10.6.4 iCal Server recently stopped updating 10.5 iCal clients

Mac mini OS X Server 10.6.4, iCal server has wiki groups with multiple calendars.
Recently our 10.5.8 clients stopped reading/writing events to our 10.6 iCal server. Only the first calendar (the original auto-created when the group was created) is updated, the remaining calendars show 0 events. FWIW: the client's .caldav folder doesn't show the ETag Cache.plist for the calendars that don't show up.
This error is in the server log:
[twistedcaldav.method.propfind#error] Error reading property ('DAV:', 'current-user-privilege-set') for resource /calendars/_uids_/wiki-.../: <StatusResponse 401 Access denied while reading property {DAV:}current-user-privilege-set.>
I created new accounts on a 10.6 and a 10.5 client, the 10.6 is OK, the 10.5 has the same issues as our existing clients (which started having the issue at the same time).
Can this have anything to do with the principal.py issue when we lost group calendars? I still have the modified principal.py installed & updates haven't changed it.

No solution, gave the 10.5 user an Intel Mac running Snow Leopard.

Similar Messages

  • I have subscribed to several podcasts, but they have recently stopped updating when I try and refresh them.  How do i fix this?

    Updating Podcasts

    Well, in the end I contacted Apple and it was rather hit and miss but the problem was solved by deleteing the com.apple.mail.savedState file.  It took them a bit of time to sort it out and I had to be promoted up the chain of support but it worked.  Hope this is of use to others with the same problem,

  • Can I use Lion server to push updates to my mac clients

    Hi Everyone,
    I was wondering if I can run Lion server and use my clients (OS X ranging from 10.5 to 10.7) to pull updates from this server instead from Apple. Is it easy to setup Mac Update server?
    Thanks,

    There is a simple way for unmanaged clients.
    To point an unmanaged client to your update server, enter the following command in terminal:
    sudo defaults write /Library/Preferences/com.apple.SoftwareUpdate CatalogURL http://<your_server>:8088/index-lion-snowleopard-leopard.merged-1.sucatalog
    (replace <your_server> with the dns name of your update server.  If the unmanaged client runs snowleopard or leopard, adjust the url accordingly. For snowleopard clients, remove the "lion-" part. For leopard clients, remove the "lion-snowleopard-" part

  • Windows server 2012 stops accepting simple remote desktop clients

    Hi, I have a Standard Windows 2012 Standalone server as host for several Virtual machines ( f.e. AD and Exchange)because I do not use a keybord ar mouse for that server I always use simple RD to maintain that host.
    Since sunday I cannot connect anymore. I checked Rd configuration, network and Client ( W7). Nothing to find why.
    Se below the result of checking the host:
    Windows PowerShell
    Copyright (C) 2012 Microsoft Corporation. All rights reserved.
    PS C:\Users\Administrator> get-ItemProperty -Path 'HKLM:\System\CurrentControlSet\Control\Terminal Server'-name "fDenyT
    Connections"
    fDenyTSConnections : 0
    PSPath             : Microsoft.PowerShell.Core\Registry::HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Terminal S
                         erver
    PSParentPath       : Microsoft.PowerShell.Core\Registry::HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control
    PSChildName        : Terminal Server
    PSDrive            : HKLM
    PSProvider         : Microsoft.PowerShell.Core\Registry
    PS C:\Users\Administrator> get-ItemProperty -Path 'HKLM:\System\CurrentControlSet\Control\Terminal Server\WinStations\R
    P-Tcp' -name "UserAuthentication"
    UserAuthentication : 0
    PSPath             : Microsoft.PowerShell.Core\Registry::HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Terminal S
                         erver\WinStations\RDP-Tcp
    PSParentPath       : Microsoft.PowerShell.Core\Registry::HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Terminal S
                         erver\WinStations
    PSChildName        : RDP-Tcp
    PSDrive            : HKLM
    PSProvider         : Microsoft.PowerShell.Core\Registry
    PS C:\Users\Administrator> get-netfirewallrule -DisplayGroup "Remote Desktop" | format-table Name, Enabled -autosize
    Name                          Enabled
    RemoteDesktop-UserMode-In-TCP    True
    RemoteDesktop-UserMode-In-UDP    True
    So everything seems to be correct.
    I do not have installed Remote desktop server/services etc. because ther is no need to.
    I did not change anything on the host, no updates etc short before the problem occurred. Even not on the clients
    Where to look to find the solution. On internet I could not find it, only that what I already checked.

    Hi,
    Thanks for your comment. Sorry for late response.
    How many users you are trying to remote desktop at a time?
    I am asking here because from your troubleshooting you have done all your steps but seems you are moving out for more session connection and that’s why you can’t connect.
    Because by default server only provide 2 remote session at a time and that is also for administration purpose. So if you are trying to get more than 2 remote session for your server then you need to install RD Licensing server, activate the server, purchase
    RDS CAL (per user or per Device) as per your requirement and then configure them. After this you can get more connection.
    Please clarify and review this point 1 under this KB 2477176 article (only for reference).
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    TechNet Community Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • HP Mediasmart Server EX490 stopped booting; health light blinks blue forever

    My server recently stopped responding on the network.  I power-cycled it to reboot, but it never came back up.  The network conection light goes solid blue (and the server shows up in the router's list of clients), but the health indicator continues to blink blue indefinitely (as long as 36 hours at one point) and I can't view any files or remote desktop in.
    This has continued through a variety of reboots.  I attempted to use System Recovery to restore the system, but was never able to get the server to enter recovery mode (health indicator turning violet).  I tried using recovery anyway just in case (both with a direct ethernet connection and over the network), but it always failed on step 3.
    I wondered if the boot disk had died, but I removed it and hooked it up to another computer and was able to successfully view files, so it's at least not totally dead.
    I'd appreciate any further suggestions on things I could try to get it back up and running.

    I have the same problem ..... Will not boot up, two 1t drives, I removed the drives tested to see if data was on.. yes... has dat.   System will not boot to get it. I can not reinstall software either. HELP !

  • Coldfusion 64 bit windows installer stops working after recent microsoft update

    Coldfusion 64 bit windows installation stops working after recent microsoft updates and how I worked around it.
    My question is at the end.
    Trying to deploy coldfusion 9 enterprise 64 bit trial  version onto a Windows 2003 64 bit datacenter OS with all OS updates from MS (as of 4-7-2011).
    Steps taken (remember, this is all 64 bit):
    1. Installed the base OS which was slipstreamed with SP2.
    2. Checked w/ microsoft and installed 63 OS updates.
    3. Launch the CF9 trial exe.
    4. As soon as the first screen finishes (the one that looks like  it is extracting files) then the second screen pops up (the one that  simply says CF Adobe Coldfusion 9) and the progress bar quickly moves  95% to the right and the install application quits. No error, no nothing. No log file either.
    5. After a moment of incredulous silence (and retrying/rebooting,  etc), I started to google it. I found nothing. However, I did find a  post (thanks dspent!) that was helpful in that it told how he was able  to get at a log file of sorts, by pre-extracting the  coldfusion_9_WWE_win64.exe file and launching the adobe_cf.exe by hand.  (Dspent's install snafu was different than mine, but his post was very  valuable and got me started in the right direction.)
    6. Got a copy of rarunzipper and extracted the coldfusion_9_WWE_win64.exe file.
    7. From the windows directory created by step 6, I launched adobe_cf.exe.
    8. Same thing (the install application quits. No error, no nothing. No log file either.).
    9. I examine the hs_err_pidxxxx.log file (where the xxxx is a number).
    10. I see inside that file an ominous message: "A fatal error has been detected by the Java Runtime" then "Problematic frame ntdll.dll" and then "The crash happened outside the Java Virtual Machine in native code".
    11. OK, so now I am thinking ntdll.dll !! Native code !! It is like Java is telling me that for some reason it can't dance with the OS.
    12. On a hunch, I decided to test a CF install again on a server with just the base install of W3K3 64 SP2 (ie: skipping step 2 above this time).
    13. Bingo! That install works.
    14. Therefore, one of the 63 patches I had downloaded from MS had triggered a problem with the CF installer.
    15. Back on the first server (the one with the MS security  patches installed and the one that CF won't install on). In the CF file  adobe_cf.lax (one of the files extracted in step 6) there is a line that  mentions where the install gets it's java. Find that file, and check java version installer is using. It is using 1.6.0_14-b08.
    16. Off to the Java website, and there is a newer version of java (1.6.0_24-b07). Downloaded and installed it.
    17. Modify a line in adobe_cf.lax :
       before
         lax.nl.current.vm=resource\\jre\\bin\\java.exe
       after
         lax.nl.current.vm=C:\\program files\\java\\jre6\\bin\\java.exe
    (that assumes that you let step 16 install to the default location)
    Save the file.
    18. Run the install ... ** IT WORKS ** !
    Obviously, the built in java provided with the CF installer is  no longer compatible with some change introduced by some recent MS  update on the W2K3 64b SP2 platform.
    And now the interesting part. Although I forced the installer to used the new java, it did not incorporate it into the cf build (ie: in jvm.config, you still see c:/coldfusion9/runtime/jre AND the  version of java.exe that is in that directory is the original version,  not the newer version I forced the installer to use).
    On the surface, CF seems to run OK, but I have not done any application testing yet.
    And finally my
    ** QUESTION **
    Would it be appropriate to simply point the java.home var to the new java directory? I see that the directory structures and files are not exactly the same  (close though) so I certainly don't want to break things by doing this,  but instinct tells me that if the installer broke using the older  version, then something else is gonna break down the road if I don't use  the new version. On the other hand, the differences in the  directories and files is enough that it makes me very nervous, with my  limitied java skill set, to make this decision. 
    Thanks in advance!!
    Byron

    Hi Byron,
    Wow great post no doubt much of the information will be useful for those on Win03 SP2 +. Have to say not come across similar problem on Win08 r2 SP1 +.
    So to your question. Adobe security bulletin (http://kb2.adobe.com/cps/894/cpsid_89440.html) recommends running CF8 and CF9 with JVM 1.6.0_24. The bulletin does not say how to do that. I take you installed JDK and not just JRE 1.6.0_24? Post install of JDK follow these steps:
    Stop CF - SERVICES.msc stop "ColdFusion 9 Application Server".
    Take a copy of CF\runtime\bin\jvm.config - so you got a backup.
    Edit CF\runtime\bin\jvm.config find line "java.home=" and comment it out eg:
    #java.home=C:/ColdFusion9/runtime/jre
    Add new line like so and save jvm.config:
    java.home=C:/Program Files/Java/jdk1.6.0_24/jre
    Note  there the slashes and the location of the JRE (runtime) - you need to  point to the one in JDK because the other JRE in C:\Program  Files\Java\jre6 will be missing a DLL.
    Start CF via SERVICES.msc.
    HTH, Carl.

  • ITunes stops updating podcasts / iTunes has stopped updating this podcast because you have not listened to any episodes recently. Would you like to resume updating this podcast?

    Hi,
    My iTunes is set to automatically update podcasts and keep the last five episodes of each podcast.
    However, iTunes appears to stop updating podcasts after several (five?) unwatched episodes and gives me an exclamation mark in the podcast overview. Clicking on that, I get the message: "iTunes has stopped updating this podcast because you have not listened to any episodes recently. Would you like to resume updating this podcast?"
    This is not what I intend... and not  what I  told iTunes to do... (at least this my reading of the below settings)
    This stopping is rather less then ideal: (1) if I am going away for two weeks, which I often do, I would still like to have the last five days of news, not the last five days of news back from the date I left, (2) I need to click update for approx. 20 podcast on regular basis, (3) my iPhone is synced to iTunes as soon as I come home, if iTunes does not have the podcasts downloaded, they are not copied over to the iPhone, and the iPhone will attempt to download the episodes via 3G next time I play the podcast on the go, (4) I am mainly using iTunes functions, such as smart playlists and podcasts, through another app (Plex, a fullscreen media player) and it is a pain to have to go to iTunes to manually do things. That is why this bothering me...
    How can I get iTunes to behave as intended? (From reading through old posts I know that there is a Doug script adressing this problem, which I have just set up, but I would prefer to use internal settings if possible... maybe I am just missing a setting)
    Thank you for your ideas!

    Thank you for the response, Roger!
    OK, that's how it is then.
    The iTunes podcasts settings should be reworded in that case because it suggest something different from what it does. And, of course, it would be ideal for Apple to make this more flexible and allow users to set up their podcast downloads in their way and not be so motherly (c'mon, Apple, your users are not as dumb as you think, and they have uncapped Internet connections these days anyway)...
    Btw., for anyone interested, this is external script I am using now:
    http://dougscripts.com/itunes/scripts/ss.php?sp=updateexpiredpodcasts
    Including the "cron job" setup here:
    http://dougscripts.com/itunes/2011/12/updated-update-expired-podcasts-v2-2-and-l aunchd-project/
    Cannot tell how well it works because I have just set it up, other members of the forum say it works for them...
    If anyone knows of in-app solutions, please share...

  • My itunes stops working after I try to sync it, I recently just updated my itunes to 10.4 and my ipod touch 4g to 4.3.4

    My itunes stops working after I try to sync it, I recently just updated my itunes to 10.4 and my ipod touch 4g to 4.3.4

    iPhone 4, same thing. It gets stuck at Step 1: backing up

  • Iphoto has recently stopped working; it continually shows the loading circle. I’ve uninstalled and reinstalled it, updated it

    Iphoto has recently stopped working; it continually shows the loading circle. I’ve uninstalled and reinstalled it,updated it and reinstalled all my apps with the ‘applications install DVD’ however it still does not work. I have also tried holding the command and option key while pressing iphoto then when the pop up appears i press the checkboxes that have been suggested by other users however nothing happens. Any other suggestions would be great!

    Ok the program itself is likely fine, it's the files it depends on that are not.
    Step #1
    1: Open your Users/Library/Preferences folder (if on Lion you need to use the Go in Finder)
    2: Scroll down until you see a file called
    com.apple.iPhoto.plist
    3: Trash it and reboot, start iPhoto and see if it works.
    Step #2
    1: Go to your Users/Pictures/iPhoto Library and right (or hold option) click on it and "show package contents"
    2: Inside will be a folder with your originals, copy them out.
    3: Move and rename the iPhotoLibrary file outside of the Pictures folder.
    4: Reboot and restart iPhoto, check inside the Pictures folder if iPhotoLibrary was created.
    5: Download ClamXav and run a scan on the Original photo's and your whole machine too while your at it.
    (it's if there is a picture in there from Windows it could contain a corruption caused by malware)
    6: Reimport the originals back into iPhoto.
    See if those two steps resolve your issue, if not I could suspect next a network issue? Like iPhoto is trying to contact the internet and can't or gets hung?
    You can can create another user, use the Shared Drop box to transfer files and log into the other user and see if it's a issue with just your User account, and if so you might just want to transisition over and then one day delete the old user and it's problems.
    Please keep your Flash updated.
    http://flashbuilder.eu/flash-player-version.html
    Read my backup and restore etc., info here
    https://discussions.apple.com/message/16276201#16276201

  • HT201493 Find my friends stopped working right after recent iOS update, anyone have a fix?

    Find my friends stopped working right after recent iOS update,  anyone know of a fix for this?

    Appreciate that, but it's not as useful now.  Many users have the same issue, also see
    https://discussions.apple.com/message/23105624#23105624

  • Recent Apple update has given me a blank iCal, & won't allow to import data

    Hi,
    I've done a recent Apple update and my iCal is basically stuffed. I can't import anything to it, it won't give me an opportunity to create new Calendars, it won't sync with my Mobile me (which is connected to my macbook, iPhone and iPod). The information is still there, as it is still coming up on my iPhone and macbook, but it won't allow me to enter any new information on either my macbook, iPhone or through Mobile Me without syncing it to the other hardware. I've tried everything. I have spoken to an Apple person, but they got so far and nothing was achieved. My case number is 133721150. Please help as my life is busy enough without this complication.
    Thanks,
    Soozjl

    Fixed by 10.5.3!

  • POP3 server emails stopped after new update of 503

    Last week messge appeared on screen that new update version (14.0.4) available for your mobile Asha 503. I select yes to upgrade my phone from older version to new. after upgrade procedur my office POP3 server email stopped & not working from that time. i contact to my office network administrator to check any possibility to enable my email but he asked me there is no any chance to receive my email because he tried lot of time to re configure but it vain. please help

    The easiest way to track this is: Capture the network traffic! This can be done via a:
    A) Wi-Fi access point which allows capturing. Alternatively, you go for a
    B) Ethernet Switch behind the Wi-Fi access-point which allows port mirroring. A third alternative is to
    C) install Connectify on a computer and use that as capturing Wi-Fi access-point
    for your Nokia Asha 503.
    In all cases, you use tools like Wireshark to analyze the data traffic. However, because you are in contact with your administrator already: Does he see any data packet from your Nokia Asha 503 at all? If not, the Internet configuration could have been damaged while updating. Nokia Xpress browser is using a slightly different configuration, therefore it might not be affected.

  • HT2404 My iphone 3gs recently stopped allowing me to use certain apps and refuses downloads of other apps, saying all require ios 5. No software update button appears in settings.Can I update/upgrade my 3gs to ios 5?

    My iphone 3gs recently stopped allowing me to use certain apps and refuses downloads of other apps, saying all require ios 5. No software update button appears in settings.Can I update/upgrade my 3gs to ios 5?

    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPhone to the computer, open iTunes. Then select the iPhone under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • DNS stopped updating

    NW 6.5.8
    dhcpsrvr Version 3.14 30 October 2008
    Noticed recently that DNS stopped updating
    Local client get the IP correcty, but the info is not writen/updated in DNS
    DNS Zone is setup for Dynamic Update (and that was working for years)
    Any ideas?
    Thanks
    Seb

    I had this setup years ago, as to when I noticed few week(s) back the
    updates were happening with no problems
    Checking log I get:
    DHCP & DNS are on separate servers, both have RW replicas, communicating
    just fine
    1 zone, 1 subnet, 1 pool, flat network
    Get type:4, IPAddr:0.0.0.0, LeaseTime:0, MacIndx:29277, pIP:6DEB0180
    Using existing IP with subnet A000000
    SubmitJob called with addr=10.0.5.32, leaseExpiration=0,
    lease=5184000, operation=2
    DetermineLeaseTime: proposed=0, return=5184000,
    pSubnet->leaseTime=5184000
    AMAGet() exit err:0, subnet:10.0.0.0, addr:10.0.5.32
    2011/01/21 08:31:32 <DHCPDISCOVER> packet received from client
    <0:21:70:A4:14:D7>.
    Sending reply as a subnet broadcast.
    2011/01/21 08:31:32 Sending BOOTP/DHCP reply <DHCPOFFER> to
    <0:21:70:A4:14:D7> as <255.255.255.255>.
    ProcessJob pass IP DN: 10_0_5_32.SPGS_10_Subnet., hostname
    SPGS-D630-11-, operation 2
    ProcessDNSUpdate entered, operation DELETE
    ProcessDNSUpdate, domain name:SPGS-D630-11-.spgs.org
    SendWakeupMsg: sent 10 characters.
    Got the signal pattern.
    InitiateDNSUpdate: writemsg() called with len=5A
    AddZoneRecord: dnsLogInfo.LastZonePosition = FFFFFFFF, err=0
    InitiateDNSUpdate: writemsg() failed, wrote to file
    Seb
    "joharmon" <[email protected]> wrote in message
    news:[email protected]..
    >
    > I think a little more info is needed. Are you logs reporting the
    > updates as even being attempted and failing? or do you not even see DHCP
    > sending the updates over to DNS? Are you allowing updates under the
    > zone's control lists? Primary server the same for the forward and
    > reverse zones? etc . . . It could be a dozen different things based on
    > the info provided.
    >
    >
    > --
    > joharmon
    > ------------------------------------------------------------------------
    > joharmon's Profile: http://forums.novell.com/member.php?userid=15424
    > View this thread: http://forums.novell.com/showthread.php?t=430439
    >

  • IChat server suddenly stopped, now will not restart

    I have a Snow Leopard Server hosting multiple email accounts and websites, file sharing, runing OD, running iCal server, and up until a few days ago running iChat server.  All other functions continue to work normally, but iChat Server simply stopped one day and now won't restart.  Around the same time my external Time Machine hard drive failed (ironic) and I restarted the server in an attempt investigate that failed drive.  About the time of that restart, iChat server stopped working.  Here is the most recent iChat Service Log from attempting to start iChat Server:
    ealm=xserve.server.#####, registration disabled
    Jan 21 08:48:29 xserve jabberd/c2s[63181]: [jupeman.com] configured; realm=#######.com, registration disabled
    Jan 21 08:48:29 xserve jabberd/c2s[63181]: attempting connection to router at 127.0.0.1, port=5347
    Jan 21 08:48:29 xserve jabberd/c2s[63181]: shutting down
    Jan 21 08:48:29 xserve jabberd/resolver[63177]: shutting down
    Jan 21 08:48:29 xserve jabberd/s2s[63184]: attempting connection to router at 127.0.0.1, port=5347
    Jan 21 08:48:29 xserve jabberd/s2s[63184]: shutting down
    Jan 21 08:48:29 xserve jabberd/s2s[63184]: connection to router closed
    Jan 21 08:48:38 xserve org.jabber.jabberd[63176]: ERROR: sm died.  Shutting down server.
    Jan 21 08:48:38 xserve com.apple.launchd[1] (org.jabber.jabberd): Throttling respawn: Will start in 1 seconds
    Jan 21 08:48:39 xserve jabberd/sm[63198]: starting up
    Jan 21 08:48:39 xserve jabberd/sm[63198]: id: xserve.server.#####
    Jan 21 08:48:39 xserve jabberd/sm[63198]: sqlite: can't open database
    Jan 21 08:48:39 xserve jabberd/c2s[63201]: starting up
    Jan 21 08:48:39 xserve jabberd/sm[63198]: initialisation of storage driver 'sqlite' failed
    Jan 21 08:48:39 xserve jabberd/sm[63198]: failed to initialise one or more storage drivers, aborting
    Jan 21 08:48:39 xserve jabberd/c2s[63201]: modules search path: /var/jabberd/modules/jabberd2
    Jan 21 08:48:39 xserve jabberd/c2s[63201]: initialized auth module 'sqlite'
    Jan 21 08:48:39 xserve jabberd/sm[63199]: starting up
    Jan 21 08:48:39 xserve jabberd/router[63200]: starting up
    Jan 21 08:48:39 xserve jabberd/resolver[63197]: starting up
    Jan 21 08:48:39 xserve jabberd/sm[63199]: id: #######.com
    Jan 21 08:48:39 xserve jabberd/s2s[63203]: starting up (interval=60, queue=60, keepalive=0, idle=86400)
    Jan 21 08:48:39 xserve jabberd/router[63200]: loaded user table (1 users)
    Jan 21 08:48:39 xserve jabberd/router[63200]: loaded filters (7 rules)
    Jan 21 08:48:39 xserve jabberd/sm[63199]: sqlite: can't open database
    Jan 21 08:48:39 xserve jabberd/sm[63199]: initialisation of storage driver 'sqlite' failed
    Jan 21 08:48:39 xserve jabberd/sm[63199]: failed to initialise one or more storage drivers, aborting
    Jan 21 08:48:39 xserve jabberd/c2s[63201]: [xserve.server.#####] configured; realm=xserve.server.#####, registration disabled
    Jan 21 08:48:39 xserve jabberd/c2s[63201]: [#######.com] configured; realm=#######.com, registration disabled
    Jan 21 08:48:39 xserve jabberd/resolver[63197]: attempting connection to router at 127.0.0.1, port=5347
    Jan 21 08:48:39 xserve jabberd/router[63200]: [127.0.0.1, port=5347] listening for incoming connections
    Jan 21 08:48:39 xserve jabberd/router[63200]: [127.0.0.1, port=55886] connect
    Jan 21 08:48:39 xserve jabberd/c2s[63201]: attempting connection to router at 127.0.0.1, port=5347
    Jan 21 08:48:39 xserve jabberd/resolver[63197]: shutting down
    Jan 21 08:48:39 xserve jabberd/c2s[63201]: shutting down
    Jan 21 08:48:39 xserve jabberd/router[63200]: [127.0.0.1, port=55887] connect
    Jan 21 08:48:39 xserve jabberd/router[63200]: shutting down
    Jan 21 08:48:39 xserve jabberd/s2s[63203]: attempting connection to router at 127.0.0.1, port=5347
    Jan 21 08:48:39 xserve jabberd/s2s[63203]: shutting down
    Jan 21 08:48:39 xserve jabberd/s2s[63203]: connection to router closed
    Jan 21 08:49:09 xserve org.jabber.jabberd[63196]: ERROR: sm died.  Shutting down server.
    Jan 21 08:49:09 xserve jabberd/sm[63236]: starting up
    Jan 21 08:49:09 xserve jabberd/c2s[63239]: starting up
    Jan 21 08:49:09 xserve jabberd/resolver[63235]: starting up
    Jan 21 08:49:09 xserve jabberd/s2s[63241]: starting up (interval=60, queue=60, keepalive=0, idle=86400)
    Jan 21 08:49:09 xserve jabberd/sm[63237]: starting up
    Jan 21 08:49:09 xserve jabberd/router[63238]: starting up
    Jan 21 08:49:09 xserve jabberd/sm[63236]: id: xserve.server.#####
    Jan 21 08:49:09 xserve jabberd/c2s[63239]: modules search path: /var/jabberd/modules/jabberd2
    Jan 21 08:49:09 xserve jabberd/sm[63236]: sqlite: can't open database
    Jan 21 08:49:09 xserve jabberd/c2s[63239]: initialized auth module 'sqlite'
    Jan 21 08:49:09 xserve jabberd/sm[63236]: initialisation of storage driver 'sqlite' failed
    Jan 21 08:49:09 xserve jabberd/sm[63236]: failed to initialise one or more storage drivers, aborting
    Jan 21 08:49:09 xserve jabberd/router[63238]: loaded user table (1 users)
    Jan 21 08:49:09 xserve jabberd/router[63238]: loaded filters (7 rules)
    Jan 21 08:49:09 xserve jabberd/sm[63237]: id: #######.com
    Jan 21 08:49:09 xserve jabberd/sm[63237]: sqlite: can't open database
    Jan 21 08:49:09 xserve jabberd/sm[63237]: initialisation of storage driver 'sqlite' failed
    Jan 21 08:49:09 xserve jabberd/sm[63237]: failed to initialise one or more storage drivers, aborting
    Jan 21 08:49:09 xserve jabberd/resolver[63235]: attempting connection to router at 127.0.0.1, port=5347
    Jan 21 08:49:09 xserve jabberd/resolver[63235]: [4] [router] write error: Broken pipe (32)
    Jan 21 08:49:09 xserve jabberd/resolver[63235]: connection to router closed
    Jan 21 08:49:09 xserve jabberd/resolver[63235]: attempting reconnect (3 left)
    Jan 21 08:49:09 xserve jabberd/c2s[63239]: [xserve.server.#####] configured; realm=xserve.server.#####, registration disabled
    Jan 21 08:49:09 xserve jabberd/c2s[63239]: [#######.com] configured; realm=#######.com, registration disabled
    Jan 21 08:49:09 xserve jabberd/c2s[63239]: attempting connection to router at 127.0.0.1, port=5347
    Jan 21 08:49:09 xserve jabberd/router[63238]: [127.0.0.1, port=5347] listening for incoming connections
    Jan 21 08:49:09 xserve jabberd/c2s[63239]: shutting down
    Jan 21 08:49:09 xserve jabberd/router[63238]: shutting down
    Jan 21 08:49:09 xserve jabberd/s2s[63241]: attempting connection to router at 127.0.0.1, port=5347
    Jan 21 08:49:09 xserve jabberd/s2s[63241]: shutting down
    Jan 21 08:49:09 xserve jabberd/s2s[63241]: connection to router closed
    Jan 21 08:49:11 xserve jabberd/resolver[63235]: attempting connection to router at 127.0.0.1, port=5347
    Jan 21 08:49:11 xserve jabberd/resolver[63235]: shutting down
    Jan 21 08:49:18 xserve org.jabber.jabberd[63234]: ERROR: sm died.  Shutting down server.
    Jan 21 08:49:18 xserve com.apple.launchd[1] (org.jabber.jabberd): Throttling respawn: Will start in 1 seconds
    Jan 21 08:49:19 xserve jabberd/resolver[63255]: starting up
    Jan 21 08:49:19 xserve jabberd/resolver[63255]: attempting connection to router at 127.0.0.1, port=5347
    Jan 21 08:49:19 xserve jabberd/resolver[63255]: [4] [router] write error: Broken pipe (32)
    Jan 21 08:49:19 xserve jabberd/resolver[63255]: connection to router closed
    Jan 21 08:49:19 xserve jabberd/resolver[63255]: attempting reconnect (3 left)
    Jan 21 08:49:19 xserve jabberd/sm[63256]: starting up
    Jan 21 08:49:19 xserve jabberd/sm[63256]: id: xserve.server.#####
    Jan 21 08:49:19 xserve jabberd/sm[63257]: starting up
    Jan 21 08:49:19 xserve jabberd/sm[63256]: sqlite: can't open database
    Jan 21 08:49:19 xserve jabberd/sm[63256]: initialisation of storage driver 'sqlite' failed
    Jan 21 08:49:19 xserve jabberd/sm[63256]: failed to initialise one or more storage drivers, aborting
    Jan 21 08:49:19 xserve jabberd/sm[63257]: id: jupeman.com
    Jan 21 08:49:19 xserve jabberd/c2s[63259]: starting up
    Jan 21 08:49:19 xserve jabberd/sm[63257]: sqlite: can't open database
    Jan 21 08:49:19 xserve jabberd/sm[63257]: initialisation of storage driver 'sqlite' failed
    Jan 21 08:49:19 xserve jabberd/c2s[63259]: modules search path: /var/jabberd/modules/jabberd2
    Jan 21 08:49:19 xserve jabberd/sm[63257]: failed to initialise one or more storage drivers, aborting
    Jan 21 08:49:19 xserve jabberd/c2s[63259]: initialized auth module 'sqlite'
    Jan 21 08:49:19 xserve jabberd/resolver[63255]: attempting connection to router at 127.0.0.1, port=5347
    Jan 21 08:49:19 xserve jabberd/resolver[63255]: shutting down
    Jan 21 08:49:19 xserve jabberd/c2s[63259]: [xserve.server.#####] configured; realm=xserve.server.boyer, registration disabled
    Jan 21 08:49:19 xserve jabberd/c2s[63259]: [#######.com] configured; realm=jupeman.com, registration disabled
    Jan 21 08:49:19 xserve jabberd/c2s[63259]: attempting connection to router at 127.0.0.1, port=5347
    Jan 21 08:49:19 xserve jabberd/c2s[63259]: shutting down
    Jan 21 08:49:19 xserve jabberd/s2s[63261]: starting up (interval=60, queue=60, keepalive=0, idle=86400)
    Jan 21 08:49:19 xserve jabberd/s2s[63261]: attempting connection to router at 127.0.0.1, port=5347
    Jan 21 08:49:19 xserve jabberd/s2s[63261]: [4] [router] write error: Broken pipe (32)
    Jan 21 08:49:19 xserve jabberd/s2s[63261]: connection to router closed
    Jan 21 08:49:19 xserve jabberd/s2s[63261]: attempting reconnect (3 left)
    Jan 21 08:49:21 xserve jabberd/s2s[63261]: attempting connection to router at 127.0.0.1, port=5347
    Jan 21 08:49:21 xserve jabberd/s2s[63261]: [4] [router] write error: Broken pipe (32)
    Jan 21 08:49:21 xserve jabberd/s2s[63261]: connection to router closed
    Jan 21 08:49:21 xserve jabberd/s2s[63261]: attempting reconnect (2 left)
    Jan 21 08:49:23 xserve jabberd/s2s[63261]: attempting connection to router at 127.0.0.1, port=5347
    Jan 21 08:49:23 xserve jabberd/s2s[63261]: [4] [router] write error: Broken pipe (32)
    Jan 21 08:49:23 xserve jabberd/s2s[63261]: connection to router closed
    Jan 21 08:49:23 xserve jabberd/s2s[63261]: attempting reconnect (1 left)
    Jan 21 08:49:25 xserve jabberd/s2s[63261]: attempting connection to router at 127.0.0.1, port=5347
    Jan 21 08:49:25 xserve jabberd/s2s[63261]: [4] [router] write error: Broken pipe (32)
    Jan 21 08:49:25 xserve jabberd/s2s[63261]: connection to router closed
    Jan 21 08:49:25 xserve jabberd/s2s[63261]: shutting down
    Jan 21 08:49:25 xserve org.jabber.jabberd[63254]: ERROR: sm died.  Shutting down server.
    Jan 21 08:49:25 xserve com.apple.launchd[1] (org.jabber.jabberd): Throttling respawn: Will start in 4 seconds
    Jan 21 08:49:29 xserve servermgrd[70]: servermgr_jabber[E]: Error -- jabberd service failed to start
    Jan 21 08:49:29 xserve servermgrd[70]: servermgr_jabber[W]: some jabberd processes failed to start
    Jan 21 08:49:29 xserve servermgrd[70]: servermgr_jabber[N]: waiting for jabberd to finish shutdown...
    Jan 21 08:49:29 xserve servermgrd[70]: servermgr_jabber[N]: jabberd service shutdown completed.
    Jan 21 08:49:29 xserve servermgrd[70]: servermgr_jabber[E]: Error -- failed to start service: jabberd
    Any help would be appreciated.  (I've hashed out, "#", real names)

    Thanks, Tim!  I noticed that I did not have access permission to the directory /jabberd.  As a result, I set the system admin user's permissions to read & write for that and all sub files in the directory.  I then tried to restart iChat Server and here's the new error log:
    Jan 24 11:15:34 xserve servermgrd[70]: servermgr_jabber[N]: waiting for jabberd to finish startup...
    Jan 24 11:15:34 xserve servermgrd[70]: servermgr_jabber[N]: jabberd service startup completed.
    s/jabberd2
    Jan 24 11:15:36 xserve jabberd/resolver[29370]: starting up
    Jan 24 11:15:36 xserve jabberd/sm[29373]: starting up
    Jan 24 11:15:36 xserve jabberd/sm[29371]: starting up
    Jan 24 11:15:36 xserve jabberd/s2s[29377]: starting up (interval=60, queue=60, keepalive=0, idle=86400)
    Jan 24 11:15:36 xserve jabberd/sm[29373]: id: #######com
    Jan 24 11:15:36 xserve jabberd/sm[29371]: id: xserve.server.#####
    Jan 24 11:15:36 xserve jabberd/c2s[29375]: initialized auth module 'sqlite'
    Jan 24 11:15:36 xserve jabberd/sm[29373]: sqlite: can't open database
    Jan 24 11:15:36 xserve jabberd/sm[29373]: initialisation of storage driver 'sqlite' failed
    Jan 24 11:15:36 xserve jabberd/sm[29373]: failed to initialise one or more storage drivers, aborting
    Jan 24 11:15:36 xserve jabberd/router[29374]: loaded user table (1 users)
    Jan 24 11:15:36 xserve jabberd/router[29374]: couldn't open filter file /etc/jabberd/router-filter.xml: No such file or directory
    Jan 24 11:15:36 xserve jabberd/sm[29371]: sqlite: can't open database
    Jan 24 11:15:36 xserve jabberd/sm[29371]: initialisation of storage driver 'sqlite' failed
    Jan 24 11:15:36 xserve jabberd/sm[29371]: failed to initialise one or more storage drivers, aborting
    Jan 24 11:15:36 xserve jabberd/router[29374]: [127.0.0.1, port=5347] listening for incoming connections
    Jan 24 11:15:36 xserve jabberd/router[29374]: shutting down
    Jan 24 11:15:36 xserve jabberd/s2s[29377]: attempting connection to router at 127.0.0.1, port=5347
    Jan 24 11:15:36 xserve jabberd/s2s[29377]: shutting down
    Jan 24 11:15:36 xserve jabberd/s2s[29377]: connection to router closed
    Jan 24 11:15:36 xserve jabberd/resolver[29370]: attempting connection to router at 127.0.0.1, port=5347
    Jan 24 11:15:36 xserve jabberd/resolver[29370]: shutting down
    Jan 24 11:15:36 xserve jabberd/c2s[29375]: [xserve.server.#####] configured; realm=xserve.server.#####, registration disabled
    Jan 24 11:15:36 xserve jabberd/c2s[29375]: [#######.com] configured; realm=jupeman.com, registration disabled
    Jan 24 11:15:36 xserve jabberd/c2s[29375]: attempting connection to router at 127.0.0.1, port=5347
    Jan 24 11:15:36 xserve jabberd/c2s[29375]: shutting down
    Jan 24 11:15:47 xserve org.jabber.jabberd[29367]: ERROR: sm died.  Shutting down server.
    Jan 24 11:15:47 xserve jabberd/sm[29573]: starting up
    Jan 24 11:15:47 xserve jabberd/sm[29573]: id: xserve.server.#####
    Jan 24 11:15:47 xserve jabberd/resolver[29572]: starting up
    Jan 24 11:15:47 xserve jabberd/sm[29574]: starting up
    Jan 24 11:15:47 xserve jabberd/sm[29574]: id: jupeman.com
    Jan 24 11:15:47 xserve jabberd/sm[29573]: sqlite: can't open database
    Jan 24 11:15:47 xserve jabberd/sm[29573]: initialisation of storage driver 'sqlite' failed
    Jan 24 11:15:47 xserve jabberd/sm[29573]: failed to initialise one or more storage drivers, aborting
    Jan 24 11:15:47 xserve jabberd/sm[29574]: sqlite: can't open database
    Jan 24 11:15:47 xserve jabberd/sm[29574]: initialisation of storage driver 'sqlite' failed
    Jan 24 11:15:47 xserve jabberd/sm[29574]: failed to initialise one or more storage drivers, aborting
    Jan 24 11:15:47 xserve jabberd/c2s[29576]: starting up
    Jan 24 11:15:47 xserve jabberd/c2s[29576]: modules search path: /var/jabberd/modules/jabberd2
    Jan 24 11:15:47 xserve jabberd/c2s[29576]: initialized auth module 'sqlite'
    Jan 24 11:15:47 xserve jabberd/resolver[29572]: attempting connection to router at 127.0.0.1, port=5347
    Jan 24 11:15:47 xserve jabberd/c2s[29576]: [xserve.server.#####] configured; realm=xserve.server.#####, registration disabled
    Jan 24 11:15:47 xserve jabberd/resolver[29572]: shutting down
    Jan 24 11:15:47 xserve jabberd/c2s[29576]: [#######.com] configured; realm=#######.com, registration disabled
    Jan 24 11:15:47 xserve jabberd/c2s[29576]: attempting connection to router at 127.0.0.1, port=5347
    Jan 24 11:15:47 xserve jabberd/c2s[29576]: shutting down
    Jan 24 11:15:56 xserve com.apple.launchd[1] (org.jabber.jabberd): Throttling respawn: Will start in 1 seconds
    Jan 24 11:15:57 xserve jabberd/resolver[29605]: starting up
    Jan 24 11:15:57 xserve jabberd/sm[29607]: starting up
    Jan 24 11:15:57 xserve jabberd/sm[29606]: starting up
    Jan 24 11:15:57 xserve jabberd/sm[29607]: id: #######.com
    Jan 24 11:15:57 xserve jabberd/sm[29606]: id: xserve.server.#####
    Jan 24 11:15:57 xserve jabberd/router[29608]: starting up
    Jan 24 11:15:57 xserve jabberd/c2s[29609]: starting up
    Jan 24 11:15:57 xserve jabberd/c2s[29609]: modules search path: /var/jabberd/modules/jabberd2
    Jan 24 11:15:57 xserve jabberd/s2s[29611]: starting up (interval=60, queue=60, keepalive=0, idle=86400)
    Jan 24 11:15:57 xserve jabberd/sm[29607]: sqlite: can't open database
    Jan 24 11:15:57 xserve jabberd/sm[29607]: initialisation of storage driver 'sqlite' failed
    Jan 24 11:15:57 xserve jabberd/sm[29606]: sqlite: can't open database
    Jan 24 11:15:57 xserve jabberd/sm[29607]: failed to initialise one or more storage drivers, aborting
    Jan 24 11:15:57 xserve jabberd/sm[29606]: initialisation of storage driver 'sqlite' failed
    Jan 24 11:15:57 xserve jabberd/sm[29606]: failed to initialise one or more storage drivers, aborting
    Jan 24 11:15:57 xserve jabberd/router[29608]: loaded user table (1 users)
    Jan 24 11:15:57 xserve jabberd/router[29608]: couldn't open filter file /etc/jabberd/router-filter.xml: No such file or directory
    Jan 24 11:15:57 xserve jabberd/c2s[29609]: initialized auth module 'sqlite'
    Jan 24 11:15:57 xserve jabberd/s2s[29611]: attempting connection to router at 127.0.0.1, port=5347
    Jan 24 11:15:57 xserve jabberd/resolver[29605]: attempting connection to router at 127.0.0.1, port=5347
    Jan 24 11:15:57 xserve jabberd/router[29608]: [127.0.0.1, port=5347] listening for incoming connections
    Jan 24 11:15:57 xserve jabberd/c2s[29609]: [xserve.server.boyer] configured; realm=xserve.server.#####, registration disabled
    Jan 24 11:15:57 xserve jabberd/router[29608]: shutting down
    Jan 24 11:15:57 xserve jabberd/s2s[29611]: shutting down
    Jan 24 11:15:57 xserve jabberd/c2s[29609]: [#######.com] configured; realm=#######.com, registration disabled
    Jan 24 11:15:57 xserve jabberd/s2s[29611]: connection to router closed
    Jan 24 11:15:57 xserve jabberd/resolver[29605]: shutting down
    Jan 24 11:15:57 xserve jabberd/c2s[29609]: attempting connection to router at 127.0.0.1, port=5347
    Jan 24 11:15:57 xserve jabberd/c2s[29609]: shutting down
    I see the errors related to not finding a .xml file and the failed initialization of sqlite storage driver, but I don't know how to fix these.  Any ideas?

Maybe you are looking for

  • Photo album closes every time I click on it.

    Last night my iphone 4(os5) froze while taking a pic. It was on the shutter screen that is usually just a second. I waited to see if it would finish but when it did not I rebooted my phone. After reboot every time I try to access the picture roll thr

  • Issue with running reports on the portal

    Hello Guyz 1. I have a question regarding running reports on the portal. 2. I have standard web templates that have been installed in BI. 3. But in the portal, we are not able to run these reports. 4. Do we need to create custom I-Views or can we ins

  • How do I set a path in an executable for a DLL?

    I wrote a VI that is using a DLL in the Call Function Library Node. I set the parameters to Specify Path In Program in the node. I did this because I am distributing the VI as an executable and the path is obviously not the same as my VI. When runnin

  • EA3/EA2 - SQL History Timestamp column

    The formatting of the Timestamp column in the SQL History now uses the NLS Timestamp Format (yay!), but unfortunately does not cope with the seconds component of the format: NLS Timestamp Format is DD-Mon-YYYY HH24:MI:SSXFF Timestamp column in the SQ

  • Why Oracle crashed when running?(ORA-04030)

    There are some application connected to Oracle, but Oracle crashed down one day. Trc file belows: Dump file d:\oracle\product\10.2.0\admin\testdb\bdump\testdb_ckpt_3640.trc Thu Oct 13 14:13:34 2011 ORACLE V10.2.0.1.0 - Production vsnsta=0 vsnsql=14 v