10.9.1 Wont Install
I've tried to install the update through the app store and from the direct apple download, both were unsuccessful. Updating through the app store causes there to be an error message during the restart (says the download is faulty or corrupted). The direct download it says "invalid checksum" when I try to open it. Please help
Same same for me, also tried under a safe reboot. Any advcie appreciated
Similar Messages
-
CS4 Master Collection wont install on Vista Ultimate 64-bit.
Im using my friends cs4 disc's wich he doesent use any more (switched from windows to mac) and it wont install
full quality image atached if you cant read this one.This is a very close friend we've been working together since high school. but other than that dont you have any ideas whatsoever?
or is there any way to skip the system profile check, cause i'm prity sure my system is more than adiquate to run cs4
3.16ghz duo core, 4gb ram, 1gb ati radeon his hd4670. -
Hi
I turned on my laptop this evening to import a new cd but it asked me if i wanted to download the new version of itunes so i went ahead to update it but it failed to update then it failed to open at all, and and runtime error keeps popping up but when i uninstalled it to reinstall it it wont install now and i cant use my ipod or ipad with my laptop without itunes and i never had this problem at all. can you please help?Hey maryncomiskey,
Thanks for the question. I understand you are experiencing issues with the latest iTunes update. The following resource may help to resolve your issue:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Additional Information:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567
Thanks,
Matt M. -
Hi i am trying to install itunes and it wont install due to error code 2349 how do i fix this issue
i have tryed on numerous occasions to install itunes and it sometimes installs but then i cant use it due to error code 2349, so i uninstall and try again and wont install it at all due to error code 2349 please help i really eant to use my ipod
Refer to this thread:
https://discussions.apple.com/thread/3174150?start=0&tstart=0 -
iTunes wont install. It says "The program can't start because MediaAccessibility.dll is missing from your computer. Try reinstalling the program to fix this problem." I have uninstalled iTunes 5 times and reinstalled it, and nothing has worked. Help!!!!
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99683) -
hi im having huge problems trying to install flash for my mac 10.5 imac, iv gone through the internet and tried all of the solutions, everytime i try to install flash it says cant read the download file, or it just wont install, anybody plz help!
iv unistalled flash, iv checked plug ins it just wont work,It would have been a great help to know precisely what Mac you have, so some of the following may not apply:
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*. The latest version,10.3.183.23 or later, is for Intel Macs only running Tiger or Leopard, as Adobe no longer support the PPC platform. Version 11.4.402.265 or later is for Snow Leopard onwards.
(If you are running Mavericks: After years of fighting malware and exploits facilitated through Adobe's Flash Player, the company is taking advantage of Apple's new App Sandbox feature to restrict malicious code from running outside of Safari in OS X Mavericks.)
* Unhelpfully, if you want the last version for PPC (G4 or G5) Macs, you need to go here: http://kb2.adobe.com/cps/142/tn_14266.html and scroll down to 'Archived Versions/Older Archives'. Flash Player 10.1.102.64 is the one you download. More information here: http://kb2.adobe.com/cps/838/cpsid_83808.html
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications (including Safari) first before installing. You must also carry out a permission repair after installing anything from Adobe.
After installing, reboot your Mac and relaunch Safari, then in Safari Preferences/Security enable ‘Allow Plugins’. If you are running 10.6.8 or later:
When you have installed the latest version of Flash, relaunch Safari and test.
If you're getting a "blocked plug-in" error, then in System Preferences… ▹ Flash Player ▹ Advanced
click Check Now. Quit and relaunch your browser.
You can also try these illustrated instructions from C F McBlob to perform a full "clean install", which will resolve the "Blocked Plug-in" message when trying to update via the GUI updater from Adobe.
Use the FULL installer for 12.0.0.44: Flash Player 12 (Mac OS X)
And the instructons are here: Snow Leopard Clean Install.pdf
(If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, try the following solution which fools the site into thinking that you are running the version 11.5.502.55:)
Download this http://scriptogr.am/nordkril/post/adobe-flash-11.5-for-powerpc to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work. -
ITunes will download but wont install on windows 7 64-bit computer.
I got this computer a few weeks ago and first thing i tried to install was iTunes off of the apple site and it wont install.
i can download the setup file to my computer and save to my documents but when i right click and click run as administrator, a loading sign will appear for two seconds then disappear... i need iTunes on this computer since it wouldnt install on my old laptop. i've even tried installing on safe mode and nothing. i just want iTunes on my computer.. any help?Same issue here and unfortanetly no one yet has an answer...
-
I have downloaded an app on my phone. My husband tried to download the same app on his phone but he used the same apple id as me and it said the app was already installed on another phone and wont install even using a new apple id on his phone. HOw do we get this app onto his phone?
You got the new iphone????? I have same problem. I transferred audiobooks to device to find no audiobooks on device (despite it being in iTunes as if it was). Have you found a solution????? I even tried to change import settings on format transfer but hasn't worked.
-
HELP!! Itunes wont install on Windows 7. I get an error msg. there is a problem with this windows installer package. A program required to install to complete could not be run. Contact your support personnel or package vendor. WHAT NOW?
Ok, Below is what worked for me somewhat.
Okay ... try downloading and saving a copy of the iTunesSetup.exe to your PC from the Apple website:
http://www.apple.com/itunes/download/
Now download a trial version of WinRAR:
http://www.rarlab.com/download.php
Open the iTunesSetup.exe with WinRAR, and try to run the standalone install of Apple Application Support from the AppleApplicationSupport.msi you find in there.
It works now BUT there are still problems. It is not allowing or recognizing my Cd/DVD player and i CANT burn. Looking still for this fix. -
Hi itunes wont install windows error 2 keep popping up what do i do?
hi itunes wont install windows error 2 keep popping up what do i do?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
ITunes wont install on Windows 2000
i have been trying to get iTunes to install on my computer for a few weeks now and have not been able too. I took my computer to Best Buy to have them install it and they said that the reason it wont install is because i have alot of spyware and virus, they wanted to charge me $80 to get rid of them so i told them thanks but no thanks.
I was hoping that someone out there can tell me which spyware or virus is blocking the installtion of iTunes and how i can get rid of it, i downloaded spybot and updated my norton but i still cant get iTunes to load please someone help me find and destory the programs so i can get iTunes loaded!!!
Thanks
Goodyhiya!
updated my norton but i still cant get iTunes to load
is that Norton Internet Security 2005? are you getting absolutely no error messages whatsoever when you try to launch your itunes?
if so, let's also try giving the trusty Lorraine M technique a whirl:
Lorraine M: NIS/itunes problem rectified
love, b -
ive tried to update my itunes and it wont install i get an error message saying
Service apple mobile device failed to start. verify that you have sufficent privilages to start system services
help pleaseHello Karl,
Thank you for the details of the issue you are experiencing with installing the latest iTunes update. I recommend following the steps below as an administrator:
Resolution
Follow these steps to resolve the issue:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
When you get to the step to uninstall iTunes, it is important to uninstall iTunes and the related components in the order listed in the link for that step.
You can find the full article here:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
I recommend the following article if you continue to receive an error:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Itunes wont install, please help
I know this issue has been raised several times and I have read most of the posts and still cant fix the issue. I have updated Itunes today and since trying to update it I can now longer load it. I have tried uninstalling everything about 10 times now and then reistalling but it dont work. If I click on the Itunes logo it comes up with the message itunes.exe is missing and the apple software update wont install either. To top it all off I needed to restore factory settins on my iphone but because of the itunes crash and the fact that I cant reinstal anyting I cannot do this so am without a phone now. I am now at the end of my tether after spending about 7 hours trying to rectify the issue so I could really do with some advice? I have tried the repair function but this has done nothing either!
This morning I have uninstalled everything again and tried to individually install all the parts, quicktime and itunes comes up with the warning fatal error during installation or someting similar and the apple softwareupdate still does not install.
-
Itunes wont install on vistax64
i tryed to upgrade it but that failed so i tryed to uninstall and then try to reinstall but no it has an error and wont install at all i need help
its says
the installer encountered errors before itunes could be configured.
your system has been modified. to retry these operation at a later time, please run the installer againi got it to worked i close some of the system tray icon i do believe i closed my virus protection and xfire
-
HT2376 Trying to install scrapbook software but wont install due to quicktime
I recently tried to install Software Scrapbook Boutique on my MAC Pro OS X Version 10.7.4 and all the files wont install without Quicktime. I have Quicktime Version 10.1, and it won't work. I am administrater, I recently bought my laptop from a friend whose friend needed money to get out of town, so he's gone.
This is my first Mac so it anyone can help I would greatly appreciate it. I just want to know what I'm doing wrong and how to fix this. Thank you.the specification for Scrapbook is QuickTime version 7.5.0 or higher and you candown load it here:
Quicktime 7 for Mac -
itunes wont install it is install just wont open it says a problem has occured and has to close....thats it ? can anyone help me
top fixes for a new iTunes install/upgrade are
- turning off security software such as Norton before the install as Apple suggests
- installing QuickTime standalone, not regular
http://www.apple.com/quicktime/download/standalone.html
- setting up Norton to allow iTunes
- scanning for malware with ewido (Free at www.ewido.net/en/)
- last but not least, using MSCONFIG to find Windows conflicts
http://docs.info.apple.com/article.html?artnum=302538
Post back with any questions or your solution.
Maybe you are looking for
-
Major crash happening with icloud
three visits to the genius bar and 3 phone calles to senior advisor and no answer to my problems Whats wrong with this picture. having a meltdown on iphone and imac at same time-I cloud people supposedly are getting backto me but 2days gone by and no
-
Item Categories Display in Contract
Dear All, In my contracts 1) In the development I am able to see the item categories ( through F4) assigned to that contract Type (No Restriction). 2) While in Production I am not able to view any Item categories ( through f4) unless I enter material
-
Running Captivate 8 on a Macbook and I am unable to import Powerpoint 2011 (which is up to date) files or slides. I get an error saying that either the file is damaged or I am using an older version of PP....which is not the case. I tried creating
-
Office 2010 and windows 7 not save power point presentation ?
I am opening Power point Presentation 2010 then internet gives me 3 options , open , save, cancel. If i save Power Point Presentation then i will save it to drive location. after some modification and saved back to presentation. i have user power poi
-
Intalling Workshop beta - license expiration message for server
I downloaded the file "wlworkshopbeta_win.exe" on 4/30/02 and just installed it. An attempt to start the Weblogic server results in: $$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$ Unable to start WebLogic Server!! WebLogic: license has expired o