10.7.2 clean install, cannot install iPhoto 9.2

So 3 days ago I bought a new MBA 13" base model and after 24 hours of attempts, I couldn't get iPhoto to update to 9.2. So after 2 days (additional) of trying the Lion Recovery thing (didn't work), I went to my Late 2011 Mac mini to the App store and force downloaded a fresh, up-to-date, copy ot Lion. Copied this to a USB drive, erased the MBA internal disk, Fresh Clean Install of Lion (15 minutes btw). Lion boots fine, asked me to sign into iCloud and told me that to turn on photostream that I needed to download iPhoto. Went to the App store, logged in, went to Purchased, downloaded iPhoto 9.2. The download went through almost the entire way and then, "An Error Occurred" appears in place of the download progress bar in the Purchased tab. A few moments later my screen goes Gray and 3/4 of the way down in the center I get the Spinning Bar. Now it's stuck there, spinning (for atleast the last half hour).

What version do you have now?
Upgrading from iPhoto 09 or earlier requires a purchase.

Similar Messages

  • IPhoto won't open after clean install followed by Time Machine restoration of data.

    Hello.
    I've just completed a clean install of OS X Yosemite followed by a restoration of my data from a Time Machine backup on my Mid 2010 iMac i3 3.2GHz.
    Since the install iPhoto will no longer open. The icon in the dock bounces for a short while and then I receive the following error: iPhoto cannot be opened because of a problem. It then shows problem details and system configuration, the top part of which I post below:
    Process:               iPhoto [466]
    Path:                  /Applications/iPhoto.app/Contents/MacOS/iPhoto
    Identifier:            com.apple.iPhoto
    Version:               ???
    Build Info:            iPhotoProject-910029000000000~1
    App Item ID:           408981381
    App External ID:       729712666
    Code Type:             X86-64 (Native)
    Parent Process:        ??? [1]
    Responsible:           iPhoto [466]
    User ID:               501
    Date/Time:             2014-11-15 16:52:59.886 +0000
    OS Version:            Mac OS X 10.10 (14A389)
    Report Version:        11
    Anonymous UUID:        34962211-17B1-3442-0D78-C0F697641981
    Time Awake Since Boot: 920 seconds
    Crashed Thread:        0
    Exception Type:        EXC_BREAKPOINT (SIGTRAP)
    Exception Codes:       0x0000000000000002, 0x0000000000000000
    Application Specific Information:
    dyld: launch, loading dependent libraries
    Dyld Error Message:
      Symbol not found: _OBJC_CLASS_$_RKMigratedLibrary
      Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto
      Expected in: /Applications/iPhoto.app/Contents/MacOS/../Frameworks/RedRock.framework/Version s/A/RedRock
    in /Applications/iPhoto.app/Contents/MacOS/iPhoto
    I then get a long list of binary image data which I haven't posted here (but can if required).
    I believe the version of iPhoto I have is 9.6 as that update was installed a short while before I did the clean install of the OS.
    I would try reinstalling the iPhoto again but cannot see a way to uninstall or to download again from the app store.
    Has anybody seen this behaviour before and/or know of a fix or workaround so I can get my iPhoto program working again please?
    Many thanks for your time.
    Alex

    Looking at that report I would reinstall iPhoto as a first step:
    To re-install iPhoto
    1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
    2. Download it from the App Store to reinstall It's on your Purchases List* there.
    *Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
    http://support.apple.com/kb/HT4928
    One question often asked: Will I lose my Photos if I reinstall?
    iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

  • Installing iPhoto on a clean install of Snow Leopard

    I bought a new Mac and gave my dad my old Macbook Pro (15 inch Core 2 Duo, 2006). I was running Snow Leopard on the laptop but I wanted to clean it off before giving it to him. So, I inserted the Snow Leopard disc, restarted the computer, held down C, and ran disk utility and erased it. Then I did a clean install of Snow Leopard. I didn't realize that SL did not contain iLife (I know, silly me). I would rather not reinstall Tiger, Leopard, and then Snow Leopard all over again, so is there any way to get iLife on the laptop?
    So far, I have inserted the 2nd disc of Leopard and clicked on Install Bundled Software, but kept getting Alert: This software cannot be installed on this computer. And Insterting either of the Tiger discs does not work either.

    Yes, older software will most of the time not load. Especially from a previous OSX. If I remember correctly I had to by iLife when I upgraded, I do have the disks, and I beleive I bought them after I installed SL. (SL did not come iLife)
    They do offer iPhoto on the APP store, but that is V 9.51 which won't run on SL, the most 10.6.8 iPhoto is 9.2.3
    The new iLife'11 has too new versions, that's why I said to buy the OLD version of '11
    I have all those discs as well, I would not have bought "11 if I could have loaded off one of those discs.
    Maybe someone knows a trick to make those old applcations load, and I would be most interested in finding how they did it.
    All the best

  • Cannot perform a clean install of CF 10 - ODBC Agent and ODBC Server are not in Services - Win2k8 R2

    I've tried to perform a clean install on a Win2k8 R2 x64 server several times and I can't seem to get it to install.
    I was upgrading from CF 9, which took several attempts. I eventually got CF 10 working and running with the latest updates. But the server would only run for about 15 minutes and everything would come to a screaching hault. ColdFusion pages would fail to load with no error. The pages would hang and wait for the server to respond, which it never did. Restarting IIS would fix the problem.
    I have about 20 CF sites on the machine. I came accross an article that talked about pool sizes, etc. I ended up trying a few things with the Web Server Configuration Tool, and as I was adding/deleting servers, I got an error that some application unexpectedly quit, but it wasn't the wsconfig tool. This happened about 3 times as I was deleting servers that I had previously added. Then I tried loading the CF Admin and I got a 500.0 internal server error.
    So I bit the bullet and figured I would start all over again. I uninstalled CF 10... now there's nothing on the machine. Re-installed CF 10, and I get the same 500.0 Internal Server Error. I uninstalled, restarted, installed... same thing. Then I found an error in the event viewer that reads:
    The description for Event ID 0 from source ColdFusion 10 ODBC Server cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
    If the event originated on another computer, the display information had to be saved with the event.
    The following information was included with the event:
    ColdFusion 10 ODBC Server error: 0
    StartServiceCtrlDispatcher Error!
    Then I found out that neither the ColdFusion 10 ODBC Agent or the ColdFusion 10 ODBC Server have been installed... at least they're not showing up in the list of services. msconfig also shows that they don't exist at all. I tried reinstalling several times and I can't get them to show up.
    PS: It's 6:15 AM and I've been working on this since 10 PM last night. I NEED HELP! Thanks!

    Hello,
    Once you move your application from any prior version of ColdFusion to ColdFusion 10, you will have to tune your application, as the architecture changed from JRun to Tomcat.
    You can refer to the article http://blogs.coldfusion.com/post.cfm/tuning-coldfusion-10-iis-connector-configuration for parameters, that needs to be tuned appropriately to make CF connector works flawlessly.
    Hope this helps
    Regards,
    Anit Kumar

  • I downloaded updates to iphoto and computer erred on install. I cannot open iphoto. I decided to reinstall iphoto from app disk and now I get an error message"......iphoto may be damaged or incomplete"  Any suggestions how to get iphoto going again???

    I downloaded updates to iphoto and computer erred on install. A report went to Apple.
    I cannot open iphoto. I decided to reinstall iphoto from my app disk and now I get an error message"......iphoto may be damaged or incomplete"  Any suggestions how to get iphoto going again???
    My iphoto library still exists and I don't want to lose it.

    https://discussions.apple.com/community/ilife/iphoto

  • Cannot Install Software Update after a Clean Install

    I did a clean install of 10.5. I ran the initial Software Update and proceeded to install all the available updates including Version 10.5.4. I installed some software and later did another Software Update check. There were 2 more updates available.
    Java for Mac OS X 10.5 Update 1 adds support for Java SE 6
    Security Update 2008-005 (Leopard)
    I rebooted the iMac as requested and the Software Update window appeared. I checked both updates and proceeded. The progress bar proceeded about 1/8 of the way with the message Installing 2 items.... Configuring Installation. This appeared to hang there and I left it running overnight. When I looked at it again, the progress bar had not moved. I then tried each one separately, still using the Software Update. Same problem only that the Java update showed the progress bar 1 / 2 the way and is hanging there.
    I verified the disk and it was okay. I have used the iMac for almost 2 years and have never had a problem with the Software Update.
    Here is the last entry in the install log which seems to indicate the install was done, but the Software Update Window is still there with the "Installing 1 Item" message and I cannot stop the process or force quit it.
    Any help or suggestions would be appreciated.
    Sep 9 07:52:25 master-accounts-imac Software Update[142]: Running install actions
    Sep 9 07:52:25 master-accounts-imac Software Update[142]: Processing JavaSE6:
    Sep 9 07:52:25 master-accounts-imac Software Update[142]: Determining files to install
    Sep 9 07:52:26 master-accounts-imac Software Update[142]: It took 0.36 seconds to create the install plan for JavaSE6.
    Sep 9 07:52:26 master-accounts-imac Software Update[142]: Configuring deferred files
    Sep 9 07:52:26 master-accounts-imac Software Update[142]: Assembling temporary receipt
    Sep 9 07:52:26 master-accounts-imac Software Update[142]: Performing pre-extraction actions
    Sep 9 07:52:26 master-accounts-imac Software Update[142]: run preinstall script for JavaSE6
    Sep 9 07:52:30 master-accounts-imac installdb[174]: done. (0.005u + 0.003s)

    I guess I should be careful how I word my posts.
    I should have said I resolved the problem that I had. The solution to the problem was to do a manual download of the updates. That worked without a hitch and while solving the immediate problem did not help me understand why automatic updates failed to properly install the identical files.
    a brody
    It is a relatively new iMac purchased from Apple in early 07. Yes, it was a a Retail Version of OS X 10.5 that I purchased when I upgraded 10.4, I have seen this problem many times in Windows, but never experienced it in the almost 2 years of mac usage. I guess I am not the only one having problems as there is a similar post made several hours after mine.

  • UK Apple store cannot do a clean install of Mountain Lion

    I was in Bromley Apple store on Friday, and asked for a clean install of my mac-mini. The genius said it will restore to factory default - Lion, not Mountain lion as the UK shops dont yet have ML on their servers.
    So I didnt get the clean install I was hoping for, but the corrupted index appears to be re-enabled.
    I cannot get Spotlight to see the Applications or mail.
    Any thoughts

    Yes, that makes a difference...indexing has been disabled.
    Launch Terminal and at the prompt copy & paste this line of code...
    It is a scroll so be sure to copy the entire line.
    Code:
    sudo launchctl load -w /System/Library/LaunchDaemons/com.apple.metadata.mds.plist
    Press return.
    EDIT: Or perhaps better...
    sudo mdutil -i on /

  • I want to do a clean install of Windows 7 Pro on my computer and my installation of Adobe Design Premium CS3 is not functioning. I cannot start it to get in and deactivate the Creative Suite installation.

    I need help with deactivation.
    I want to do a clean install of Windows 7 Pro on my computer and my installation of Adobe Design Premium CS3 is not functioning. I cannot start it to get in and deactivate the Creative Suite installation.

    if you're using the same computer hardware to reinstall your cs3, you don't need to deactivate first.
    but if there's a significant hardware change you can ask adobe support for an activation count reset. contact adobe support by clicking here and, when available, click 'still need help', https://helpx.adobe.com/contact.html

  • Cannot load computer, Cannot perform a clean install

    Hello everyone,
    Firstly i am primarily a PC user, so bear with my Mac ineptitude. The computer is a MacBook Pro 15" A1286 model - Early 2012 (i think).
    I haven't used my MacBook for a couple of months and when i recently went to power it on (full battery charge) i am stuck with a loading/updating screen.
    The bar goes about half way and then the computer simply shuts down - so i cannot even load the OS.
    Im not sure whats going on, so now i basically want to perform a clean installation / format drive.
    So i follow some instructions online and one article says to hold down 'Command + R' when turning the computer on - which brings up the disk utilty fine.
    I then proceed to try and erase the drive, format the drive, partition the drive, reinstall os x - nothing works
    I am hit with an error message - "Couldn't unmount disk".
    After reading several guides, it seems i might be able to boot off another device in order to be able to perform a clean install by loading a file onto a DVD/Flash Stick - but i cannot download anything off my AppStore account as my Mac is not working.
    If anyone could point me towards a workable solution, it would be greatly appreciated.
    Thankyou

    Thanks for the fast reply, however it seems that the first aid utility has detected nothing abnormal with the drive.
    Could it really be that the HDD is unusable?
    I would still be very interested in any other tips or suggestions.
    Thankyou

  • Cannot log in after clean install of Server 10.5.5

    Excuse my lack of organization in this post, but i am a bit fried right now from trying to figure this out.
    After installing OS X Server 10.5.5 via firewire (from mac mini) to the stock ATA HD in an upgraded G4, I cannot log into the system admin account that was created during the initial setup. I know im typing it exactly correct (what i entered in setup). The setup runs flawlessly and will log into the account after setup is complete, but after a reboot (to get the G4 out of Target disc mode), no dice.
    I have even created another admin account (non system admin) during the time i had the option in setup and cannot log into that either. Setting it to auto log in isn't working either, yet other changes i make (such as showing restart and shutdown buttons) are effective after reboot
    The only explaination that i can come up with is the way i am rebooting the system after setup is complete (rebooting via power button as shutting down from the apple applet will not shut down the machine in TDM) Obviously, this isn't a best practice, but will it screw up the login creds every time? I have reinstalled the OS 3 times and get the same result.
    If it is the way im rebooting the box, does anyone have a better suggestion of getting it out of TDM after the install and setup?

    Download and run Pacifist on the system install disks that came with the computer to look for iPhoto. If you find it Pacifist can extract and install iPhoto.
    Also if iPhoto came with the computer originally then look for the file shown in this screenshot and use it to install iPhoto:
    Click to view full size

  • How to get iPhoto and iTunes to a clean installed Yosemite from Time Machine

    I wiped the Hard Drive and clean installed to OS X Yosemite. For Some reason, some of my Time Machine back ups disappeared or got deleted and it wasn't even full. I had back ups from 2011 and now it only starts from 2013 of June.
    Next....when I try to restore my other apps(like iPhoto and my iTunes) I doesn't give that warp space effect in the background. It gives me the window layer effect but I just see the same mountain background on the desktop as the default Yosemite(unless thats how its suppose to look like that?) I can't restore using Time Machine because the little lines at the right are red (see screen shot) and it won't let me restore, and if i go back by using the arrows, if freezes. So,
    I don't know how to install the old iTunes and iPhoto on my existing clean installed Yosemite from my Time Machine.
    Can someone help me?

    @ LarryHN Thank you ver much for you help I understand now that you just can't copy over the old library(got it)
    I had the latest version of iPhoto before I cleaned installed.
    The link you gave me was most informative and I want to thank you. But still problems arrive.
    This came up and I don't know which one to pick

  • How do i install iPhoto on a clean install of mavericks

    My macbook was getting extremely slow so i did a clean install of mavericks.  Now i don't have iPhoto.  I have the original install dvd, but when I try the applications install dvd it just ejects it after a few seconds.   I can't find anyplace on the app store where i can download a version for mavericks.

    a little clarification.  The original install dvd is 10.5.5.  I installed mavericks over the net.

  • Mail 3.0 cannot send email after clean install

    mail does not manage to send mail after leopard was installed via a clean install. It seems to work for upgraded machines, but unfortunately for me, I prefer the clean install.
    The problem is, that the SMTP-server simply rejects sending attempts from mail. mail then simply says "cannot send message using the server ...". I got suspicious when I entered a wrong password as then mail says that authentication failed (so the communication has to work somehow).
    So I worked on getting the server logs and they say the following:
    +Helo command rejected: need fully-qualified hostname; from=<[email protected]> to=<[email protected]> proto=ESMTP helo=<Core>+
    Seems like my computer send only the computers name as hostname and not the .local part any more. Systems which have been upgraded instead of a clean install do it "right" meaning they send hostname.local instead of just hostname which gets accepted by the smtp-server.
    So the question is, where is the problem here? I do not really know what would be the right behavior regrading the computers name and hostname but I realize that 10.5 differs here from 10.4 leading to the problem above. My workaround in the moment is using Thunderbird which is quite sad after buying and upgrading to the new system...

    I am running into the same issue. My insightbb account wont send messages. My yahoo account on the other hand, works fine. Heck, Mail wont even let me setup the insightbb account. Sometimes i can, but it rejects my username. I have to use thunderbird to send email from my insightbb account

  • I had my hard drive cleaned and cannot install cs6 master collection from disk.  I am getting error message failed to initialize.  please download adobe advisor support.  I have a pc and am using windows 8

    I had my hard drive cleaned and cannot install cs6 master collection from disk.  I am getting error message failed to initialize.  please download adobe advisor support.  I am using a pc and have windows 8.  Please help.

    start at the top and work your way down applying applicable fixes until your problem is resolved.
    if cc (win):  https://helpx.adobe.com/creative-cloud/kb/creative-cloud-desktop-application-failed.html
    if, your error is:
    "Installer failed to initialize. File not found." or "Installer failed to initialize. This could be due to missing files."
    first, rename OOBE Folder to OOBE.old.
    to find OOBE:
    64 bit win OS: Program Files x86\Common Files\Adobe\OOBE
    32 bit win OS: Program Files \Common Files\Adobe\OOBE
    mac os: HD>library>application support>adobe>caps
    mac os: USER>library>application support>adobe>OOB
    if that fails or isn't the exact error you see, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall.
    if you're using a dvd to install:
    copy the disc contents to a desktop directory and install from that directory.
    if you're using a mac:
    1. Try to Create a new user account in Mac with Administrator Priviledges.
    2. Login to the New user, Navigate to Mac HD> Application> Utilities> Adobe Installer folder, Locate products like Adobe Reader, Adobe Flash, Adobe Air and un-install them
    3. Navigate to User Library> Application Support> Adobe and move Adobe to Trash.
    4. Navigate to Mac HD> Library> Application Support> Adobe and move Adobe to Trash.
    5. Start the installation again.
    if everything applicable above fails, check your installation logs:
    http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-install-using-logs-elements.html

  • I cannot Clean Install Lion.

    I had lion installed (all updates) and I had to reinstall because I was having problems with speed and stability of the system. Now I cannot install it neither from the Recovery HD partition nor the usb and the dvd disk that I burned from the InstallerESD.dmg that I found on the internet that works as a media for a clean install. When I use the DVD version that I burned and before I choose anything for the installation process, just after the loader finishes loading, I get an error message telling me that Installation failed, try to reinstall. (duh! that's what im trying to do anyway!). With the usb hd that I mounted the .dmg after I startup my system with the opt key pressed and after choosing the USB disk to boot, I get a "forbidden sign", Circle with a diagonal line in the middle, just where the apple logo was and the system hangs there. The computer is an iMac 21,5'' with 16GB Ram, May 2011 model.
    I don't have the snow leopard disk. I just have another macbook that has lion installed.
    What can I do?
    Thank you
    EDIT: Also I tryied mounting with the Lion recovery tool the recovery partition on a usb flash drive so I can boot up from there and download and install from scratch the OS. But I still get the weird "No access" sign in the apple logo after booting from the usb drive.

    You can call AppleCare and then place your order. You can reach AppleCare at:
    Greece
    00800 44145417
    www.apple.com/gr/support/
    Explain that you need to order duplicates of the original Install DVDs, you will need the serial number and a credit card to order.
    If you still have the original box the computer shipped in look again, it's incredibly unusual for machines that came prior to Lion (10.7.x) to not include the media. It's easy to overlook but it's probably there. You will find a small box that included the owners manual, it's packed with the manual.

Maybe you are looking for

  • Saving an image as PNG to a specific location, and appending the document's existing name.

    Hello   I'm building a very complex action that references several scripts. One of the scripts needs to save the existing canvas as a .png file to a specific directory, and rename the .png with the document's existing name and adding "-SCREEN" to the

  • Disappearing graphics in CMYK PDF output from Frame 12.0.3

    (I thought we already had a thread about this, but I can't find it!) - but I've just run into the same problem with Frame 12 that I've read about other people having. I have Frame 12, fully patched. With a book file selected (and all my chapter files

  • Travel Advance Posting in Other Currency

    Hi All, While posting Travel Advance in USD , System is taking exchange rate from CURR table. Our requirement is we want to post the Document in USD and also want to take exchange rate from Advance table. Is there any BADI or Userexit available to ch

  • Need help with 1 thing

    I followed a tut and learned how to do everything I'll need. I'm a kid, so I don't need to be professional about anything. Anyways, the tutorial left out the last part. How to publish your website. It said to find a guide in the help from dreamweaver

  • Content Alignment = Justify In text Box

    Dear Friend, i have text Area Item for description .Here i want content alignment justify in that Text Area. How can i alighnment in Text Box. Thanks Edited by: Vedant on Sep 16, 2011 4:32 AM


HashFlare