1042N-A-K9 Default Username and Password

I just recieved in the mail an aironet 1042n ap. It was assigned an ip of 192.168.1.254 by my router. When I attempt to connect it prompts for a password and states the default username and password is admin and 1234. It will not except this, or Cicso and Cisco, or cisco and cisco. Does this mean it's doa? Any ideas? Also does this require a wlan controller?
http://www.newegg.com/Product/Product.aspx?Item=N82E16833120659

Have you tried via the serial port?
The config guide says Cisco/Cisco on the HTTP server, but I've seen the admin / Cisco before.
http://www.cisco.com/en/US/docs/wireless/access_point/1140/autonomous/getting_started/guide/ap1140aut_getstart.html#wp35957

Similar Messages

Default username and password Oracle Hyperion workspace/shared services

Hi Friends,
I had installed Install Oracle Hyperion Planning, Fusion Edition Release 11.1.1.3.0 (foundation services and planning)
but i am unable to login to workspace,shared services
what is the default username and password for these.Please let me know?
Regards,
DB

Hi,
Default Admin user is: admin and default PW: password.
If you have not yet changed.
Thanks
Focusthread Hyperion Trainer
[http://focusthread.com/training]

BPM Default username and password

Hi Experts,
Will anyone please help to find the bpm composer default username and password to log into bpm composer. i installed bpm and trying to login with weblogic/welcome1. response is invalid ID and password. please help me out.
Thanks
SN

Usually you have to set the standard weblogic username and password at install time. Common "default" combinations are weblogic/weblogic1, weblogic/welcome123, weblogic/welcome1, weblogic/oracle, weblogic/oracle123. But there really is no "default" as it is dependent on whatever you have indicated during the install. Many prebuilt VMs from Oracle will use one of the combinations that I mentioned though.
But if none of those work, you can change the weblogic password in WLS console --> Security Realms --> myrealm --> Users and Groups as already mentioned by the previous reply.

Aironet 1100 Default Username and Password not working

I have a Cisco Aironet 1100 series access point (AP1120B) that after resetting to factory defaults the default username and password (Cisco and Cisco) aren't working in the web GUI. I am able to telnet to the AP's IP and log in with Cisco and Cisco but don't know the ENABLE password. I have tried Cisco and cisco and everything else i could think of with no luck. any help would be appreciated.
I also have a Cisco Aironet AP1242AG that is doing the same thing.

Hi Rich,
I assume that you are using the mode button to reset the configurations on these units -- this procedure *should* reset all credentials to Cisco.
If this is still not working, you can try the following:
1) Connect console port and power-cycle unit
2) When IOS starts loading, hit ESC key twice to get to the boot-loader prompt
3) At the boot-loader prompt show a directory of the flash filesystem (dir flash:)
4) Delete or rename the files "config.txt" and "env_vars", then boot the system ("delete flash:/config.txt" "delete flash:/env_vars")
-Patrick Croak
Wireless TAC

Default Username and Password for Sample Packages

Hello,
What is the default username and password for sample packages mentioned in this article for all the sample packaged applications?
http://www.oracle.com/technology/products/database/application_express/packaged_apps/packaged_apps.html#PACKAGED
Regards
Edited by: user20090209 on May 19, 2010 1:37 PM

Hi,
Try same user name and password as you login to your workspace.
Most of applications use Application Express authentication
Br,Jari
Edited by: jarola on May 19, 2010 9:06 AM
And when you have downloaded and installed application to your workspace, you can always change authentication

What is the default username and password for administering my f4500 deskjet printer?

I need to administer my F4500 Deskjet through my web browser, but do not know the username and password. I presume there is a way to default the settings, but I need to know the defaults. Please provide the default username and password for web access.
Thanks.

The default username is Admin, but the password is blank by default. Somehow, a password was added at some point.
You can try going to the EWS and going to Settings and looking for a password reset option in the Administrator Settings section. If it is there, it will be the only way I know of clearing the password on this particular printer.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Default username and password for WLC 5508 series

Hi ,
please let me know the default username and password for the below WLC device
Model :
AIR-CT5508-100-K9
Image : AIR-CT5500-K9-7-0-230-0.aes
Regards
Lerner

Password Recovery in WLC versions 5.1 and later
If you forget your password in WLC version 5.1 and later, you can use the CLI from the serial console of the controller in order to configure a new user name and password.
After the controller boots up, enter the Restore-Password command at the user prompt. This command is only accepted for the initial user login and becomes disabled after a user logs in. You are prompted to enter a new username/password, which can then be used to log into the controller and modify settings.

Default username and password for BPEL Console

What is the default username and password for BPEL Console?

Hi,
can you provide the version which you have installed?
10.1.3 / 10.1.2?
Advanced installation?
oc4jadmin or bpeladmin as user
welcome or welcome1 as password (i do not remember exactly)

Default Username and password for CCM DC-Directory Admin

What is the default username and password for accessing dc directory for callmanager ?
TIA

Hi Zufi,
It should be;
Log in as Directory Manager. The password by default is ciscocisco.
Hope this helps!
Rob
Please remember to rate helpful posts........

OC4J 1.0.2.2.1, connection pooling, and over-riding the default username and password

We are using OC4J 1.0.2.2.1 and connection pooling with data-sources.xml
In data-sources.xml, we have specified the default username and password.
However, there are situations where we will want to use a different username and password and still use the connection pool. For example:
public static Connection getConnection(String aUserNameS, String aPasswordS) {
Connection conn;
try {
InitialContext ic = new InitialContext();
DataSource ds = (DataSource) ic.lookup("jdbc/ejb/OracleDS");
conn = ds.getConnection(aUserNameS, aPasswordS);
} catch (Exception ex) {...}
return conn;
Will this work? I mean, is it possible to specify a different username and password in the JNDI lookup and have it over-ride a provided default username and password in data-sources.xml?
Thanks,
Ed

This may be problem with your userid/password. Please look the $OC4J_HOME/j2ee/home/config/principals.xml whether you have a right userid password.
I did a quick test at looking up at "jdbc/OracleDS" for two users admin and SCOTT and this works fine both in 1.0.2.2.x an 9.0.2
I got your errors when I had wrong passwords for these users
regards
Debu

WSN 1.2 NI 9792 Security: Initial Setup? Default Username and Password?

Hello,
With NI WSN 1.1, using a 9792, I can click the Set Permissions button and if none had been set it would simply ask me for a new administrator password. Now, with NI WSN 1.2, when I click on the Set Permissions button it takes me to the 9792's web interface and says "Either no one is logged in or you do not have permissions to view/edit users, groups, and permissions." When I click the Login button, a box pops up and asks me for both a username and password. I scoured the release notes, help files, and the internet and it seems there is NO documentation on how to setup the very first username/password combination nor does it state what default username/password combination there might be. I also tried a brand new 9792 straight out of the box and loaded 1.2 on it and it has the same issue. Is there something obvious that I'm missing? How does someone initially set up security on the 9792?
Solved!
Go to Solution.

Hello Garrett,
Thanks for your post!
It looks like you are needing information on how to find out the log in information of your 9792. When using NI-WSN 1.1 we allowed users to set the initial password and this is still the case for the 9791. The 9792 is a NI-WSN node gateway as well as a LabVIEW Real Time target. Its default log in information can either be found in a Knowledge Base (KB) the LabVIEW help or MAX help. Are you using LabVIEW 2009 SP1 or LabVIEW 2010?
The default user name and password is the following:
username: admin
password: <blank>
KB
Default Username and Password to Log into a Real-Time Controller
http://digital.ni.com/public.nsf/allkb/14D8257A7724BE85862577F90071B73F
LabVIEW Help
Start >> All Programs >> National Instruments >> LabVIEW xx >> LabVIEW help
then go to .. Fundamentasl >> Working with Prjects and Targets >> How-To >> Monitoring and Configuring a Remote Device from a Web Browser
MAX Help
Open MAX >> Help >> MAX Help (can also press F1 in MAX if open)
then go to .. MAX Remote Systems Help >> LabVIEW Real-Time Target Configuration >> Device Configuration >> Logging into your System
The LabVIEW help link above is called out in the 9792 getting started guide under Related Documentation that directs you to the LabVIEW help.
NI Wireless Sensor Network Getting Started Guide
http://www.ni.com/pdf/manuals/372781c.pdf
Is this the information that you were looking for? Please indicate if there is anything else we can do.
Cheers
Corby
WSN R & D PSE

Log in with default username and password

Is there a way to create a pdf so that it automatically logs in with a default username and password so that the user is not prompted upon opening?

No, there is no way set a default user name and password, but as an alternative you can set your policy to be "Anonymous Access", meaning that there is no authentication (of the user) required to open the document, but you can still control (i.e. prevent printing) what the "anonymous" user can do to\with the document.
Regards
Steve

What is the default username and password for a Airport Time Capsule 3TB

What is the default username and password for a Airport Time Capsule 3TB

There is no default user name on any of the AirPort routers, but the default password is......
public

What is the default username and password for SR520

What is the default username and password for SR520.
Thanks

The default username is admin. The default password is admin. Some good info on (lab 7A):
https://supportforums.cisco.com/docs/DOC-9646
Marcos Hernandez
Technical Marketing Engineer
Cisco Systems, Inc.

HP8600 default username and password

I have a HP8600 officejet Pro and I am trying to setup scanning to a network folder. It keeps asking for a username and password. To my knowledge, there has never been one setup.
Can someone tell me what the default username and password is please?
Many thanks

Hi @stevenjohn,
Welcome to the HP Forums!
I understand that you are trying to setup scan to network folder on your HP Officejet 8600, and it is asking for a username and password. I am happy to look into this for you!
Please take a look through this guide, Scan From the Control Panel (Including Scan to Email, to a PDF, and to a Network Folder) for HP Offi.... According to this guide I believe it is your Mac's username and password, that you use to log on to the system. You will need to have full administrative rights to the folder you create as well.
Hope this information helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

1042N-A-K9 Default Username and Password

Similar Messages

Maybe you are looking for