-108 Error on Export from FCP X Trial

So I'm trying to export movie so I can make a test DVD (using other programs, of course, to make it properly anamorphic SD & add chapter markers), but near the end of the export I get the following error: The operation could not be completed because an error occurred when encoding frame 77233 (error -108).
Doing the math, as I can't find a way to show frame numbers, this seems to be near the end of my timeline, but NOT the very end, and there doesn't seem to be anything special going on there. Have trashed preferences, etc. and restarted, get the same message. Have exported parts of this before without trouble. Haven't seen anyone else with this error number so just curious, and of course annoyed. I am using the latest trial version, debating whether to pay to move from FCS 3. Not impressed with the instability.

I'm having the same issue happen time after time after updating to the Maverick operating system, and particularly I'm working on exporting an hour and 20 minute movie right now that continue to get the same error everytime.
In preferences, under editing you can change the display to frames instead of the timecode. However when I go to the frame that it errored on, nothing's wrong with the clip. It was right in the middle of a transition, so I deleted the thing and applied another transition, and nothing.
I even tried what you should try. And that is copying the entire timeline into a new fresh timeline and then export. It SHOULD work, but it isn't working for me. About to throw my 27" in the trash.

Similar Messages

  • Error when exporting from FCP

    When I try and export to Compressor(1.2.1) from FCP HD 4.5 i get an error saying that a file of this name already exists (obviously not the case). The Batch then fails within 5 secs or so. Could this be a restriction on the academic version of fcp or something - ie one can only export a project x many times or something? i've seen the related string but turning off anti-virus software doesn't seem to help me at all. any ideas?
    also - I can export as a self containded qt file but even if I do it at the highest settings the finished dvd (made using dvd studio4) doesn't look as good as an old dvd i have that was encoded by exporting to comp. from fcp. is it just my eyes having seen the video so many times that i am seeing things or has anyone else noticed this?

    there's also reports of incompatibility with compressor3:
    http://discussions.apple.com/thread.jspa?messageID=4968107&#4968107

  • XL-H1 aspect ratio error when exporting from FCP 1080p24 to compressor

    PLEASE HELP
    I have a finished project in fcp in a 1080p24 project.
    My source footage is 1440 x 1080i 24f from an xl-h1.
    When i export from final cut pro to compressor, compressor squeezes my footage into a square.
    if i export to dvd from compressor the ratio is fine.
    when i export in quicktime thats where the skewed image happens.
    Please help
    thanks

    Hi StingoArmy,
    There is an easy fix for this. Once you export your file to Compressor, you can apply an export option, let's say we're going to export a LAN Streaming Quicktime movie for Internet. Now click on the new bar that's been placed inside your media tab. The settings for this export item appear below in the Inspector. Just below the DESCRIPTION line are a series of options buttons. Clicking the option 2nd from the right (Geometry) opens up a new tab where you can change the dimensions. There are several ways to go about exporting to 16:9, the one I use is to change the Frame Size to "Custom (16:9)", however, you can also do the same thing by changing the Pixel Aspect to "HDV 1080i (16:9)" You should test results for both and see which is the preferred method for your final output, depending on what type of Quicktime movie you are creating.

  • QuickTime error when exporting from FCP 4.5 - Compressor

    I'm still on Final Cut Pro 4.5, waiting to get money for a hardware upgrade before I can move to FCP 6, etc.
    I have upgraded to QuickTime Pro 7.2.
    This setup worked fine until today.
    I selected a sequence in FCP and tried to Export to Compressor (the source material was NTSC MiniDV video footage in FCP) using an MPEG-4 Fast Cable Streaming 320x240 export setting. I used this setting successfully to export a very similar project only last week. This evening when I tried exporting via Compressor the attempt failed, and Batch Monitor's log noted a "QuickTime Error -50". I tried this repeatedly this evening, and it produced the same results even after restarting the machine.
    I'm baffled by this. I had no such problem last week.
    Any clues?

    there's also reports of incompatibility with compressor3:
    http://discussions.apple.com/thread.jspa?messageID=4968107&#4968107

  • Can't open quicktime movie that I exported from FCP 5. Help!

    Can't open quicktime movie that I exported from FCP 5. Help!

    What arrow?
    Have you tried opening the file in FCP?
    If there is no error message and it will not play in QT7, it is quite possible the file is corrupted. You will need to go back to the original project and re-export the file.
    x

  • Problem exporting from FCP using compressor

    Out of the blue - I'm getting batch failures trying to export from FCP for use in a DVD. Immediately after selecting compressor for export, I get an error reading "That file already exists", and a new tab appears in the media browser with a lengthy character string. Compressor opens fine, and I select Best Quality 4:3 encoding for video and aiff48 for audio. When the batch is submitted - it promptly fails and blames FCP for generating an error.
    Did all kinds of restarts and work arounds to no avail. The promising news is that this error seems to occur only when exporting from FCP through Compressor.
    My work-around is to export a QT movie of the piece, quit FCP, launch Compressor, and then import the QT for batching.
    Hope this helps anyone else in similar situations
    Martin
    G5 PPC   Mac OS X (10.4.8)   FCP 512 post production

    Hi:
    How long is your movie?
    The best workflow is FCP > Compressor > DVDSP.
    You can encode your timeline directly to get MPEG2 video and Dolby 2 (AC3) audio files. Then import those in DVDSP and author your DVD.
    Using Compressor you control the full encoding process. You can test with small parts of your movie (those where you got problems with iDVD) and find the best encoding options fopr your footage.
    Of course the DVDSP learning curve is longer than iDVD but once you learned ir you probably never go back. Like iMovie and FCP.
    To give you detailed info about what encoding settings to use you must post some info about your FCP project.
    Hope that helps !
      Alberto

  • Best way/settings to export from FCP to DVDSP

    Hey - I have a program I need to export from FCP to DVDSP.
    It is approx. 1hr 15min long.
    What would be the best settings to use to maximize quality?
    I also want to include chapter markers for importing into DVDSP - is it better to create these in FCP or Compressor???
    This is a very important showreel and quality is a major factor...
    I am using: FCP 5.1.4 DVDSP 4.1.2 Compressor 2.3
    Thanks for all your help in advance!
    PowerPC G5   Mac OS X (10.4.9)  

    Hi:
    << What would be the best settings to use to maximize quality?>>
    You didn't mention your movie codec. Assuming you are using DV, if your FCP projects has graphic elements and heavy filters like Color Corrections, etc. you must get the best quality exporting directly from FCP through Compressor.
    If your movie is basiclally DV video with no graphics, you probably will get same quality and shorter encoding times exporting as QuickTime movie, self settings (self contained is my favorite flavor!) and using this file in Compressor.
    In Compressor use the DVD: Best Quality 90 min preset as starting point taking the MPEG2 and the Dolby 2 (AC3) presets. You most probably will get the best audio level changing the followings parameters in the standard AC3 preset:
    - Dialog Normalization: -31
    - Compression preset: None
    Using uncompressed (AIFF/PCM) audio in DVD-Rs is a major cause of playback problems and/or building errors because the high bitrate, and takes a lot of your disc space.
    If you encode inside DVDSP (using the Quicktime movie file directly in DVDSP) you'll get AIFF audio. DVDSP doesn't encode your audio to AC3.
    <<This is a very important showreel and quality is a major factor...>>
    To save encoding testing times, take a short part/s of your movie and make some encoding test. Select some parts of your footage with fast movements in the image and/or heavy transitions to check the final result.
    <<I also want to include chapter markers for importing into DVDSP - is it better to create these in FCP or Compressor??? >>
    Allways create your chapter markers in FCP or Compressor. That way you can set the exact frame where to locate it and DVDSP will preserve that position. If you add a Chapter Marker in DVDSP it will be moved to the nearest GOP boundary, not in the exact frame you decided. Check this tutorial about Chapters and Compression Markers .
    Don't forget to post your FCP movie codec/settings.
    <<StirFry..>>
    I think that a bitrate of 7.9 Mbps with uncompressed audio (DVDSP doesn't encode audio to Dolby 2) is too high and can cause some encoding/playback errors in some DVD players. Someone else can post his mind about this ! ;D
    Hope that helps !
      Alberto

  • Everytime I export from FCP using comressor I am lose my audio, any ideas as to why this is happening. Or do I have somthing turned off and I am just missing it? Dual 2.7 Ghz PowerPC G5 1.5 GB DDR SDRAM, Mac OS X (10.4.6)

    Everytime I export from FCP using comressor I am lose my audio, any ideas as to why this is happening. Or do I have somthing turned off and I am just missing it? Dual 2.7 Ghz PowerPC G5 1.5 GB DDR SDRAM, Mac OS X (10.4.6)

    Exporting via Compressor may be recommended but it is slow and doesn't fully support all available filters, etc.
    Try exporting the timeline as a QT Movie (the "normal" export) using Current Settings and them submit the resultant clip to Compression. Works for me...

  • Export from FCP directly into DVD studio pro?

    Is it possible to export from FCP directly into DVD studio pro? If not, what is the preferred file format because my exported quicktime files come up as "incompatible format" when I try to add them into my DVD project. Any help is appreciated.

    You need to encode audio as well from Compressor. You'll have 2 files - audio and video.
    Here's a tutorial:
    http://www.youtube.com/watch?v=wFgJpd7DEWw
    Message was edited by: Eric Pautsch1

  • Exporting from FCP to DVD

    Hey
    Just wondering if I can get some advise. I need to export my project from final cut pro to DVD but just wondering what the best way to do this would be to get the best quality DVD. (This is for a company to take out to potential clients to sell what the company does - so it needs to look good!)
    My project is no longer than 5 mins
    1920 x 1080 - 1080i (16:9)
    Field Dominance: None
    frame rate 25
    I have Final Cut Studio latest version.
    I'm trying out a few options at the moment using compressor - best quality - so we'll see what these look like, but I'm not sure what all the settings should be set at.
    Any advise on what you think will be best would be great.
    Thanks

    Wouldn't use Quicktime conversion - no need. Just export from FCP as Quicktime Movie at current settings.
    In my experience, changing the field dominance from interlaced to progressive can cause stuttering particularly in motion graphics - this might not be an issue if you're laying to tape for broadcast but when you convert back to interlaced for SD DVD it can look very ugly.
    In any case, at the very least, you need to be using a Kona card or IOHD to do this type of conversion properly - and really, if you want progressive you should shoot progressive.
    Message was edited by: Dynamicworm
    Message was edited by: Dynamicworm

  • PAL files exported from FCP don't display

    This is a strange one... SD PAL uncompressed files exported from FCP 6.03 won't display, you just see black. HD files are fine, as are SD PAL files exported a while ago - prior to a recent pro apps or QT update possibly? As a workaround, if they exported via compressor instead of by 'export quicktime' in FCP, they work fine. Shake is 4.0 since 4.1 doesn't want to display via a decklink.
    Any ideas? This seems to be a new one.

    Does the computer your using to view this video have Final Cut Pro installed?

  • What format to export from FCP for iDVD?

    I am having trouble coming from FCP to iDVD. Material was shot HDV on a Sony Z5 and I downconverted to DV to edit on FCP. I make a Quick Time Movie of the edit (as DV PAL) but the pans are all juddery. How should I export from FCP to stop the juddering on pans?

    http://www.sjoki.uta.fi/~shmhav/SVCDon_a_Macintosh.html#edit_convertMPEG
    BTW, this is the mother of all FAQs here Sadly the FAQ section of the forum decribes just the problem, not any solutions. And searching the forums doesn't always work either.
    ObSig: I don't benefit from the link.

  • Best way to export from FCP for website

    I've been reading around about this and am not getting a clear idea of what to do...
    I have some short sequences in FCP (longest is 2 minutes) that I want to post individually on my new website (that I'm just learning about).
    I want to export them in a way that is a small file but that looks and sounds good, and also that can be played by most or all computers.
    So I guess that is two questions: settings for export from FCP, and how to control how it will be viewed.
    Thanks so much, anyone with ideas or experience!

    We don't know what format you are dealing with, ratio etc.
    However, some short answers for you.
    For best quality at a considerable small file size the choice is, yet again, H.264 (Require QT7 or higher. For universal compatibility you may need flash conversion).
    FCP main menu>File>Export>QT Conversion>Options> the higher the bit rate the better the quality but the bigger becomes the file size. Size : i.e 320x240 if 4:3; 480x270 if 16x9). Choose AAC (Not PCM) as sound format (192 target bit rate).

  • Exporting from FCP and using Compressor at the same time?

    Is it ok to export from FCP and use compressor at the same time? I am exporting a Self-Contained, Current Setting Quicktime Movie, and using Compressor to compress a similar HDV file to Mpeg2?

    Only in FCP 7.

  • What should I use to export from FCP to DVDSP?

    I'm sorry if this question is too basic, but I've searched past discussions and read the manual, and can't seem to find the answer. I am trying to put a nearly hour-long movie I made onto a DVD, in order to have hundreds of duplicates made. I'm using DVD SP, and I had been exporting my movie from FCP to a Quicktime movie file, then importing the Quicktime file into DVD SP. Then recently I came across something online that said you should actually be exporting from FCP to Compressor, then to DVD SP. I've never used Compressor before, so I have no idea what to do, or if I even should be doing it. The video was fine when I exported to Quicktime, but I of course want to have the best video quality possible.. so if there's a way to keep the video at the highest quality possible (higher than when using Quicktime), please let me know (and if it could be explained as simple as possible, I would appreciate that).

    Hi Ryan,
    I'm relatively new to this too but you're on the right track. I would export to Compressor.
    There are various settings i.e. mpeg2 fast encode, high quality 60min, 120min, widescreen, 4:3 etc and all dependant upon what you want your end result to be.
    You'll need to choose your format - I suggest mpeg2 - 60min High Quality Encode > your destination for both the video and audio > 'submit'.
    You should end up with a file that resembles *My Movie.m2v*
    Then import that file into DVDSP into the assets pane and you're away.
    Good luck!
    -Chuck

Maybe you are looking for