10.7 server, software update problems

Ok, so i got my server all up and running, and then i started software update server. This is were the problem happened, the next day my ISP reported i used about 60 gig's in one day. I noticed that i check marked the wrong block, but even not i unchecked it, it still looks for all updates, is there a way to fix this?

Just an update - I configured the server to be a private server. I can now see the hub and all the other macs/pcs on my network (OK - both of them!). I still cannot see the internet.
I am beginning to rue the advice from the apple shop that the server version was the same, but with a better set of processors and disk!

Similar Messages

/library/server/software update - can data be deleted?

I run OS X Server 2.2.2 on my Mac mini. I discovered that i have turned on the option software update. As i don't use my Mac mini Server for Software Update distribution i disabled this service.
Now i discovered that in folder
/library/server/software update
a lot of data is still stored. I tried also to delete the software updates available still in the disabled Software Update section within server admin.
Can i delete manuall all these software update .pkg files?

If you are not planning to offer this Service, Once you have turned off Software Update Service, you CAN delete these items.

10.9.x Server software update for 10.10 clients

Hi - We have a 10.9.x Server running Software updates. Simple question...will 10.9.x server download updates for 10.10 clients? I can look at the logs but I am lazy. Thought I would post a question here. Thank you

Hi chwhite97,
If you are running Mac OS X 10.9 (Mavericks) Server for your software update service, it can only provide updates for Mac clients running 10.6 through 10.9. See this article for reference -
OS X Server: Software Update Service compatibility - Apple Support
If you wish to update your server so that it will support Yosemite clients, it would need to first be updated to Yosemite itself, available here -
https://itunes.apple.com/us/app/os-x-yosemite/id915041082?mt=12
Once this is done you would need to update the server's software, available here -
https://itunes.apple.com/us/app/os-x-server/id883878097?mt=12
Thanks for using Apple Support Communities.
Best,
Brett L

Server Software Updates

Is it advisable to have Tiger servers that are replicas a version or two behind the Master in server software updates? I.E. Master at 10.4.8, some replicas at 10.4.7?

That sounds a bit cumbersome.
Even disjoining the replicas sounds "much".
Having a good backup before updating is a good thing and having a recent archive doesn't hurt either.
But I think updating the master first and then the replicas should suffice. Seems to have worked for me...
If something goes wrong:
http://docs.info.apple.com/article.html?artnum=302332

I bought a new 5s and its front and back camera are not working, showing black image. My phone is IOS 7 updated, and some one insisted that its is software updation problem, and can be resolved by updating to IOS 8. Kindly suggest.

I bought a new 5s and its front and back camera are not working, showing black image. My phone is IOS 7.1.2 updated, and some one insisted that its is software updation problem, and can be resolved by updating to IOS 8. Kindly suggest.

I have the same issue on my iPhone 5s
I've closed the app and re-booted the phone several times but it did not resolve the issue.
Upgrading to iOS 8.0.2 did not resolve it either.
Erasing the iPhone and restoring from a backup did not resolve it.
I'm not sure what else to do.

I bought a new iPhone 5s and its front and back camera are not working, showing black image. My phone is IOS 7 updated, and some one insisted that its is software updation problem, and can be resolved by updating to IOS 8. Kindly suggest on this. Wil

I bought a new iPhone 5s and its front and back camera are not working, showing black image. My phone is IOS 7 updated, and some one insisted that its is software updation problem, and can be resolved by updating to IOS 8. Kindly suggest on this. Will this resolve my issue?

any advise..?

How to fix Software Update Problem?

I was do some update includes new 10.5.1, iTunes, QuickTime, and many more, but today I test to check new update I got blank list and I was try to do via Terminal and got this message
Software Update Tool
Copyright 2002-2007 Apple
XML parser error:
Encountered unexpected EOF
Old-style plist parser error:
Malformed data byte group at line 1; invalid hex
What's going on? and How to fix it my Leopard Software Update Problem

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Apple Software Update entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install using an iTunesSetup.exe (or iTunes64Setup.exe) downloaded from the Apple Website:
http://www.apple.com/itunes/download/
Does it go through properly this time?

10.4 Server - software update server - push to clients

Hello all, after some advice.
Weve recently built up a 10.4.7 Server running among other services, Software Update. We've been successfull in pushing out managed pref's to clients to retarget their update server etc, updates are working so thats fine..
heres the issue. most of our mac clients arent admins, they are regular users, thus every time an update needs to install - it will prompt for an admin user's credentials, which we cant have happening.
Is there a way, to configure either the update server or the clients, to receive updates and install them silently for instance? with no user intervention?
One way im considering, its a bit messy though, is using apple remote desktop to issue a UNIX command to all selected Mac's, telling them to launch 'softwareupdate -i -r' and execute as root (afaik, you need to be root to execute softwareupdate manually or something) But this seems flaky in testing so far.
Thanks for any help.
Eliot.

Excellent thanks for the suggestions guys... Ive been playing with the cron suggestion to begin with, it seems to work, as in it will download and install recommended updates. Although with the particular update I was trying to install, it didnt seem to follow through correctly.
it was the latest firmware update for the INTEL iMac's, according to software update via the terminal, it had downloaded and installed the update, and then required a reboot. ok, but after reboot, it hadnt kicked into the firmware install mode. I actually had to download this update via the gui software update in order for it to function correctly, ie reboot, install firmware, reboot again. which is odd?? could be a problem for future updates like this, when using an automated cron task for updates? Or am I just missing something, hehe?
Otherwise yeah, the ARD option sounds interesting, we're about to purchase ARD3, definately worth a look.

Sccm 2012 R2 Software update problem

Hi,
I have 3 ADR's ADRWin7-1, ADRWin7-2 and ADRWin7-3
All three Run on Second tuesday of the month and has common Package. All three ADR's create a new group every time they run.
Schedule :
ADRWin7-1 Deployes patches to Phase1 collection on 2nd Tuesday
ADRWin7-2 Deployes Patches to Phase2 collection after 7 days of 2nd Tuesday
ADRWin7-3 Deployes Patches to Phase3 collection after 14 days of 2nd Tuesday.
Problem :
ADRWin7-1 works fine. PC's in Phase1 gets the patches without any problem. But Phase2 and Phase3 PC's are not getting the patches. I have moved PC from Phase1 to Phase2 collection, same problem. When in Phase1 collection it gets the patches and when moved
to Phase2, it does not.
Not much info from logs : (Sample logs)
WUAHangler.log :
Successfully completed scan. WUAHandler 8/15/2014 5:02:43 PM 1336 (0x0538)
Scan results will include superseded updates only when they are superseded by service packs and definition updates. WUAHandler 8/15/2014 5:02:43 PM 4488 (0x1188)
Search Criteria is ((DeploymentAction=* AND Type='Software' AND CategoryIDs contains 'BFE5B177-A086-47A0-B102-097E4FA1F807')) WUAHandler 8/15/2014 5:02:43 PM 4488 (0x1188)
Async searching of updates using WUAgent started. WUAHandler 8/15/2014 5:02:43 PM 4488 (0x1188)
Async searching completed. WUAHandler 8/15/2014 5:02:55 PM 3708 (0x0E7C)
Successfully completed scan. WUAHandler 8/15/2014 5:02:56 PM 1336 (0x0538)
Scan results will include superseded updates only when they are superseded by service packs and definition updates. WUAHandler 8/15/2014 5:02:57 PM 4548 (0x11C4)
Search Criteria is ((DeploymentAction=* AND Type='Software' AND CategoryIDs contains 'BFE5B177-A086-47A0-B102-097E4FA1F807')) WUAHandler 8/15/2014 5:02:57 PM 4548 (0x11C4)
Async searching of updates using WUAgent started. WUAHandler 8/15/2014 5:02:57 PM 4548 (0x11C4)
Async searching completed. WUAHandler 8/15/2014 5:03:04 PM 2608 (0x0A30)
Successfully completed scan. WUAHandler 8/15/2014 5:03:05 PM 968 (0x03C8)
CWuaHandler::SetCategoriesForStateReportingExclusion called with E0789628-CE08-4437-BE74-2495B842F43B;E0789628-CE08-4437-BE74-2495B842F43B,A38C835C-2950-4E87-86CC-6911A52C34A3; for leaves and E0789628-CE08-4437-BE74-2495B842F43B,A38C835C-2950-4E87-86CC-6911A52C34A3;
for bundles WUAHandler 8/15/2014 5:18:35 PM 4256 (0x10A0)
UpdatesHandler.log
Initiating updates scan for checking applicability. UpdatesHandler 8/15/2014 5:02:22 PM 1336 (0x0538)
Initiating updates scan for checking applicability. UpdatesHandler 8/15/2014 5:02:22 PM 3388 (0x0D3C)
Successfully initiated scan. UpdatesHandler 8/15/2014 5:02:22 PM 1336 (0x0538)
Successfully initiated scan. UpdatesHandler 8/15/2014 5:02:22 PM 3388 (0x0D3C)
Initiating updates scan for checking applicability. UpdatesHandler 8/15/2014 5:02:22 PM 1336 (0x0538)
Successfully initiated scan. UpdatesHandler 8/15/2014 5:02:22 PM 1336 (0x0538)
Initiating updates scan for checking applicability. UpdatesHandler 8/15/2014 5:02:22 PM 1336 (0x0538)
Successfully initiated scan. UpdatesHandler 8/15/2014 5:02:22 PM 1336 (0x0538)
Updates scan completion received, result = 0x0. UpdatesHandler 8/15/2014 5:02:41 PM 3388 (0x0D3C)
Updates scan completion received, result = 0x0. UpdatesHandler 8/15/2014 5:02:42 PM 4488 (0x1188)
Updates scan completion received, result = 0x0. UpdatesHandler 8/15/2014 5:02:43 PM 968 (0x03C8)
Updates scan completion received, result = 0x0. UpdatesHandler 8/15/2014 5:02:57 PM 3388 (0x0D3C)
Updates scan completion received, result = 0x0. UpdatesHandler 8/15/2014 5:03:06 PM 1336 (0x0538)
UpdatesStore.log
Update status from update (f61b102e-ce91-4086-94d0-fb199d7ce5ee) already exists, will modify existing instance. UpdatesStore 8/15/2014 5:03:06 PM 968 (0x03C8)
Update status from update (f6a9dfd6-91f2-449f-aef9-0d7f5f801d03) already exists, will modify existing instance. UpdatesStore 8/15/2014 5:03:06 PM 968 (0x03C8)
Update status from update (f7583494-fffa-4e41-99bc-1e4958f752f9) already exists, will modify existing instance. UpdatesStore 8/15/2014 5:03:06 PM 968 (0x03C8)
Update status from update (f76f5a9c-8325-4256-a632-654f153704b4) already exists, will modify existing instance. UpdatesStore 8/15/2014 5:03:06 PM 968 (0x03C8)
Update status from update (f802bfe3-9553-4542-bd1d-bdca38ff645c) already exists, will modify existing instance. UpdatesStore 8/15/2014 5:03:06 PM 968 (0x03C8)
Update status from update (f90253be-d178-4681-8ca9-71ac186b31f6) already exists, will modify existing instance. UpdatesStore 8/15/2014 5:03:06 PM 968 (0x03C8)
Update status from update (f92c8766-da08-4e0d-841d-1f36d3270cd3) already exists, will modify existing instance. UpdatesStore 8/15/2014 5:03:06 PM 968 (0x03C8)
Update status from update (f9ff6d98-1a01-437e-8728-f29cb8c71b13) already exists, will modify existing instance. UpdatesStore 8/15/2014 5:03:06 PM 968 (0x03C8)
Update status from update (fa090999-3b89-4dd1-82b2-6e16b0841e24) already exists, will modify existing instance. UpdatesStore 8/15/2014 5:03:06 PM 968 (0x03C8)
Update status from update (fbc9a192-a1d6-4008-8ea6-cd497b8b8668) already exists, will modify existing instance. UpdatesStore 8/15/2014 5:03:06 PM 968 (0x03C8)
Update status from update (fc7e731b-f4c9-44af-aaa8-952a614b4a64) already exists, will modify existing instance. UpdatesStore 8/15/2014 5:03:06 PM 968 (0x03C8)
Update status from update (fca3e05e-3bc0-4291-a675-9769042c9594) already exists, will modify existing instance. UpdatesStore 8/15/2014 5:03:06 PM 968 (0x03C8)
Update status from update (fda58512-32f3-4a5d-a5c4-05a193e037d4) already exists, will modify existing instance. UpdatesStore 8/15/2014 5:03:06 PM 968 (0x03C8)
Update status from update (fe2139b2-00f2-4eb3-8b28-d439e762967c) already exists, will modify existing instance. UpdatesStore 8/15/2014 5:03:06 PM 968 (0x03C8)
Update status from update (ff6cd189-1c49-4438-ac4e-34d988330e5f) already exists, will modify existing instance. UpdatesStore 8/15/2014 5:03:06 PM 968 (0x03C8)
Update status from update (ffbb4e7e-0edc-47fe-8c02-65211d2586fb) already exists, will modify existing instance. UpdatesStore 8/15/2014 5:03:06 PM 968 (0x03C8)
Successfully done with SetStatus() operation. UpdatesStore 8/15/2014 5:03:06 PM 968 (0x03C8)
Querying update status of 10 updates. UpdatesStore 8/15/2014 5:03:06 PM 1336 (0x0538)
Querying update status completed successfully. UpdatesStore 8/15/2014 5:03:06 PM 1336 (0x0538)
Querying update status of 14 updates. UpdatesStore 8/15/2014 5:03:06 PM 4548 (0x11C4)
Querying update status completed successfully. UpdatesStore 8/15/2014 5:03:06 PM 4548 (0x11C4)
Querying update status of 22 updates. UpdatesStore 8/15/2014 5:03:06 PM 2372 (0x0944)
Querying update status completed successfully. UpdatesStore 8/15/2014 5:03:06 PM 2372 (0x0944)
Querying update status of 12 updates. UpdatesStore 8/15/2014 5:03:06 PM 4488 (0x1188)
Querying update status completed successfully. UpdatesStore 8/15/2014 5:03:06 PM 4488 (0x1188)
Querying update status of 26 updates. UpdatesStore 8/15/2014 5:03:06 PM 4516 (0x11A4)
Querying update status completed successfully. UpdatesStore 8/15/2014 5:03:06 PM 4516 (0x11A4)
Querying update status of 10 updates. UpdatesStore 8/15/2014 5:03:06 PM 4368 (0x1110)
Querying update status completed successfully. UpdatesStore 8/15/2014 5:03:06 PM 4368 (0x1110)
Querying update status of 12 updates. UpdatesStore 8/15/2014 5:03:06 PM 1984 (0x07C0)
Querying update status completed successfully. UpdatesStore 8/15/2014 5:03:06 PM 1984 (0x07C0)
Querying update status of 1 updates. UpdatesStore 8/15/2014 5:03:06 PM 4296 (0x10C8)
Querying update status completed successfully. UpdatesStore 8/15/2014 5:03:06 PM 4296 (0x10C8)
Querying update status of 10 updates. UpdatesStore 8/15/2014 5:03:07 PM 4516 (0x11A4)
Querying update status completed successfully. UpdatesStore 8/15/2014 5:03:07 PM 4516 (0x11A4)
Windowsupdate.log
2014-08-15 17:03:03:963 924 1024 Agent   * Added update {801E75EC-F4EF-483C-B606-AB930EBF46B3}.202 to search result
2014-08-15 17:03:03:963 924 1024 Agent   * Added update {61BFE3EC-A1DC-4EAB-9481-0D8FD7319AE8}.100 to search result
2014-08-15 17:03:03:963 924 1024 Agent   * Added update {07D8D1ED-1E2A-4696-A20F-9EE6D983B0E6}.100 to search result
2014-08-15 17:03:03:963 924 1024 Agent   * Added update {B0CD9CEE-4C6B-4E2D-B4DA-1F83C4657C18}.104 to search result
2014-08-15 17:03:03:963 924 1024 Agent   * Added update {006666EF-3638-4ADC-8DA0-65F08E31A4C2}.102 to search result
2014-08-15 17:03:03:963 924 1024 Agent   * Added update {0CFB8DEF-9B7E-478C-A746-8F9F91311DB5}.103 to search result
2014-08-15 17:03:03:963 924 1024 Agent   * Added update {2EE7B9F1-22B7-4618-84B1-8F0804A2ED02}.101 to search result
2014-08-15 17:03:03:963 924 1024 Agent   * Added update {99EB2EF3-7266-4488-9A80-A49418A4D1D4}.201 to search result
2014-08-15 17:03:03:963 924 1024 Agent   * Added update {B34E43F5-2F06-4D9D-B147-EE76B076E9C0}.100 to search result
2014-08-15 17:03:03:963 924 1024 Agent   * Added update {AD752FF8-DF05-4532-84B2-FEFF2D98F689}.101 to search result
2014-08-15 17:03:03:963 924 1024 Agent   * Added update {5357F0F8-DC7C-467C-8D8D-EA4D6345260C}.200 to search result
2014-08-15 17:03:03:963 924 1024 Agent   * Added update {77507BF9-6899-47DF-96D0-2FFA53A90470}.101 to search result
2014-08-15 17:03:03:963 924 1024 Agent   * Added update {EFA1E1FA-3CAD-4098-94E7-571D00F5B3BA}.202 to search result
2014-08-15 17:03:03:963 924 1024 Agent   * Added update {ACCDC8FE-BC27-4473-9F35-BD9D0880B4D2}.101 to search result
2014-08-15 17:03:03:966 924 1024 Agent   * Found 192 updates and 8 categories in search; evaluated appl. rules of 313 out of 697 deployed entities
2014-08-15 17:03:03:972 924 1024 Agent *********
2014-08-15 17:03:03:972 924 1024 Agent ** END ** Agent: Finding updates [CallerId = CcmExec]
2014-08-15 17:03:03:972 924 1024 Agent *************
2014-08-15 17:03:03:990 3536 3c8 COMAPI >>-- RESUMED -- COMAPI: Search [ClientId = CcmExec]
2014-08-15 17:03:04:340 3536 3c8 COMAPI   - Updates found = 192
2014-08-15 17:03:04:340 3536 3c8 COMAPI ---------
2014-08-15 17:03:04:340 3536 3c8 COMAPI -- END -- COMAPI: Search [ClientId = CcmExec]
2014-08-15 17:03:04:340 3536 3c8 COMAPI -------------
2014-08-15 17:15:14:576 924 a98 Shutdwn user declined update at shutdown
2014-08-15 17:15:14:576 924 a98 AU Successfully wrote event for AU health state:0
2014-08-15 17:15:14:576 924 a98 AU AU initiates service shutdown
2014-08-15 17:15:14:576 924 a98 AU ########### AU: Uninitializing Automatic Updates ###########
2014-08-15 17:15:14:701 924 a98 Report CWERReporter finishing event handling. (00000000)
2014-08-15 17:15:14:717 924 a98 Service *********
2014-08-15 17:15:14:717 924 a98 Service ** END ** Service: Service exit [Exit code = 0x240001]
2014-08-15 17:15:14:717 924 a98 Service *************
2014-08-15 17:18:22:445 904 230 Misc =========== Logging initialized (build: 7.6.7600.256, tz: +0100) ===========
2014-08-15 17:18:22:445 904 230 Misc   = Process: C:\Windows\system32\svchost.exe
2014-08-15 17:18:22:445 904 230 Misc   = Module: c:\windows\system32\wuaueng.dll
2014-08-15 17:18:22:445 904 230 Service *************
2014-08-15 17:18:22:445 904 230 Service ** START ** Service: Service startup
2014-08-15 17:18:22:461 904 230 Service *********
2014-08-15 17:18:23:256 904 230 Agent   * WU client version 7.6.7600.256
2014-08-15 17:18:23:287 904 230 Agent   * Base directory: C:\Windows\SoftwareDistribution
2014-08-15 17:18:23:428 904 230 Agent   * Access type: No proxy
2014-08-15 17:18:23:521 904 230 Agent   * Network state: Connected
2014-08-15 17:18:36:498 904 e54 Report CWERReporter::Init succeeded
2014-08-15 17:18:36:514 904 e54 Agent *********** Agent: Initializing Windows Update Agent ***********
2014-08-15 17:18:36:514 904 e54 Agent *********** Agent: Initializing global settings cache ***********
2014-08-15 17:18:36:514 904 e54 Agent   * WSUS server:
http://SCCMserver.com:8530
2014-08-15 17:18:36:514 904 e54 Agent   * WSUS status server:
http://SCCMserver.com:8530
2014-08-15 17:18:36:514 904 e54 Agent   * Target group: (Unassigned Computers)
2014-08-15 17:18:36:514 904 e54 Agent   * Windows Update access disabled: No
2014-08-15 17:18:36:514 904 e54 DnldMgr Download manager restoring 0 downloads
2014-08-15 17:18:37:886 904 230 Report *********** Report: Initializing static reporting data ***********
2014-08-15 17:18:37:886 904 230 Report   * OS Version = 6.1.7600.0.0.65792
2014-08-15 17:18:37:886 904 230 Report   * OS Product Type = 0x00000004
2014-08-15 17:18:37:886 904 230 Report   * Computer Brand = VMware, Inc.
2014-08-15 17:18:37:886 904 230 Report   * Computer Model = VMware Virtual Platform
2014-08-15 17:18:37:886 904 230 Report   * Bios Revision = 6.00
2014-08-15 17:18:37:886 904 230 Report   * Bios Name = PhoenixBIOS 4.0 Release 6.0
2014-08-15 17:18:37:886 904 230 Report   * Bios Release Date = 2012-07-02T00:00:00
2014-08-15 17:18:37:886 904 230 Report   * Locale ID = 1033
2014-08-15 17:18:43:049 904 10f4 Report CWERReporter finishing event handling. (00000000)
2014-08-15 17:19:22:199 904 230 AU ########### AU: Initializing Automatic Updates ###########
2014-08-15 17:19:22:199 904 230 AU   # WSUS server:
http://SCCMserver.com:8530
2014-08-15 17:19:22:199 904 230 AU   # Detection frequency: 10
2014-08-15 17:19:22:199 904 230 AU   # Approval type: Pre-install notify (Policy)
2014-08-15 17:19:22:199 904 230 AU   # Auto-install minor updates: Yes (Policy)
2014-08-15 17:19:22:199 904 230 AU Successfully wrote event for AU health state:0
2014-08-15 17:19:22:199 904 230 AU Initializing featured updates
2014-08-15 17:19:22:199 904 230 AU Found 0 cached featured updates
2014-08-15 17:19:22:199 904 230 AU Successfully wrote event for AU health state:0
2014-08-15 17:19:22:199 904 230 AU Successfully wrote event for AU health state:0
2014-08-15 17:19:22:199 904 230 AU AU finished delayed initialization
2014-08-15 17:19:22:199 904 230 AU #############
2014-08-15 17:19:22:199 904 230 AU ## START ## AU: Search for updates
2014-08-15 17:19:22:199 904 230 AU #########
2014-08-15 17:19:22:199 904 230 AU <<## SUBMITTED ## AU: Search for updates [CallId = {081DAF36-6F30-4383-9B4F-3439B1869B38}]
2014-08-15 17:19:22:199 904 10f4 Agent *************
2014-08-15 17:19:22:199 904 10f4 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-08-15 17:19:22:199 904 10f4 Agent *********
2014-08-15 17:19:22:199 904 10f4 Agent   * Online = No; Ignore download priority = No
2014-08-15 17:19:22:199 904 10f4 Agent   * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1
or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2014-08-15 17:19:22:199 904 10f4 Agent   * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-08-15 17:19:22:199 904 10f4 Agent   * Search Scope = {Machine}
2014-08-15 17:19:29:982 904 10f4 Agent   * Found 0 updates and 171 categories in search; evaluated appl. rules of 337 out of 2240 deployed entities
2014-08-15 17:19:29:982 904 10f4 Agent *********
2014-08-15 17:19:29:982 904 10f4 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-08-15 17:19:29:982 904 10f4 Agent *************
2014-08-15 17:19:29:998 904 10f4 Report REPORT EVENT: {CD4756C6-2116-4B99-B2AD-C970D24DE94F} 2014-08-15 17:19:22:199+0100 1 202 102 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Content
Install Reboot completed.
2014-08-15 17:19:29:998 904 1108 AU >>## RESUMED ## AU: Search for updates [CallId = {081DAF36-6F30-4383-9B4F-3439B1869B38}]
2014-08-15 17:19:29:998 904 1108 AU   # 0 updates detected
2014-08-15 17:19:30:013 904 1108 AU #########
2014-08-15 17:19:30:013 904 1108 AU ## END ## AU: Search for updates [CallId = {081DAF36-6F30-4383-9B4F-3439B1869B38}]
2014-08-15 17:19:30:013 904 1108 AU #############
2014-08-15 17:19:30:013 904 1108 AU Featured notifications is disabled.
2014-08-15 17:19:30:013 904 1108 AU Successfully wrote event for AU health state:0
2014-08-15 17:19:30:013 904 1108 AU Successfully wrote event for AU health state:0
2014-08-15 17:19:30:029 904 10f4 Report CWERReporter finishing event handling. (00000000)
2014-08-15 17:19:35:020 904 10f4 Report CWERReporter finishing event handling. (00000000)
2014-08-15 17:22:35:006 904 10f4 Report Uploading 1 events using cached cookie, reporting URL =
http://SCCMserver.com:8530/ReportingWebService/ReportingWebService.asmx
2014-08-15 17:22:35:255 904 10f4 Report Reporter successfully uploaded 1 events.
Not sure whats going wrong??????????
When I checked the Deployment Monitoring Tool for the perticular test PC, the contents for the Patch deployments are blank (Have attached the image)
Thanks.

Let's start with that I think it's a very tricky method of deploying software updates. There is always a possibility that between phase 1 and 3 some updates are revised or even some complete new updates are available. That could cause differences (in for
example behavior) between your test clients and your other clients.
Back to your issue, it's hard to judge based on the log snippets. It looks like a function client and at the end I see something about 0 updates available.. Make sure that the software update group contains updates, the deployment is targeted to the right
collection and the content is all downloaded and available.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Leopard Software Update Problem

I know that this issue has been addressed in other threads, BUT I can't find any that yield a solution to the problem that I have.
When I try to run the Software Updater, I get the following message:
The file “index-leopard.merged-1.sucatalog” couldn’t be found on the server “swscan.apple.com”.
My internet connection is obviously working fine, so I have a hard time believing that there is a hardware problem.
People have eluded to an update that fixed this issue, but I've gone up to 10.5.1 and I still have the exact same issue.
Please help me resolve this!

I installed Leopard about 3 weeks (ish) ago, and I have been having his issue since the day I installed it.
One of the reasons I'm so concerned is because most people seem to have resolved this issue, but I still have it.
My updater doesn't even look for updates, as soon as it starts it gives me the error and I have to quit.

Software Update problem in Mountain Lion

Why do I keep getting "The operation couldn’t be completed. (NSURLErrorDomain error -1100.)" when checking for software updates?

There are many people suffering from this problem right now (including me). It appears to be a server issue. Just wait and try checking for updates again tomorrow.
Some things I have heard indicate that this may be a regional problem, though what parts of the world are affected I don't know yet. A few people have been helped by deleting the following preference file (paste the path into the Go -> Go to Folder window in the Finder to locate it), though most have not:
~/Library/Preferences/com.apple.SoftwareUpdate.plist

Can't connect to Server- Software Update

Hello everyone. I recently bought an eMac off of eBay and I wanted to do a software update, but when I do so it tells me that there was a network problem, so when I run the network diagnostics it tells me that while I'm connected to the internet, it can't connect to the server "boemac2.jackson.k12.ga.us"
I don't know what that server is, I'm using a cable router for my internet connection. But I really need help because it won't let me install newer programs such as Safari 3 without the latest security update.

I got the same message in the last few days on my iBook G4. It appeared after an update. I then found that Safari also failed to work but Firefox was OK. In addition I couldn't connect set up my wireless connection at home although my MacBook worked fine.
Go into System Preferences then Network. Have a look at Built-in Ethernet by clicking on Configure. Now look on Proxies. Has a tick mysteriously appeared on the Web Proxy (HTTP) setting and the FTP proxy set to 127.0.0.1? Mine certainly had altered despite the fact that the padlock symbol was clearly closed and no alteration should have been possible.
If you find it simply remove the tick and save the settings. Restart the Mac and with a bit of luck it should be resolved.

X6 Phone Software Update Problem

I had a Software Update on my X6. Started downloading it on a poor wi-fi connection. Connection was lost half way through and now I can not finish update. Any ideas?

sarah_tempest wrote:
I have a Mac and Nokia Updater isn't compatible
Doh! Well reading from Nokia's FAQ / help page...
http://europe.nokia.com/support/download-software/device-software-update/faq
17.
I get an error message when using my device to update. What should I do?"Remote server not responding"
Most likely your Nokia device cannot connect to the Internet or the server is not available. Internet connectivity problems may have several causes, such as a temporary network failure in the operator's network or Internet, or missing or incorrect access point settings for the device updates (or web browser) application. Remember that if your device supports it, you can also use WiFi to connect to the Internet and update.
You also need to have Update Server settings programmed into your device. These can be operator-specific settings (contact your operator for help), or standard Nokia settings as shown below:
Key *#0000# into your phone's home screen or go to Device manager (consult your user guide if necessary).
Select Options > Server profiles > Options > New server profile > Copy = No
Server Name
Nokia
Server ID
Nokia
Server password
firmupservpass
Access point
[select your preferred AP]
Host address
https://dms.update.nokia.com/dms/omadm
Port
443
User name
nokiams
DM password
nokiamspass
Allow configuration
Yes
Auto accept all requests
Yes
"Update cancelled by server" or "Update not allowed. Contact service provider."
Your Nokia device may not have been able to send a message requested or expected by the server, or your service provider does not allow updates. If that is the case, the server may close the connection. Wait a moment and try again. If unsuccessful, contact your service provider.
"Phone is being updated. Try again later"
The update sequence is active until your Internet connection is closed. Wait a moment and try again. Check that your Nokia device has no other Internet connections – for example, that you are not currently uploading or downloading anything other than this update.
"No network connection. Unable to download."
Remember that if your device supports it, you can also use WiFi to connect to the Internet and update.
Back to top
The only other thing I can suggest is to fully back up your X6, then do a factory reset, then try the OTA update.
S.
History: Motorola MR30, Nokia: 7110, 7650, N70, N80, N82, X6 (32GB), Samsung Galaxy SII
Current: Samsung Galaxy Note3 Black

Mountain Lion software update problem

I have purchased Mac book pro in July 2012. I wanted to download the Mountain Lion software update. I have redeemed the same from the Mac store. The downloading icon has appeared but it does not seem to be progressing...what could be the problem??

In the past, I have taken certain larger upgrades from apple at non-peak hours (magically everything was installed quickly) other times I have taken large upgrades from apple at peak hours ( I took forever and I questioned what is going on) this could be the issue. "server load" or your ISP (internet service provider)
* peak hours (when a lot of people are off work down loading the newest os or applications)

Software update problem : updates not found on 8088

Hello,
I recently found that when I performed an update on my clients they always reported Up to date. I then made them point to Apple's software update and they found that Itunes and a performance update was necessary.
So I tried to find what was wrong. My server seems to have downloaded all the latest updates (including ITunes and the performance update).
I disabled SoftwareUpdate and reenabled it.
Now my clients can't even connect to my Software Update server : the bar stays fix for a really long time.
When I look at the logs from my server : I see that a few products can't be downloaded :
Product 061-7024 will not be available for installation.
Unable to download or create .smd file for product
But maybe the main problem is that when I try to contact http://myserver:8088/
I dont see anything and when I try http://myserver:8088/index.sucatalog it begins to open the file but displays only the file's beginning. It keeps downloading the rest of the file really slowly (I think that's what makes the bar stays fix when I try to update).
Any clue ?
p.a

Hello again,
After a few more tests, I noted this.
Before restarting Software update, new updates weren't visible to clients.
After restarting Software update : Clients unable to connect to Software Update Server : bar stays fix for a very long time. In fact it appears to be a really slow connection to the server. After a few minutes the available updates appear (ITunes and Performance update). If I click to install them. Downloading begins but it's very slow 1k/s approximately.
I tried to untick Bandwidth limitation that was set to 1Mo/s. And after restarting Software Update, surprise : my clients can connect to SUS, see the new updates and download them at LAN speed.
Why did it work before ?
I tried to reset Bandwidth limitation to 1024k/s to see if it makes any difference. Yes when it's set, SUS doesn't work.
So really painful to work with this, almost no options to fine tune the update server and it's better to let all to defaults to avoid problems it seems.
p.a

10.7 server, software update problems

Similar Messages

Maybe you are looking for