10.6.8 update - currupted my finder - mac pro

Hi
update from 10.67 to 10.6.8 has caused finder to not launch the window that shows device places recent docs etc
also context menu is currupted with names like N31,N68, BN50, LB1 and N220 etc etc etc , clicking on about mac returns nothing
and I can not authenticate system preferences panel click on the lock hangs system.
I have tried deleting com.apple.finder.plist and com.apple.sidebarlists.plist to no avail.
I have tried creating new user, resetting passwords, all to no avail
anyone knw of a fix for this ???

Did you hold down the C key while booting from the install disc?
Resolve startup issues and perform disk maintenance with Disk Utility and fsck

Similar Messages

Latest Premiere Pro CC update 7.2.2 Update Failed on New Mac Pro.

I can't get the latest 7.2.2 Premiere Pro CC to update on the new Mac Pro computer. Is it not compatible?
"Update Failed. Update could not be applied."
CC Manager says I am currently updated to the latest version. When I check my Premiere CC Version I am only on 7.0. I tried manually downloading 7.2.2 .dmg file and it fails.

Same problem here on a previous-gen MacPro tower running 10.7.
PPro CC won't update
Have yet to find a useful suggestion.

Where can I find Mac Pro Hard Drive Holder?

Where can I find Mac Pro Hard Drive Holder? Only 4 came withe the computer and I need some more.
Anybody knows where I could buy some?
Thanks

http://www.transintl.com/store/category.cfm?Category=2705

Graphics Firmware Update 1.0 for Mac Pro 2006?

The official documentation is confusing because Apple lists the 2006 Mac Pro as "incompatible" with Windows 7 here: http://support.apple.com/kb/HT3986 but at the bottom of the same page it states that the update is for the "Mac Pro with NVIDIA Geforce 7300 GT" which is the original card that the 2006 Mac Pro came with. The page makes no reference to the specific model other than that.
Also, the compatibility page for the update here: http://support.apple.com/kb/HT3967 lists graphics "Device ID 0x0393, or 0x009D" as the applicable units, one of which, ID 0x0393, matches the 7300 GT in my 2006 Mac Pro.
Again, no reference to specific Mac Pro generation is made on any page, including the driver download page
here: http://www.apple.com/downloads/macosx/apple/firmware_hardware/graphicsfirmwareup date10imacandmacprocompatibilitywithwindows7.html
only the points I outlined.
Is this an error on the part of Apple or is it for the 2006 Mac Pro?

Marketing seems to write the technical hardware articles lately!
Even though not supported officially, and while Windows 7 Pro 32-bit will only allow 2GB RAM, it does boot and install. 64-bit you have to jump through extra hoops is all.
UEFI made it easier to have a BIOS and/or EFI subset, but UEFI came out 1/2006 and Apple probably settled on EFI32. It wasn't until 2008 that UEFI 2.1 showed in Mac Pro and which marks the "official support" point in time and hardware reference.
I was surprised - dumbfounded - to see the 7300GT firmware update too. And I had to remove mine when installing Windows Vista x64 in the past, and for the RC last year.

Unable to install 10.9.5, iTunes 11.4, other system updates on my 2013 Mac Pro

Hi everyone - I'm hoping someone can help me out. My 2013 Mac Pro is currently running 10.9.3. For a few weeks now, I've been trying to get 10.9.4 to install but every time I do, the computer reboots but doesn't actually update. The same is true with 10.9.5 and iTunes 11.4. No matter what I do, including manually downloading the installers (10.9.4 Combo, 10.9.5, and iTunes 11.4), they fail. I suspect that it is a really corrupted permissions issue and I've run the Fix Permissions action in Disk Utility several times but it never changes things.
What's even more confusing is the Updates tab of the App Store app. It shows that I have updates ready and they keep repeating as installed.
Any help is greatly appreciated. As it stands, I'm going to do a totally clean install of Mavericks when it ships but right now, I can't even connect my iPhone 6 Plus to iTunes because it isn't 11.4.
Cheers,
Brian

I would suggest:
Repair the Hard Drive and Permissions - Mavericks, Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
If this does not work, then try reinstalling OS X instead which will automatically install the current version:
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Lion, Mountain Lion, or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

Update OS on older Mac Pro effect on CC

Has anyone updates their older Mac Pro (2009) to OS 10.10? I'm wondering if CC works well and might be faster.

I don't do Mac, but I have some saved links to read
Yosemite sometimes has problems, often related to "default" permissions needing to be changed
-one person's solution https://forums.adobe.com/thread/1689788
-and a Java update https://forums.adobe.com/thread/1507936
-http://blogs.adobe.com/creativecloud/creative-cloud-and-yosemite/
-https://helpx.adobe.com/x-productkb/global/mac-os-yosemite-compatability.html

HT5313 This update murders my 2006 Mac Pro

The machine boots to a scrambled screen, and requires a total restore from Time Machine. According to this article, I'm not alone:
http://www.bgr.com/2012/09/20/mac-pro-boot-10-7-5-snow-leopard-update/
Has anybody been successful updating an old Mac Pro?

Every Mac Pro model running 10.6.4 or later can accept the Apple/ATI 5770, which uses one aux power cord. In the Mac Pro 1,1 (2006) or Mac Pro 2,1 (2007) they run slightly slower than their full rated speed due to PCIe 1 slots.
Be sure you get the version with Apple firmware, or it will not work under Mac OS X. Flashed PC cards will not light up until Mac OS X is fully loaded and running, making them useless when debugging.

Updates break Activity Monitor (Mac Pro & G4)

After applying the recent updates to my Mac Pro Quad Xeon and my G4 dual 800, both running 10.4.11, Activity Monitor does not work on either machine. On double-clicking, I get the launch animation and the Dock expands for less than a second, but the application does not launch. Trashing the .plist file in the User domain prefs folder doesn't help. Neither does Repairing Permissions.
Conversely, Activity Monitor works fine on my iMac, running 10.5.5. All machines are networked via a Time Capsule – the iMac via AirPort, and the desktops directly via ethernet (Cat 5e).
Any ideas about what's gone wrong here?

Good call, BDAqua. I checked in system.log and Crash Reporter. Here are the results for both machines:
Host Name: MacPro
Date/Time: 2008-09-18 19:04:19.386 +0100
OS Version: 10.4.11 (Build 8S2167)
Report Version: 4
Command: Activity Monitor
Path: /Applications/Utilities/Activity Monitor.app/Contents/MacOS/Activity Monitor
Parent: WindowServer [68]
Version: 1.5.3 (58)
PID: 486
Thread: Unknown
Link (dyld) error:
Library not loaded: /System/Library/PrivateFrameworks/GraphKit.framework/Versions/A/GraphKit
Referenced from: /Applications/Utilities/Activity Monitor.app/Contents/MacOS/Activity Monitor
Reason: image not found
Host Name: G-Four
Date/Time: 2008-09-18 19:02:53.323 +0100
OS Version: 10.4.11 (Build 8S165)
Report Version: 4
Command: Activity Monitor
Path: /Applications/Utilities/Activity Monitor.app/Contents/MacOS/Activity Monitor
Parent: WindowServer [61]
Version: 1.5 (54)
PID: 236
Thread: Unknown
Link (dyld) error:
Library not loaded: /System/Library/PrivateFrameworks/GraphKit.framework/Versions/A/GraphKit
Referenced from: /Applications/Utilities/Activity Monitor.app/Contents/MacOS/Activity Monitor
Reason: image not found
A library missing on BOTH machines?

UPDATE SOFTWARE ON A MAC PRO THEN IT WILL NOT REBOOT

Dear All,
I have just updated software on my daughter's laptop and when the machine starts to reboot, it gets stuck on the white screen with the apple logo and the wheel running
Help - she needs it urgently for a project
William COtterell

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into Recovery by holding down the key combination command-R at the startup chime, or from a local Time Machine backup volume (option key at startup.) Release the keys when you see a gray screen with a spinning dial. When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
How to back up and restore your files
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
How to use and troubleshoot FireWire target disk mode
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode.* The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Post for further instructions.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Boot into Recovery again. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
Step 8
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

Trouble with Updating Apps on USED Mac Pro

I purchased a used Macbook Pro in Summer 2013, and I thought that I had updated the system to be under my Apple ID and user info so that I can update
applications through my account. However this keeps popping up, and I need to know how to disable the old Apple ID and change it to mine.

You need to delete those applications and then download them while signed into your Apple ID. For preloaded ones, this may require going to the Mac App Store main page, clicking on Support under Quick Links, and contacting Apple.
(106991)

HT204266 do I need to update drivers on my mac pro, or is this done through software updates

do I need to update drivers or is this done through software updates

Welcome to Apple Support Communities
For drivers for your hardware (printers, AirPort cards, GPUs...), they are done through Software Update, so open it and check if you have updates. If so, install them.
However, note that third-party peripherals (external drives, routers...) may not be updated through Software Update. In this case, you should contact with the manufacturer in order to get the latest drivers for these devices

Mac Pro SMC Firmware Update Won't Install (Mac Pro 2007)

This keeps popping up in Software Update, even though I've 'Installed' it.
I restart, progress bar goes to 100%, fans spin up...reboot. However, evry time Software Update loads...there it is agian. I've checked the Firmware/Boot ROM number, and it's not what it should be (is still the previous rev.)
I've done this 4 times now...
Is it even worth bothering with?

Did you actually run the update from your Utilities folder (where I believe it ends up)? You'll go through a process of rebooting and hearing the long tone / seeing grey screen and progress bar. Until it's actually run properly, you'll keep seeing reminders.
Matt

10.5.6 Update on Mac Pro

I tried to install the Combined Update on my new Mac Pro (4 days old) but it has been stuck on the same screen for the last 8 hours. It says: "Installing 2 items. Configuring Installation."
It doesn't seem right that it is on the same screen for that long. Does anyone have any suggestions?

Hi michaelgraham-
After you backed up your system prior to the update, did you also use Disk Utility to repair permissions on the hard drive?
Are you able to force quit the installer? If not, the only way out may be to hold down the power button until the Mac shuts off and try again.
If you don't have a backup you may also want to keep your fingers crossed that your mac is able to boot at all from the hard drive. Once you have confirmed that you can or cannot boot normally, make sure to launch from the System Installation disk and run Disk Utility first before you try and upgrade.
Luck-
-DP

My Late 2008 Mac Pro won't update to Yosemite, even though it has the Mac OS X 10.6.8.

I'm trying to update my Late 2008 Mac Pro to Yosemite. I've checked for updates, and it says I don't need any. I'm running OS X 10.6.8. Any suggestions?

Use this display to get a summary of your Hardware, but do not post your serial number here.
 menu > About This Mac > ( More Info ) > Report > Hardware

Recent bootrom update to 2010 Mac Pro?

Hello everyone,
While browsing through Geekbench today I noticed the following:
MP51.007F.B01
My bootrom for my 2010 says: MP51.007F.B00
What is going on here? Is this a new firmware update or just someone pretending to use a PC to emulate a Mac?
Here is the link: http://browse.geekbench.ca/geekbench2/view/293941
I thought the 2010 mac pros and 2010 parts show firmware of: MP51.007F.B00 - what is B01?

Hi,
Apple lists the avaiable Firmware (EFI and SMC) updates here http://support.apple.com/kb/HT1237 and according to this there are no updates for the 2010 Mac Pro.
And if it also isn't shown through the "Software Update" it is either a hoax or some sort of Beta-testing guy violating his NDA (Non-Disclosure Agreement).
Regards
Stefan

10.6.8 update - currupted my finder - mac pro

Similar Messages

Maybe you are looking for