the user believe it was never checked in the first place.
    The same thing goes for the drop down menu. If I have 3
    options in the menu and someone selects the third one, when the
    update form is used it defaults to the first option automatically
    instead of actually calling up the original value selected.

    The fact that two scripts do not work together does not mean
    there is a bug in the RH script. It is simply that they were not
    designed by their respective developers to work together. This
    happens with multiple scripts in any html file.
    Try creating a new project and then importing just this topic
    into it. Does it still have the problem?

  • Program has encountered a problem while rendering and shuts down

    I was rendering a video, and about 23% of the way through the program encountered this program. I restarted and tried it again. It now happens in the 7th clip out of the 80 clips on the timeline or about 7% of the way. I've deleted the scratch disk files with no luck.
    Does anyone know what would cause this problem?

    Which Satellite L675? There is a label on the bottom.
    Probably easiest to restore from the hidden partition. See the section Recovering to out-of-box state (recommended recovery method), which begins on p. 62 of the User's Manual.
       Satellite L670 Series User’s Guide
    Yes, I've read here that it can take a long time to restore the factory image.
    -Jerry

Maybe you are looking for