10.8.5 and Mac Pro 5.1 - can I have 4k monitor?

Hi everyone,
I am not sure, so it's better to ask.
I have the previous model of Mac Pro (12 core 3.33GHz) with GTX 770 plugged in. The system is 10.8.5. Till now, I was using Apple Cinema Display HD 30", but I would like to change it to a better monitor with 4K resolution, if it will be possible. The question is, will it work fine with this card and under this version of OS?
I don't want to upgrade the OS, because well… I don't like how it looks like, so this version of OS is quite important for me.
The graphic card itself can run this resolution without a problem, but what a about the OSX? Everything will be OK?

Using 4K displays and Ultra HD TVs with Mac computers - Apple Support seems to say that with built-in hardware you are out of luck. You may be able to get special drivers from your videocard manufacturer. http://www.xlr8yourmac.com/ is a good place to learn about that.

Similar Messages

Can't Get MacBook Pro and Mac Pro to Network

I have a MacBook Pro (2008 - 2.5 Ghz. Core 2 Duo with 4 Gb of RAM running OS X 10.6.7) that I have been connecting to my Mac Pro (2005 - 2 2.66 Ghz Xeon with 20 Gb of RAM running OS X 10.6.7) through an Ethernet switch on my school's network. This has worked without a hitch for years, but when I upgraded to 10.6.7 recently, the MacBook and Mac Pro fail to network. On the MacBook Pro, the Mac Pro's icon doesn't show in the shared area, and on the Mac Pro, I can see the icon for the MacBook Pro, but when I click on the icon to connect, I get the message that "Connection Failed There was an error connecting to the server (name of my MacBook Pro). Check the server name or IP address, and then try again." I have tried a direct connect using the "Connect to Server" under the Go menu on both machines, using their IP addresses, but no luck. Is there something I need to re-set to get these two to talk again? I have other Macs on the same network that my MacBook and my Mac Pro can see, and both machines can connect to them. They just can't connect to each other.
Thanks in advance for any ideas you might have on how to fix this.

I fixed the problem by re-setting the default values for my VirusBarrier X6 anti-virus program.

How do I use the App store with macbook pro and mac pro

I currently use the app store with the mac book, but want to buy (share?) apps and music with the mac pro.
I can't find anything that specifically outlines how this works.
I use SplashID with the macbook and an iPhone, and want to use it (and sync it) on the mac pro as well.
If you buy apps for a macbook, can you use them on a second machine, or do you need to buy it a second time?

Your license from the MAS allows you to download and install the apps on as many Macs as you own or have under your control (institutional or employer supplied Macs.) The Mac should to be running Mac OS X 10.6.8 Snow Leopard or Mac OS X 10.7.2 Lion. Open the MAS app on the Mac Pro and sign into your account to have access to download all of your previous purchases in the Purchased pane.
Simple apps can also be dragged & dropped over a network connection from the MacBook to the Mac Pro.

If I put my 7300 in slot4 at 8x, and a 8800GT at slot1, 16x, could I boot 10.4.11 on my mac pro 1,1 if I unplug the monitor from the 8800GT?

If I put my 7300 in slot4 at 8x, and a 8800GT at slot1, 16x, could I boot 10.4.11 on my mac pro 1,1 if I unplug the monitor from the 8800GT?
I have different os's installed on my different hard drives. I'm using 10.6.8 now, but I go back to 10.5.8 and 10.4.11 on accasion. Can I run 10.4.11 with the 7300 in the 8x lane? As long as I unplug the 8800GT but leave it installed in the 16x slot1? And attach a monitor to the 7300?
What about using the 7300 to run extra monitors or a monitor while running 10.5.8 and 10.6.8? Is that a problem? I have 10GB Ram and the 1,1 original machine.

I know the 8800 requires 10.5.2, but if it is installed (at 16x) but no monitor is connected, will it allow the 7300 to control one or two monitors in 10.4.11? When the 7300 is in the 8x lane? And will it boot?
I lost part of your train of thought. Are you telling me to get just an ATI 5770 to continue using this machine into the future?
I thought the original mac pro 1,1 needed cards of the same manufacturer. If I use the 5770, that eliminates the ability to boot 10.4.11, correct?
What if I keep the 7300 handy in a box and put it in when I have to use 10.4.11? ( select the start up disc, shut down, change the card, restart) Does the 5770 require a power cable to another board that I might damage with repeated changes?

I bought a mac air retina to replace a mac pro. How can I get all files of the back up and copy them to the new mac?

I bought a mac air retina to replace a mac pro. How can I get all files of the back up and copy them to the new mac?

Mail window may be in the Full Screen mode.
Move the mouse pointer to the top right corner of the Mail window and hold it there.
Menu bar should drop down and click the blue double arrow icon.
Full Screen toggle shortcut: control + command + F

HP W2207H and Mac Pro (7300) portrait mode ?

I was thinking about getting the HP W2207H monitor as a second monitor hooked to a 1st gen Mac Pro w/ 7300 card.
Will this monitor work in portrait mode ?
Using Tiger currently will be Leopard soon.
Just curious if anyone has used this monitor ... Its the new one with VGA and HDMI built in
Thanks

I'm trying to use it with a G4 desktop mac...can't figure out how portrait mode works...
do I have to install a driver?
-Zzzz

Is it OK to use USB 2.0 connection for Glyph external drive and Mac Pro as project drive?

Is it OK to use a USB 2.0 connection for Glyph external drive and Mac Pro as project drive? I was told by Sweetwater tech support to use Firewire, but both the FW400 and FW800 connections crash my audio interface software mixer (Presonus' "Universal Control" software).
Both Firewire connections also create a 10 second hang for each Command-Save that I do.
USB 2.0 for the external drive seems to be working so far, but is there some reason I should be wary of using this as my go-to project drive? In other words, I am imagining that there was probably some definite reason that the tech support guy mentioned not to use it. But maybe not. It's a brand new Glyph. In any event, it's nice to have the 10 second hang eliminated, and I was just looking for some advice, since digging into the Presonus software issue could take some time.

If you have a mac pro, why not stick the external HDD inside via one of your many SATA cables & have it run 9 times faster than your USB?
Or stick a HDD CADDY in your mac pro, so you can slot in a full sized 3TB HDD for recording, and when you are done, pull it out & slip it in an external enclosure if you need to take it places?

I have Iphone 5 and mac pro, and i want to transfer pics through idrop. but my iphone not detect the mac pro. How i can turn the idrop on my computer?

I have Iphone 5 and mac pro, and i want to transfer pics through idrop. but my iphone not detect the mac pro. How i can turn the idrop on my computer?

The Mac Pro - the desktop computer - does not support Airdrop, if that's what you mean.
Matt

I have Outlook 2011 installed on my Mac Pro, but I can not install it icloud. I can only get through imail, iCal and Address Book in Mac native anyone know teach me how to work with Outlook 2011 icloud? thank you

I have Outlook 2011 installed on my Mac Pro, but I can not install it icloud. I can only get through imail, iCal and Address Book in Mac native anyone know teach me how to work with Outlook 2011 icloud? thank you

"iCloud requires iOS 5 on iPhone 3GS or later, iPod touch (3rd and 4th generation), iPad, or iPad 2; a Mac computer with OS X Lion; or a PC with Windows Vista or Windows 7 (Outlook 2007 or 2010 or an up-to-date browser is required for accessing email, contacts, and calendars). Some features require a Wi-Fi connection. Some features are not available in all countries. Access to some services is limited to 10 devices."
From here > http://www.apple.com/icloud/

Lacie Speakers and Mac Pro Firewire problem waking from sleep and loud feed

Lacie Speakers and Mac Pro Firewire problem waking from sleep and loud feedback. I had a powermac before this with the speakers and it worked fine. But the mac pro is having these issues. Is it the firewire port or the speakers or (and most likely) just a firmware glitch with mac pro? Anyone else see these issues?

http://web.mac.com/jerimydulay/Site/MyAlbums/Pages/Lacie_FirewireMIDI.html
Here is my audio settings. For some reason I wish I could remember what I did. It was actually the Apple Store tech in the Unversity Village in Seattle that gave me the idea and I swear I had to change the settings in MIDI setup. Now that Leopard is out it seems the MIDI stuff has been redone. I included screenshots of my MIDI setup as it is currently to see if you see something different on your computers. Let me know!

I opened my account on the MacAir and have the new Mountain Lion showing i purchased. When I open my account on my other two machines it does not show. Any suggestions on why or how to fix? iMac and Mac Pro Thanks

I opened my account on the MacAir and have the new Mountain Lion showing i purchased. When I open my account on my other two machines it does not show. Any suggestions on why or how to fix?
iMac and Mac Pro
Thanks

SADLY not as i downloaded an upgrad to my original PAGES/
i have in the meantim had to open www.icloud. then from there import the file that i am working on and then check on ipad if it uploaded/ yes it did.
but what a waste of time as it doesn not save any changes done automatically back in the cloud....
i am now downloading the new LION and hope that it will fix the problem
i cant find any other way. I was lead to believe that you wrote, it saved automatically, on to the cloud, you then opened anohter device in anotother country even, and the new file was there, waiting, in its latest version.......
and the same magic was supposed to happen in reverse.
It doesn't/
if i have to open a browser, go to www.icloud....why on earth did they not just leave us an icon to drop it in in that case?
I hope the new lion will help resolve the isssue/
any other ideas> keep em coming...thank you so much.

New to MAC - trying to sync iphone and Mac Pro with imac

Hi,
Just made the switch to Mac. Purchased my Mac Pro yesterday, loaded .Mac, and plugged in my iPhone to the computer. Followed the steps to Sync iCal and contacts from iPhone and although it is registering there is a phone and downloading photos, it is not syncing anything else.
The steps I took were System Preferences, .mac, and checked the relevant boxes. It indicates syncing is taking place but the calendar on iPhone and Mac Pro are not syncing.
Could anyone help with advice? SHould I be able to sync easily between the iPhone and the Mac Pro with .mac?

You use iTunes to sync an iPhone - not *.Mac Sync* or iSync.
*.Mac Sync* is for syncing between Macs, and iSync is for syncing third-party mobile phones and PDAs.
The iPhone specific forums are here:
http://discussions.apple.com/category.jspa?categoryID=201

Sony hard drive camcorder and mac pro

i have a sony hard drive style camcorder that uses a usb to download to a computer.will the mac pro support this if i use windows on it or is the usb still going to be a hang up?no editing needed,just want to get the movies on my mac instead of a pc.are there any programs that will let me use the usb port?

.would i be able to make it work if i install the program that came with it on the windows side of the mac pro?
you mean, you have bootcamp/parallels/etc on your Mac and want to use a Windows app to handle your camera?.. well, no hands on with Windows nor Bootcamp here...
Windows is a system of many (too many for me... ) options...- which usually needs 'drivers' for any connection to the real world outside the computer.. I mostly doubt, that the usb2 port is supported by a video-edit-app in a Windows app... as mentioned above, the 'computer' has to recognize your device as a harddrive, incl. all the 'protocols' which are needed to 'speak with each other'.. (= all that is implemented in firewire... usb = no standards for that = 'individual drivers'...)
but, why no givin' it a try...?
next problem: you're using Windows to import from your device.. and then? Windows asks for a fat32 formatted drive.. which iM doesn't support ...
besides, there's a 3rd party app for Mac, which supports mpeg2 editing:
http://www.pixela-1.com/captympeg_editex/
summary:
iLife ≠ harddrive corders...

MyBook Studio Edition and Mac pro

So i got my Mac Pro today and have my MyBook Studio Edition 500GB hard drive with about 90GB of stuff I need to transfer over. Doesn't seem to be anything wrong with the MyBook, but when I attach it to the Mac Pro, it won't mount. The ports recognize that there's something there, but not the drive. Am I out of luck? I had only intended on keeping this drive long enough to dump my files, but now I can't even do that. I tried it in the firewire, firewire 800 and USB ports. Someone mentioned updating the firmware, but how can I do that if the drive isn't being recognized?
I also can't seem to force power down the MyBook. If I hold the power button in, it just stays on.
Any suggestions?

You can of course read what the button does from Apple.
http://docs.info.apple.com/article.html?artnum=304123
http://www.apple.com/support/macpro/
http://developer.apple.com/documentation/HardwareDrivers/Conceptual/MacPro_0608/Articles/M43_0906arch.html
Others have said that the button manager doesn't work with Leopard.
And if you just got the Mac Pro, you should have 10.5.1 and the original system (hopefully cloned before doing anything) and only done fresh install where needed with latest Leopard compatible programs.
WD firmware: read and see if this applies -
http://support.wdc.com/download/index.asp?cxml=n&pid=21&swid=65
A Mac Pro needs to have the boot drive as GUID. If you are using or have the original boot drive it would have to be GUID. If you happened to merge your system from the G5 onto the Mac Pro's system, you could have problems.
Some G5s are happy with GUID, but native format is of course APL.
Formatting http://docs.info.apple.com/article.html?artnum=306932

HT201380 keep having scrolling problems with Maverick on both iMac and Mac Pro despite downloading mail software update

Have scrolling problems with Maverick despite downloading mail update on both IMAC and Mac Pro
Have to reboot and it helps for awhile then stalls again

The Mac OS X 10.4.7 Update introduced connection issues as a result of (according to the documentation) "Mail now supports connecting to mail servers through a SOCKS proxy". This probably has nothing to do with your problem, but it'd be worth going to System Preferences > Network and making sure the SOCKS Proxy is not enabled in the network configuration used to connect to the Internet.
Also, it looks like the crashes you're talking about are actually freezes, i.e. Mail becomes unresponsive rather than quitting unexpectedly. In Mail, open Window > Activity Viewer, and see whether Mail displays there what it's doing when it freezes. Actually, you may be able to avoid having to force quit Mail by canceling whatever it's doing (by clicking on the red stop icon of the activity).
Reinstalling Mail will probably accomplish nothing, but it might be worth reinstalling the Combo Update for the type of machine and the version of Mac OS X you're using (which you would have to do anyway if you wanted to reinstall Mail):
Mac OS X 10.4.7 Combo Update for Intel
Take a look at the following articles for guidelines on how to properly install system updates:
Troubleshooting installation and software updates
Installing software updates
Basically, you should verify/repair the startup disk before installing the update, and no applications should be running while installing it.

10.8.5 and Mac Pro 5.1 - can I have 4k monitor?

Similar Messages

Maybe you are looking for