1099 Misc reporting for US in SAP Standard report not containing any value
HI All,
In my current clients requirement is to get the SAP Standard reprort for 1099 Misc reporting for US
1) Accordingly i have done configuration for Withholding tax for US with tax type FE
2) There are 14 WHT Tax codes under FE , like 01 = Rent , 02 = royalty, 03 = other income etc.
3) Assigned Tax type with Co. Code
4) Activated WHT tax at Co. code
5) Created WHT country US
And also assign WHT tax type FE and respective tax code to vendors in Accounting info in Vendor Master
Posted couple of vendor invoices and made payment for those also
Then after this when i run the SAP Standard report for 1099 Misc reporting for US , then the output contains with no data.. but only contains vedor names and WHT tax code which i have assigned..
I think i have missed some configuration may be . Can any one let me know the detail step by step config and process how to get proper out put in 1099 Misc reporting for US in Standard reporting..
Regards,
Sandip
Hello auroar,
I followed the path that you provided and that lead me to this part of the tree: Define File Format for Withholding Tax Reporting...This is where I found the information that I needed.
Thank you very much.
-Patrick
Edited by: Patrick Smith on Oct 22, 2009 8:41 PM
Similar Messages
-
Report painter execution error - GR657 - set does not contain any entries
Hello,
During our execution of report we are getting the below error:
Set 0102PCBT1IPROVDIV in set 0002$ZA13#######ROW0236 does not contain any entries
Message no. GR657
Diagnosis
You cannot use empty sets to define reports. The single-dimension set contains a basic set that does not contain any values.
Procedure
Use a set that contains at least one value, or enter values for the set defined.
This has been discussed in a similar Thread in May 2010 by puri & Praveen Jagdeesan,
However I am unable to trace the set & how to delete the blank values.
0002$ZA13#######ROW0236 or ROW0236 in the system.
Set 1IPROVDIV is exisitng in system.
Also when we go to KAH3 - Cost element hierarchy & see in the where used list we are not able to see the set being used in the report whereas the system from where we have exported the report we can see that this set is being used in the report.
Please could you help in resolving the same.Hello Murali,
Thanks for the reponse. But set 0002$ZA13#######ROW0236 is not available in system.
Please could you guide me on the same.
Thanks & Regards
Shreenath -
Constant PCORP for Ledger !* does not contain any value
Dear SAP Guru's,
I have a user attempting to process a credit memo via t-code FB75 and is receiving the following error message while attempting to post the transaction.
Constant PCORP for Ledger !* does not contain any value
The user was able to post to other customer accounts but this one. The customer master looks fine.
POINTS AWARDED.
Thanks!Hi,
Pls go to the following path
GL accounting(new)-business transaction-Doument Spiltting-Activate doument spiltting.
Praobaly you would have chosen the standary a/c assignment check box and constant.
That's y this error occured even i have got same error and it resolved now. -
Using the latest version of SAP standard reports
After trouble shooting several problems in Report Painter reports, I noticed we are not using the most updated version of SAP delivered reports. We upgraded from 46c to ECC6 last year. Is there some regeneration (of report groups) procedures we were supposed to do to bring standard reports in line during upgrade?
What is the best way to review thel version of all reports currently used?
What about those reports created from coping SAP standard reports, if standard reports get updated, how can the copied report be updated as well?
Thanks in advance for any feedback.No answer, not yet resolved but I close this message for now.
-
File Screening Audit Report does not contain any data : report statistics is empty
Hi ,
I have enabled File screen audit and Record file screening activity in auditing database options in file server 2008.
I am getting details of file screen audit in Event log , But incident report file screen audit report does not contain any value.
Getting report for each incident of file screen audit , But it does not contain any data in report statistics.
Data available in scheduled report of file screen audit.. not available in incident report only..
Please assist...
Thanks,
Vasanth.M
Thanks, Vasanth.M.Please note that, If the Record file screening activity in the auditing database check box is cleared, the File Screening Audit Reports will not contain any information. To configure file screen audit, I would refer you on this informative
technet library :
https://technet.microsoft.com/en-us/library/cc754540.aspx
Carlo -
Sap standard report for delivery document block.
Hi,
We want to block delivery document for further processing that picking and PGI.
For that we are looking for sap standard report if available so we could provide it to client.
so we need
SAP standard report for blocked delivery document.Hi,
As far as my understanding there is no such report but you can try with report MATERIAL WHERE USED LIST
Please find t-code for this as due to system unavailable i am not mentioning t-code for same
kapil -
Wrong record for PSA in Education and Training (SAP Standard) report
Hello All,
Assuming I have 2 records for a particular Personnel number in Infotype 0001,
1) First record
Personnel Nubmer: 10000000
End Date: 05/30/2004
Start Date: 12/31/2004
Personnel subarea: A
2) Second record
Personnel Nubmer: 10000000
End Date: 01/01/2005
Start Date: 12/31/9999
Personnel subarea: B
When I executed the Education and Training (SAP Standard) report, I then selected the PSA-"B" and the other period which is From: 01/01/2005 to 12/31/999. The result is that it still displays the first record which is already delimited.
How come this happen?
Thanks!
- AnnalynHi,
Check PAR1 and PAR2,
Can you seen two records for that emp.
And aslo check IT 0001, 0041 overview from pa30 and if you see the two dates delete the incorrect date and checkthe report.
Vibin -
Dear Experts,
i need the details for SAP Standard report for this,
Inventory Management,Purchasing, Warehouse Management,etc., all are these mm modules.
List of these modules for SAP standard reports:
1.SD
2.FI
3.CO
4.MM
5.ABAP
6.BASIS
Plse give the link of all these modules.
Regards,
A.Sithanandanhi..
please check this link..
it may help u,,,
http://wiki.sdn.sap.com/wiki/display/ERPLO/SAPStandardReports
thnks -
Hi there,
I'm new to SAP Finantials and i do not have access to the sap menu to check o Information Systems wich are the SAP Standard Reports for FICO. Could you help me on finding the names of these standard reports both for receivables and payables?
Thanks in advance,
Marc1. Structured Account Balances (Balance Sheet & P&L Account in FS Version Format) S_ALR_87012279
2. GL Account Balances (Totals & Balances ) S_ALR_87012301
3. GL Line Items S_ALR_87012282
4. Statements for GL Accounts, Customers & Vendors S_ALR_87012332
5. Document Journal S_ALR_87012287
6. Compact Document Journal S_ALR_87012289
7. Line Item Journal S_ALR_87012291 8. Display of Changed Documents S_ALR_87012293
9. Invoice Numbers assigned Twice S_ALR_87012341
10. Gaps in Document Number Assignments S_ALR_87012342
11. Posting Totals Document Type wise S_ALR_87012344
12. Recurring Entry Documents S_ALR_87012346
13. Chart of Accounts S_AL:R_87012326
14. GL Account List S_AL:R_87012328
15. Display Changes to GL Accounts S_ALR_87012308
16. Financial Statement Version FSE2 CASH & BANK REPORTS
1. Check Information List FCH6
2. Check Register FCHN
3. Check Number Ranges S_P99_41000102
TAX REPORTS & REGISTERS
1. List of Internally generated Excise Invoices J1I7
2. Capital Goods Transfer of Credit J2I8
3. List of GRs without Excise Invoice J1IGR
4. List of SubContract Challans J1IFR
5. CENVAT Register J2I9
ACCOUNTS RECEIVABLE
1. Bill Holdings (Bill of Exchange Receivable List with ALV facility)
S-ALR_87009987
2. Customer Balances in Local Currency S_ALR_87012172
3. Customer Line Items S_ALR_87012197
4. Due Dates Analysis for Open Items S_ALR_87012168
5. List of Customer Open Items S_ALR_87012173
6. Customer Evaluation with Open Item Sorted List S_ALR_87012176
7. Customer Payment History S_ALR_87012177
8. Customer Open Item Analysis (Overdue Items Balance) S_ALR_87012178
9. List of Customer Cleared Line Items S_ALR_87012198
10.List of Down Payments open at key date S_ALR_87012199
11. Debit & Credit Notes Register u2013 Monthly S_ALR_87012287
12. Customer wise Sales S_ALR_87012186
1. Vendor Balances S_ALR_87012082
2. Vendor Debit/Credit Memo Register S_ALR_87012287 -
Dear Firends,
Kindly tell me the SAP standard Report which give the details of
Po number, delivery Note, Bill of lading, Header text and GR/GI slip no.
Thanks in advance.
Regards,
williamHi,
You can get all these fields in MB51 report by selecting the relavant fields in the selection variant. If any of the required fields are not available than you can add those in img -going tothe Inv Mgt-Reporting - Define field selection for material document list.
Dhruba -
Need to find All Custom Reports which are based on SAP standard reports
Hi Specialists,
I would like to find out all the customized reports which are a copy of SAP standard reports in the client's system.
For Eg. RPCP11G0 is the SAP standard report which has been customized & it's code has been re-written into a Custom report i.e. ZGBPPYMP001_P11D.
I would like to know all such occurences in the system.
Steps already done:
1) Tried searching with RPR_ABAP_SOURCE_SCAN & RS_ABAP_SOURCE_SCAN.
Please suggest .
Thanks
Abhinav.it's only possible with an tool-program
when your developers have not change the line with the REPORT-command.
e.g.
standard-report is RAGITT01
copy is ZC_RAGITT01 or sth like this
but report line is unchanged in copy: "REPORT RAGITT01 MESSAGE-ID AB..."
solution:
select all reports from TRDIR/TADIR from your Z/Y-device classes
and analyse the reports with
read report ZC_RAGITT01 into wa.
and use find for searching 'report-command'.
and check whether the result of that finding is an standard abap
hope that helps
Andreas -
Want to convert Sap standard report into alvgrid
HI PLEASE HELP THIS IS CODE BELOW OF SAP STANDARD REPORT CODE WANT TO CONVERT INTO ALVGRID
LEAS HELP
REPORT RFKOPR00
MESSAGE-ID FR
LINE-SIZE 132
NO STANDARD PAGE HEADING.
TABLES: B0SG,
LFA1, "Daten auf Mandantenebene
LFB1, "Daten auf Buchungskreisebene
LFB5, "Mahndaten
LFC1, "Verkehrszahlen
LFC3, "Sonderumsätze
BSIK, "Offend Posten
BKPF,
BSEG,
BSEGA.
TABLES:
BHDGD,
T001,
T001S,
*T001S,
T074T,
T074U,
TBSL,
TBSLT,
TCURX,
ADRS,
RFPDO,
RFPDO1,
RFSDO,
FAEDE.
FIELD-SYMBOLS: .
*Hilfsfelder
*---Prüfung ob mehrere Hauswährungen verarbeitet werden.
DATA: CFAKT(3) TYPE P,
CHECKSALDO(8) TYPE P,
CHECKAGOBL(8) TYPE P,
WAERS LIKE T001-WAERS,
WFLAG(1) TYPE P VALUE '0',
WAERS2 LIKE T001-WAERS,
WFLAG2(1) TYPE P VALUE '0',
PH-LINE(132) TYPE C.
*---Ermittlung aktuelles Geschäftsjahr über Funktionsbaustein.
DATA: CURRY LIKE BSIK-GJAHR.
*-Ermittlung Zahlungseingang bei Zahlungen mit Skontoabzug--
*ATA: ZVTAGE LIKE KNB4-VZS01, "Verzugstage
ZVSKONTO(8) TYPE P, "Zahlungsvolumen bei Zahlung mit Skonto
ZVNETTO(8) TYPE P, "Zahlungsvolumen bei Nettozahlung
ZVVERZUG(8) TYPE P, "Verzugstage
ZVMALVZ(8) TYPE P, "Zahlungvolumen * Verzugstage
"KNB4-VZSxx)
ZVTYP(1) TYPE C, "Skonto oder Nettozahler
ZVPER(4) TYPE C. "Periode letze Zahlung
*---Zeilenanzahl fü Adressausgabe -
DATA: ZEILENANZAHL LIKE ADRS-ANZZL VALUE 7.
DATA: KSALDO(6) TYPE P. "Saldovortrag
BEABZUG(6) TYPE P, "Berechtigte Abzüge
UBABZUG(6) TYPE P, "Unberechtigte Abzüge
JAHRAUG(6) TYPE P, "Kumulierter Jahresausgleich
KUMZINS(6) TYPE P. "Kumulierter Zins
Ausgabe der Mahndaten pro Buchungskreis.
DATA: INDEX(2) TYPE P VALUE 0.
Hilfsfelder
DATA: HF(1) TYPE C.
DATA: TXT_1(78) TYPE C, "Mahnbereich
TXT_2(78) TYPE C, "Mahnart
TXT_3(78) TYPE C, "Mahnempfänger
TXT_4(78) TYPE C, "Mahndatum
TXT_5(78) TYPE C, "Mahnstufe
TXT_6(78) TYPE C, "Mahnsperre
TXT_7(78) TYPE C, "Mahnverfahren
TXT_8(78) TYPE C. "Sachbearbeiter
DATA: BEGIN OF XMAHN OCCURS 10.
INCLUDE STRUCTURE LFB5.
DATA: END OF XMAHN.
Hilfsfelder
DATA: CHAR1(1) TYPE C.
DATA: FLAG1(1) TYPE C.
DATA: INTENS(1) TYPE C.
DATA: FLAG2(1) TYPE C.
*---- K o n s t a n t e n -
*---- DNULL zum Vergleich mit Datumsfeldern -
DATA: DNULL(8) TYPE C VALUE '00000000'.
*---- DECKBLATT = 'N' ==> Kein Deckblatt bei NEW-SECTION -
DATA: DECKBLATT TYPE C VALUE 'N'.
*---- 'H' = Hilfsfelder, die jederzeit fuer Berechnungen ver- -
*---- wendet werden koennen. -
DATA: BEGIN OF H,
STICHTAG(8),
OFFSET(2) TYPE P,
OFFSE1(2) TYPE P,
SOLL LIKE LFC1-UM01S,
HABEN LIKE LFC1-UM01H,
SALDO LIKE LFC1-UMSAV,
SHBKZ LIKE LFC3-SHBKZ, "Sonderhauptbuchkennzeichen
SALDV LIKE LFC3-SALDV, "Sonderhauptbuch-Saldovortrag
SHBLS LIKE LFC3-SOLLL, "Sonderhauptbuch-Lfd.-Saldo
SHBSL LIKE LFC3-SOLLL, "Sonderhauptbuch-Lfd.-SOLL
SHBHB LIKE LFC3-HABNL, "Sonderhauptbuch-Lfd.-HABEN
GBNUM LIKE lfC1-GBN01, "Geschaeftsber. Nummer ECKERT
GBUMS LIKE lfC1-GBU01, "Geschaeftsber. Umsatz
TEXT(15),
UMLOW LIKE BSIK-UMSKZ, "Umsatzkennzeichen
UMHIG LIKE BSIK-UMSKZ, "Umsatzkennzeichen
END OF H.
---- 'C' = Zwischenergebnisse, die aus Feldern des C-Segmentes ---
*---- berechnet werden. -
DATA: BEGIN OF C,
SALDO TYPE P, "Saldo
UMKZ1 LIKE LFC3-SHBKZ, "SHBKZ 1
SUMS1 TYPE P, "Sonderumsatz 1
UMKZ2 LIKE LFC3-SHBKZ, "SHBKZ 2
SUMS2 TYPE P, "Sonderumsatz 2
UMKZ3 LIKE LFC3-SHBKZ, "SHBKZ 3
SUMS3 TYPE P, "Sonderumsatz 3
UMKZ4 LIKE LFC3-SHBKZ, "SHBKZ 4
SUMS4 TYPE P, "Sonderumsatz 4
UMKZ5 LIKE LFC3-SHBKZ, "SHBKZ 5
SUMS5 TYPE P, "Sonderumsatz 5
UMKZ6 LIKE LFC3-SHBKZ, "SHBKZ 6
SUMS6 TYPE P, "Sonderumsatz 6
UMKZ7 LIKE LFC3-SHBKZ, "SHBKZ 7
SUMS7 TYPE P, "Sonderumsatz 7
UMKZ8 LIKE LFC3-SHBKZ, "SHBKZ 8
SUMS8 TYPE P, "Sonderumsatz 8
UMKZ9 LIKE LFC3-SHBKZ, "SHBKZ 9
SUMS9 TYPE P, "Sonderumsatz 9
UMKZ10 LIKE LFC3-SHBKZ, "SHBKZ 10
SUMS10 TYPE P, "Sonderumsatz 10
SONOB TYPE P, "Sonstige Umsatz-Kz
BABZG TYPE P, "Berechtigte Abzuege
UABZG TYPE P, "Unberechtigte Abzuege
KZINS TYPE P, "Zinszahlungen
KUMUM TYPE P, "Umsatz
KUMAG TYPE P, "Kum. Jahresausgleich
KREUEB TYPE P, "Kreditueberschreitung
AGOBLI TYPE P, "Gesamt-Obligo (absolut)
AGOBLI LIKE LFC1-UMSAV, "Gesamt-Obligo (absolut)
RGOBLI TYPE P, "Gesamt-Obligo (relativ)
LFTAGE(3) TYPE P, "Langfristige Überzugstage
MFTAGE(3) TYPE P, "Mittelfristige Überzugstage
KFTAGE(3) TYPE P, "Kurzfristige Überzugstage
END OF C.
---- 'C2'= Zwischenergebnisse, die aus Feldern des C-Segmentes ---
*---- berechnet werden. -
DATA: BEGIN OF C2 OCCURS 0,
BUKRS LIKE LFC1-BUKRS,
SALDO TYPE P, "Saldo
WEXOB TYPE P, "Wechsel-Obligo W,S,B
ANZOB TYPE P, "Anzahlungs-Obligo A
ZANFB TYPE P, "Zahlungs-Anforderung F
UMKZ1 LIKE LFC3-SHBKZ, "SHBKZ 1
SUMS1 TYPE P, "Sonderumsatz 1
UMKZ2 LIKE LFC3-SHBKZ, "SHBKZ 2
SUMS2 TYPE P, "Sonderumsatz 2
UMKZ3 LIKE LFC3-SHBKZ, "SHBKZ 3
SUMS3 TYPE P, "Sonderumsatz 3
UMKZ4 LIKE LFC3-SHBKZ, "SHBKZ 4
SUMS4 TYPE P, "Sonderumsatz 4
UMKZ5 LIKE LFC3-SHBKZ, "SHBKZ 5
SUMS5 TYPE P, "Sonderumsatz 5
UMKZ6 LIKE LFC3-SHBKZ, "SHBKZ 6
SUMS6 TYPE P, "Sonderumsatz 6
UMKZ7 LIKE LFC3-SHBKZ, "SHBKZ 7
SUMS7 TYPE P, "Sonderumsatz 7
UMKZ8 LIKE LFC3-SHBKZ, "SHBKZ 8
SUMS8 TYPE P, "Sonderumsatz 8
UMKZ9 LIKE LFC3-SHBKZ, "SHBKZ 9
SUMS9 TYPE P, "Sonderumsatz 9
UMKZ10 LIKE LFC3-SHBKZ, "SHBKZ 10
SUMS10 TYPE P, "Sonderumsatz 10
SONOB TYPE P, "Sonstige Umsatz-Kz
BABZG TYPE P, "Berechtigte Abzuege
UABZG TYPE P, "Unberechtigte Abzuege
KZINS TYPE P, "Zinszahlungen
KUMUM TYPE P, "Umsatz
KUMAG TYPE P, "Kum. Jahresausgleich
KREUEB TYPE P, "Kreditueberschreitung
AGOBLI TYPE P, "Gesamt-Obligo (absolut)
AGOBLI LIKE LFC1-UMSAV, "Gesamt-Obligo (absolut)
RGOBLI TYPE P, "Gesamt-Obligo (relativ)
LFTAGE(3) TYPE P, "Langfristige Überzugstage
MFTAGE(3) TYPE P, "Mittelfristige Überzugstage
KFTAGE(3) TYPE P, "Kurzfristige Überzugstage
ZVTYP(1) TYPE C, "Flag Skonto oder Nettozahler
ZVPER(6) TYPE C, "letze Zahlungsperiode
ZVVERZUG(8) TYPE P, "Durchschittliche Verzugst
END OF C2.
---- 'C3'= Zwischenergebnisse, die aus Feldern des C-Segmentes ---
*---- berechnet werden. -
DATA: BEGIN OF C3,
SALDO TYPE P, "Saldo
WEXOB TYPE P, "Wechsel-Obligo W,S,B
ANZOB TYPE P, "Anzahlungs-Obligo A
ZANFB TYPE P, "Zahlungs-Anforderung F
UMKZ1 LIKE LFC3-SHBKZ, "SHBKZ 1
SUMS1 TYPE P, "Sonderumsatz 1
UMKZ2 LIKE LFC3-SHBKZ, "SHBKZ 2
SUMS2 TYPE P, "Sonderumsatz 2
UMKZ3 LIKE LFC3-SHBKZ, "SHBKZ 3
SUMS3 TYPE P, "Sonderumsatz 3
UMKZ4 LIKE LFC3-SHBKZ, "SHBKZ 4
SUMS4 TYPE P, "Sonderumsatz 4
UMKZ5 LIKE LFC3-SHBKZ, "SHBKZ 5
SUMS5 TYPE P, "Sonderumsatz 5
UMKZ6 LIKE LFC3-SHBKZ, "SHBKZ 6
SUMS6 TYPE P, "Sonderumsatz 6
UMKZ7 LIKE LFC3-SHBKZ, "SHBKZ 7
SUMS7 TYPE P, "Sonderumsatz 7
UMKZ8 LIKE LFC3-SHBKZ, "SHBKZ 8
SUMS8 TYPE P, "Sonderumsatz 8
UMKZ9 LIKE LFC3-SHBKZ, "SHBKZ 9
SUMS9 TYPE P, "Sonderumsatz 9
UMKZ10 LIKE LFC3-SHBKZ, "SHBKZ 10
SUMS10 TYPE P, "Sonderumsatz 10
SONOB TYPE P, "Sonstige Umsatz-Kz
BABZG TYPE P, "Berechtigte Abzuege
UABZG TYPE P, "Unberechtigte Abzuege
KZINS TYPE P, "Zinszahlungen
KUMUM TYPE P, "Umsatz
KUMAG TYPE P, "Kum. Jahresausgleich
KREUEB TYPE P, "Kreditueberschreitung
AGOBLI TYPE P, "Gesamt-Obligo (absolut)
AGOBLI LIKE LFC1-UMSAV, "Gesamt-Obligo (absolut)
RGOBLI TYPE P, "Gesamt-Obligo (relativ)
LFTAGE(3) TYPE P, "Langfristige Überzugstage
MFTAGE(3) TYPE P, "Mittelfristige Überzugstage
KFTAGE(3) TYPE P, "Kurzfristige Überzugstage
ZVTYP(1) TYPE C, "Flag Skonto oder Nettozahler
ZVPER(6) TYPE C, "letze Zahlungsperiode
ZVVERZUG(8) TYPE P, "Durchschittliche Verzugst
END OF C3.
DATA: SHBETRAG LIKE BSEGA-DMSHB. "TYPE P.
*---- 'RTAB' = Rastertabelle fuer offene Posten -
DATA: BEGIN OF RTAB OCCURS 30,
SORTK(1) TYPE C, "0 = Summe Gesber
"1 = Summe aller Gesber
"2 = Umsatzdaten
BUKRS LIKE BSIK-BUKRS,
GSBER LIKE BSIK-GSBER,
WAERS LIKE BSIK-WAERS,
RAART TYPE C, "Rasterart
"1 = Netto-Faelligkeit
"2 = Skonto1-Faelligkeit
"3 = Zahlungseingang
"4 = Ueber-Faelligkeit
SPERR TYPE P, "gesprrte Posten
KUMUM TYPE P, "Umsatz
ANZAH TYPE P, "Anzahlungen
OPSUM TYPE P, "Offene Posten Summe
RAST1 TYPE P, "Rasterfeld 1
RAST2 TYPE P, "Rasterfeld 2
RAST3 TYPE P, "Rasterfeld 3
RAST4 TYPE P, "Rasterfeld 4
RAST5 TYPE P, "Rasterfeld 5
RAST6 TYPE P, "Rasterfeld 6
END OF RTAB.
*---- 'RBUS' = Rastertabelle fuer Summen pro Sachbearbeiter -
*ATA: BEGIN OF RBUS OCCURS 30,
SORTK(1) TYPE C, "0 = Summe Gesber
"1 = Summe aller Gesber
BUKRS LIKE BSIk-BUKRS,
GSBER LIKE BSIk-GSBER,
WAERS LIKE BSIk-WAERS,
RAART TYPE C, "Rasterart
"1 = Netto-Faelligkeit
"2 = Skonto1-Faelligkeit
"3 = Zahlungseingang
"4 = Ueber-Faelligkeit
KUMUM TYPE P, "Umsatz
ANZAH TYPE P, "Anzahlungen
OPSUM TYPE P, "Offene Posten Summe
RAST1 TYPE P, "Rasterfeld 1
RAST2 TYPE P, "Rasterfeld 2
RAST3 TYPE P, "Rasterfeld 3
RAST4 TYPE P, "Rasterfeld 4
RAST5 TYPE P, "Rasterfeld 5
RAST6 TYPE P, "Rasterfeld 6
END OF RBUS.
*---- 'RBUK' = Rastertabelle fuer Summen pro Buchungskreis -
DATA: BEGIN OF RBUK OCCURS 30,
SORTK(1) TYPE C, "0 = Summe Gesber
"1 = Summe aller Gesber
"2 = Umsatzdaten
BUKRS LIKE BSIK-BUKRS,
GSBER LIKE BSIK-GSBER,
WAERS LIKE BSIK-WAERS,
RAART TYPE C, "Rasterart
"1 = Netto-Faelligkeit
"2 = Skonto1-Faelligkeit
"3 = Zahlungseingang
"4 = Ueber-Faelligkeit
SPERR TYPE P, "gesprrte Posten
KUMUM TYPE P, "Umsatz
ANZAH TYPE P, "Anzahlungen
OPSUM TYPE P, "Offene Posten Summe
RAST1 TYPE P, "Rasterfeld 1
RAST2 TYPE P, "Rasterfeld 2
RAST3 TYPE P, "Rasterfeld 3
RAST4 TYPE P, "Rasterfeld 4
RAST5 TYPE P, "Rasterfeld 5
RAST6 TYPE P, "Rasterfeld 6
END OF RBUK.
---- 'RSUM' = Rastertabelle pro Währung über alle Buchungskreise ---
DATA: BEGIN OF RSUM OCCURS 30,
SORTK(1) TYPE C, "0 = Summe Gesber
"1 = Summe aller Gesber
BUKRS LIKE BSIk-BUKRS,
GSBER LIKE BSIk-GSBER,
WAERS LIKE BSIK-WAERS,
RAART TYPE C, "Rasterart
"1 = Netto-Faelligkeit
"2 = Skonto1-Faelligkeit
"3 = Zahlungseingang
"4 = Ueber-Faelligkeit
SPERR TYPE P, "gesperrte Posten
KUMUM TYPE P, "Umsatz
ANZAH TYPE P, "Anzahlungen
OPSUM TYPE P, "Offene Posten Summe
RAST1 TYPE P, "Rasterfeld 1
RAST2 TYPE P, "Rasterfeld 2
RAST3 TYPE P, "Rasterfeld 3
RAST4 TYPE P, "Rasterfeld 4
RAST5 TYPE P, "Rasterfeld 5
RAST6 TYPE P, "Rasterfeld 6
END OF RSUM.
*---- interne Tabelle für Periodenabgrenzung----
RANGES: BMONAT FOR RFPDO-DOPRBMON.
---- In die Felder RP01 bis RP05 werden dynamisch die von aussen ---
*---- eingegebenen Rasterpunkte uebertragen -
DATA: RP01(2) TYPE P, " 0
RP02(2) TYPE P, " 20
RP03(2) TYPE P, " 40
RP04(2) TYPE P, " 80
RP05(2) TYPE P, " 100
RP06(3) TYPE P, " 1
RP07(3) TYPE P, " 21
RP08(3) TYPE P, " 41
RP09(3) TYPE P, " 81
RP10(3) TYPE P. " 101
*---- In die Felder RC01 bis RC10 werden die Rasterpunkte in -
---- charakterform abgestellt. (fuer REPLACE-Funktion in Variabler -
*---- Ueberschrift) -
DATA: RC01(4) TYPE C, " 0
RC02(4) TYPE C, " 20
RC03(4) TYPE C, " 40
RC04(4) TYPE C, " 80
RC05(4) TYPE C, " 100
RC06(4) TYPE C, " 1
RC07(4) TYPE C, " 21
RC08(4) TYPE C, " 41
RC09(4) TYPE C, " 81
RC10(4) TYPE C. " 101
*---- Felder für Umsatzkennzeichen -
*---- für Ausweis der Sonderumsätze----
DATA: HUMKZ1 LIKE LFC3-SHBKZ,
HUMKZ2 LIKE LFC3-SHBKZ,
HUMKZ3 LIKE LFC3-SHBKZ,
HUMKZ4 LIKE LFC3-SHBKZ,
HUMKZ5 LIKE LFC3-SHBKZ,
HUMKZ6 LIKE LFC3-SHBKZ,
HUMKZ7 LIKE LFC3-SHBKZ,
HUMKZ8 LIKE LFC3-SHBKZ,
HUMKZ9 LIKE LFC3-SHBKZ,
HUMKZ10 LIKE LFC3-SHBKZ.
*---- GBZAEHL - In diesem Feld wird vermerkt, fuer wieviele Ge- -
*---- schaeftsbereiche ein OP-Raster ausgegeben wird. -
---- Wird das Raster nur fuer einen Geschaeftsbereich ge- -
*---- druckt, so entfaellt das Summen-Raster. -
DATA: GBZAEHL(3) TYPE P.
---- TOP-FLAG '1' = bei TOP-OF-PAGE Einzelpostenueberschrift ausg. --
*---- '2' = bei TOP-OF-PAGE Ueberschrift fuer Raster ausgeb. *
*---- '3' = bei TOP-OF-PAGE ULINE ausgeben. -
---- '4' = bei TOP-OF-PAGE Stammsatzueberschrift ausgeben --
DATA: TOP-FLAG(1) TYPE C.
*---- SEL-STAMM 'J' = Stammsatz wird ausgewertet *
*---- 'N' = Stammsatz wird nicht ausgewertet *
*---- SEL-POSTN 'J' = Stammsatz hat Posten gerastert *
*---- 'N' = Stammsatz hat keine Posten gerastert *
DATA: BEGIN OF SEL,
STAMM(1) TYPE C,
POSTN(1) TYPE C,
POST2(1) TYPE C,
END OF SEL.
*---- SATZART '1' = Stammdaten -
*---- '2' = Faelligkeitsraster -
*---- '3' = Einzelposten -
DATA: SATZART(1) TYPE C.
*---- RART = Erste ausgewaehlte Rasterart -
DATA: RART(1) TYPE C.
*---- TAGE = Tage nach denen die Posten sortiert sind -
DATA: TAGE(4) TYPE P,
*---- NTAGE = Tage fuer Netto-Faelligkeit -
NTAGE(4) TYPE P,
*---- STAGE = Tage fuer Skonto1-Faelligkeit -
STAGE(4) TYPE P,
*---- ATAGE = Alter der Belege -
ATAGE(4) TYPE P,
*---- UTAGE = Tage fuer Ueber-Faelligkeit -
UTAGE(4) TYPE P.
*---- RASTERUU dient zur Sortierung der Einzelposten. Die Posten -
*---- gemaess ihrer Rasterung die Werte '1' bis '6' -
DATA: RASTERUU(1) TYPE C.
*---- RAART Rasterart -
---- Die einzelnen Felder der Feldleiste werden bei SART-OF-SELECTION
*---- mit 1 oder 0 bestueckt. -
*ATA: BEGIN OF RAART,
NET(1) TYPE C, "X = ausgewaehlt, ' ' = nicht ausgewaehlt
SKT(1) TYPE C, "X = ausgewaehlt, ' ' = nicht ausgewaehlt
UEB(1) TYPE C, "X = ausgewaehlt, ' ' = nicht ausgewaehlt
END OF RAART.
DATA: BEGIN OF GB,
GSBER LIKE BSIK-GSBER,
WAERS LIKE BSIK-WAERS,
END OF GB.
*---- Variable Ueberschriften -
DATA: BEGIN OF VARUEB1,
FELD1(45) TYPE C,
FELD2(14) TYPE C,
FELD3(14) TYPE C,
FELD4(14) TYPE C,
FELD5(14) TYPE C,
FELD6(14) TYPE C,
FELD7(14) TYPE C,
END OF VARUEB1.
DATA: BEGIN OF VARUEB2,
FELD1(45) TYPE C,
FELD2(14) TYPE C,
FELD3(14) TYPE C,
FELD4(14) TYPE C,
FELD5(14) TYPE C,
FELD6(14) TYPE C,
FELD7(14) TYPE C,
END OF VARUEB2.
DATA: VARUEB3(132),
VARUEB4(132),
VARTXT1(40),
VARTXT(40) TYPE C.
*---- Variable für Ausgabe der Sonderumsätze----
DATA: SHBBEZ LIKE T074T-LTEXT.
DATA: ASUMS TYPE P. "
*---- Interne Tabelle für Bezeichnungen der SHBKZ----
DATA: BEGIN OF BEZSHB OCCURS 10,
SHBKZ LIKE T074T-SHBKZ,
LTEXT LIKE T074T-LTEXT,
END OF BEZSHB.
*---- Interne Tabelle für Zwischenspeicherung -
DATA: BEGIN OF BLKEY,
BUKRS LIKE BSIK-BUKRS,
BELNR LIKE BSIK-BELNR,
GJAHR LIKE BSIK-GJAHR,
BUZEI LIKE BSIK-BUZEI,
END OF BLKEY.
DATA: BEGIN OF RTAGE,
NTAGE LIKE NTAGE,
STAGE LIKE STAGE,
ATAGE LIKE ATAGE,
UTAGE LIKE UTAGE,
END OF RTAGE.
DATA: BEGIN OF HBSIK OCCURS 10.
INCLUDE STRUCTURE BSIK.
INCLUDE STRUCTURE BSEGA.
INCLUDE STRUCTURE RTAGE.
DATA: END OF HBSIK.
DATA: BEGIN OF REFBL OCCURS 10.
INCLUDE STRUCTURE BLKEY.
INCLUDE STRUCTURE RTAGE.
DATA: END OF REFBL.
DATA: BEGIN OF HLFB1 OCCURS 10.
INCLUDE STRUCTURE LFB1.
DATA: END OF HLFB1.
DATA: BEGIN OF HT001 OCCURS 10.
INCLUDE STRUCTURE T001.
DATA: END OF HT001.
*---- Interne Tabelle für Ausgabe der Obligos -
DATA: BEGIN OF AOBLIGO OCCURS 12,
OBART TYPE C, "Flag für Obligoart 1 = Kontokorrent
" 2 = SHBKZ
" 3 = sonstige SHB
SHBKZ LIKE T074T-SHBKZ, "SHB-Kennzeichen
LTEXT LIKE T074T-LTEXT, "Bezeichnung
OBLIG TYPE P, "Obligobetrag
END OF AOBLIGO.
*---- Declarationen für Accessibility /ALV GRID -
data: ACC_MODE type c.
Data: UEBTEXT(22) type c.
Data: UEKTEXT(15) type c.
Data: TITTEXT(100) type c.
Data: DATTEXT(10) type c.
DATA: BEGIN OF RTAB_ALV OCCURS 30,
SORTK(1) TYPE C, "0 = Summe Gesber
"1 = Summe aller Gesber
"2 = Umsatzdaten
BUKRS LIKE BSIk-BUKRS,
lifnr LIKE LFA1-lifnr,
busab like lfb1-busab,
SORTL LIKE lfA1-SORTL,
LAND1 LIKE lfA1-LAND1,
GSBER LIKE BSIk-GSBER,
WAERS LIKE BSIk-WAERS,
hwaer like rf140-hwaer,
RAART like RF140-RAART, "Rasterart
shkzg like bsik-shkzg,
XGUTS TYPE C, "Gutschrift
KUMUM LIKE RF140-KUMUMHW, "Umsatz
ANZAH like rf140-anzbthw, "Anzahlungen
OPSUM like RF140-gsaldd, "Offene Posten Summe
RAST1 like RF140-rast1, "Rasterfeld 1
RAST2 like RF140-rast2, "Rasterfeld 2
RAST3 like RF140-rast3, "Rasterfeld 3
RAST4 like RF140-rast4, "Rasterfeld 4
RAST5 like RF140-rast5, "Rasterfeld 5
RAST6 like RF140-rast6, "Rasterfeld 6
END OF RTAB_ALV.
*"General Data
TYPE-POOLS: SLIS.
*DATA: BEGIN OF GT_OUTTAB OCCURS 0.
INCLUDE STRUCTURE rtab_alv.
*DATA: END OF GT_OUTTAB.
Data: GS_LAYOUT TYPE SLIS_LAYOUT_ALV,
G_EXIT_CAUSED_BY_CALLER,
GS_EXIT_CAUSED_BY_USER TYPE SLIS_EXIT_BY_USER,
G_REPID LIKE SY-REPID,
G_GRID_TITLE TYPE LVC_TITLE.
*"Callback
*Data: GT_LIST_TOP_OF_PAGE TYPE SLIS_T_LISTHEADER,
G_STATUS_SET TYPE SLIS_FORMNAME VALUE 'PF_STATUS_SET',
Data: G_USER_COMMAND TYPE SLIS_FORMNAME VALUE 'USER_COMMAND'.
G_TOP_OF_PAGE TYPE SLIS_FORMNAME VALUE 'TOP_OF_PAGE',
G_TOP_OF_LIST TYPE SLIS_FORMNAME VALUE 'TOP_OF_LIST',
G_END_OF_LIST TYPE SLIS_FORMNAME VALUE 'END_OF_LIST'.
*"Variants
DATA: GS_VARIANT LIKE DISVARIANT,
G_SAVE.
Global structure of list
fieldcatalog
DATA: LS_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
DATA: GT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE.
sort
*DATA: GT_SORT TYPE SLIS_T_SORTINFO_ALV.
events
*DATA: GT_EVENTS TYPE SLIS_T_EVENT.
*----- Structure for specific color settings -
*DATA: COL_TAB_T TYPE SLIS_T_SPECIALCOL_ALV,
COL_TAB TYPE SLIS_SPECIALCOL_ALV.
DATA: G_TABNAME TYPE SLIS_TABNAME VALUE 'RTAB_ALV'.
print
*DATA: GS_PRINT TYPE SLIS_PRINT_ALV.
*---- FIELD-GROUPS -
FIELD-GROUPS:
HEADER,
STAMMDATEN,
OP-RASTER,
EINZELPOSTEN.
INSERT
LFB1-BUKRS " Buchungskreis
lfB1-BUSAB " Sachbearbeiter
LFA1-LIFNR " Kontonummer
SATZART " Satzart
RTAB-SORTK " Sortkz fuer Tabelle RTAB
" '0' = normale Eintraege
" '1' = Summeneintraege
GB " Geschaeftsbereich
" - GB-GSBER
" - GB-WAERS
RASTERUU " Kennzeichen fuer Detailposten bzw Raster
ab hier nur fuer Einzelposten -
TAGE " Rastertage fuer Detailposten
BSIK-UMSKZ " Umsatzkennzeichen
BSIK-BLART " Belegart
BSIK-ZUONR " Zuordnungsnummer
BSIK-BELNR " Belegnummer
BSIK-BUZEI " Belegzeile
INTO HEADER.
INSERT
Addressdaten
ADRS-LINE0 " 1. Zeile Adressenaufbereitung
ADRS-LINE1 " 2. " "
ADRS-LINE2 " 3. " "
ADRS-LINE3 " 4. " "
ADRS-LINE4 " 5. " "
ADRS-LINE5 " 6. " "
ADRS-LINE6 " 7. " "
ADRS-LINE7 " 8. " "
ADRS-LINE8 " 9. " "
ADRS-LINE9 " 10." "
Umsatzdaten
C-KUMUM " Umsatz
C-BABZG " Berechtigt. Abzuege
C-UABZG " Unberechtigt. Abzuege
C-KZINS " Zinszahlungen
C-KUMAG " Kum. Jahresausgleich
Obligos
C-SALDO " Saldo ohne SHB-Vorgänge
C-UMKZ1 "SHBKZ 1
C-SUMS1 "Sonderumsatz 1
C-UMKZ2 "SHBKZ 2
C-SUMS2 "Sonderumsatz 2
C-UMKZ3 "SHBKZ 3
C-SUMS3 "Sonderumsatz 3
C-UMKZ4 "SHBKZ 4
C-SUMS4 "Sonderumsatz 4
C-UMKZ5 "SHBKZ 5
C-SUMS5 "Sonderumsatz 5
C-UMKZ6 "SHBKZ 6
C-SUMS6 "Sonderumsatz 6
C-UMKZ7 "SHBKZ 7
C-SUMS7 "Sonderumsatz 7
C-UMKZ8 "SHBKZ 8
C-SUMS8 "Sonderumsatz 8
C-UMKZ9 "SHBKZ 9
C-SUMS9 "Sonderumsatz 9
C-UMKZ10 "SHBKZ 10
C-SUMS10 "Sonderumsatz 10
C-SONOB " Sonst. Obligen
Limits
C-AGOBLI " Absolutes Gesamtobligo
Zahlungdaten
LFB1-ZTERM "Zahlungsbedingung
LFB1-ZAHLS "Sperrschlüssel für Zahlung
LFB1-ZWELS "Zahlwege
LFB1-XVERR "Zahlungsverrechnung
LFB1-WEBTR "Wechsellimit
LFB1-BUSAB " Sachbearbeiter
lfa1-sortl
lfa1-land1
INTO STAMMDATEN.
INSERT
RTAB-RAART "Rasterart
RTAB-SPERR "gesperrte Posten
RTAB-KUMUM "Umsatz
RTAB-ANZAH "Anzahlungen
RTAB-OPSUM "Offene Posten Summe
RTAB-RAST1 "Rasterfeld 1
RTAB-RAST2 "Rasterfeld 2
RTAB-RAST3 "Rasterfeld 3
RTAB-RAST4 "Rasterfeld 4
RTAB-RAST5 "Rasterfeld 5
RTAB-RAST6 "Rasterfeld 6
INTO OP-RASTER.
INSERT
BSIK-BUDAT " Buchungsdatum
BSIK-BLDAT " Belegdatum
BSIK-CPUDT " CPU-Datum
BKPF-USNAM " User-ID
BSIK-WAERS " Wahrungsschluessel
BSEGA-NETDT " Nettofaelligkeitsdatum
FAEDE-NETDT " Nettofaelligkeitsdatum
BSIK-ZFBDT " Zahlungsfristen-Basisdatum
BSIK-BSCHL " Buchungsschluessel
BSIK-ZLSCH " Zahlungsschluessel
BSIK-MANST " Mahnstufe
SHBETRAG " Hauswaehrungsbetrag
BSEGA-DMSHB " Hauswaehrungsbetrag
BSEGA-WRSHB " Fremwaehrungsbetrag
INTO EINZELPOSTEN.
BEGIN_OF_BLOCK 1.
*ELECT-OPTIONS:
GESBER FOR BSIK-GSBER.
PARAMETERS:
MONAT LIKE RFPDO-DOPRBMON.
SELECT-OPTIONS:
KKSALDO2 FOR RFSDO-KOPRSAL2, "Saldovortrag
AGOBLIG2 FOR RFSDO-KOPRAGO2. "Absolutes Obligo
RGOBLIGO FOR RFSDO-DOPRRGOB. "Relatives Obligo
SELECT-OPTIONS:
LAND FOR LFA1-LAND1,
KONTENGR FOR LFA1-KTOKK,
SACHBEAR FOR LFB1-BUSAB,
AKONTS FOR LFB1-AKONT,
AKONTP FOR BSIK-HKONT.
SELECT-OPTIONS:
BUDAT FOR BSIK-BUDAT,
BLDAT FOR BSIK-BLDAT,
NETDT FOR BSEGA-NETDT.
PARAMETERS: N_BELEGE LIKE RFPDO-BPETNBEL
DEFAULT 'X', "Normale Belege.
STAT_BLG LIKE RFPDO-BPETSBEL. "Statistische Belege
END_OF_BLOCK 1.
*ELECT-OPTIONS:
BERABZU1 FOR LFC1-BABZG,
UNBABZU1 FOR LFC1-UABZG,
ZINSE1 FOR LFC1-KZINS,
JHRAUSG1 FOR LFC1-KUMAG.
BERABZUG FOR BEABZUG NO-DISPLAY, "Berechtigter Abzug
UNBABZUG FOR UBABZUG NO-DISPLAY, "Unberechtigter Abzug
ZINSEN FOR KUMZINS NO-DISPLAY, "Kumulierter Zins
JHRAUSGL FOR JAHRAUG NO-DISPLAY. "Kumulierter Jahresausgl.
BEGIN_OF_BLOCK 2.
PARAMETERS:
SORTART LIKE RFPDO1-KOPRSOAR DEFAULT '1', "Doku
VERDICHT LIKE RFPDO1-KOPRVERD DEFAULT '1', "Doku
RASTVERD LIKE RFPDO1-KOPRRAST DEFAULT '0', "Doku
KONZVERS LIKE RFPDO-DOPOKONZ, "Konzernversion
XBUKRDAT LIKE RFPDO3-ALLGBUKD DEFAULT 0, "Bukr.daten
KAUSGABE like rfpdo3-ALLGKAOR.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 01(30) TEXT-030.
PARAMETERS: RART-NET LIKE RFPDO-DOPRRNET DEFAULT 'X'.
SELECTION-SCREEN COMMENT 33(01) TEXT-028.
PARAMETERS: RART-SKT LIKE RFPDO-DOPRRSKT DEFAULT 'X'.
SELECTION-SCREEN COMMENT 35(01) TEXT-028.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: RART-ALT LIKE RFPDO1-KOPRRALT DEFAULT 'X'.
SELECTION-SCREEN COMMENT 03(28) TEXT-031.
SELECTION-SCREEN POSITION POS_HIGH.
PARAMETERS RBLDAT LIKE RFPDO2-KORD10BD.
SELECTION-SCREEN COMMENT 61(12) TEXT-032.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN COMMENT 37(01) TEXT-028.
PARAMETERS: RART-UEB LIKE RFPDO-DOPRRUEB DEFAULT 'X'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 01(31) TEXT-026.
PARAMETERS: RASTBIS1 LIKE RFPDO1-ALLGROGR DEFAULT '000'.
SELECTION-SCREEN COMMENT 35(02) TEXT-027.
PARAMETERS: RASTBIS2 LIKE RFPDO1-ALLGROGR DEFAULT '020'.
SELECTION-SCREEN COMMENT 41(02) TEXT-027.
PARAMETERS: RASTBIS3 LIKE RFPDO1-ALLGROGR DEFAULT '040'.
SELECTION-SCREEN COMMENT 47(02) TEXT-027.
PARAMETERS: RASTBIS4 LIKE RFPDO1-ALLGROGR DEFAULT '080'.
SELECTION-SCREEN COMMENT 53(02) TEXT-027.
PARAMETERS: RASTBIS5 LIKE RFPDO1-ALLGROGR DEFAULT '100'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 01(31) TEXT-029.
PARAMETERS: FAKTOR LIKE RFPDO-DOPRFAKT DEFAULT '0'.
SELECTION-SCREEN COMMENT 35(1) TEXT-028.
PARAMETERS: STELLEN LIKE RFPDO-DOPRFAKT DEFAULT '0'.
SELECTION-SCREEN END OF LINE.
PARAMETERS: PZUOR LIKE RFPDO2-DOPRZUOR.
PARAMETERS: UMSATZKZ LIKE RFPDO1-DOPRSHBO. "DEFAULT 'WSABIMVD'.
PARAMETERS:
TITLE LIKE RFPDO1-ALLGLINE,
LISTSEP LIKE RFPDO-ALLGLSEP,
MIKFICHE LIKE RFPDO-ALLGMIKF.
PARAMETERS:
P_LVAR LIKE Gs_VARIANT-VARIANT DEFAULT SPACE modif id 508.
END_OF_BLOCK 2.
AT SELECTION-SCREEN OUTPUT.
if acc_mode is initial.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = '508'.
SCREEN-active = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
endif.
AT SELECTION-SCREEN ON AKONTS.
Konvertierung der Kontonummer
LOOP AT AKONTS.
PERFORM ALPHAFORMAT(SAPFS000)
USING AKONTS-LOW AKONTS-LOW.
PERFORM ALPHAFORMAT(SAPFS000)
USING AKONTS-HIGH AKONTS-HIGH.
MODIFY AKONTS.
ENDLOOP.
AT SELECTION-SCREEN ON AKONTP.
Konvertierung der Kontonummer
LOOP AT AKONTP.
PERFORM ALPHAFORMAT(SAPFS000)
USING AKONTP-LOW AKONTP-LOW.
PERFORM ALPHAFORMAT(SAPFS000)
USING AKONTP-HIGH AKONTP-HIGH.
MODIFY AKONTP.
ENDLOOP.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_LVAR.
Gs_VARIANT-REPORT = SY-REPID.
Gs_VARIANT-VARIANT = P_LVAR.
PERFORM F4_FOR_S_LVAR USING Gs_VARIANT.
P_LVAR = Gs_VARIANT-VARIANT.
AT SELECTION-SCREEN.
IF NOT RASTBIS5 IS INITIAL.
IF RASTBIS5 GT RASTBIS4
AND RASTBIS4 GT RASTBIS3
AND RASTBIS3 GT RASTBIS2
AND RASTBIS2 GT RASTBIS1.
ELSE.
MESSAGE E379.
ENDIF.
ELSE.
IF NOT RASTBIS4 IS INITIAL.
IF RASTBIS4 GT RASTBIS3
AND RASTBIS3 GT RASTBIS2
AND RASTBIS2 GT RASTBIS1.
ELSE.
MESSAGE E379.
ENDIF.
ELSE.
IF NOT RASTBIS3 IS INITIAL.
IF RASTBIS3 GT RASTBIS2
AND RASTBIS2 GT RASTBIS1.
ELSE.
MESSAGE E379.
ENDIF.
ELSE.
IF NOT RASTBIS2 IS INITIAL.
IF RASTBIS2 GT RASTBIS1.
ELSE.
MESSAGE E379.
EHi Laxman,
I have checked the program and found out following:
the field "acc_mode" which gets populated by FM "GET_ACCESSIBILITY_MODE".
If this field is initial, then normal list gets displayed and
If this field has value, then ALV grid gets displayed.
regards,
Dharitree -
Changes in SAP Standard report RVKRED01
Hi,
I am adding two fields(VBELN, VENDDAT) from VEDA table to SAP Standard report RVKRED01.
I am not understanding the code in that report...how can i add those 2 fields in that report?
anybody has an idea?
Thank in advance,
fractal.You can do append structure in table VEDA and add your two filds and populate the data in the following user_exit
Transaction Code - VKM4
FV45K001 User exit for determining the credit control area
Hope thisll give you idea!!
<b>P.S award the points.</b>
Good luck
Thanks
Saquib Khan
"Some are wise and some are otherwise" -
Any SAP standard report is used to retrieve the inventory number based Asse
Hi all
Any SAP standard report is used to retrieve the inventory number based Asset ID.
Please help us to provide the standard report.
Regards
K.GunasekarHi,
Create the Sort version with field Inventory no, so that you can display Inventory no details in all Asset report.
You can get "Inventory no" details by including field "INVNR" in Sort versions for Asset reporting(T.code - OAVI).
Hope this information helpful for you.
Thanks & Best Regards,
M.Ganesan -
SAP standard report to show Inter Company transactions
Basically, we have two companies that are buying and selling between each other. One of the companies is a subsidery of the other. So, the parent(x) can sell or buy from it's sub(Y) and visa versa. At the end of the period, we need to consolidate both companies for reporting purposes, therefore there will be elimination entries which should be identified.
I need an SAP standard report to show these transactions which might still be sitting on each other books unsoldDear :
We are using ECC 6 SAP version and we have the t code FBU3 for displaying all inter company transactions. Have you done necessary configuration in OBYF. You can display all related inter company transactions through FBU3.
Your 2nd query corresponds to same credit control area that was assigned to two company codes. In order extend credit limit for a customer who is extended on two company codes which have same credit area. It is not possible you distinguish credit limit for a customer who is extended on two company codes having same credit control areas. CCA is defined at organization structure level and for the distinction you will have to define new credit control area in customization at
enterprise level i-e
Enterprise Structure.... Definition.... Financial accounting....define credit control area
Assignment.....Assign credit control area to co code
Do necessary customization for SD module
and then in credit management for AR you will have to assign the credit control area to company codes i-e
Account Recv/A/c Payable.....Credit Management.... Assign permitted CCA to Co code
. This is the only way to to segregate customer credit limit for two company codes. Please revert in case of any confusion.
Regards
Maybe you are looking for
-
VGA monitor and a 2010 Mac Mini - HELP PLEASE!
I just upgraded from the early 2009 model where all you needed was a VGA to mini DVI adapter. With this 2010 model, Im not sure if thats possible (for cheap anyway). I have a VGA monitor and all I want to do is hook it up to the new mac mini ...but h
-
Server connection: drops and disk errors
Currently, I'm the only workstation using a Mac Pro (the rest are G5s), and my connection to our art server (running Win 2003) constantly drops, whereas the G5s stay connected just fine. Also, today this same server started giving me code -41 disk er
-
Debit memo request generated second time as opposite ?
Once a month we create debit memo requests from the serviceorders that are completed. normally that is not a problem but now we noticed that because someone forgot to TECO an serviceorder that was billed individually that a new memo request was batch
-
So I purchased an iPhone 4 and activated it with my number. Verizon account says phone is activated with my number, and I set it up with iTunes and all that good stuff. However, I can't get any service at all. The rest of my family all has iPhone
-
does iPhoto come with this??