111 Failed to connect to SBOCommon Login - DI server

Hi,
I have developed a website that uses DI Server. I am able to successfully execute the B1 logic in my development machine. After hosting it on a server, i am getting "111 Failed to connect to SBOCommon Login" error.
Any clues?
Thanks & Regards
Amudha

You may check these threads:
Error -111 "Failed to Connect to SBOCommon" MSSQL2008
dtw error
Thanks,
Gordon

Similar Messages

  • Solution Error #: -111 Failed to Connect to SBOCommon.

    Good morning.
    We are representatives of SAP Business One
    I have a problem in the sap.
    We have a web application working properly and where a trial basis to validate the changes delivered to the customer.
    But when the application will make the communication with the sap returns me the following error.
    Unable to save the quote
    Error #: -111 Failed to Connect to SBOCommon.
    I wonder if anyone can help me in this doubt.

    Hi,
    Welcome you post on the forum.
    You mat check this first: http://forums.sdn.sap.com/search.jspa?threadID=&q=111&objID=c44&dateRange=thisyear&numResults=15&rankBy=10001
    Thanks,
    Gordon

  • -111 Failed to Connect to SBOCommon

    I am getting an occational error when I am trying to connect to one of our test databases with the DI API.
    This is what the code looks like:
      oCompany = New SAPbobsCOM.Company
            oCompany.Server = "192.168.123.76"
            oCompany.CompanyDB = "Feb19_ForAuditors"
            oCompany.UseTrusted = True
            oCompany.UserName = "maanger"
            oCompany.Password = "manager"
            '** Disconnect from DB if connection present
            If (oCompany.Connected = True) Then
                oCompany.Disconnect()
            End If
            Try
                '** Attempt connection to DB
                lRetCode = oCompany.Connect
            Catch ex As Exception
                MessageBox.Show("Error upon connecting to " & oCompany.CompanyDB & Environment.NewLine & _
                            ex.Message, "SAPbobCOM Error", MessageBoxButtons.OK, MessageBoxIcon.Error)
                Close()
            End Try
            If lRetCode <> 0 Then
                '** If there was a code other than 0 (connected) state why
                oCompany.GetLastError(lErrCode, sErrMsg)
                MessageBox.Show(sErrMsg)
            End If
    Now normally my SAP B1 setup for the application itself is set to Used Trusted.  I started off using .UseTrusted = True but it would never let me connect until it supplied .Username and .Password
    Now it seems it seems to fail more often now with both the username and password as well as being a trusted connection.
    I can use SAP fine, but when I try to run my little app it says Failed to Connect to SBOCommon
    Is there anything wrong in the above code? I would like to use the trusted connection because I don't want to have people type in their username/password each time they run this little middleware app nor do I want to store it on each machine.
    Could it possible be an issue if my program crashes and the connection to the SAP database was not closed properly and it has to wait to timeout??
    Just looking to figure this out

    Tyler,
    You state that you get the error "occasionally".  Does that mean that you do not get it all of the time?   If you do not get it all of the time, what is the difference/what has happened between the time that you do not see the error and the time that you do?  What version of Business One and patch level are you using?
    Here is a note from the SAP Notes database that may help, but it has to do with db ownership and also may not pertain to your issue ...
    https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=0000979081
    Eddy

  • SBO Error #-111: Failed to Connect to SBOCommon

    I have recently moved my databases to a SQL 2008 server on a 64bit platform. When doing so, I installed the SQL Native Client to support the client access. I can go into SAP/b1 and access everything as I did before. (Previously SQL 2005.)
    When I moved the databases, I went into the Synch Manager to change my settings. I was able to enter my SQL connection information and select my databases, but when I clicked "Try Connection", I get the error message.
    I have seen where others have found that reinstalling the Synch Manager has helped... this did not work for me.
    I have seen where others have deleted items from the TEMP folder... this did not work for me.
    I have also seen where others stated that the 64bit SQL platform is not supported with WebTools. If this is the case, then this is a problem... However, I'm begining to think that this is an issue with the support of SQL 2008.
    Can someone give me some direction to help correct this issue?
    Thanks!

    Ugh... yes that helps, thank you.
    I will update to p04 and see if that fixes my problem.
    FYI for others:
    zed E-Commerce 7.0.1 is now available for download to all zedIT Solutions partners for implementation.
    Additions:
    Express Checkout Service Tab on Business Partner detail screen Previously Purchased Item view Special Pricing view SQL 2008 compatibility New version numbering scheme Fixes and changes Credit Card data encrypted when synchronized to Business One Able to sort quotes by column heading Text label width expanded on admin homepage to display correct amount of text New instance will contain default ticket types Synch no longer fails when using stored credit card for payment method Phone number now displayed on prospect detail License request page link correct on installation using domain name and no virtual directory Initialize synch operation no longer incorrectly clears web userid UDF field when choosing UserID as the Business Partner Contacts Synch Field in the Synch Manager u2013 settings screen Correct default data populated on new instances for General mail template Single quotes and apostropheu2019s in Web Userid UDF no longer throws synch error Editing of closed service call disabled About page now shows overall product version number u201CAttentionu201D field on shipping and billing screen renamed to u201CNameu201D and moved to top Parent level category on category list page now displays links to sub categories and category description Able to sort tickets by Project and Queue Renamed u201CSupportu201D menu option in admin to u201CServiceu201D All fixes from SAP Business One E-Commerce and WebCRM(Web tools) Patch 4 merged
    Edited by: Terry Oplinger on Oct 21, 2009 7:41 PM

  • 2008-07-29 16:23:42Z - SBO Error #-111: Failed to Connect to SBOCommon

    Hey guys,
    I'm getting this error message when I try to connect to the company SAP database on another server.  When I refresh the list of databases, I can see all of the B1 databases that are on that server, but it continues to give me this error message and prevents me from connecting to the database or editing any of the other configuration tabs.
    Thanks,
    Kevin

    Hey Bryce,
    So I was using the sa user and so I created a new SQL Server user with administrative rights.  I assigned that user to the database and it seemed to have no impact on this error message I was having.
    However, I did notice that the synchmanager tools is referring the SBOCommon, not SBO-COMMON as it appears in SQL Server.  Is it possible that the synch manager is looking for SBOCommon when it should be looking for SBO-COMMON?
    Thanks,
    Kevin
    Edited by: Kevin Lee on Jul 30, 2008 3:50 PM

  • X64: ERR -111: Failed to Connect to SBOCommon

    Hi
    does anyone have experience with that error on x64 Systems?
    starting position
    1) B1 2007 A SP00 PL42 installed on a virtual machine 1 (win 2003 server)
    2) Our Application - only using DI-API - installed on machine 2 (win 2003 server) compiled for x86
    3) Our Application  - only using DI-API - installed on machine 3 (win vista ultimate 64) compiled for x86
    Running our application on machine 2 works fine. Runnig our application on machine 3 produces the error -111.
    Binaries and configurations of our application are equal on machine 2 and 3 (same deployment).
    Are there any known problems with access rights on vista, e.g. for writing into %temp% folder?
    Are there any known problems with x64 native sql client?
    I have installed a B1 client on machine 3 and it works correctly.
    Thanks
    Flo

    Hi Gordon
    thanks for the reply. During the last three days, I have read everything I could find here already and double checked. It must be another problem.
    The application is running fine in all other environments with exactly the same configuration. Even with older versions of DI-API. It is also running fine on x64 environments at our customers (Windows Server 2003 and Windows Server 2008).
    I assume, that it is a problem of my Vista environment ( e.g. there is no SM_OBS_DLL-Directory) or SQL client.
    Is there a way to trace the DI-API (I dont want to write a wrapper). I have seen, that the DI-API accesses a file called 'C:\Program Files (x86)\SAP\SAP Business One DI API\DI API 2005\DoDiLogging' and if this file exists, it writes the following messages to a file called 'C:\Program Files (x86)\SAP\SAP Business One DI API\DI API 2005\DiLogger.txt':
    28/10/2009  16:21:28  *** DI new running ... ***
    28/10/2009  16:35:42  *** DI new running ... ***
    28/10/2009  16:42:01  *** DI new running ... ***
    28/10/2009  16:42:29  *** DI new running ... ***
    28/10/2009  16:49:12  *** DI new running ... ***
    28/10/2009  17:15:49  *** DI new running ... ***
    28/10/2009  17:29:37  *** DI new running ... ***
    28/10/2009  17:31:11  *** DI new running ... ***
    28/10/2009  18:32:28  *** DI new running ... ***
    28/10/2009  18:33:57  *** DI new running ... ***
    28/10/2009  18:35:40  *** DI new running ... ***
    Unfortunately not that much of information - but eventually, there is a way to tell the DI-API to log more detailed information...
    Regards
    Max

  • ERR: SynchManager's Try Connection Button: "Failed to Connect to SBOCommon"

    When running SynchManager and testing the connection, I get the same error every time:
    SBO Error #-111: Failed to Connect to SBOCommon
    I can see both the B1 SQL Server and the Web Tools SQL Server, but it doesn't see the SBOCommon database. It's clearly there, though - why would this happen?
    Edited by: Michael Foss on Jan 22, 2008 3:48 PM - Updated Subject to make problem clearer

    Jay, I've checked on the things you mentioned and am still stuck. Here're my results:
    > 1) Is the DI-API at the same patch level as the patch level of the database?
    How would I check this? Where would I go to view the DI-API patch level and the DB patch level?
    > 2) Can you log into SBO normally?
    ...yes, but for some reason it blows up on me when I do certain things. This is not the first time this has happened, either. I have a backup of my SAP DB from over a month ago (same version as the current), and I restore it to the same SQL server under a different name. When I log in to it via SAP B1, it tells me that my password is expired and I need to change it. I change it to something else quick and it lets me in, but as soon as it finishes loading up it crashes. Upon trying to go in again, I use the new password and get in successfully. I'd prefer it if all of the manager passwords stay the same, so I go into Users and change the password back. When I Update the password dialog it goes through OK, but when I Update the user dialog it blows up again, password unchanged. This might be related to a different problem.
    > 3) Sometimes there is a copy of an old version of SBOBobsCOM2005.dll in the windows\temp folder, do a search on the computer and if you find a SBOBobscom dll in the temp directory, delete it, it will be recreated the next time the di-api is accessed.
    No such file exists anywhere in \Windows.
    > 4) Are you using SA to access the SQL server? Does the SQL user have access to all of the databases?
    Yes.
    Any further help would be fantastic. Thanks for your time.

  • Failed to Connect to SBOCommon

    Hello,
    I created a simple program to get the Session ID from the di server using the VB6.0, I supplied all the valid entries but i still can't get the session id. Here is the SBODI_Server.log response given to me.
    <?xml version="1.0"?><env:Envelope xmlns:env="http://www.w3.org/2003/05/soap-envelope"><env:Body><env:Fault><env:Code><env:Value>env:Receiver</env:Value><env:Subcode><env:Value>-111</env:Value></env:Subcode></env:Code><env:Reason><env:Text xml:lang="en">Failed to Connect to SBOCommon</env:Text></env:Reason><env:Detail><Command>Login</Command></env:Detail></env:Fault></env:Body></env:Envelope>

    Have a look at this thread
    Can't connect to Company Database w/ SOAP

  • Secure link to iTunes store failed and Connection attempt to firmware update server was unsuccessful

    Hello everyone, Im facing error with my iTunes. When I run diagnostics i can see "Secure link to iTunes store failed" - please see the image below
    Please note: as it is showing secure link to itunes is failed but still i can see iTunes store, but the above error shows when I run diagnostics.
    After that when I go through the next and I found the diagnostics report as below, within report i have marked a line with RED colored "Connection attempt to firmware update server unsuccessful". I need HELP!!!!!
    Microsoft Windows XP Professional Service Pack 3 (Build 2600)
    Gigabyte Technology Co., Ltd. G31M-ES2C
    iTunes 11.3.0.54
    QuickTime not available
    FairPlay 2.6.12
    Apple Application Support 3.0.5
    iPod Updater Library 11.1f5
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 7.1.2.6
    Apple Mobile Device Driver 1.64.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 0012B9F0069DE9C0
    Current user is an administrator.
    The current local date and time is 2014-08-05 01:48:05.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    Video Display Information
    NVIDIA GeForce 8400 GS 
    **** External Plug-ins Information ****
    No external plug-ins installed.
    The drive G: ZTE USB SCSI CD-ROM Rev 2.31 is a USB 2 device.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:    {14DCBC2B-34CB-431B-8625-1E62D7310533}
    Description:    WAN (PPP/SLIP) Interface
    IP Address:    10.128.133.101
    Subnet Mask:    255.255.255.255
    Default Gateway:    10.128.133.101
    DHCP Enabled:    No
    DHCP Server:  
    Lease Obtained:    Thu Jan 01 06:00:00 1970
    Lease Expires:    Thu Jan 01 06:00:00 1970
    DNS Servers:    8.8.8.8
            156.154.70.1
    Active Connection:    Teletalk
    Connected:    Yes
    Online:        Yes
    Using Modem:    Yes
    Using LAN:    No
    Using Proxy:    No
    Firewall Information
    Windows Firewall is on.
    iTunes is enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was unsuccessful.
    The network connection timed out.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2014-08-04 03:23:27.
    **** Device Connectivity Tests ****
    iPodService 11.3.0.54 is currently running.
    iTunesHelper 11.3.0.54 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8.  Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9.  Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA.  Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB.  Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC.  Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    **** Device Sync Tests ****
    No iPod, iPhone, or iPad found.

    Hi msahed,
    Welcome to Apple Support Communities.
    It sounds like there is an issue with your PC establishing a secure connection to the iTunes Store and the firmware update server. Try following along with the articles below, as they should resolve the issues that you described.
    iTunes: About the "A secure network connection could not be established" alert
    http://support.apple.com/kb/ts1470
    iTunes for Windows: iTunes can't contact the iPhone, iPad, or iPod software update server
    http://support.apple.com/kb/TS1814
    I hope this helps.
    -Jason

  • Webserver - "Failed to Connect to SBOCommon -111"

    hi, i have a little web-application, that connects to the SAP-Db via DIApi.
    it worked fine on the test-server, but now in the live-environment it crashes from time to time (i can't login and get the error message mentioned above).
    After a restart of the IIS it works again.
    What can it be? Has anyone had the same problem?
    best regards
    Philipp

    So,
    Sorry, i did not have so many time to think this over...
    Now it is better. I have thinked and ....
    I am would continue the authorization line, because my experience (i have written web applications for B1 and webshops) says this. Even in the development environment it is going fine, and in the go live environment could be different from tests....
    If your test environment was your PC and IIS, or VS2005, in this case the IIS was running under your account.
    Now the iis is running in the name of localsystem or network service account, so it must have to be also enabled to access license and configured for dcom security.
    This means, that Network service / Interactive / Self and SYSTEM users must have to be accessed to DI API in DCOM config of the running machine. Without this, it will not work.
    I have found my documentation:
    1.2.1 Configuring COM Security
    Follow the outlined steps below to configure COM Security to work with the Business One DI API.
    1.2.1.1 Windows 2003 Server Instructions
    (For Windows XP or Windows 2000 instructions see section 1.2.1.2)
         In Windows, click on Start > Control Panel > Administrative Tools > Component Services.
         Under Console Root click once on Component Services.
         A folder called Computers will appear on the right.  Double-click on it.
         An icon labeled My Computer will appear in the same window.  Right click on it and select Properties.
         Click on the Default COM Security tab.
         Under the section labeled Access Permissions click on Edit Default.
    u2022     Within the Group or User Name area, the following groups should appear: Network Service, Interactive, Self, and System.  Click on each of these groups to assure that Allow is selected for everything under the Permissions area.  If any of these groups are missing, follow the directions below:
    u2022     Click Add.
    u2022     Type "YOUR MACHINE NAME\network service".  (Substitute "YOUR MACHINE NAME" with the webserveru2019s name.  Do not use quotes.)
    u2022     Click Check Names.
    u2022     Click OK.
    u2022     Click Add.
    u2022     Type "interactive" (without quotes).
    u2022     Click Check Names.
    u2022     Click OK.
    u2022     Double-check to make sure Allow is checked for all permissions.  Click OK when finished.
         Select Edit Default in the Launch Permissions section.
         Under Group or User Names, the selections Network Service, Interactive, Self, and System should be available.  If any are not, follow these steps:
    u2022     Click Add.
    u2022     Type "YOUR MACHINE NAME\network service".  (Substitute "YOUR MACHINE NAME" with your the webserveru2019s name.  Do not use quotes.)
    u2022     Click Check Names.
    u2022     Click OK.
    u2022     Click Add.
    u2022     Type "interactive" (without quotes).
    u2022     Click Check Names.
    u2022     Click OK.
    u2022     Double-check to make sure Allow is checked for all permissions.  Click OK when finished.
         Select each user in the Group or User Name window and assure Allow is selected for all Permissions in the window located below them.
         Back in the My Computer Properties screen select the Default Properties tab.
         Place a check in the Enable Distributed COM on this Computer selection.
         Place a check in the Enable COM Internet Services on this Computer selection.
         Under Default Authentication Level, click the drop-down arrow and select Connect.
         Under Default Impersonation Level, click the drop-down arrow and select Identify.
         Click OK.
         Close the Component Services window and reboot your system.
    1.2.1.2 Windows XP and 2000 Installation
         In Windows, click on Start > Control Panel > Administrative Tools > Component Services.
         Under Console Root click once on Component Services.
         A folder called Computers will appear on the right.  Double-click on it.
         An icon labeled My Computer will appear in the same window.  Right click on it and select Properties.
         Click on the COM Security tab.
         Under the section labeled Access Permissions click on Edit Default.
         Within the Group or User Name area, the following groups should appear: ASP.NET, Interactive, Self, and System.  Click on each of these groups to assure that Allow is selected for everything under the Permissions area.  If any of these groups are missing, follow the directions below:
    u2022     Click Add.
    u2022     Type "YOUR MACHINE NAME\ASPNET".  (Substitute "YOUR MACHINE NAME" with the webserveru2019s name.  Do not use quotes.)
    u2022     Click Check Names.
    u2022     Click OK.
    u2022     Click Add.
    u2022     Type "interactive" (without quotes).
    u2022     Click Check Names.
    u2022     Click OK.
    u2022     Double-check to make sure Allow is checked for all permissions.  Click OK when finished.
         Select Edit Default in the Launch Permissions section.
         Under Group or User Names, the selections ASP.NET, Interactive, Self, and System should be available.  If any are not, follow these steps:
    u2022     Click Add.
    u2022     Type "YOUR MACHINE NAME\ASPNET".  (Substitute "YOUR MACHINE NAME" with the webserveru2019s name.  Do not use quotes.)
    u2022     Click Check Names.
    u2022     Click OK.
    u2022     Click Add.
    u2022     Type "interactive" (without quotes).
    u2022     Click Check Names.
    u2022     Click OK.
    u2022     Double-check to make sure Allow is checked for all permissions.  Click OK when finished.
         Select each user in the Group or User Name window and assure Allow is selected for all Permissions in the window located below them.
         Back in the My Computer Properties screen select the Default Properties tab.
         Place a check in the Enable Distributed COM on this Computer selection.
         Place a check in the Enable COM Internet Services on this Computer selection.
         Under Default Authentication Level, click the drop-down arrow and select Connect.
         Under Default Impersonation Level, click the drop-down arrow and select Identify.
         Click OK.
         Close the Component Services window and reboot your system.
    regards,
    J.

  • SCCM Task Sequence Fail to Connect Share Folder on SCCM server

    those days we have an task sequence issue- can't connect to share folder on the SCCM server
    Enviroment
    in our network, we have DHCP server, DC server, DNS server. we are trying to bring up an new server to boot from the SCCM server. we have two VLAN in our environment. VLAN 54 and VLAN 200.
    the DHCP/DC/SCCM/DNS are all running on VLAN200
    Issue
    we have those steps in this task sequence
    Installing OS
    setup windows and configuration manager
    connect to an share folder to SCCM(run some sicrpts)
    run the scripts
    install the sqlserver 
    1. when the VM running on VLAN 200, no issue on all the task list, we can access the share folder on SCCM server.
    and task sequence run ran success.
    2. but when VM running on VLAN 54, issue came. when the task sequence run into the [Setup Operation System]/[Connect to network folder]. this step can't get the share folder to sccm server.
    then the task sequcne was quit, so we logined to vm have a look.  run the ipconfig/all. no IP address get from DHCP server.
    but when we run the command  ipconfig/renew on this VM, then we can get the IP address from DHCP server.
    we have tried an alternative solution like below.
    add an step ipconfig/renew  before connect to share folder, then the task sequence can connect to share folder, but when the task run into last step- install the SQL from package.
    unfortunately, we came cross another issue.
    Failed to invoke Execution Manager to Install Software for PackageID='GDL00008' ProgramID='Install SQL 2005 Standard SP4' AdvertID='GDL2001F' hr=0x800706ba InstallSoftware 12/10/2013 11:48:17 PM 1012 (0x03F4)
    InstallSoftware failed, hr=0x800706ba InstallSoftware 12/10/2013 11:48:17 PM 1012 (0x03F4)
    Quetions
    so we suspect there may something to do with network, but the network team said there is no issue on their side. so what i can go to research, how can i fiind the root cause or how to confirm it is an network issue. do you guys have any idea on this issue?

    The error means RPC server unavailable. TS needs to invoke Execution Manager by RPC. This may be caused by the issue of RPC starting. I suggest you check the RPC service availability first. Another try is to add a restart computer step before installing
    SQL. If still no avail, add a Delay "cmd.exe /c timeout /t 900".
    Regarding the connecting network share issue, seems the network services has not been initializing or ready. Another possibility is the DHCP time out. Check the Event log and this may give you some clues of why the network is not ready or DHCP cannot get
    IP address. Network Monitor can also be used to monitor the IP helper when the Client try to send DHCP request after reboot.
    Juke Chou
    TechNet Community Support

  • Failed to connect to the remote Admin Server on host "...." and port "7001" Please, check configuration

    Hello friends,
    I have two servers S1 and S2
    I installed on S1 Foundation, OHS, CALC on S2 I install EAS, APS, FR, however during the EAS or APS configuration. These fail to deploy in Weblogic.
    I have this message.
    Now, when do I start startWebLogic, I do not have this message but the config is failed.
    Here is the config logs. someone an idea.
    [2013-10-02T10:55:49.922+01:00] [EPMCFG] [TRACE] [EPMCFG-01020] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.hit.tool.deploy.script.wrappers.WrappedDConfigBean] Error:
    [2013-10-02T10:55:49.922+01:00] [EPMCFG] [TRACE] [EPMCFG-01020] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.hit.tool.deploy.script.wrappers.WrappedDConfigBean] Error:
    [2013-10-02T10:55:50.250+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.cis.config.WeblogicNonApiHelper] trace: EPMSystem
    [2013-10-02T10:55:50.454+01:00] [EPMCFG] [TRACE] [EPMCFG-01020] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.hit.tool.deploy.script.wrappers.WrappedDConfigBean] Error:
    [2013-10-02T10:55:50.454+01:00] [EPMCFG] [TRACE] [EPMCFG-01020] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.hit.tool.deploy.script.wrappers.WrappedDConfigBean] Error:
    [2013-10-02T10:55:50.516+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.cis.config.DeploymentApiAdapter] trace: Performing deploy...
    [2013-10-02T10:55:50.516+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.cis.config.DeploymentApiAdapter] trace: Deploying eas
    [2013-10-02T10:55:50.532+01:00] [EPMCFG] [TRACE] [EPMCFG-02013] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.hit.tool.deploy.script.DeployScriptRunner] Processing file in global D:\Soft\Oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\resources\repository\common\1-global-read-s9-configuration.js
    [2013-10-02T10:55:50.704+01:00] [EPMCFG] [TRACE] [EPMCFG-01919] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.hit.tool.deploy.script.ProductDeployScriptRunner] Processing file: D:\Soft\Oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\resources\repository\common\weblogic\2-import-functions.js
    [2013-10-02T10:55:50.735+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.hit.tool.deploy.utils.UIPortUtil] trace: Calculating next free index based on the domain data...
    [2013-10-02T10:55:50.735+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.hit.tool.deploy.utils.UIPortUtil] trace: Domain contains server EssbaseAdminServices0 based on the prefix EssbaseAdminServices, index 0 is busy
    [2013-10-02T10:55:50.735+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.hit.tool.deploy.utils.UIPortUtil] trace: Domain contains server EssbaseAdminServices1 based on the prefix EssbaseAdminServices, index 1 is busy
    [2013-10-02T10:55:50.735+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.hit.tool.deploy.utils.UIPortUtil] trace: The server is NOT exist, the index is 2
    [2013-10-02T10:55:50.751+01:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01001] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.hit.tool.deploy.script.ProductDeployScriptRunner] trace: 2-import-functions.js: Deployment server index: EssbaseAdminServices2
    [2013-10-02T10:55:50.751+01:00] [EPMCFG] [TRACE] [EPMCFG-02013] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.hit.tool.deploy.script.DeployScriptRunner] Processing file in global D:\Soft\Oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\resources\repository\common\weblogic\3-global-epm-vars.js
    [2013-10-02T10:55:50.751+01:00] [EPMCFG] [TRACE] [EPMCFG-01919] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.hit.tool.deploy.script.ProductDeployScriptRunner] Processing file: D:\Soft\Oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\resources\repository\common\5-mark-deployment-started.js
    [2013-10-02T10:55:50.751+01:00] [EPMCFG] [TRACE] [EPMCFG-01919] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.hit.tool.deploy.script.ProductDeployScriptRunner] Processing file: D:\Soft\Oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\resources\repository\product\eas\6-init-eas-script-env.js
    [2013-10-02T10:55:50.766+01:00] [EPMCFG] [TRACE] [EPMCFG-05922] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.install.sw.SoftwareRegistry] Adding Hyperion Home entry...
    [2013-10-02T10:55:50.766+01:00] [EPMCFG] [TRACE] [EPMCFG-01919] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.hit.tool.deploy.script.ProductDeployScriptRunner] Processing file: D:\Soft\Oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\resources\repository\common\weblogic\7-common-cp-jvm-options.js
    [2013-10-02T10:55:50.813+01:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01001] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.hit.tool.deploy.script.ProductDeployScriptRunner] trace: isApplication32bitOnly flag value for EssbaseAdminServices2 : false
    [2013-10-02T10:55:50.844+01:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01001] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.hit.tool.deploy.script.ProductDeployScriptRunner] trace: isJRockit flag value: true
    [2013-10-02T10:55:50.891+01:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01001] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.hit.tool.deploy.script.ProductDeployScriptRunner] trace: Ignoring jvm option: -XX:PermSize=64m
    [2013-10-02T10:55:50.891+01:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01001] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.hit.tool.deploy.script.ProductDeployScriptRunner] trace: Ignoring jvm option: -XX:MaxPermSize=256m
    [2013-10-02T10:55:50.891+01:00] [EPMCFG] [TRACE] [EPMCFG-02013] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.hit.tool.deploy.script.DeployScriptRunner] Processing file in global D:\Soft\Oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\resources\repository\common\10-global-open-domain.js
    [2013-10-02T10:55:50.907+01:00] [EPMCFG] [TRACE] [EPMCFG-02012] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.hit.tool.deploy.J2EEDomain] Looks like WebLogic domain, initing webLogic
    [2013-10-02T10:55:51.016+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.high.WlstDomain] trace: Performing EPM and JRF maintenance
    [2013-10-02T10:55:54.626+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.WlstConsole] trace: Current promt is ''
    [2013-10-02T10:55:54.626+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace: Initialising WLST console
    [2013-10-02T10:55:54.954+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 24] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0:1] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace:
    [2013-10-02T10:55:54.954+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 24] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0:1] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace: CLASSPATH=D:\Soft\Oracle\MIDDLE~1\patch_wls1036\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\Soft\Oracle\MIDDLE~1\JROCKI~1\lib\tools.jar;D:\Soft\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;D:\Soft\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;D:\Soft\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.6.0.jar;D:\Soft\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;D:\Soft\Oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;D:\Soft\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;.;;D:\Soft\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.jrf_11.1.1/jrf-wlstman.jar;D:\Soft\Oracle\MIDDLE~1\ORACLE~1\common\wlst\lib\ADF-SH~1.JAR;D:\Soft\Oracle\MIDDLE~1\ORACLE~1\common\wlst\lib\ADFSCR~1.JAR;D:\Soft\Oracle\MIDDLE~1\ORACLE~1\common\wlst\lib\mdswlst.jar;D:\Soft\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\AUDITW~1.JAR;D:\Soft\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\IGFWLS~1.JAR;D:\Soft\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\jps-wlst.jar;D:\Soft\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\jrf-wlst.jar;D:\Soft\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OAMAP_~1.JAR;D:\Soft\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OAMAUT~1.JAR;D:\Soft\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\ossoiap.jar;D:\Soft\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OSSOIA~1.JAR;D:\Soft\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OVDWLS~1.JAR;D:\Soft\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\SSLCON~1.JAR;D:\Soft\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\wsm-wlst.jar;D:\Soft\Oracle\MIDDLE~1\utils\config\10.3\config-launch.jar;D:\Soft\Oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbynet.jar;D:\Soft\Oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbyclient.jar;D:\Soft\Oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbytools.jar;;
    [2013-10-02T10:56:00.002+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 24] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0:1] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace:
    [2013-10-02T10:56:00.002+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 24] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0:1] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace: Initializing WebLogic Scripting Tool (WLST) ...
    [2013-10-02T10:56:00.002+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 24] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0:1] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace:
    [2013-10-02T10:56:14.615+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 24] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0:1] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace: Welcome to WebLogic Server Administration Scripting Shell
    [2013-10-02T10:56:14.615+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 24] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0:1] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace:
    [2013-10-02T10:56:14.615+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 24] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0:1] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace: Type help() for help on available commands
    [2013-10-02T10:56:14.615+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 24] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0:1] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace:
    [2013-10-02T10:56:14.631+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 25] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0:2] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace: WLST is ready
    [2013-10-02T10:56:21.382+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 24] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0:1] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace: wls:/offline>readDomain(r'D:/Soft/Oracle/Middleware/user_projects/domains/EPMSystem')
    [2013-10-02T10:56:21.382+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 24] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0:1] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace:
    [2013-10-02T10:56:21.398+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.high.WlstDomain] trace: Is online: 'false'
    [2013-10-02T10:56:21.398+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 23] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace: Initialising WLST console
    [2013-10-02T10:56:21.492+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 26] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0:3] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace:
    [2013-10-02T10:56:21.492+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 26] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0:3] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace: CLASSPATH=D:\Soft\Oracle\MIDDLE~1\patch_wls1036\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\Soft\Oracle\MIDDLE~1\JROCKI~1\lib\tools.jar;D:\Soft\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;D:\Soft\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;D:\Soft\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.6.0.jar;D:\Soft\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;D:\Soft\Oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;D:\Soft\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;.;;D:\Soft\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.jrf_11.1.1/jrf-wlstman.jar;D:\Soft\Oracle\MIDDLE~1\ORACLE~1\common\wlst\lib\ADF-SH~1.JAR;D:\Soft\Oracle\MIDDLE~1\ORACLE~1\common\wlst\lib\ADFSCR~1.JAR;D:\Soft\Oracle\MIDDLE~1\ORACLE~1\common\wlst\lib\mdswlst.jar;D:\Soft\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\AUDITW~1.JAR;D:\Soft\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\IGFWLS~1.JAR;D:\Soft\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\jps-wlst.jar;D:\Soft\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\jrf-wlst.jar;D:\Soft\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OAMAP_~1.JAR;D:\Soft\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OAMAUT~1.JAR;D:\Soft\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\ossoiap.jar;D:\Soft\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OSSOIA~1.JAR;D:\Soft\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OVDWLS~1.JAR;D:\Soft\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\SSLCON~1.JAR;D:\Soft\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\wsm-wlst.jar;D:\Soft\Oracle\MIDDLE~1\utils\config\10.3\config-launch.jar;D:\Soft\Oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbynet.jar;D:\Soft\Oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbyclient.jar;D:\Soft\Oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbytools.jar;;
    [2013-10-02T10:56:22.570+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 26] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0:3] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace:
    [2013-10-02T10:56:22.570+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 26] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0:3] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace: Initializing WebLogic Scripting Tool (WLST) ...
    [2013-10-02T10:56:22.570+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 26] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0:3] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace:
    [2013-10-02T10:56:30.697+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 26] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0:3] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace: Welcome to WebLogic Server Administration Scripting Shell
    [2013-10-02T10:56:30.697+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 26] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0:3] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace:
    [2013-10-02T10:56:30.697+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 26] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0:3] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace: Type help() for help on available commands
    [2013-10-02T10:56:30.697+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 26] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0:3] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace:
    [2013-10-02T10:56:30.712+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 27] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0:4] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace: WLST is ready
    [2013-10-02T10:56:30.837+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 26] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0:3] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace: wls:/offline>connect('epm_admin', '**HIT**', 't3://CMAPPA1391.cm.par.emea.cib:7001')
    [2013-10-02T10:56:30.837+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 26] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0:3] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace: Connecting to t3://CMAPPA1391.cm.par.emea.cib:7001 with userid epm_admin ...
    [2013-10-02T10:56:34.151+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 26] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0:3] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace: Successfully connected to Admin Server 'AdminServer' that belongs to domain 'EPMSystem'.
    [2013-10-02T10:56:34.151+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 26] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0:3] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace:
    [2013-10-02T10:56:34.151+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 26] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0:3] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace: Warning: An insecure protocol was used to connect to the
    [2013-10-02T10:56:34.151+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 26] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0:3] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace: server. To ensure on-the-wire security, the SSL port or
    [2013-10-02T10:56:34.151+01:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 26] [ecid: 0000K5sa1z9D^aL5MRw0ye1IIynL000006,0:3] [SRC_CLASS: com.hyperion.hit.tool.deploy.wlst.ScriptWlstConsole] trace: Admin port should be used instead.

    Hello Santy,
    Thank you for your response.
    In fact, I'm on a distributed architecture
    Server 1: OHS as Web Server, Foundation (Shared Services, Workspaces )
    Server 2: Essbase Administration Services "EAS" Essbase Provider Services, Financial Reporting CALC Manager --> (Database and deploy to application server)
    When I configure EAS, APS etc... on server 2 (Database and deploy to application server), Weblogic is started on the server1 (by startWebLogic), but I have a "Failed" in the "deploy to server application", does not pass. But the database is "OK".
    However, I try to install on the server CALC MANAGER 1, it worked.
    So I ask myself, is that web applications can be on another server that Foundation?
    Thank you for your return

  • HP printer fails to connect properly if second NW5 server is up

    Hi,
    I have a baffling problem which sounds, I know, somewhat unlikely, but I
    have looked at it carefully and I believe my description is accurate. I am
    very much hoping that it is not as mad as it sounds and that someone can
    offer some information on what is going on.
    Our little local tree has two NW5 servers in it. I've got trad-style
    printing set up for a number of HP network printers all with JetDirect
    cards (various model numbers). The print queues are on server Dept1, in
    fact Dept2 doesn't do much anyway at the moment - fortunately, as it turns
    out. It all works beautifully, UNTIL one of the printers gets turned off.
    Then, when it is turned back on, no-one can print to it.
    At this point if I look at the JetDirect card's Novell/Netware status, it
    says "Status: NDS PRINT SERVER NAME ERROR" where I would normally see
    "Status: Ready". Everything else looks as normal, except under "attached
    server" where after "Server 1[nds]:" it has our server dept2 where I would
    expect to see dept1. I don't even understand the significance of this but
    it is something which changes when things are/are not OK so I thought I'd
    better mention it.
    The workaround for this is that I down dept2 then power cycle the printer
    with dept2 still down. Works like a charm - printing is then no problem,
    Status is "Ready", Dept1 is listed as Server 1 under "Attached Server". I
    can then restart the server dept2 and all will continue to be well, at
    least until the necxt time someone turns off a network printer! And so on ...
    Can some kind person please explain to me, preferably in simple language
    which will not confuse me (it doesn't take much), what on earth is going on
    here? Fortunately we can live with this workaround for the time being but
    it's not exactly brilliant, and one day may become impossible. Any offers
    please?
    Thanks
    Neville Young

    Make sure your Printers are net set for "Auto-Detect" for frame-type.
    I could imaging that your 2nd server has frame-types that server 1 does not and
    your Print Server is detecting those frame-types.
    The use of NDPS to service your PrintQs may help as well.
    [email protected] wrote:
    > Hi,
    >
    > I have a baffling problem which sounds, I know, somewhat unlikely, but I
    > have looked at it carefully and I believe my description is accurate. I am
    > very much hoping that it is not as mad as it sounds and that someone can
    > offer some information on what is going on.
    >
    > Our little local tree has two NW5 servers in it. I've got trad-style
    > printing set up for a number of HP network printers all with JetDirect
    > cards (various model numbers). The print queues are on server Dept1, in
    > fact Dept2 doesn't do much anyway at the moment - fortunately, as it turns
    > out. It all works beautifully, UNTIL one of the printers gets turned off.
    > Then, when it is turned back on, no-one can print to it.
    >
    > At this point if I look at the JetDirect card's Novell/Netware status, it
    > says "Status: NDS PRINT SERVER NAME ERROR" where I would normally see
    > "Status: Ready". Everything else looks as normal, except under "attached
    > server" where after "Server 1[nds]:" it has our server dept2 where I would
    > expect to see dept1. I don't even understand the significance of this but
    > it is something which changes when things are/are not OK so I thought I'd
    > better mention it.
    >
    > The workaround for this is that I down dept2 then power cycle the printer
    > with dept2 still down. Works like a charm - printing is then no problem,
    > Status is "Ready", Dept1 is listed as Server 1 under "Attached Server". I
    > can then restart the server dept2 and all will continue to be well, at
    > least until the necxt time someone turns off a network printer! And so on ...
    >
    > Can some kind person please explain to me, preferably in simple language
    > which will not confuse me (it doesn't take much), what on earth is going on
    > here? Fortunately we can live with this workaround for the time being but
    > it's not exactly brilliant, and one day may become impossible. Any offers
    > please?
    >
    > Thanks
    >
    > Neville Young
    Craig Wilson
    CNE3, 4, 5 - MCSE - CCNA
    NSC Sysop (http://support.novell.com/forums/)
    Tech Writer - http://www.ithowto.com
    (I Peter 4:10)

  • MDBs failed to connect to remote JMS server

    Hi,
              We currently have 2 clusters: one is a regular cluster (cluster1) and the other is JMS cluster (cluster2). Our JMS server and filestore are targeted to a migratable server in JMS cluster.
              In our weblogic-ejb-jar.xml, we added element <provider-url> to the <message-driven-descriptor> to allow JMS remote connection as follows:
              <weblogic-enterprise-bean>
                   <ejb-name>MyBean</ejb-name>
                   <message-driven-descriptor>
                        <destination-jndi-name>MyTopic</destination-jndi-name>
              <provider-url>t3://myhost:19009,myhost:19011</provider-url>
              <connection-factory-jndi-name>MyConnectionFactory</connection-factory-jn
              di-name>
                   </message-driven-descriptor>
              </weblogic-enterprise-bean>
              When we deployed our application, the Connection Status of MyBean showed "disconnected". I have tried different values (t3://myhost:19009;t3://myhost:19011) and
              (t3://myhost:19009) but got the same result.
              When I re-targeted the JMS server and filestore to a regular server (instead of migratable server), I was able to connect remotely. But because we want to be able to migrate our JMS server (auto and manually), I have to target it to a migratable server.
              I could not figure out why my MDBs failed to connect to a remote JMS server when it is targeted to a migratable server? Is there a restriction that we have to target to a regular server in order to connect remotely or I'm doing something wrong?
              Any help would be greatly appreciated.
              Thanks,
              Thao

    I'm using WL9.2 and my migratable server is actually up and running (is that what you mean about booted?).                    I meant checking your log files to make sure that the JMS server itself actually booted, not checking that the host WL server was up. (For example you should see INFO messages indicating that the JMS server has loaded "X" records from its persistent store).
              >>> Could you elaborate on the known problem?
              9.x MDBs have special code for enhanced handling of remote distributed destinations. I'm guessing that this code is somehow causing problems when the remote JMS server is migratable. I don't have enough information to elaborate further than that.
              >>> What else I can try?
              Beyond contacting customer support, I'm not sure.
              Tom

  • Airport fails to connect at login (only)

    Using a MacBook with OSX 10.5, I am trying to connect to a WPA2 Enterprise network. All of the settings are correct, and the certificate is set on 'always trust'.. but on startup/login, Airport fails to connect (no error message, but IP address is self-assigned). If I turn airport off and back on, it properly connects instantly, with no prompts at all.
    Does anyone know a reason why the machine would be unable to automatically connect to the network at login, but able to just fine if I manually turn the airport off and back on?

    Hmm.. in retrospect this probably isn't the right sub-forum for this question.. it should maybe go in a sub-forum for OS X 10.5 instead (it's not related to the airport basestation). Please feel free to move this, if so.

Maybe you are looking for