10.5.2 Kills Boot Camp Assistant

After updating to 10.5.2, I can't run Boot Camp Assistant -- it gives an error thus:
"Boot Camp Assistant cannot be used
You must update your system software before using this setup assistant".

Go into your system preferences and click the startup disk icon then select your Mac HD.

Similar Messages

Boot Camp Assistant removing partition stalled?

I had created a FAT partition for Windows on my MBP when first setting up this new machine. I am trying to use Boot Camp Assistant now to remove the partition and it says "Partitioning Disk" with the barber pole going (though no progress shown).
It's been about two hours now and it's very hard to tell if anything is really happening. Both the Mac OS and Windows partitions are still mounted on the desktop, and the Windows partition still has all its files and folders available to browse through and copy. I can even copy files to and from the Windows drive.
So I have to imagine that it's safe to kill this Boot Camp Assistant process?

So I have to imagine that it's safe to kill this Boot Camp Assistant process?
I hope that you have a backup for the HD. Killing the process could make the HD unreadable. It is an extensive process to recover the HD involving use of another Mac.

Trying to install Windows 8.1 from an ISO, but boot camp assistant doesn't seem to recognize

Hi there,
I have a 2011 Macbook pro, 15", 2.2 GHz Intel Core i7, 8GB RAM. I'm wanting to install windows 8.1 using boot camp assistant, and downloaded windows 8.1 from dreamspark (Microsoft store for students). I have downloaded all of the windows support software onto a USB, and there is a folder sitting on my desktop containing the .ISO for windows 8.1. However, when i try to run boot camp assistant, it says that the installer disc could not be found, and does not give me an option to install from a selectable .ISO. Can anyone help me with this? Is it something obvious I'm missing? Thanks!
Connor

For Macs with built-in Optical drives, you will need to burn the ISO to Optical media and use the Optical drive.

I'm trying to install Windows XP on my Leopard 10.5.8 using Boot Camp Assistant but when it restarts it says I should insert a bootable disk even though I didn't remove the installer from the drive. What should I do?

More info: I'm using an external CD drive because the built-in one doesn't work for some reason.
Also I went back and deleted the partition (also using Boot Camp Assistant) and just gave up on installing XP, but now every time I turn on my macbook I have to press the Option key to mount the Mac HD. If I don't, it returns to the black screen that says I have to insert the bootable disk and press any key. How do I stop this problem? I've already verified the disk and permissions, plus repaired it. It's still the same.

Go into your system preferences and click the startup disk icon then select your Mac HD.

I'm trying to install Windows 7 on my MacBook with Boot Camp Assistant

I'm trying to use Boot Camp assistant to install Windows 7. I have a disk, I've done everything right, but for some reason, whenever I click Install on the final Boot Camp prompt, it only gets as far as the Windows is loading files... part after it reboots to the Windows hard drive. I've tried everything, but it still won't work. Im using a 13" MacBook Pro with Retina. It has the latest software version (OS X 10.9.1) and I have a USB with Windows Support Software. The disk is Windows 7 Home Premium 64-bit.
I've been trying for the last two days, and I really need help!
Thanks.

I solved my own problem. I just kept trying, and eventually it worked!

Boot Camp Assistant quit unexpectedly when creating partition

Dear Sir
I am using an Imac 21.5" (Late 2012) version of imac.
Thought of installing win7 to my system but i am hit with this error as Boot Camp Assistant quit unexpectedly when i clicked next after selecting the partition for windows,
Full error message is" Click Reopen to open the application again. Click Report to see more detailed information and send a report to Apple."
PLease advice.
Thanks.
Process:         Boot Camp Assistant [1101]
Path:            /Applications/Utilities/Boot Camp Assistant.app/Contents/MacOS/Boot Camp Assistant
Identifier:      com.apple.bootcampassistant
Version:         5.0.2 (462)
Build Info:      BootCampAssistant-5030000000000000~1
Code Type:       X86-64 (Native)
Parent Process: launchd [130]
User ID:         501
Date/Time:       2013-03-31 17:36:25.075 +0800
OS Version:      Mac OS X 10.8.3 (12D78)
Report Version: 10
Interval Since Last Report:          1835 sec
Crashes Since Last Report:           13
Per-App Interval Since Last Report: 607 sec
Per-App Crashes Since Last Report:   13
Anonymous UUID:                      4DB7CAAB-CFA8-6F8C-1EFB-CEF8C8FF222F
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x000000000000003c
VM Regions Near 0x3c:
-->
    __TEXT                 00000001053b4000-00000001053da000 [ 152K] r-x/rwx SM=COW /Applications/Utilities/Boot Camp Assistant.app/Contents/MacOS/Boot Camp Assistant
Application Specific Information:
Performing @selector(continueButtonClicked:) from sender NSButton 0x7fbdd9a25780

Same thing for me too. I have "downloaded the latest Windows support software from Apple" and put it on my USB stick.
Only if I try to disconnect the USB drive I get this message:
The installer disc could not be found.
Insert your Windows installer disc and wait a few seconds for the disc to be recognized.
Then if I connect the USB stick again, I get this message again:
Boot Camp Assistant quit unexpectedly.
Any tips on how to solve this would be greatly appreciated!

I have just purchased a new iMac OS Xlion version 10.7.3 and I'd like to install Windows. I have a disc for XP but the Boot Camp Assistant manual only refers to Windows 7. Please does anyone know if it will it work with XP.?

I have just purchased a new iMac OS Xlion version 10.7.3 and I'd like to install Windows. I have a disc for XP but the Boot Camp Assistant manual only refers to Windows 7. Please does anyone know if it will it work with XP.?

Get a Virtual Macine software program, Parallels, VMware Fusion or VirtualBox, and install XP in a virtual machine.
You can't install XP in a Boot Camp Partition with Lion or Mt Lion, only Win 7.

Boot Camp Assistant "Windows 7 Installer disc could not be found"

I'm attempting to Boot Camp a partition on my MacBook Pro Retina (13", early 2013) and it's not working. I purchased a Windows 7 Home Premium 64bit DVD and i'm accessing it through the optical drive on my desktop iMac. So far so good; MBP shows the disc on its desktop through remote disc sharing. The USB drive with downloaded Windows drivers is in place.
However, Boot Camp Assistant won't recognize the Windows 7 DVD, even though it's right on the desktop (remotely). There is a dialog box and it says "Installer disc could not be found .. wait a few seconds"
And that's it. Nothing further happens.
Help! I hate Windows! Why am I doing this??

Lightwave wrote:
Thank you! I bought Windows 7 on a physical DVD (it's the Home Premium 64bit disc). Hope that was the right thing to do?
Yes.
So let me get this straight. I can either use this DVD directly on a superdrive plugged in to MBP, or else burn a copy to the USB stick.
MBP will not install from an external SuperDrive due to Windows installer limitations, because it has no driver for the SuperDrive.
How exactly do I do the latter since my own DVD reader right now is by remote disc on my iMac?
Create an ISO using the following procedure on the iMac and then copy it over the network to the MBP or create an ISO by attaching the SuperDrive to the MBP. Use Bootcamp Assistant to point to this ISO when creating the USB for installation.
From Disk Utility 12.x: Duplicate a disk, CD, or DVD
Step 7 will give you an ISO, that you can then copy to the MBP.
Duplicate a CD-RW or DVD-RW
Disk Utility can’t create usable copies of discs with an incompatible format or discs that are copy-protected. (These include most commercial movie DVDs and audio CDs and some software and data discs.) To copy music from an audio CD to another CD, use iTunes, not Disk Utility.
To burn a disc, you need an optical drive in your computer or connected directly to your computer. You can’t burn a disc using a remote optical drive.
Open Disk Utility, in the Utilities folder in Launchpad.
Insert the CD or DVD disc in the optical drive, and select it in the list at the left.
Choose File > New > “Disk Image from [disc name].”
Type a name for the disk image.
Choose an option from the Image Format pop-up menu.
Choose “compressed” to create a smaller disk image.
Choose “read-only” to create a disk image that’s quicker to create and open.
Click Save.
After Disk Utility creates the disk image, eject the original CD or DVD.
Select the disk image in the list at the left, and choose Images > Burn.
When the Burn Disc dialog appears, insert a blank CD or DVD, and then click Burn.
You can continue using the disk image to create as many duplicate discs as you need.

I need help with boot camp. "Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again."

This message appears every time I try to partition my disk:
"Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again."
I verified my Macintosh HD disk on Disk utility and then tried to repair it, but I am unable to click the repair button.
It says it's not available because the startup disk is selected.
I don't know what to do or how to go about both these problems.
Please, any suggestions?

This message appears every time I try to partition my disk:
"Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again."
I verified my Macintosh HD disk on Disk utility and then tried to repair it, but I am unable to click the repair button.
It says it's not available because the startup disk is selected.
I don't know what to do or how to go about both these problems.
Please, any suggestions?

Boot camp assistant no longer registers my windows partition.

I recently decided to wipe my macbook pro (aluminum) and reinstall OS X on it. Using my leopard install disk, I erased the drive. I had a windows partition running at the time, but I decided no to erase that as well. Unfortunately it seems as thought the disk couldn't install snow leopard from scratch, so I installed tiger (my leopard disk wasn't working) and upgraded from there. This worked, and now I've got snow leopard up and running, the only issue is that boot camp assistant doesn't register my hard drive as being partitioned, so I cant remove or add partitions, though I can still boot into XP.
I want to remove and resize the partition, should I use disk utility to erase it? Or is there an alternate solution?
Thanks
-Will

Well, I just noticed the restore button at the bottom corner of boot camp assistant. Seems to have solved the problem XD.

Boot Camp Assistant 5.1.2 & 10.9.3 Broken?

Boot Camp Now Hangs Every Time & Every Which Way
My Fall 2013 installation of Windows 8 was a breeze! I’ve been running Windows 8.1 until a week ago when my internal “Windows” drive was no longer visible as a boot drive. I option-key boot into one of three internal drives:
SSD / 10.9.3
1TB HD / 10.6.8
1TB HD / Windows
Convincing myself that I must have missed something, I’ve studied and re-studied the Boot Camp Installation & Setup Guide and have read and tried the procedures described in numerous discussions and youtube videos.
Expect that this seems radical but thought it smart maintenance to back up all Windows HD data and reformat the Windows HD. I pulled my SSD (no mess with), booted into Recovery-10.9.3 and installed a clean 10.9.3.
>Put Windows installation DVD in CD drive >Shut down >reboot w/ Option+Command+p+r (reset PRAM) >Reboot 10.9.3
Mac Pro is now configured simply as:
1TB HD / 10.9.3
Windows DVD
32GB Flash
My failed installs with Boot Camp Assistant (5.1.2):
1.
Boot Camp Assistant adds a partition to 10.9.3, downloads and installs Windows support software >system auto reboots >black screen >chimes >grey screen >Windows CD spins up> then spins down >I wait for an hour+ but nothing seems to be going on and grey screen remains. (I never get to the Windows setup phase.)
reboot >launch Disk Utility >remove partition added for Boot Camp >shut down and reboot
2.
Boot Camp Assistant adds a partition to 10.9.3, downloads and installs Windows support software >system auto reboots >I option-key and 10.9.3, Recovery-10.9.3, Windows (CD), and Boot EFI (CD) options are presented >I select Windows but it immediately hangs. (Can’t boot to the Windows Installation DVD.)
reboot >launch Disk Utility >remove partition added for Boot Camp >shut down and reboot
3.
Boot Camp Assistant adds a partition to 10.9.3, downloads and installs Windows support software >system auto reboots >I option-key and 10.9.3, Recovery-10.9.3, Windows (CD), and Boot EFI (CD) options are presented >I select Boot EFI > Windows setup begins >I enter my Windows 8 key >Windows can’t find a drive for installation (even, from within Advanced option, formatting the disk during Windows setup process).
reboot >launch Disk Utility >remove partition added for Boot Camp >shut down and reboot
4.
Purchase AnyToISO for $23 to extract the ISO from my Windows 8 DVD. Easily done.
Edited the info.plist file for Boot Camp Assistant (youtube video VBAQ3CNgfxc) so that “Create a Windows 7 or later version install disk” would list as an option under Boot Camp Assistant’s "Select Tasks" window. Checked all three options. >Selected the fresh ISO file with the installation destination being my 32GB flash drive. Boot Camp downloads and installs latest Windows support software from Apple. >system reboots >black screen >chimes >grey screen >Windows CD spins up> then spins down > I wait for an hour+ but nothing seems to be going on and grey screen remains. (I never get to the Windows setup phase.)
Checking the content of the 32GB flash (now named “WININSTALL”) it contains:
          $WinPEDriver$ (folder)
          autorun.inf
          AutoUnattend.xml
          boot (folder)
          BootCamp (folder)
          Bootmgr
          bootmgr.efi
          efi (folder)
          the .iso file
          setup.exe
          sources (folder)
          support (folder)
>shut down
I option-key reboot >10.9.3, Recovery-10.9.3, EFI Boot (flash drive), Windows (CD), and EFI Boot (CD) options are presented >I select the flash drive Boot EFI >Windows setup begins >I enter my Windows 8 key >Windows can’t find a drive for installation.
The only significant hardware/software differences (between now and my initial installation of Windows) is the progression of OS updates to the current (10.9.3) and the current version of Boot Camp Assistant (5.1.2).
Other recent procedures:
-verified my HD
-repaired permissions
-reset PRAM
For most install attempts I let Boot Camp Assistant build the partition. However, I’ve also tried adding a second partition manually w/ Disk Utility to make room for Boot Camp and Windows support software.
Do I need to regress to 10.8? IF that’s what was on my Mac Pro when received Fall 2013, it worked just fine!
What a nightmare!
I’m going crazy here!
What am I missing?
Any suggestions appreciated!

I've ordered Mountain Lion 10.8 from Apple Store. (Possible that my Mac Pro was not running Mavericks when received.)
Today I downloaded the trial of ntfsmac. It adds "Windows NT Filesystem" and "Windows NT Filesystem (compressed)" to Disk Utilitie's format options. I formatted a 1TB internal HD with "Windows NT Filesystem."
Shut down Mac Pro >pulled all drives and placed the 1TB internal HD in bay 1 (Windows install DVD is in disc drive). Reboot to Windows and proceed through first pages of setup but dead end as with previous installations:
Where do you want to install Windows?
Windows can't be installed on Drive 0 partition 1
Windows can't be installed on Drive 0 partition 2
I select "Drive Options (advanced)" and format partition 2.
outcome: "Windows can't be installed on Drive 0 partition 2"

Boot camp assistant: Can't install the software because it is not currently available from the Software Update server.

Error: Boot camp assistant: Can't install the software because it is not currently available from the Software Update server.
OS 10.9.1
iMac 27-inch, Late 2009
Boot Camp Assistant Version 5.1.0 (473)
Every time I run this I get the above error after I hit "Continue" on the "Save Windows Support Software" page and subsequently hit "Download Windows 7 Support Software."
How do I successfully install 64 bit WIndows 7 on my iMac?
Thank you!

Waited a month and tried again with the same result. What gives? Does Apple no longer support Bootcamp with Windows 7? Do they not read these posts and help out customers? If Apple doesn't care and won't help, can anyone else suggest something? My large company does not like Apple and barely supports those of us who buck the trend and buy Macs. If I have to buy a PC to support their software to work from home this only gives them more "ammunition" to decline to support Macs. Any advice anyone can give would be greatly appreciated!

OS Mavericks - Boot Camp Assistant can not download windows support software because it is "not currently available from the Software Update server."

When trying in install windows 7 on my mac, the Boot Camp Assistant attempts to fownload windows support software. However, the program continues to return the following error: the windows support software "not currently available from the Software Update server."
Is there another way to get this software?

64 bit. I found the support drivers and got the windows installation done. When trying to run the 64 bit support drivers in Windows 7, it says my computer doesn't support 64 bit. Sooooo.....
I'm assuming I have to download the 32 bit support drivers for Windows 7.
Correct?

Windows 7 install via boot camp assistant fails

I have a iMac 2.8 Ghz Intel Core 2 Duo with Mac OS X Version 10.6.8.
I also have a USB drive formated as Master Boot Record in MS-DOS (FAT) format. The USB has a capacity of 4GB+ and for now only includes a file named 'unattend.xml' and a folder named 'drivers'. I created this USB drive when advised by a Boot Camp support site, because the Windows 7 install created a blank screen with a small flashing line on the upper-left of the screen.
The I have burned an ISO file of Windows 7 Pro English 32 bit from the Microsoft site (I'm Gold partner).
So I started of by clicking on the Boot Camp Assistant, tried to download the nesecarry Windows drivers, but it refused... This seemed to be a normal problem which I could ignore (I heard). So I selected 'I have the Max OS X Installation Disc....' and pressed continue. I now prepared the size of the Windows environment and when that was finished, I inserted the burned DVD (which works perfectly fine on non-Apple computers).
All this time, the USB drive was in the back of the iMac.
I waited a while and the computer rebooted. A white screen appeared and after a while, the screen went to black, with the flashing little line on the upper-left of the screen...
What is it that I do wrong? Any help is really appreaciated.

Partitions are not drives
you are just seeing user volumes
your sig showed you still run 10.6, not Lion, no recovery partition (which is hidden)
The update to lion puts the recovery partition between where Mac and Boot Camp use to be and would have been.
I am opposed to upgrading to Lion. Do clean install, even to an external drive.
To me all that is needed is in the manual and here
http://www.apple.com/support/bootcamp

Installing Windows 7 Professional via Boot Camp Assistant on late 2013 iMac 27"

So here I am with a brand new 27" iMac bought on Nov 3. Machine is top of the line w/ 3.5GHz quad-core intel i7Core, 4GB Video Card, 3TB Fusion Drive and right out the box on first start up and first update, I install Windows 7 via Boot Camp. Best install of all time, right on through no problems whatsoever and I'm thinking - Problems? what problems! HA! ... well a week later Windows 7 crashes from my own bone-headed mistakes and i go to reinstall windows thinking oh i'll be down for maybe 2 hrs? but it'll fix my problem. No way.. 1 week and an exchange-for-another-identical-imac-from-store later plus $300+ dollars in tech services Here I am with no resolution to this problem of installing Windows 7 via boot camp. I just absoultely couldn't get past the stinkin' step of "Setup was unable to create a new system partition or locate an existing partition... yadda yadda yadda"
UNTIL NOW - 9:07AM on 11/19/13 I have SOLVED the problem. Read from here down to get my instructions (with Pictures of course!!)
Before you even start this is VERY IMPORTANT. Things will go to all **** if you don't.
USB ports. On the back of my iMac, there are 4 of them. From Left to Right (you have to acknowledge this or things will never work), place your Super Drive (CD/DVD Drive) in the Left slot. Next, place your USB Mouse in the 2nd from Left slot. Finally, place your USB/Flash Drive in the 3rd Slot (it will be 2nd from the Right). See Fig1.
FIG.1
Now you go to Boot Camp Assistant, start it up, and check off the SECOND option:
"Download the latest Windows software from Apple". See Fig2.
FIG 2
Let the download do its thing and when its done, Boot Camp will advance to the partitioning screen. Allocate the space you want for the Windows 7 Partition and hit "Install".
CRUCIAL: Immediately after hitting "Install", Boot Camp will pop up a message stating that the USB/Flash drive currently inserted providing Windows Software drivers brings a functionality issue and Boot Camp will disable the drive to continue. This has to happen in order to avoid the dreaded "A new setup partition or existing partition cannot be located" message that comes during the Windows 7 Install when picking your partition. I am convinced that this pop up only occurs when you have your DVD drive, Mouse, and USB/Flash drives inserted into their appropriate slots.
After you accept Boot Camp's disabling of the USB drive, install is pretty standard there on out. Boot Camp will create the partition, the computer will reboot and begin its Windows 7 install via your CD/DVD drive. Also want to note that I used a wireless keyboard during the entrie intallation process. I had a wired keyboard installed in my numerous attempt this past week b/c I had read in so many forums a wired keyboard was better for this install - well NOT IN THIS CASE. In fact the added USB ports that come with the wired keyboard only confused things for me even further.
I am happy to say that Windows 7 has installed successfully on my iMac, and I've reached its appropriate updates as well. Now onto 3DS Max 2014 install.

You can't do what you want with GUI utilities, which will only allow a total of 4 partitions due to the limitation of MBR needed to support Windows. Those four partitions: EFI System (hidden), Mac OS, Recovery HD (hidden), Windows. So with Lion, you only get two visible partitions if you're going to use Windows with BootCamp. You can't make anymore with the included graphical tools.
If you need more partitions you'll need to use something like GPT fdisk (gdisk) to create the partitions in the GPT first. Then add the Windows partition only to the MBR and flag it as bootable. gdisk can be googled and downloaded for Mac OS X off sourceforge. It is not a GUI tool.
You should read this:
http://www.rodsbooks.com/gdisk/
And this:
http://www.rodsbooks.com/gdisk/hybrid.html

10.5.2 Kills Boot Camp Assistant

Similar Messages

Maybe you are looking for