10gR2 install on RHEL4, Intelx86, using 10gR2 on GFS file system.

cat ocrconfig_12971.log
Oracle Database 10g CRS Release 10.2.0.1.0 Production Copyright 1996, 2005 Oracle. All rights reserved.
2005-10-13 14:57:41.376: [ OCRCONF][4142143168]ocrconfig starts...
2005-10-13 14:57:41.377: [ OCRCONF][4142143168]Upgrading OCR data
2005-10-13 14:57:41.409: [ OCROSD][4142143168]utstoragetype: /u00/oracrs/crs is on FS type 18225520. Not supported.
2005-10-13 14:57:41.410: [ OCROSD][4142143168]utopen:6'': OCR location /u00/oracrs/crs configured is not valid storage type. Return code [37].
2005-10-13 14:57:41.410: [ OCRRAW][4142143168]proprinit: Could not open raw device
2005-10-13 14:57:41.410: [ default][4142143168]a_init:7!: Backend init unsuccessful : [37
Any help on above appreciated.... it is RHEL4, Intelx86 (32bit), using 10gR2 on GFS file system.
is this supported?

Hi Owen,
We have experienced the exact identical errors when installing 10g R2 on the same o/s version.
We tested a bypass of that error by clicking continue on the error window and let the install 'complete'.
We then attempted to start an existing 10.1.0.4 instance and the error libkaio.so.1 not found occurred. I then ldd oracle and discovered the /usr/libaio.so.1 was not found. It turns out we downloaded and installed the libaio_64 rpm then executed relink all. The link completed successfully and we were able to start the instance then manually upgrade it to 10.2.0.1.
It's my feeling that the lib file versions (32 vs 64 bit) play a roll in th eerrors occurring during this new install.
We are opening a TAR about the install errors regarding rmem an wmem kernel parameters and the swap space requirements documented and the associated error.
This forum by the way has a faster time to discussion than Metalink does!
Regards,
Tracy Davis
Bonneville Power Administration

Similar Messages

How to Create a OLAP Cube in DEV using SSAS from Raw file system backup from Production?

How to Create a OLAP Cube in DEV using SSAS from Raw file system backup from Production? I dont have a .abf file available. Two paritions in production are missing data. We were able to get back file system backup which contains the files for these two paritions.
How do I create a cube in Dev using this file system backup.
we are on SQL Server 2008R2.
Thanks,

How to Create a OLAP Cube in DEV using SSAS from Raw file system backup from Production? I dont have a .abf file available. Two paritions in production are missing data. We were able to get back file system backup which contains the files for these two paritions.
How do I create a cube in Dev using this file system backup.
we are on SQL Server 2008R2.
Thanks,

[solved] scritpt to check the used space of different file systems

how to write a scritpt to check the used space of different file systems and print if any file system above 50%
I used this command to get the different filesystem and their used space
df -h | grep -v Filesystem |tr -s " " | cut -d" " -f1,5
Thanks in Advance

Please try this command:
df -Ph | tr -s " " | cut -d" " -f1,5 | sed -n "s/$[5-6][0-9]%$\|$[0-9]\{3\}%$/&/p"
It works for me. Good luck
Tiger Zhang
.

CE71SR5 install failure (Start SAP Secure Store in the File System)

Hi!
when i install CE71SR5 CompositionPlatform,met a question, below is the log information, waiting help,thanks.
An error occurred while processing service SAP NetWeaver CE Developer Edition > SAP NetWeaver CE Development System( Last error reported by the step :Cannot create the secure store. SOLUTION: See output of log file SecureStoreCreate.log: INFO: Loading tool launcher... INFO: [OS: Windows XP] [VM vendor: SAP AG] [VM version: 5.1.021] [VM type: SAP Java Server VM] INFO: Main class to start: "com.sap.security.core.server.secstorefs.SecStoreFS" INFO: Loading 8 JAR files: [C:\usr\sap\CE1\SYS\global\security\lib\tools\iaik_jce.jar, C:\usr\sap\CE1\SYS\global\security\lib\tools\iaik_jsse.jar, C:\usr\sap\CE1\SYS\global\security\lib\tools\iaik_smime.jar, C:\usr\sap\CE1\SYS\global\security\lib\tools\iaik_ssl.jar, C:\usr\sap\CE1\SYS\global\security\lib\tools\w3c_http.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcexceptionimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcloggingjavaimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcsecsecstorefsjavacore.jar] INFO: Start SAP Secure Store in the File System - Copyright (c) 2003 SAP AG FATAL: Main class "com.sap.security.core.server.secstorefs.SecStoreFS" cannot be started: java.lang.ExceptionInInitializerError at javax.crypto.Cipher.getInstance(DashoA12275) at javax.crypto.Cipher.getInstance(DashoA12275) at iaik.security.provider.IAIK.a(Unknown Source) at iaik.security.provider.IAIK.addAsJDK14Provider(Unknown Source) at iaik.security.provider.IAIK.addAsJDK14Provider(Unknown Source) at com.sap.security.core.server.secstorefs.Crypt. (Crypt.java:85) at com.sap.security.core.server.secstorefs.SecStoreFS.setSID(SecStoreFS.java:175) at com.sap.security.core.server.secstorefs.SecStoreFS.handleCreate(SecStoreFS.java:836) at com.sap.security.core.server.secstorefs.SecStoreFS.main(SecStoreFS.java:1306) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:161) Caused by: java.lang.SecurityException: Cannot set up certs for trusted CAs at javax.crypto.SunJCE_b. (DashoA12275) ... 14 more Caused by: java.lang.SecurityException: Cannot locate policy or framework files! at javax.crypto.SunJCE_b.i(DashoA12275) at javax.crypto.SunJCE_b.g(DashoA12275) at javax.crypto.SunJCE_r.run(DashoA12275) at java.security.AccessController.doPrivileged(Native Method) ... 15 more FATAL: com.sap.engine.offline.OfflineToolStart will abort now with exitcode 2.). You may now
choose Retry to repeat the current step.
choose View Log to get more information about the error.
stop the task and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/CE71_DEV_ADA/INSTALL.

I have the same problem.
Although i try it use jdk1.5.0.16, the same err occured.
Also i use the jce_policy-1_5_0.zip.
I will appreciate your answer.
I have resolved the problem by copy the
local_policy.jar
US_export_policy.jar
to
sapinst_instdir\CE71_DEV_ADA\INSTALL\sapjvm\sapjvm_5\jre\lib\security
Edited by: wang zhen on Aug 28, 2008 11:08 AM
Edited by: wang zhen on Aug 29, 2008 9:53 AM

Using ufsrestore on multiple file systems

I have a ufsdump script that allows me to backup the file systems on c0t0d0 all at once. Now I am looking for a way to restore all of these file systems at one time using a script. I would greatly appreciate any help.
Cletus

Is this the boot disk ?

How increase external disk size used for an existing file system, Solaris10

Configuration:
Server: Sun T5220
S/O: Solaris 10 5/08 s10s_u5wos_10 SPARC
Storage: EMC AX4-5
EMC PowerPath: PowerPath Version 5.2
I have the following scenario:
In AX4-5 storage array, I created two LUNs into RAID Group 10, with Raid Type1/0:
LUN 101: 20Gb
LUN 102: 10Gb
Both LUNs were added to Storage Group (SG1) that includes two Servers (Server1 and Server2); both servers have Operating System Solaris 10 5/8 and Power Path.
The servers detect both LUNs across two paths. With Power Path were created a virtual path (emcpower0a, emcpower1a) to access to each LUNs respectively.
We have mounted two file system /home/tes1 over emcpower0a -> LUN101 and /home/tes2 over emcpower1a -> LUN102.
Filesystem size used avail capacity Mounted on
/dev/dsk/emcpower0a 20G 919M 19G 5% /home/test1
/dev/dsk/emcpower1a 10G 9G 1G 90% /home/test2
I want to increase the space in file system /home/test2, without lost the information that I have stored and using the same LUN, LUN 102. To do this I start with the following steps:
1- Create new LUN, LUN 103 with 15Gb into RAID Group 10. Result: OK, I have available space in RAID Group 10.
2- Add LUN 103 to LUN 102, using concatenation option. Result: OK. This action creates a new metaLUN with the same characteristics of LUN 102, but with new space of 25Gb.
After to do these actions, I want to know how Solaris recognize this new space. What I need to do, to increase the size of file system /home/test2 to 25 Gb. Is that possible?
I reviewed the description of each disk using format command, and the disks not have any change.
Could anyone help me? If you need more detail, please do not hesitate to contact me.
Thanks in advance.

Robert, thank a lot for your know how. You helped me to clarify some doubts. To complete your answer, I will add two more details, based on my experience.
After to execute, type -> auto configure and label, the disk was created with different partitions like root, swap, usr, like this:
Volume name = < >
ascii name = <DGC-RAID10-0223 cyl 49150 alt 2 hd 32 sec 12>
pcyl = 49152
ncyl = 49150
acyl = 2
nhead = 32
nsect = 12
Part Tag Flag Cylinders Size Blocks
0 root wm 0 - 682 128.06MB (683/0/0) 262272
1 swap wu 683 - 1365 128.06MB (683/0/0) 262272
2 backup wu 0 - 49149 9.00GB (49150/0/0) 18873600
3 unassigned wm 0 0 (0/0/0) 0
4 unassigned wm 0 0 (0/0/0) 0
5 unassigned wm 0 0 (0/0/0) 0
6 usr wm 1366 - 49149 8.75GB (47784/0/0) 18349056
7 unassigned wm 0 0 (0/0/0) 0
This was not convenient because all information stored appear in the first slice and growfs not work if appear root or swap slice into the disk, for that reason was necesary to recreate manually every slice with partition command. The final result was this:
Part Tag Flag Cylinders Size Blocks
0 unassigned wm 0 - 49149 9.00GB (49150/0/0) 18873600
1 unassigned wu 0 0 (0/0/0) 0
2 backup wu 0 - 49149 9.00GB (49150/0/0) 18873600
3 unassigned wm 0 0 (0/0/0) 0
4 unassigned wm 0 0 (0/0/0) 0
5 unassigned wm 0 0 (0/0/0) 0
6 unassigned wm 0 0 (0/0/0) 0
7 unassigned wm 0 0 (0/0/0) 0
Now, execute again the label command to save the new information.
Mount file system and execute:
growfs M file_system mount_point to expand the file system to 9Gb.

Using intermedia search on file system

I know it is possible to intermedia index documents stored on a file system.
Is it possible to integrate this search into the standard search facility in portal ?
ps, we don't want to use ifs in this case.
regards,
Terje
null

Terje
Intermedia only indexes documents stored in the database - today. Look for a new feature in the Oracle9i Database that extends Intermedia indexing to file system-based content. In the meantime, check out our search partners Verity, Autonomy and Altavista and their portlets at: http://www.oracle.com/portals/partners/ppi/index.html?comp1.html
null

During Windows install, says the Bootcamp Windows partition is incorrect file system and won't install

I had another Macbook Pro retina which I installed Windows 8 on with no problems via bootcamp. I just updated to the late 2013 model of the Macbook Pro, and attempted to do the same thing but have had problems. I create the partition for Windows with Bootcamp, restart the computer, and after I enter my security key in the Windows installation screen it comes to the screen where you have to select the appropriate installation drive. When I select the drive I created for Windows, it says that it can't install due to the file system. I have no idea why I'm having this problem because I had done this once before....I can't for the life of me figure out what's wrong and I'm at a loss.
If anyone can point me in the right direction I will greatly appreciate it...also let me know if there are differences from the early 2013 model and late 2013 model that would've created this problem. Thanks!!
Robert

Well, here is what happened...
Somehow in making a Windows partition then removing the partition so many times I created an error where it only showed 1/2 of my hard drive...like it was starting to create the second half for the windows side and ran into an error.
So this turned out to be a blessing in disguise, because what I had to do was go to "Command + R" when I was starting up and format the entire drive, all 500 gb. This formatted the whole drive and must've erased whatever was causing the trouble.
Of course, then I had to reinstall OS X, and reinstall my Time Machine backup, but then I opened bootcamp and created the Windows partition again. This time, when I ran the EFI installer you were referring to on the far right (which I had tried before), it allowed me to click next and continue once I selected the Windows partition. Thank God! It must've fixed whatever file system error was hanging it up there every time....because it's installing now.
What I would suggest if all else fails, just format the whole dang thing. Then try from square one and see if you can install

X86_64 10gR2 install on RHEL4 ES x86_64 fails

After getting the nice new x86_64 10gR2 release, I excitedly unpacked it and ran the installer (after just installing 10gR1 the other day). Everything went along nicely until it failed in linking 'INFO: - Linking liborasdkbase'. Operator error? It seems I had all the prerequisite packages installed. Also, I noticed there was a bin-utils bug noted earlier this year that generated the relocation R_X86_64_PC32 against `_memcpy_mem_ops_method' can not be used' message, but I have no idea if that is relevant here.
Two relevant sections of the installer log file:
1. First, just above the final failure, I noticed there was a gcc usage error on libsrvm generation:
INFO: /usr/bin/gcc -o libsrvm10.so -u Java_oracle_ops_mgmt_nativesystem_Native_getEnvironment -u Java_oracle_ops_mgmt_nativesystem_Native_getRDBMSVersion -u Java_oracle_ops_mgmt_nativesystem_UnixNative_startDaemon -u Java_oracle_ops_mgmt_nativesystem_UnixNative_validateRawDevice -u Java_oracle_ops_mgmt_nativesystem_UnixNative_getOracleGroup -u Java_oracle_ops_mgmt_nativesystem_UnixNative_getEffectiveGroup -h libsrvm10.so -shared /opt/oracle/product/10.2.0/db_1/srvm/lib/libsrvm10.a -L/opt/oracle/product/10.2.0/db_
INFO: 1/lib/ -L/opt/oracle/product/10.2.0/db_1/lib/ -L/opt/oracle/product/10.2.0/db_1/srvm/lib/ /opt/oracle/product/10.2.0/db_1/rdbms/lib/config.o -ldl -lm -lpthread -lnsl -lirc -Wl,-rpath,/opt/oracle/product/10.2.0/db_1/lib -lm -ldl -lm -lpthread -lnsl -lirc -lm -lm -L/opt/oracle/product/10.2.0/db_1/lib
INFO: gcc:
INFO: unrecognized option `-h'
INFO: /usr/bin/ld: /opt/oracle/product/10.2.0/db_1/lib//libirc.a(fast_memcpy.o): relocation R_X86_64_PC32 against `_memcpy_mem_ops_method' can not be used when
making a shared object; recompile with -fPIC
/usr/bin/ld: final link failed: Bad value
INFO: collect2: ld returned 1 exit status
INFO: mv -f /opt/oracle/product/10.2.0/db_1/lib/libsrvm10.so /opt/oracle/product/10.2.0/db_1/lib/libsrvm10.so0
INFO: mv: cannot stat `/opt/oracle/product/10.2.0/db_1/lib/libsrvm10.so'
INFO: mv -f libsrvm10.so /opt/oracle/product/10.2.0/db_1/lib/libsrvm10.so
INFO: : No such file or directory
make[1]: [isrvm] Error 1 (ignored)
2. And... then the error that killed the build was running genorasdksh:
INFO: - Linking liborasdkbase
INFO: /opt/oracle/product/10.2.0/db_1/bin/genorasdksh -base
INFO: $Id: genorasdksh.sh 02-mar-2005.16:22:46 mchengjr Exp $
INFO: Generating BASE ORASDK library...
INFO: Creating /opt/oracle/product/10.2.0/db_1/lib/liborasdkbase.so.10.2
INFO: /usr/bin/ld: /opt/oracle/product/10.2.0/db_1/lib/libirc.a(fast_memcpy.o):
relocation R_X86_64_PC32 against `_memcpy_mem_ops_method' can not be used when making a shared object; recompile with -fPIC
/usr/bin/ld: final link failed: Bad value
INFO: collect2: ld returned 1 exit status
INFO: /opt/oracle/product/10.2.0/db_1/bin/genorasdksh: Failed to link liborasdkbase.so.10.2

Hi Owen,
We have experienced the exact identical errors when installing 10g R2 on the same o/s version.
We tested a bypass of that error by clicking continue on the error window and let the install 'complete'.
We then attempted to start an existing 10.1.0.4 instance and the error libkaio.so.1 not found occurred. I then ldd oracle and discovered the /usr/libaio.so.1 was not found. It turns out we downloaded and installed the libaio_64 rpm then executed relink all. The link completed successfully and we were able to start the instance then manually upgrade it to 10.2.0.1.
It's my feeling that the lib file versions (32 vs 64 bit) play a roll in th eerrors occurring during this new install.
We are opening a TAR about the install errors regarding rmem an wmem kernel parameters and the swap space requirements documented and the associated error.
This forum by the way has a faster time to discussion than Metalink does!
Regards,
Tracy Davis
Bonneville Power Administration

RAC using templates /u01 corrupt file system

Hi,
newbie to the forum - please be gentle ;o)
Trying to install RAC using virtualbox and templated. Get to the point of just before first boot interview when vnc'd into the virtual machines. But the boot fails with a corrupt /u01. ANyone had corrupt /u01 before ? How to stop it happening ? I tried to continue by using "fsck -a" but it would not allow automatic fix. So I tried manually going through each error ( but there are thousands ). Also tried taking /u01 out of fstab to get first interview. But then the installed failed after doing buildcluster.sh due to same issue ( corrupt /u01 ).
Have tried creating new VMs - always getting corrupt /u01.
Any thoughts / ideas welcome.
Thanks.

Arf,
I am new to RAC. I analyzed Alejandro's script. He is main connection is to the first instance; then through sql*plus, he gets connected to the second instance. he exits the second instance and starts with RMAN backup to the database . Therefore the backup to the database is done from the first instance.
I do not see where he setenv again to change to the second instance to run RMAN to backup the second instance. It looks to me that the backup is only done to the first instance, but not to the second instance. I may be wrong, but I do not see the second instance backup.
Kindly, I request your assistance on the steps/connection to backup the second instance. Thank you so much!! Terry

Is it possible to install OL6.2 with UEK using btrfs root file system?

Can we use btrfs for root file system with Oracle Linux?
If yes - how to install it? (OL6.2 installer doesn't offer btrfs within the available file systems).

For what it's worth, I tried the following, which worked:
host: vm022
cd /etc/yum.repos.d
rm public-yum*
wget http://public-yum.oracle.com/public-yum-ol6.repo
+Edit public-yum-ol6.repo and enable [ol6_UEK_latest]+
yum update kernel-uek
yum install btrfs-progs
The system was successfully updated to UEK2 - 2.6.39-100
Boot the system form Fedora 15 Live CD and open a terminal. Enter the following:
su - root
yum install btrfs-progs
lvscan
btrfs-convert /dev/vg_vm022/lv_root
(conversion complete)
mount /dev/vg_vm022/lv_root /mnt
Edit /mnt/etc/fstab and change the root volume filesystem from ext4 to btrfs
umount /mnt
reboot
Start from the OL6.2 DVD in rescue mode. Select continue to let if find the existing Linux system and drop into the shell
chroot /mnt/sysimage
modprobe btrfs
lsmod | grep btrfs
cd /boot
cp initramfs-2.6.39-100.5.1.el6uek.x86_64.img /root
mkinitrd -f -v /boot/initramfs-2.6.39-100.5.1.el6uek.x86_64.img 2.6.39-100.5.1.el6uek.x86_64
exit
unmount /mnt/sysimage
After another restart (it restarted twice doing some volume/label converison - didn't catch it)
mount
/dev/mapper/vg_vm022-lv_root on / type btrfs (rw)
Edited by: Dude on Mar 29, 2012 6:35 PM

IE8 Crash with native install of IE11 and using pac proxy file.

This issue seems to be specific to a windows 7 with a native install of IE11 and using a proxy pac file for configuration. From what I can gather from the logs, all the right files are getting loaded from the package.
This is happening on 32 and 64 bit machines. The IE8 was captured per VMWare specs and the IEShims.dll fix has been applied.
I have tried the 'wow64=0' setting as well as the 'AltArchitectureShortcut=0' in the package.ini file. Neither of these settings seem to help.
Any insight would be appreciated.
Lance
Updated the original message to match the correct issue.
Message was edited by: lcourson

So after much troubleshooting, I was able to find out that the file that was causing the issues is jsproxy.dll. This file changed between Windows XP (which is where IE8 was captured from) and Windows 7. There is one method missing in the XP version, InternetGetProxyInfoEx. I only ran across this issue because we are using a pac file for our proxy assignments. This seems to be a similar issue to the IEShims.dll fix from http://kb.vmware.com/kb/2038758.
This fix would be the same as the IEShims fix, copy the jsproxy.dll version from a windows 7 IE8 machine to the package and recompile.
Putting this out there in case anyone else runs across this issue.
Lance

PLEASE HELP! THIS IS URGENT! CAN'T INSTALL PRO AS IT SAYS DO NOT MEET MINIMUM SYSTEM REQUIREMENTS!

I have a Macbook 10.6.8 and have AE CS5.5 installed already but when installing Premiere Pro it says cannot meet system requirements. At first I started to download and everything seemed ok until I put 2 nd disk in and then it just crashed. I cannot play Uk Region DVD's on my laptop is that to do with it, I hope not. Why is this happening? This is extremely urgent as this is for a job and I'll lose it if I can't sort it.
PLEASE HELP

do you meet or exceed these specs:
Multicore Intel processor with 64-bit support
Mac OS X v10.6.8, v10.7, or v10.8**
4GB of RAM (8GB recommended)
4GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
Additional disk space required for preview files and other working files (10GB recommended)
1280x900 display
7200 RPM hard drive (multiple fast disk drives, preferably RAID 0 configured, recommended)
OpenGL 2.0–capable system
DVD-ROM drive compatible with dual-layer DVDs (SuperDrive for burning DVDs; Blu-ray burner for creating Blu-ray Disc media)
QuickTime 7.6.6 software required for QuickTime features
Optional: Adobe-certified GPU card for GPU-accelerated performance
This software will not operate without activation. Broadband Internet connection and registration are required for software activation, validation of subscriptions, and access to online services.* Phone activation is not available.

Flash install fails hdutil: attach failed no mountable file systems

I've tried all suggested trouble tips to install the latest Flash 11. Dowload completes but install fails with:
hdutil: attach failed - no mountable file systems.
I have unistalled all prior flash files. Flash works OK in Chrome (it is built in and does not require a plug-in) but can't install using either Safari or Firefox. Same result in each case.

Adobe Flash Player Troubleshooting
Adobe Flash Player Troubleshooting (2)

What "mountable file system" is xcode3.2.6 looking for on install?

I just updated my Mac Mini to OS X 10.6.8 after dowloading the xcode3.2.6+iOS DMG file. But now I am a little puzzled by the error message I get when I double-click to install: it fails with the message, "no mountable file systems".
I can find no special instructions in the readme file (downloaded separately), and I thought that it was only in the distant past that Apple required installs to be done from a separate filesystem. Hence the question: what "mountable file system" is it looking for? It is already ON a mounted file system.
Now speaking of that readme: when it starts talking about install from download (p4-5), it assumes the download yielded a .mpkg file. But I did not get this: I got a .dmg. Are they simply assuming the user knows the trick to get from DMG to MPKG?

You can check the disk image using the 'hdiutil' tool at the command line (Terminal.app):
hdiutil verify /Users/JD/Downloads/xcode_4.2_and_ios_5_sdk_for_snow_leopard.dmg
... (specify the path of your disk image that you downloaded). There should be several lines of output, and if the image is good, the last line should look something like this:
hdiutil: verify: checksum of "/Users/JD/Downloads/xcode_4.2_and_ios_5_sdk_for_snow_leopard.dmg" is VALID
... if it's not good, you'll see a variety of complaints and issues spit out.
The files are served and downloaded via the HTTP protocol which doesn't provide any particular validation on data transfer outside of what little negotiation happens at the TCP protocol layer. There's no Firefox plugin that can fix that, nor option to wget.
If it took 11 hours to download, that's < 44kbps. You might want to choose something other than a dial-up connection to download such large files. It wouldn't be at all surprising for there to be a minor error over such a connection.

10gR2 install on RHEL4, Intelx86, using 10gR2 on GFS file system.

Similar Messages

Maybe you are looking for