11.1.3 - Reporting - User Defined Member Lists

I exported a report from our production environment which is version 9.3.1 and imported into our development environment which is version 11.1.3 via Workspace and the user defined member list was not imported. Is there a way to have them included when reports are exported or do they have to recreated after they are imported?
Edited by: DPA1101 on Apr 8, 2010 11:55 AM

I'm running 11.1.1.3 and just ran into some problems with user-defined lists and found out that, for reports using Essbase as the source, the lists are stored as txt files in the database directory. So exporting the reports will never include the lists. You would need to copy the files from one server to the other. There are at least 3 files. Two of them are like indexes. The third contains XML with the actual list.
We're just starting to play with user lists so I haven't figured out if the naming convention I'm seeing is consistent everywhere. In my case, I have a file named ADMDir.txt. This has a single entry that points to another file. That file contains the list names and references to the files that contains the list (in xml).
I hope this helps.
Jerry

Similar Messages

  • User-defined selection list support in HA Release 6.5

    Dear all, As in Hyperion Wired for OLAP v4.1.2 and Hyperion Analyzer Release 5.0.3, it can allow users to create user-defined selection list for a dimension under "Advanced" option of Cube Navigator, is there the same function in Hyperion Analyzer Release 6.5? If no, is there any turnaround or alternative?Thanks for your help.Regards, Zero

    Hello,
    You must have defined user command for the radio button. This is not required. Just try putting it in at selection screen. AT SELECTION-SCREEN ON RADIOBUTTON GROUP rgp1.
    the moment the user clicks the radio button it will go to this event and call the screen. Just use AT SELECTION-SCREEN.
    Regards,
    Shekhar Kulkarni

  • EIS - Fact Tables, Drill Through Reports & User Defined SQL

    I have built a model using two factables. (Virtually one table as the two are combined in the OLAP Model.) I then built my metaoutline and I have specified an ASO cube. I built the cube and the drill through reports and then tried to load the cube.
    Intially the standard SQL generated no records. I tweeked it a bit and it then loaded. However, once I tweeked the SQL I could not get any drill through reports.
    Does anyone know how the SQL for the drill through reports is populated? Does it run off the user defined SQL?

    I've figured it out. FYI to those curious.
    The SQL for the drill through reports are specified on how the model is set up. The User Defined SQL is only for the data load.

  • Custom Quiz: How to update and report user-defined variable?

    Hello,
    I am a novice Captivate 5.5 user.  Thanks to Lilibiri's blog and articles, I have managed to built a custom quiz (all with user-defined variables and advanced actions). 
    The quiz is composed of 2 questions with 4 possible answers each.  Each of the 4 answers have a different score attached to it (i.e. answer a = 4 points; answer b = 3 points; answer c = 2 points; answer d = 1 point).  I have inlcuded a "Feedback Slide" that may appear after each question.  For example, if a person chooses score d, they will get sent to a Feedback slide that basically says they are wrong.  There is a "back" button on the "Feedback" slide that can take them back to the the prior question sllide and they can change and re-submit their answer.  After they have answered both question slides, they continue to a "Results" slide.  Upon entry to the "Results" slide, using "advanced actions" my user-defined variable adds up all of the scores to get a total.  Based on this total, one of three possible text captions boxes appear, depending on their total.  And....here are my questions (I have checked and re-checked the Forum and blogs for answers - and I am so sorry if I missed them!!) 
    1) I have defined a variable that totals the points that the person received on the quiz.  I would like this variable displayed on the Results slide.  It can get it to  appear in a Text Caption Box.  BUT if a person changes a score and re-submits the score before entering the "Results" slide, the total score reflects EVERY score that the person has chosen (the scores that they originally chose and then changed are still included in the total).
    2) I want the total score a person gets on the quiz reported to the instructor.  I don't know if a user-defined variable can be reported and how to go about doing this.  We will be running our quizzes on an LMS (though we haven't chosen one yet).  I tried using a system variable (cpQuizInfoPointsscored), but I believe (after reading discussions on Forum), it will not work in my quiz if my scores are adjusted/changed.
    3) another question - would you like me to put this in a separate discussion?   I certainly can!!  There is a "Back" button on the "Results" page.  I have tried using "advanced actions" and "on success: move to last slide visited" but neither option will allow the user to move to the last slide visited.  Ideally, I would liek a person to be able to go back through the quiz, look at their answers and adjust them.
    Thanks in advance for your help!  I have learned SO much in the last few weeks from all of you!

    Hello and welcome to the forum,
    That is a lot of questions, thanks for reading my blog. The most difficult part is indeed the reporting in case, you did see perhaps that I have not yet published the blog post about reporting questions with partial scores, third part of my reporting sequence. Have two possibilities that I'm exploring: either with Javascript, or with the brandnew Master Widget that Rod is pointing to. Watch out for the blog post(s), but need some more time. So no real answer to your second question for the moment, because you cannot control the quizzing system variables with advanced actions.
    About your first question: you will have to so sort of 'reset' when re-entering the question slide, so that the total score stored in the user variable is decremented with the score attributed to the user in his previous answer. This means that you have to store this previous score in another user variable. Hope this make sense?
    I do not get the last question totally. Are you using the default Score slide? You have to allow Backwards movement in the Quiz Preferences, but for default Question slides this will not allow the user to change his answer. I thought you were using custom question slides? Do not use the default score slide in that case, but create your own score slide, so that you can add buttons and actions to your wish. Perhaps I misunderstand your question, and it would be better to explain more, eventually in another thread if it is about the default score slide, question slides.
    Lilybiri

  • How to allow user defined in list item to see item using only Designer. Approver set in list item can't see items they are to approve.

    SharePoint 2010 and Designer 2010.
    We have a list of items that users enter information into. Only the user who enters the data can see the item. It's confidential stuff. 
    One field is the name of the person who will approve this record.
    Workflow sends approver an email and sets a task to approve the item. 
    Problem is that the user set as approver cannot see the item. 
    We can't have a list of approvers - as all staff can potentially be approvers.
    We can't allow anyone other than the person who created the item and the person that is set as approver in a field to have access. 
    I am not a programmer, but a user of SharePoint Designer 2010. 
    (I did think we had this sorted by sending an email containing all the list item fields, but this task still requires permissions). 

    Hi ,
    I understand that after you grant user permission on current item ,the user still cannot approve the workflow task .This is because the user doesn't have approve permission in the Tasks list .You only grant the user permission on current item in current
    list ,so he can approve the item by clicking the Approve/Reject in the edit control block .
    Your workflow is correct ,now you need to grant the users Approve (a permission level) permission in the Tasks list settings .In this way ,the users can finish the tasks .
    Thanks
    Entan Ming
    TechNet Community Support

  • Best practice to share user defined reports?

    What is the best practice to share user defined reports among team members?
    Currently I can create a folder under the Reports/User Defined Reports system folder and any reports or subfolders under that can be exported into xml by right-clicking on the folder and selecting 'Save As'. Then sending the file over or put it on a shared point or check in to SVN, then the other team members can right click on the User Defined Reports system folder and chose "Open report..." and select the xml file.
    Is there any more elegant way?
    Is it a good idea to share the C:\Users\lgal\AppData\Roaming\SQL Developer\UserReports.xml on Windows, or ~/.sqldeveloper/UserReports.xml (on Linux) among users?
    Is there a standard way to bring this under standard SVN control in SD?

    I think the best thing would be if someone set up a config sharing site!
    It would be very easy to do on system like drupal or e107.  People could register and submit their configs to different download sections based on what sort of configs they are.  My site runs e107 so it's not hard to see how easy it would be
    It would be easy to set up - I could do it in about 30mins but I think I have done more than enough of that!  There seems no need to officialize it to any degree and burden the server even more.
    I guess user-cb could host it couldn't?  If you restrict people to posting only small config files with no icons and link to big stuff offsite it should be tiny bandwidth usage.
    That's what I would do anyway

  • User-Defined Alphanumeric field not showing in Crystal Cross-Tab Reports

    Hi  All,
    We are facing the given below issue in crystal reports :
    In Crystal Cross-tab reports User defined fields with alphanumeric datatype are not displaying where as User defined Fields created with Numeric datatype are displayed and SAP fields for eg; Item name which are AlphaNumeric datatype are showing up.Can any body help us on this?
    Regards
      Uma

    Hi Uma,
    You may check these first:
    Re: Problem after upgrding to SAP B1 8,81 PL07
    Re: Crystal not displaying  UDF
    Re: UDF not visible in crystal report
    Thanks,
    Gordon

  • USER DEFINED FIELD ERROR

    Hi,
    The following is the setup.
    1. I defined a DBAT - ORACLE CONNECTOR and was able to provision users to it.
    2. Then I defined an user defined field in OIM i.e.
    2.1 added in the User defined field list in Users form - branch
    2.2 Added the entry with proper tags in formmetadata.xml
    2.3 And also updated it in the xlWebAdmin_en_US.properties file
    3. Restarted the server.
    4. And in the DBAT provisioning process added a new task, attached a process task adapter in integration.
    4.1 in Adapter variable mapping
    Adapter return value
    Map to - Process Data
    Qualifier - DEFAULT_BRANCH ( I think target attribute name)
    4.2 input value
    Map to - user definition
    qualifier - branch
    5. Added the USR_UDF_BRANCH CODE , Update DEFAULT_BRANCH to the the lookup usr process triggers.
    When an end user modifies from the account profile, it only reflects in the process form and not in the target table
    It gives the following error and also an error for email notification which i have not configured. it is using OOTB user profile edit process.
    ition xml of the connector 'DBPCAT'
    16:10:23,609 ERROR [REQUESTS] Class/Method: tcEmailNotificationUtil/sendEmail encounter some problems: {1}
    java.lang.NullPointerException
    at java.util.Hashtable.put(Hashtable.java:394)
    at com.thortech.xl.dataobj.util.tcEmailNotificationUtil.sendEmail(Unknown Source)
    at com.thortech.xl.dataobj.util.tcEmailNotificationUtil.sendEmailNotification(Unknown Source)
    at com.thortech.xl.ejb.beansimpl.tcRequestOperationsBean.createProfileModifyRequest(Unknown Source)
    at com.thortech.xl.ejb.beans.tcRequestOperationsSession.createProfileModifyRequest(Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
    at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionContainer.java:237)
    at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionInterceptor.java:158)
    at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstanceInterceptor.java:169)
    at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
    at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
    at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:350)
    at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:181)
    at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)
    at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
    at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor.java:138)
    at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)
    at org.jboss.ejb.Container.invoke(Container.java:960)
    at sun.reflect.GeneratedMethodAccessor127.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155)
    at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94)
    at org.jboss.mx.server.Invocation.invoke(Invocation.java:86)
    at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264)
    at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:659)
    at org.jboss.invocation.local.LocalInvoker$MBeanServerAction.invoke(LocalInvoker.java:169)
    at org.jboss.invocation.local.LocalInvoker.invoke(LocalInvoker.java:118)
    at org.jboss.invocation.InvokerInterceptor.invokeLocal(InvokerInterceptor.java:209)
    at org.jboss.invocation.InvokerInterceptor.invoke(InvokerInterceptor.java:195)
    at org.jboss.proxy.TransactionInterceptor.invoke(TransactionInterceptor.java:61)
    at org.jboss.proxy.SecurityInterceptor.invoke(SecurityInterceptor.java:70)
    at org.jboss.proxy.ejb.StatelessSessionInterceptor.invoke(StatelessSessionInterceptor.java:112)
    at org.jboss.proxy.ClientContainer.invoke(ClientContainer.java:100)
    at $Proxy778.createProfileModifyRequest(Unknown Source)
    at Thor.API.Operations.tcRequestOperationsClient.createProfileModifyRequest(Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
    at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source)
    at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
    at $Proxy806.createProfileModifyRequest(Unknown Source)
    at com.thortech.xl.webclient.actions.tcModifyProfileAction.modifyUser(Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
    at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(Unknown Source)
    at com.thortech.xl.webclient.actions.tcActionBase.execute(Unknown Source)
    at com.thortech.xl.webclient.actions.tcAction.execute(Unknown Source)
    at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
    at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
    at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
    at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:710)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
    at com.thortech.xl.webclient.security.SecurityFilter.doFilter(Unknown Source)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
    at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
    at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:230)
    at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
    at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:182)
    at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:84)
    at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
    at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
    at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java:157)
    at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
    at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:262)
    at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
    at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583)
    at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:446)
    at java.lang.Thread.run(Thread.java:619)
    16:10:32,078 INFO [STDOUT] Running GENERICADAPTER
    16:10:32,078 INFO [STDOUT] Target Class = com.thortech.xl.gc.runtime.GCAdapterLibrary
    16:10:33,250 ERROR [APIS]
    java.lang.NullPointerException
    at com.thortech.xl.ejb.beansimpl.GCOperationsBean.getModelFromConnectorDefinition(Unknown Source)
    at com.thortech.xl.ejb.beansimpl.GCOperationsBean.lookup(Unknown Source)
    at com.thortech.xl.ejb.beans.GCOperationsSession.lookup(Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
    at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionContainer.java:237)
    at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionInterceptor.java:158)
    at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstanceInterceptor.java:169)
    at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
    at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
    at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:350)
    at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:181)
    at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)
    at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
    at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor.java:138)
    at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)
    at org.jboss.ejb.Container.invoke(Container.java:960)
    at sun.reflect.GeneratedMethodAccessor127.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155)
    at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94)
    at org.jboss.mx.server.Invocation.invoke(Invocation.java:86)
    at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264)
    at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:659)
    at org.jboss.invocation.local.LocalInvoker$MBeanServerAction.invoke(LocalInvoker.java:169)
    at org.jboss.invocation.local.LocalInvoker.invoke(LocalInvoker.java:118)
    at org.jboss.invocation.InvokerInterceptor.invokeLocal(InvokerInterceptor.java:209)
    at org.jboss.invocation.InvokerInterceptor.invoke(InvokerInterceptor.java:195)
    at org.jboss.proxy.TransactionInterceptor.invoke(TransactionInterceptor.java:61)
    at org.jboss.proxy.SecurityInterceptor.invoke(SecurityInterceptor.java:70)
    at org.jboss.proxy.ejb.StatelessSessionInterceptor.invoke(StatelessSessionInterceptor.java:112)
    at org.jboss.proxy.ClientContainer.invoke(ClientContainer.java:100)
    at $Proxy373.lookup(Unknown Source)
    at Thor.API.Operations.GCOperationsClient.lookup(Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
    at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source)
    at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
    at $Proxy814.lookup(Unknown Source)
    at com.thortech.xl.gc.runtime.GCAdapterLibrary.executeFunctionality(Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpDBPCAT_GTC.GENERICADAPTER(adpDBPCAT_GTC.java:125)
    at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpDBPCAT_GTC.implementation(adpDBPCAT_GTC.java:70)
    at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
    at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
    at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
    at com.thortech.xl.dataobj.tcScheduleItem.eventPostUpdate(Unknown Source)
    at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
    at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
    at com.thortech.xl.dataobj.tcScheduleItem.checkChildrenIfCompleted(Unknown Source)
    at com.thortech.xl.dataobj.tcScheduleItem.checkChildren(Unknown Source)
    at com.thortech.xl.dataobj.tcScheduleItem.eventPostUpdate(Unknown Source)
    at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
    at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
    at com.thortech.xl.adapterfactory.events.tcAdpEvent.updateSchItem(Unknown Source)
    at com.thortech.xl.adapterfactory.events.tcAdpEvent.finalizeProcessAdapter(Unknown Source)
    at com.thortech.xl.adapterfactory.events.tcAdpEvent.finalizeAdapter(Unknown Source)
    at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpDBPCATPREPOPULATEADAPTER.implementation(adpDBPCATPREPOPULATEADAPTER.j
    ava:52)
    at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
    at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
    at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
    at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source)
    at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
    at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
    at com.thortech.xl.client.events.tcTriggerUserProcesses.insertMileStones(Unknown Source)
    at com.thortech.xl.client.events.tcTriggerUserProcesses.trigger(Unknown Source)
    at com.thortech.xl.client.events.tcUSRTriggerUserProcesses.implementation(Unknown Source)
    at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
    at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
    at com.thortech.xl.dataobj.tcDataObj.eventPostUpdate(Unknown Source)
    at com.thortech.xl.dataobj.tcUSR.eventPostUpdate(Unknown Source)
    at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
    at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
    at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
    at com.thortech.xl.dataobj.tcUSR.updateProfile(Unknown Source)
    at com.thortech.xl.dataobj.tcREQ.selfProfileEditUser(Unknown Source)
    at com.thortech.xl.dataobj.tcREQ.launchEntityDERActions(Unknown Source)
    at com.thortech.xl.dataobj.tcREQ.eventPostUpdate(Unknown Source)
    at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
    at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
    at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
    at com.thortech.xl.dataobj.tcREQ.checkRequestReceived(Unknown Source)
    at com.thortech.xl.dataobj.tcREQ.eventPostUpdate(Unknown Source)
    at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
    at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
    at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
    at com.thortech.xl.schedule.jms.requestapproval.InitRequestApproval.execute(Unknown Source)
    at com.thortech.xl.schedule.jms.requestapproval.InitRequestApproval.execute(Unknown Source)
    at com.thortech.xl.schedule.jms.messagehandler.MessageProcessUtil.processMessage(Unknown Source)
    at com.thortech.xl.schedule.jms.messagehandler.MessageHandlerMDB.onMessage(Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
    at org.jboss.ejb.MessageDrivenContainer$ContainerInterceptor.invoke(MessageDrivenContainer.java:495)
    at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionInterceptor.java:158)
    at org.jboss.ejb.plugins.MessageDrivenInstanceInterceptor.invoke(MessageDrivenInstanceInterceptor.java:116)
    at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
    at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
    at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:350)
    at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:181)
    at org.jboss.ejb.plugins.RunAsSecurityInterceptor.invoke(RunAsSecurityInterceptor.java:109)
    at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
    at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor.java:138)
    at org.jboss.ejb.MessageDrivenContainer.internalInvoke(MessageDrivenContainer.java:402)
    at org.jboss.ejb.Container.invoke(Container.java:960)
    at org.jboss.ejb.plugins.jms.JMSContainerInvoker.invoke(JMSContainerInvoker.java:1092)
    at org.jboss.ejb.plugins.jms.JMSContainerInvoker$MessageListenerImpl.onMessage(JMSContainerInvoker.java:1392)
    at org.jboss.jms.asf.StdServerSession.onMessage(StdServerSession.java:266)
    at org.jboss.mq.SpyMessageConsumer.sessionConsumerProcessMessage(SpyMessageConsumer.java:906)
    at org.jboss.mq.SpyMessageConsumer.addMessage(SpyMessageConsumer.java:170)
    at org.jboss.mq.SpySession.run(SpySession.java:323)
    at org.jboss.jms.asf.StdServerSession.run(StdServerSession.java:194)
    at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:761)
    at java.lang.Thread.run(Thread.java:619)
    16:10:35,203 ERROR [APIS] An exception occurred while creating the GenericConenctor Model from the Connector Definition file
    ... 126 more
    16:11:17,421 ERROR [FRAMEWORKPROVISIONING] An exception occurred while generating Generic Connector model from the connector defin
    ition xml of the connector 'DBPCAT'
    The other usecase is - when xelsysadm logs into idm console and updates the attribute on the user form, it updates the process form and the target table column also.
    Please help me...
    Thanks & Regards
    Kunal Jain

    You need to give permission to update the process form to any users who would be the source of the change. So if joe schmoe is updating the user, they need permission to update the process form for any user they update.
    -Kevin

  • UDO--user defined object

    how to use UDO--user defined object in sap b1????

    Creating UDO in SAP B1
    1. Create UDT, ( Create UDT as Document if want the code to be in auto increament form)
    2. Create UDFs for created UDT,
    3. Register Object using  "Object Registration Wizard",
                    (a) Put UDT's unique name in "UNIQUE ID" field of UDO (Image - UDO01.jpg) ,
                    (b) Do further as per requirements,
    4. After Registering the UDO, you can access it from where you have set it to access (@ UI Settings of "User - Defined Object Registration Wizard"),
    5. If you wana change the field location / change the design of the form, Open screen painter as and click on "Open User Defined Object List " (Mostly 3rd icon from Left in screen painter),
    6. Make required changes and save it by clicking "Save Form To Database" ( Mostly 2nd icon from Left in Screen Painter),
    7. Now the UDO is ready and can be used by user.

  • Member Lists defined by user in Data Grids or Data Forms

    Hi guys,
    I'd like to know if it is possible to include in either a Data Form or a Data Grid a member list created by myself.
    If it's possible, could you please tell me the steps to do so? I tried using AddMember:MemberList but it did not work.
    Thanks!
    L.

    Hi,
    We can see this option in the Member Attributes of Dimensions.
    Specifies the account name used for identifying differences in intercompany transactions. The PlugAcct
    attribute is required when the IsICP attribute for the account is selected.
    When we run an inter-company transaction the difference amount would be reflected in Plug Account.We need to write a rule to see that difference amount in the plug Account.

  • Columns tab in User Defined Report

    I've written a few user defined reports, but so far I've just filled in the SELECT command. I'm looking at the tab labeled "Columns" and trying to understand how that affects the report formatting.
    Am I right in assuming that this is equivalent to the COLUMN command in SQL*Plus? So "Name" maps to the column name in the SELECT, right? "hAlign" and "vAlign" are pretty self explanatory, and valid values for these are listed in the on-line help. But what about "Format"? What are valid values for this field? Do I use the format values from SQL*Plus, like "A30" for a 30 character wide column?
    Finally, is there a way to specify that a column is not to be displayed? I have a primary key that I don't want to display, but I do need to include in the SELECT, because the report has a Child query that needs to use this as a bind variable for a foreign key.

    <p>
    I've found part of the answer to my own question:
    </p>
    <p>
    Formats for the "format" field in the Columns tab are the formats used in the java.text.MessageFormat class. For example, you can use:
    </p>
    {0,date,yyyyMMdd hh:mm:ss}<p>
    The zero means the first argument; it will always be zero because we are only formatting one column. The second part tells what kind of formats to use, date or number. There is also a "choice" format type, which is related to number - works sort of like the DECODE function. The third part is the format itself, which can be one of several default formats like "currency", "percent" and "integer" for numbers, or "short", "medium", "long" or "full" for dates. I used an explicit format.
    </p>
    <p>
    I still don't have an answer to the second part of my question: How do I include a column in my query to be used as a bind variable in a child query, but exclude it from the report?
    </p>

  • Standard report for User defined feild in order operation

    Hi all,
    do we have any standard report? for User defined field in order operation. actually we have User defined field in task list and same could be reflected in order operation. so i am using those user defied field to record extra info in maintenance order.  i am wondering how to get the reports . do we have any standard reports?
    thanks
    Amit kushwaha

    Dear Amit
    I have utilised 3 user fields & activated order enhancement tab. I could find these three fields in report IW37N & IW49N. I m using ECC 6.0 EHP4. Try to set the layout & look for  fields - user field for quantity in the layout. For this please maintain some data in these user fields of some orders and then check for those orders in t code- IW37N & IW49n.
    Shakti

  • FR - User defined list not editable

    Dear Techies,
    We are having an issue off-late with respect to editing the User defined list that we created within Financial reports. When we open the FR Studio we are not able to see the list and not able to add new items to the existing user defined list. The creation of new user defined list is also not working.
    I was wondering there should be some place where this user defined table is being stored like kind of tables in some database (not sure some repository) within Hyperion servers. I searched in all places and no luck.
    Could you please tell me where the User defined list created within FR is getting stored, so I can go and in add new items?
    Thanks

    Only Admins can create and edit these, so you'll need admin permissions.
    FYI the lists, named ADMxxx.txt, can be found on the server (11.1.x):
    \Hyperion\products\Essbase\EssbaseServer\app\<app_name>\<db_name>
    although its unsupported to directly edit ;-)

  • User defined fields in task list

    What is the significance of adding user defined fields in task list operation?

    Dear Maniaba
    We have used user fields in task list to capture quantity in terms of nos & its weight for each operation. This we used as a work around to capture the repair jobs quantity & tonnage. While mapping repair of a particular machine with out any reference to material(that is we have not created them as serialised material as in the case of refurbishment) we have created task list for its repair and user wanted to capture the quantity of repair (say how many & also its weight) so we have maintained the tonnage per 1 no in these fields. later when order is being created user selects the task list & changes the quantity field then we have developed report where we calculate the total tonnage of that job & also no of items repaired.
    Regards
    S P Behera

  • Passing user defined parameters in oracle reports thru command line

    Hi All
    We are currently using Reports 6i with Oracle 10g 10.2.0.4.0
    I would like to know that is it possible to pass user defined parameters values while calling report from command line.
    For Example: I am using following coding to call report from command line.
    for /f "tokens=1-3 delims=/ " %%a in ('date /t mm/dd/yyyy -1') do (
    set mm=%%b
    set dd=%%a
    set yyyy=%%c)
    rwrun60 report=c:\reports\banks.rdf userid=express/test@test_rs2 destype=FILE desname=c:\reports\banks%dd%%mm%%yyyy%.pdf desformat=PDF BACKGROUND=NO BATCH=YES
    The report contains some user defined parameter which is using in where condition of reqport query.
    Select * from banks
    where id = :Bank_ID
    Now I want to Pass value for :Bank_Id from command line (like we pass parameter list while calling report with run_product), how it is possible?
    Thanks
    Hassan

    Hi guys
    Fortunately I am able to perform the required task as I just added the report parameter field as follows:
    rwrun60 report=c:\reports\banks.rdf userid=express/test@test_rs2 destype=FILE desname=c:\reports\banks%dd%%mm%%yyyy%%h%%mi%%ss%%ts%.pdf desformat=PDF BACKGROUND=NO BATCH=YES ERRFILE=c:\reports\error.log LOGFILE=c:\reports\joblog.log bank_id='MCB'
    bank_id is the report parameter using in where clause.
    Regards,
    Hassan

Maybe you are looking for