11g DBConsole on a 10g DB

Is it possible to install a 11g DB Console to run on top of a 10gR2 DB? There are features of the 11g console that we would like to use for some junior people here.

>
We got a 10gR2 DB on Sun Solaris (5.5) that we monitor with 10G GRID, but we want to use the 11g DB Console for this DB as it has some features that we would like to use.
So my questions are can we setup 11g Console?
The exisiting binaries will get me the 10g Console which is not what I am looking for. I only have one home. Not looking to configure GRID as we already have that.
>
If you mean using your existing 10gR2 Database as a repository, then yes indeed you can; currently supported versions are:
10.2.0.4
10.2.0.5You might want to go through MOS Note 412431.1 - Grid Control Certification Matrix
Regards,
Phiri

Similar Messages

Oracle 11g compatibility with oracle 10g and 9i?

Hi All
I have some queries on 11g compatibility.
Is oracle 11g client compatible with oracle 10g client which is already installed on desktop?
If yes any changes to be done and where?
Is oracle 11g compatible with oracle 10g/9i on the same server where 10g/9i are installed?
Regards

Thanks Justin Thats right ...
Problem elaboration is as follows
We currently have an application which requires oracle 10g(10.2.0.3) client to connect to database from user desktops. As
part of new application development the oracle 11g clients need to be installed on all the user deskotps.
The complete application software along with oracle client 11g has to be roled out on these desktop as part of
implementaion of new application besides the existing application(The application software is packaged along with oracle
10g client).
We would like to understand if there is any software provided by oracle using which we can switch between different oracle
versions while accessing the respective applications simultaneously. Also are there any known bugs/issues in running
oracle 10g client and oracle 11g client together on the same user desktops with different oracle homes?

AIA 3.0/11g installation on SOA 10g(10.1.3.4) - OAS

Is it possible to install AIA 3.0/11g in the SOA 10g (10.1.3.4) edition, if yes please point me towards any installation guides....
I understand 11g releases are more oriented towards weblogic, so i dont find the installation guides of 11g very useful.
To be more precise, I tried installing AIA 11g, onto a SOA server(10.1.3.4),the problem was in the third step where "SOA Server Details" are given, I'm not able to connect to my SOA server.
These r d values i gave
Admin Host Name:mildh0155
Admin Port:6003
Domain Name:xxx(i thot this as the instance name,if im wrong pls correct as to which name has to be entered here incase of the OAS)
Admin User:0c4jadmin
Admin Password:xxxxxxx
The "Managed Server" waits for a minute and then becomes "Cannot connect to Server"
Pls help...Thanks in advance

Hi Venkatesh,
You can't install AIA 3.0 on SOA Suite 10g since AIA 3.0 leverages on same SCA based components which can't be deployed on SOA Suite 10g.The domain name that is expected while installing AIA 3.0 is weblogic server domain name which doesn't have an equivalent in Oracle Application server and the port is the weblogic admin server port not opmn request port.
Hope this addresses your query.

Can we restore oracle 11g RMAN backups to 10g server

Hi,
I have RMAN backups (full backup)of oracle 11g database. My server was suddenly crashed due to hardware failure.
We have another Oracle 10g server. Is it possible to restore RMAN backups of 11g database to Oracle 10g server???
Thanks

I don't have 11g server ready with me. The other server running oracle 10g and I dont have rights to install oracle 11g on the 10g server. So I can not test the RESTORE/RECOVER commands.
If anyone had experience in the past, please let me know whether we can RESTORE RMAN backups of 11g database to oracle 10g server...
Thanks

JDeveloper 11g and Oracle XE 10g

Hi, We are beginner in JDev. and ADF and Oracle as well.. we are developing a PENSION software for an organization as an Internee ... we have a less time and our timelines are getting close ..Whenever We Insert into the database it overrides the previous record .. we are using this tutorial Developing Rich Web Applications With Oracle ADF http://docs.oracle.com/cd/E18941_01/tutorials/jdtut_11r2_55/jdtut_11r2_55_1.html but at the end Its run and update in JDEVELOPER MODEL TESTER but cannot update in JSF page in Web browser and cant update in XE database also
we also follow instructions in these 2 blog posts
JDeveloper 11g and Oracle XE 10g and have done the commit button and have done changing its properties
please respond earlier
REGARDS

We are using JDeveloper and Xe database ( 11g R2 ) , Oracle ADF , Xe database
how have you configured your commit button : JDeveloper 11g and Oracle XE 10g
and how are you instering a row : ->> When we insert in JDEV debug app.tester it will work fine and also make changes to XE DB as well , but when we RUN app in Browser and add a field or record it will override the previous one
Edited by: 844290 on Aug 30, 2012 10:53 PM

Database 11g Administrator or Database 10g Administrator certification?

Which certification will better to go:
Database 11g Administrator
or
Database 10g Administrator
Thanks

ORACLEXXX wrote:
Which certification will better to go:
Database 11g Administrator
or
Database 10g Administrator
Thanks11g Database Certifications will become increasingly more imortant than 10g Database Certifications.
The simple answer is 11g. However one could write a book on the reasons, and for some 10g would be a better choice. And others will say 10g. And at OCA level there is at least 80% commonality on the exam topics between 10g DBA OCA and 11g DBA OCP. If you are progressing to OCP DBA level then appropriate choice of a hands on course(s) may be a financially influencing factor.

Import oracle 11g database into oracle 10g Server -

Hi guys,
We have a oracle db running on Oracle 11g. Now, we would like to export from oracle 11g into Oracle 10g XE for important demo. Is it possible??
When i try to import into Oracle 10g XE, the following Error msg appears :
IMP-00010: Not a valid export file, header failed verification
Pls help soonest possible...
tx
Rama

A BIG thank you to both of you, Managed to import succesfully. appreciate your help.
Just for others who would be using this forum.
Steps involved
1. connect with Oracle 10g Export utility to the source db.
2. export the db from source to target server
3. create DDL & schema of the source db.... ( i used toad dba )
4. run the DDL & schema of the target db (oracle 10g) .. ( i used toad dba )
5. import the dump to target server.
6. done...
thanks.

Oracle Fusion 11g Vs Oracle Fusion 10g

Hi,
What are the major changes and how complex or simple they made it in Fusion 11g over Fusion 10g? Please share this knowledge.
Thanks.

In the form there is an existing parameter of CHAR type and this is assigned to a number variable within the, but this cannot be the error as when the radio button clicks for some data it display details and for some data this gives a above error.
Never say never! Anytime you let Oracle automatically cast data from one data type to another - you are introducing risk; not to mention that it is a poor programming habit. You should ALWAYS explicitly cast your data between types because you will get inconsistent results otherwise - Oracle has always warned agaist this!
Since you have a CHAR parameter that is being assigned to a NUMBER variable you should be using the TO_NUMBER() function to cast the CHAR to a NUMBER. For example:
DECLARE
   n_num_data   NUMBER;
BEGIN
   n_num_data := TO_NUMBER(:PARAMETER.Char_Data);
EXCEPTION
   WHEN VALUE_ERROR THEN
      --Someone passed a non-numeric CHAR
      Clear_Message;
      Message('Parameter is not NUMBER');
      Message(' ');
      RAISE Form_Trigger_Failure;
END;Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.
Edited by: CraigB on Oct 11, 2011 7:51 AM

Oracle 11g ODAC with Oracle 10g Database

Hi,
I am trying to work with SDO_GEOMETRY from .Net.
When selecting * to a DataSet exception is thrown - Unknown column type.
So, i saw that Oracle Data Provider for .NET 2.0 11.1.0.6.20 supports User Defined Types. My question is this:
If i will install only ODP 11.1.0.6.20, will my system still work with everything else from 10g version?
(It's very hard to convince bosses to transfer all DB to 11g just because of UDT, so it's not an option).
Thanks in advance,
Max

I also just discovered this thread:
Which version of ODT should I use?
That does it for me.

11g onthe top of 10g? in same system.

Hi Gurus,
I planing to install obiee 11g on the top of 10g in my laptop(*OS*:windows xp 32 bit,*DB*:oracle 11g ,with 4 GB virtual memory in VM ware,disk space 80 GB,java 1.5)
1)what are extra configuration we need to take care?
2)Is there any clash between port numbers,if Yes How to resolve them?
3)Can I use both 10g,11g at a time after installation?
4)what challenges we need to face with this(In same system 1ith both 10g, 11g)?
Please any one share your Experiences/thoughts who are implemented this successfully...
thanks in Advance...

Check these
1)what are extra configuration we need to take care?
->Make sure you have hostname in host file
2)Is there any clash between port numbers,if Yes How to resolve them?
-> NO, folders are different
3)Can I use both 10g,11g at a time after installation?
->Yes
4)what challenges we need to face with this(In same system 1ith both 10g, 11g)?
-> No issues, make sure you have Java in path

Text field highlighting Issue in oracle forms 11g after migrating from 10g

We have migrated the oracle forms from 10g to 11g.
On 10g oracle form when I click on the text item then text item value gets hilighted in blue color but after converting same form(without making any code changes) into 11g version form when I click on then text item then value is NOT hilighted.
Could please help me why it's behaving different? Are there any configuration changes required at the application server side?
Thanks

christian,
We have forms 11.1.1.2.0.
In oracle forms “text item value is highlighted When user clicks on text item” is controlled by form level property “KEEP CURSOR POSITION”.
This property is not working with JAVA SUN plug-in in forms version 11.1.1.2.0.
This issue has been fixed under Patch Set 2 (11.1.1.3.0). Please see below meta link.
https://support.oracle.com:443/CSP/ui/flash.html#tab=KBHome(page=KBHome&id=()),(page=KBNavigator&id=(bmDocDsrc=KB&bmDocType=BULLETIN&bmDocID=1099499.1&from=BOOKMARK&bmDocTitle=Fixed%20Bugs%20List%20-%20Patch%20Set%202%20(11.1.1.3.0)%20for%20Oracle%20Fusion%20Middleware%2011g&viewingMode=1143))
Thanks,
Satish N

11g database compatible with 10g ASM?

Hi all,
I have one server with Oracle 10g database and ASM installed. Now I need to install a new database on 11g version. Know you if my new 11g database can use the 10g ASM? Or I need to create a new ASM in 11g too?
Thanks in advance,
Jordi

PLease look at the following link. The 11g Database is indeed going to work with 10g asm but the features available will vary depending on the version compatibility.
http://download.oracle.com/docs/cd/B28359_01/server.111/b31107/asmdiskgrps.htm#CHDJDDFG
HTH
Aman....

Can I use Oracle 11g Developer tools with 10G and XE

Hi, I want to use Oracle 11g ODAC 11.1.0.6.21 with Oracle Developer Tools for Visual Studio with 10g and Xe . Will there be any issues. I want to do so because I am not able to see Oracle Database project in Visual Studio when I install Oracle 10 g developer tools wherein I see that in Oracle 11g developer tools. Please suggest.

No there are no issues. Just be sure to install ODT in a separate location than where XE is installed.

Discoverer 11g functional on a 10g data base?

Can we function with Discoverer 11g and a 10g data base?

Thanks Michael!
I thought so but needed confirmation for management.
I hope things are picking up for you. But it might be a while for the recession to lighten.
Disco 11g is out as you have noted. Any word on the first update to it?
Thanks,
Jerre

11g dbconsole is not working on windows 2003 sp2

Hello,
Installed 11g db on 4 nodes rac using asm. Installed went well. I cannot bring dbconsole. windows serice is not starting any node.
Any idea whay can't i start dbconsole service..?
Please help ..
Thanks
James.

Hello
here what we found.. dbconsole service in windows started now after we make somechanges in the DNS..
here what we have changed in the host file...
Our DNS entry has the following entries : (just giving you 1 machine details)
serdsos1
serdsos1p
serdsos1v
our host file has following entries
old:
198.234.79.197          serdsos1.sos.state.oh.us     serdsos1
10.12.0.70          serdsos1p.sos.state.oh.us     serdsos1p
198.234.79.201          serdsos1v.sos.state.oh.us     serdsos1v
dbconsole service windows does not start...
after i changed the host file like below...
198.234.79.197          serdsos1     serdsos1.sos.state.oh.us
10.12.0.70          serdsos1p     serdsos1p.sos.state.oh.us
198.234.79.201          serdsos1v     serdsos1v.sos.state.oh.us
dbconsole start working...
do you have any idea??
Also.. I would like to ask you do i need give GLOBAL NAME with domain name..
welcome any ideas or suggestions
thanks
james
network group doesn't have any clue on this... DO you think of anything how it working now..

11g DBConsole on a 10g DB

Similar Messages

Maybe you are looking for