10g express, how to change port number for the database home page

10g express uses port 8080 for its http listener. However this number has been used by Tomcat on my computer. How can I chang the port number for the 10g home page?
Regards
jl

Andy, thank you very much, I have been able to changed the port number following your advice.
I hope you do not mind I ask a further questions along this line:
I installed 10 express db on 2 computers. One with Tomcat and the other without. Following your advice, I successfully changed the port number on the one without Tomcat.
On the one with Tomcat, I believe it was because I installed the 10g express while the Tomcat was running, I can neither go to the 10g's home page (page cannot be displyed), nor logon to the database from sqlplus (ora-12560: TNS:protocal error) even after I shut down the Tomcat. By checking with 'netstat -an', it is known that the http listerner is not listerning.
Can I change some configuration file to solve this problem? Or do I have to reinstall 10 ex? I prefer the 1st aproach of changing config file, even it is not as easy as reinstallation.
Thanks
jl

Similar Messages

How to change port settings for email on N72?

I'm trying to use Gmail on my N72 via IMAP. Gmail's help article states that I need to use port 587 for outgoing mail. However, I can't find any place in settings where I would be able to manually specify the port number. The email settings page only gives me three options under Security/Port label and all of them have pre-defined ports.
Any ideas?

hmmm that is strange tho i have an n series under port i have a predefined option as well as when i click on the port i can manually define the port in the incoming and outgoing messaging options
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

How to generate BP number for the employee (ECC to CRM) ...

Hi all,
can any one give solution for ,how to generate BP number for the employee from ECC to CRM other than active status,as i downloaded employee data from ECC to CRM through ALE/IDOC,as only active employment status employees are got BP number generated,remaining also transfered to CRM but BP number is not generated for those employees,these employee records i can able to see in the HRP5580- HRP5587 tables.
thanks in advance.
vamshi.
Message was edited by:
vamshidher rao

Hi,
Or are you looking for this:
SELECT serial_number, paaf.assignment_number
FROM pay_assignment_actions paa, per_all_assignments_f paaf
WHERE action_status = 'C'
AND paaf.assignment_id = paa.assignment_id
AND serial_number IS NOT NULL
AND SYSDATE BETWEEN paaf.effective_start_date AND paaf.effective_end_date;
- Viky
Edited by: Viky on Dec 17, 2010 11:42 AM

How to change a connection with the database in Runtime?

How to change a connection with the database in Runtime?
My connection was made using ADF Business component (ApplicationModule).
ADF Swing.
JDeveloper Studio 11.1.1.4.0.

When deploying ADF applications with database connection, you should be using JDBC data sources configured in the weblogic server.
You could change the JDBC data sources to a different DB instance or location - by changing the JDBC data source and restarting the weblogic server.
For more details, check
http://techiecook.wordpress.com/2010/12/02/oracle-weblogic-adf-datasources/
Thanks,
Navaneeth

How to create TABLE using "Go To Database Home Page"

I installed Oracle 10g Express
The Database Home page is working fine using sys/system user name
I understand that this is also an APEX INTERNAL Application.
Now I installed APEX 3...latest version , the database page has now changed to APEX , Oracle Application Express page.
Also the http://.../apex/apex_admin .. is working, but I dont know where to find the Administration page of Database , which lets creation of database users & tables

Hi
If I understand you problem correctly then you go to Database Homepage, and login using sys/system you can see the homepage with the icons for 'Application Builder', 'SQL Workshop', 'Utilities'.
Here clicking on 'SQL Workshop' you will find 'Object Browser', 'Sql Commands', 'SQL Scripts' and 'Query Builder'.
You can create database objects by entering sql commands in 'Sql Commands' or from the 'Object Browser'->[Create] button.
-Priyanka

Oracle 10g XE - unable to connect to the database home page

Hi,
I have installed Oracle 10g XE on my computer. When I try to open the Database home page at http://127.0.0.1:8080/apex, I get a Page not found error.
I have followed the steps outlined in the forums-
a) did "netstat -a"
Output : found that port 8080 isn't being used.
b) did "lsnrctl status"
Output: under Services summary - instance "CLRExtProc" is unknown
- instance "PLSExtProc" is unknown
- instance "xe" is ready
- instance "xe_xpt" is ready
c) did "sqlplus / as sysdba"
Output : Connected to Oracle 10g Express Edition
d) did "select status from v$instance "
Output : Mounted
e) did "select open_mode from v$database"
Output : Mounted
f) did "startup"
Output : started the database
Not sure why the database home page still wouldn't open. Any help is appreciated.

Hi,
>>What is the command to change the status to "READ WRITE" ?
C:\>sqlplus / as sysdba
SQL*Plus: Release 10.2.0.1.0 - Production on Sat Mar 29 00:26:33 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to an idle instance.
SYS@XE> startup mount
ORACLE instance started.
Total System Global Area 188743680 bytes
Fixed Size                  1286460 bytes
Variable Size              92278468 bytes
Database Buffers           92274688 bytes
Redo Buffers                2904064 bytes
Database mounted.
SYS@XE> select open_mode from v$database;
OPEN_MODE
MOUNTED
SYS@XE> select status from v$instance;
STATUS
MOUNTED
SYS@XE> alter database open;
Database altered.
SYS@XE> select open_mode from v$database;
OPEN_MODE
READ WRITE
SYS@XE> select status from v$instance;
STATUS
OPENCheers
Legatti

Changing port number for mobile server after installation

hi,
i am using windows 2003 server release 2,oracle 11g database R2 and oracle database lite 10g R3. i have installed mobile server successfully with port 80 but when i start the mobile server i receive an error stating that the port 80 is already in use. Now i need to change the port number of the mobile server. can anyone tell me the solution.

If the Oracle Lite installation type is STANDALONE , then to change the Olite port number to any other available free port number , you have to edit the file default-web-site.xml or http-web-site.xml file present in $OLITE_HOME/mobile_oc4j/j2ee/mobileserver/config directory.
You can change the port any time in http-web-site.xml file and bounce the services, the new port will take effect.

Port number for the application

Hi...i'm working on SMS apps...
it's a peer2peer sms apps..and to send a message to the application in the other mobile...we need to specify the port number where the application located....
right now my apps is already able to send msg and received by other phone which do not have the same apps...
so now i want to specify the port number so ythe msg can be specificaly received by the apps..
My question is...how do we know or how do we set the port number?
thx 4 the reply...

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen
If anyone else in the forum has some advice, please reply to this thread.
Thank you for posting.

How can i use AME for the new OAF page.

Dear all,
I have developed a new OAF page and registered under Employee Self Service.
How can i use AME for the approval process.
Appreciate your ideas?
zamora

I will try to answer based on my experience of working with iProcurement and AME. It depends on how you want to make a call to AME , directly from OAF Page or from Workflow and your requirement. You didn't specify what you want to show the users on OAF Page and your business requirement.
Before calling AME Engine from the OAF page or workflow, I guess you did already setup AME Transaction Type and it's Approval Groups, Conditions, Action Types and Rules. Do some testing from AME Business Analyst Test Workbench. Please note that, AME provides lot of PL/SQL API's that you have to call from your programs (java or workflow pl/sql)
Let's look at the workflow and putting an OAF Page as notification.
As Sameer said, you have kick-off workflow process from PR of CO and with in the workflow function, you make a call to AME Engine API's with the AME Transaction ID. This transactionId belongs to the AME Transsaction Type that you setup. Based on the rules setup, AME Engine generates list of approvers/approver and stores them AME Tables for that transactionId. Then, it sends a notification to the approver.
In the workflow, where that notification is defined, in the message body you have to put an attribute(&XX_WF_FWK_RN) of type document/send. And this attribute will have the constant JSP:/OA_HTML/OA.jsp?OAFunc=XX_FUNC&paramId=-&DOCUMENT_ID-. This function is SSWA Jsp function that makes a web html call to your OAF Region.
If your requirement is to just show the list of approvers on the OAF Page, you may have to call AME API diectly passing your AME TrasnactionId with other parameters. Then AME generates list of approvers and stores them in AME tables with each approver status. You can pickup those approvers using VO and show them on OAF Page.
Hope this gives some idea.

Change port number for Oracle Microsoft Transaction Services - How????

Hi All,
I reasonably new to this DBA role and was doing an install of Oracle 9i on a new server, (only done an Oracle install about 3 times). Our senior DBA was out so when the screen came up asking for the port to use for MTS I couldn't remember if I should take the default (2030) or put something different in there, so I IM'ed our senior DBA and he told me to use 1521, (our listener port), by mistake. So when I finally get Oracle installed and runing I can't use 1521 with the listener as it tells me it is already being used. I know we don't have to use 1521, but I would like to so we are consistent. In order to use 1521 I need to change the port for MTS back to 2030.
I've searched and searched and since we don't use MTS I cannot figure out where to change the port back to 2030. If someone could tell me in simple steps how to change this it would be really really appreciated.
Thanks
Gordon

If operating system is windows then open registry, find oracle under local system/software,then find oracle MTS in right side u will see word "port"
right click and modify its value as req
Ramchandra

How to change phone number for key chain verification

I've entered a wrong mobile phone number for receiving the key chain verification code.
How can I change this phone number?

Well, the only way I found is to reset iCloud Keychain entirely. Go to System Preferences->iCloud->Keychain, put in your password to your Apple ID, and click "Forgot code?" on the next screen. You'll be prompted to reset Keychain entirely, which you will have to do in order to change your number, unless you have AppleCare, in which case you can call them and have them set it up for you.

How to change port number of OEM grid 11gR1

As we all know, in OEM grid 11gR1 instalation, OEM has assigned it self a defult port 7799 ( https://localhost.com:7799/em/console/logon/logon). How can we change this port and which service we need to restart.

The easiest way I've found to do it is through the WebLogic console. Select the configuration tax for the services and drill down to the post you want to change. You will need to bounce the OMS (from inside WLS console)

How to Remove port number for SIP trunk in CME

Hi,
I trying to set a SIP trunk with SIP provider, I have CME 7.1
The trunk is registered now but I can´t make calsl via SIP provider. After some debbugs sip provider's staff told me that the solution is not
not append the port in the INVITE.
Is it possible to do this?, How?
I have found some info about normalization but is relating to CM server not CME.
regards

what port number does your provider use for signalling? They need to provide you the port number if its different from the standard 5060..
You can then configure the signalling ports on your dial-peer as shown in example below..where port 5081 is used here
dial-peer voice 1 voip
destination-pattern .T
session protocol sipv2
session target ipv4:10.10.10.24:5081
Please rate all useful posts
"opportunity is a haughty goddess who waste no time with those who are unprepared"

Change port number for EM

I had to recreate EM due to machine name and db domain (etc.) changes. And now the port number is 5502 instead of default 5500. Is there an easy way to set it back to 5500? Thanks.

Do you have any problem running this with the new port number? If no, you can leave it as it is because Oracle Installation picked the next available port number starting from 5500. So it is not a prblem running it with the new port number.
If you must change it, then do the following
Stop DB Console
Change the ConsoleServerPort property in $ORACLE_HOME\<hostname_sid>\sysman\config\emoms.properties
Change the REPOSITORY_URL property in $ORACLE_HOME\<hostname_sid>\sysman\config\emd.properties
Change all occurrence of old port to new port in $ORACLE_HOME\oc4j\j2ee\<hostname_sid>\config\http-web-site.xml
Start DB Console
Note that $ORACLE_HOME is where your installation is
e.g D:\oracle\ora10g
Hope this helps

How to change phone number for a facetime contact

; the number i used to call (mobile) isn't chosen and i can't dial it in facetime
I used to click facetime and choose my friend's mobile phone number. Now it just dials a number it found in the contact's list, even though i changed it.

Well, the only way I found is to reset iCloud Keychain entirely. Go to System Preferences->iCloud->Keychain, put in your password to your Apple ID, and click "Forgot code?" on the next screen. You'll be prompted to reset Keychain entirely, which you will have to do in order to change your number, unless you have AppleCare, in which case you can call them and have them set it up for you.

10g express, how to change port number for the database home page

Similar Messages

Maybe you are looking for