11.1.2.3.500.17 - Delete Cell Detail

Hi community,
Is it possible to delete the message detail that is shown when position on it?
Thanks in advance!

It is a tooltip, I don't think there is a way to remove it. (unless you break it)
Regards
Celvin Kattookaran

Similar Messages

How do i delete cells in numbers

How do I delete cells in Numbers

Delete as in "delete the contents of"? Select the cell and hit Delete
Delete as in it goes away and other cells shift into its place? Not a feature of Numbers. You can delete an entire column or row but not a single cell. You can select surrounding cells and move them up or over one cell, thereby overwriting the cell to be "deleted".

Delete bank details for a BP in CRM 5.0, it doesn't get deleted from R/3

Hi,
When I delete bank details for a business partner in CRM, it doesn't get deleted form R/3.
Although I can see a green bdoc with confirmed status, with no errors. Any clue?
Regards,
Kaushal

Yes, when I add a new bank detail, it gets properly reflected in R/3. The problem is only during deletion.
I think I've reached the solution - notes 1016909 and 941660.
Regards,
Kaushal

Is it possible to delete bank details in Mantain Insurance Relationships Proposal Pool?

Hello,
We are on SAPK-60614INISH (SAP healtchare Support Package 14)
is it possible to delete bank details in Mantain Insurance Relationships Proposal Pool?
In Mantain Insurance Relationships Proposal Pool, there is no button to erase bank details
It is easier for the user to delete bank details in Mantain Insurance Relationships Proposal Pool than in FD02 Change
Thanks in advance
Best Regards

To the best of my knowledge, not on an unjailbroken phone using the stock Messages app.

Moving cells independent of rows, ie delete cell and move others up.

This has to be easy but i can't figure it out. I have a document with 4 columns by 50 rows. All of the cells are independent of the rows they are in and from time to time i need to delete a cell and move the cells below it up. Its easy in excel, you just highlight the cell and it asks "move up" or "move down". I can't seem to find anything comparable in numbers. I seem to be only able to delete entire rows which would delete cells in other columns that I need. Is there a way to do this? Thanks.

r,
It's pretty easy in Numbers too, but it's not the same. Let's say you want to move all the cells below a certain cell up one row to eliminate that single cell. Select all the cells that you want to move, Edit > Mark for Move, click on the cell you want to eliminate, Edit > Move.
Jerry

Deleted cell number appears (along with the edited number) when sending a text. How do I get rid of it?

Deleted cell number appears (along with the edited number) when sending a text. How do I get rid of it?

It has nothing to do with iOS 6. It's always been that way. Given that it's been this way for so long, one assumes that Apple knows about it and has their own reasons for not changing it.
Restore the phone as new, not from back up to delete the numbers. Or, wait until the cache gets overwritten.
Best of luck.

Delete Bank Details via FD02- Lockbox Program

Good Morning SAP Gurus,
Is there a procedure or 'best practices' in deleting bank details or MICR information from all Customer in one company code?
My current client as a result of incorrect format has incorrect MICR information in Payment transactions so we decided it would be best to delete the existing MICR information under customer master. We have corrected the format with the bank and now we would like to start new.
Your help is greatly appreciated.
Regards,

Hi Brenda,
From my understanding, the bank account details are held at the general level and not the company code level, therefore even though your vendor is working in both company codes, the banking data for either company code are stored in the same place (LFA1). Hopefully that makes sense.
Now, when you are making a payment to a vendor using FB60 or MIRO, you have the option of selecting the bank account you want to pay. To do this, first you must set up the vendor, ensuring you put something into the BnkT field, on the vendor master. You can put a number in, or a country abbreviation or whatever makes sense to you. You can also put some information in there in the Reference Details field, to help you identify which bank account is which.
Now when you go to FB60 or MIRO, you should have a field called Part.Bank on the Payment tab. You can select the bank account there that you wish to pay, as long as you have set up the vendor properly. If you leave this blank, SAP will automatically allocate the payments to the default bank account, which I believe is either the first bank account or if you have left BnkT blank on the vendor master, it will default to that one. You can test this to see which bank account it defaults to.
Hope this helps,
Laura

Delete master record without deleting corresponding details

Hi all,
If we have a master-detail relation and we delete the master record, the “Implement cascade delete” flag can be selected to delete the detail records also.
Now, what if I don’t want to delete the detail records, but instead set the corresponding attribute (that points to the master) in this record to null.
For ex when deleting a department record, I need to set the “dpartmentId” field of all the corresponding employee records to null instead of deleting these records.
Is there a configuration that can be made to tell ADF automatically do this?
Thank you.

No, adf doesn't have such a mechanism. You can program it yourself by unsetting the cascade delete flag and before removing the master iterate over the child records and set the fk value to null.
Our you do this in the db using a trigger. In this case you have to refresh the child vo too.
Timo

Deleting challan details in PC00_M40_CMAP

Hi SAP Gurus,
when I am trying to delete challan details in the 3rd step of pc00_m40_cmap, it is showing the following message "first unmap all the personnel numbers mapped with the challan" and in the 4th step after selecting all the tax deduction details and all the challan details and clicking the left sided arrow in between it is not unmapping and the message is "challan mapped to tax deductions of ofcycle run".
Can anyone find solution how to delete the challan details in 3rd step ?
Thanks in advance.

Dear,
Regarding your query, the issue reported by you basically happens due to inconsistent mapping or unmapping of the employees to the Challan.
We would suggest you to kindly delete of the negative entry from the table 'T7INTE'. You also need to delete the entries from the table PCL4 as well for the corresponding challan for which the negative entry has been created. Performing the above suggested steps will remove the reported inconsistencies. After deleting the entries completely, kindly perform the Challan mapping for the employees again. Please make sure that you are not deleting the entry from the table for which Form24Q
has already been generated. The deletion process can be explained as such:
1. Execute the transaction 'se16'. Go to the tables mentioned above. You can execute the table 'T7INTE' with the TAN number. On execution, a negative entry will be displayed for a particular challan. Select that entry and delete of the entry from the table.
2. Go to table PCL4. Execute the table with relid as 'I1' to 'I2' and the TAN number in the field 'SRTFD' as 'TAN number'. On Execution, youwill find all the employees mapped to that particular TAN with the corresponding period dates. Delete of the entries for the period for which there existed a negative entry in the table 'T7INTE'.
3. After deleting the entries successfully from both the above tables, kindly performing the mapping action again. Hopefully, following the above mentioned steps will resolve the reported inconsistency and you will be able to perform the mapping successfully.
Best Regards,
Deepak..

How to identify combination of created and deleted Bank Details

Hi Experts,
I will develop a report similar to standard report RFKABL00. The requirement is to display the date, time, vendor number, vendor name, changed by, field name, company, purchasing org, new value and old value everytime a user make a change on the bank details (Bank Key and Bank Account only in XK02).
The content of field name will be either Bank Key or Bank Account with its corresponding old and new value. Using transaction XK02, I tried to replace the Bank Account of the vendor and saved the data. The created and deleted values can be found in CDPOS using: objectclas: kred, tabname: lfbk and fname: key; but it is difficult to identify the correct combination of deleted and created values. I observed that for non-key fields in LFBK table there are entries for old and new values but for key fields like bank key and bank account they have nothing.
How will we identify the correct combination of deleted and created values if there are many entries in CDPOS?

Murali,
As already specified in your previous thread. You can get the id using source code. or extend the CO and print the value of s2.
Regards,
Gyan
www.gyanoracleapps.blogspot.com
www.querenttech.com

How we can get the deleted data details in sql server?

Can we get the details like how much data was deleted?
Thanks,
Adi

Hi Adi_SQL_DBA,
According to your description, there is a way that you can recover most of the missing data with the aid of Transaction Logs and LSNs (Log Sequence Numbers). Usually, if you know when your data was deleted then the challenge to recover the deleted data is
not as difficult. But, if you do not know the date and time when the data was deleted, then we will have to find a different way of identifying the data. For more information, there are steps about recovering deleted data in SQL Server, you can review them.
http://sqlbak.com/blog/recover-deleted-data-in-sql-server/
In addition, there are steps about know who and when deleted the data.
http://raresql.com/2012/10/24/sql-server-how-to-find-who-deleted-what-records-at-what-time/
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Deleting cells in Numbers

I had finally gotten my NUMBERS table the way I wanted it when I noticed that I needed some rows between two entries. I'm a beginner, but I've learned how to add rows. Unfortunately, I've also learned how easy it is to get into trouble with NUMBERS. My table is using the "Blue Headers" style. The problem is that I somehow got one "Blue Headers" cell into a column where it doesn't belong, and it's causing problems, so I can't just ignore it. How do I remove it? I've tried highlighting it and pressing the DELETE button,but that doesn't work.

What happened is you copied a cell from a header and pasted it elsewhere into the table. It copied the contents of the cell including the formatting, just as it should. You can change the cell fill color and borders back to how they were (the procedures are covered in the User's Manual). Or you can select the table, go to the sidebar, click on the triangle to the right of "blue headers", and select "clear and apply style". This will clear all user-added formatting from the table and put it back to the template default.

Deleting book details from iPad

I wish to delete details of past books, after deleting a book you can see which ones you have downloaded before.

The best you can do is hide them:
http://support.apple.com/kb/ht4919

Blackberry Travel Deleting Trip Details

My girlfriend and I both have an unusual problem with Blackberry Travel (version 3.3.1.7) on a Z10 (OS 10.3.1.1565). Seemingly at random, the app will delete all of the travel details of a trip (though the trip will still appear in the list). If you try and re-send emails to the app, it will give an error stating that the details are already in the app (even though they've disappeared from trip details).
The only fix seems to be to manually enter the travel details, but they will shortly disappear again, leaving a blank trip with no flights, hotels, or cars. Since I travel frequently and rely on BB Travel to hold all my details, it's a frustrating problem.
Has anyone experienced something like this? I thought the recent BB Travel update for my Z10 would fix it, but it still seems to be having identical problems. For me, it happens one trip at a time, but on my girlfriend's phone it erases all of her trip details every time it happens.

Hello,
Please see my private message to you on this site. You will see a green envelope toward the top/right of the forum screens.
Cheers!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

ICloud Sync time limit - deletes ical details

Hi
I've discovered a bug of sorts. If I have an event in iCal on both the iPhone and the Mac, then shut down the mac, after a yet undeterminable time period (like over night or a good 6 hours) if I change the details on the iPhone then start the mac up it reverts to the details on the mac and deletes all the info I've put in the iPhone.
This is quite annoying for me as I'm out and about all day sometimes just with the iPhone and entering a number of job details through out the day. When I get home and start up the mac it basically deletes everything I've enetered that day.
I also think that if you're not connected to the internet all day on the mac the same thing happens and if you enter a similar event details,(namely the same time) independently then it won't recognise that it's the same event and it doesn't show up as an event on the other device.
Any ideas?
Thanks
Dave

A little more research, and I found the answer. It seems that iCloud does not like duplicate events, even on different calendars (this is actually a good thing).
The solution is to export the data, delete the calendar, then import into my archive calendar.

11.1.2.3.500.17 - Delete Cell Detail

Similar Messages

Maybe you are looking for