11g on Oracle Ent Linux ./runInstaller Pop is not displayed...

I am having a very weird error...While installing the CRS my OUI does not show the popup where I can add 2nd node info. Just a grey screen.
I have XCLOCK running... Any help is greatly appreciated.
Thanks,
Paru

What of these method are you using?
1. export DISPLAY=localhost:10.0 or export DISPLAY=127.0.0.1:10.0
OR
2. export DISPLAY=<remote_hostname>:0.0 or export DISPLAY=<remote_IP>:0.0

Similar Messages

11g on Oracle Ent Linux ./runInstaller fails: Error: can't open display:...

X-server stuff is killing me...
As root:
[root@blackbox ~]# xclock
the xclock starts right up.
[root@blackbox ~]# su - oracle
[oracle@blackbox ~]$ /usr/bin/xclock
xclock DOES NOT start. Permissions are fine and command just sits there until Ctl-C to abort.
[oracle@blackbox ~]$ hostname
blackbox
[oracle@blackbox ~]$ echo $DISPLAY
blackbox:0.0
[oracle@blackbox ~]$./runInstaller
...some checks are done and passed
...>>>Could not execute auto check for display colors using command /usr/bin/xdpinfo. Check id the DISPLAY variable is set...
Continue? yes
Can't connect to the X11 window server using blackbox:0.0...
...OUI-10027: To enable clent users to access the X server, ...# xhost +
etc., etc.
I tried all the checks suggested in the message including setting the DISPLAY to:
DISPLAY=192.168.1.110:0.0; export DISPLAY (shell is bash)
I seems that as the oracle user I cannont connect to the Xserver? Not sure how to check other than testing w/ something like xclock.
Any assistance much appreciated.

...ok...I still don't understand what the difference is from before. But, as you suggest...
(btw, the error message ">>> Could not execute auto check..." seems erroneous to me in that I'm running the KDE desktop just fine???)
[root@blackbox ~]#
[oracle@blackbox database]$ echo $SHELL
/bin/bash
[oracle@blackbox database]$
[root@blackbox ~]# DISPLAY=:0.0
[root@blackbox ~]# export DISPLAY
[root@blackbox ~]# echo $DISPLAY
:0.0
[root@blackbox ~]# su - oracle
[oracle@blackbox ~]$ cd /tmp/database/
[oracle@blackbox database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 80 MB. Actual 13706 MB Passed
Checking swap space: must be greater than 150 MB. Actual 1791 MB Passed
Checking monitor: must be configured to display at least 256 colors
>>> Could not execute auto check for display colors using command /usr/bin/xdpyinfo. Check if the DISPLAY variable is set. Failed <<<<
Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,at which time they will be rechecked.
Continue? (y/n) [n] y
Rechecking installer requirements....
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2007-10-07_04-14-47PM. Please wait ...[oracle@blackbox database]$ Oracle Universal Installer, Version 11.1.0.6.0 Production
Copyright (C) 1999, 2007, Oracle. All rights reserved.
Can't connect to X11 window server using '192.168.1.110:0.0' as the value of the DISPLAY variable.
192.168.1.110:0.0
192.168.1.110:0.0
OUI-10025:Unable to start an interactive install session because of the following error:Can't connect to X11 window server using '192.168.1.110:0.0' as the value of the DISPLAY variable. The DISPLAY environment variable should be set to <hostname or IP address>:<screen>, where the <screen> is usually '0.0'.
OUI-10026:Depending on the Unix Shell, you can use one of the following commands as examples to set the DISPLAY environment variable:
- For csh: % setenv DISPLAY 192.168.1.128:0.0
- For sh, ksh and bash: $ DISPLAY=192.168.1.128:0.0; export DISPLAY
Use the following command to see what shell is being used:
echo $SHELL
Use the following command to view the current DISPLAY environment variable setting:
echo $DISPLAY
- Make sure that client users are authorized to connect to the X Server.
OUI-10027:To enable client users to access the X Server, open an xterm, dtterm or xconsole as the user that started the session and type the following command:
% xhost +
To test that the DISPLAY environment variable is set correctly, run a X11 based program that comes with the native operating system such as 'xclock':
% <full path to xclock... see below>
If you are not able to run xclock successfully, please refer to your PC-X Server or OS vendor for further assistance.
Typical path for 'xclock': '/usr/X11R6/bin/xclock'
--------------------------------

How to start SQL Developer for 11g in Oracle Enterpirze Linux

I have installed oracle 11g in Oracle Enterprize linux. Please tell me how to start sql developer there?

I think you have to install sql developer at first and then start it....
actually, I'm not so much clearly understood what is your question.

Oracle 10G Linux runInstaller Error in writing to directory

RDBMS Version: 10.1.0.3.0
Operating System and Version: Enterprise Red Hat Linux 4.0
Linux runInstaller Error in writing to directory
Steps :-
1. Downloaded the Install 10.1.0.3 for Linux X86
2. Followed the Instructions as per B15521-01
3. When running runInstaller got below Error
$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-2.1, redhat-3, SuSE-9, SuSE-8or UnitedLinux-1.0
Failed <<<<
Exiting Oracle Universal Installer, log for this session can be found at /tmp/OraInstall2005-06-28_01-40-22PM/installActions2005-06-28_01-40-22PM.log
4. Found Patch 4153257 after unzipping the file and running as below got another error
$ ./runInstaller -paramFile /home/oracle/p4153257
Starting Oracle Universal Installer...
No pre-requisite checks found in oraparam.ini, no system pre-requisite checks will be executed.
The Java RunTime Environment was not found at 0/bin/java. Hence, the Oracle Universal Installer cannot be run.
Please visit http://www.javasoft.com and install JRE version 1.3.1 or higher and try again.
: No such file or directory
5. Then Copied the oraparam.ini to the folder where the original oraparam.ini file was present ie /tmp/orcl/Disk1/install
6. After running the installer again got below error
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-2.1, redhat-3, SuSE-9, SuSE-8, UnitedLinux-1.0 or redhat-4
Passed
All installer requirements met.
Checking Temp space: must be greater than 80 MB. Actual 3409 MB Passed
Checking swap space: must be greater than 150 MB. Actual 2055MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 65536 Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2005-06-28_01-53-49PM. Please wait ...sh: /tmp/orcl/Disk1/install/unzip: No such file or directory
Error in writing to directory /tmp/OraInstall2005-06-28_01-53-49PM. Please ensure that this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success
7. Saw the Error that it was looking for unzip in /tmp/orcl/Disk1/install so Created a Soft link
8. Still the other Error exists ie as below. Well the DIR is created and oracle user has written files. So not sure why it says check disk space or directory is writable.
$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-2.1, redhat-3, SuSE-9, SuSE-8, UnitedLinux-1.0 or redhat-4
Passed
All installer requirements met.
Checking Temp space: must be greater than 80 MB. Actual 3409 MB Passed
Checking swap space: must be greater than 150 MB. Actual 2055MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 65536 Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2005-06-28_02-23-50PM. Please wait ...
Error in writing to directory /tmp/OraInstall2005-06-28_02-23-50PM. Please ensure that this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success
$ ls -al /tmp/OraInstall2005-06-28_02-23-50PM
total 40
drwxr-xr-x 3 oracle oinstall 4096 Jun 28 14:23 .
drwxrwxrwt 44 root root 4096 Jun 29 04:03 ..
-rwxr-xr-x 1 oracle oinstall 4036 Jun 28 14:23 command_output_27899
drwxr-xr-x 2 oracle oinstall 4096 Jun 28 14:23 images
-rwxr-xr-x 1 oracle oinstall 528 Jun 28 14:23 installActions2005-06-28_02-23-50PM.log

I am not sure what was wrong in the Initial download of the Install.
I did it again and this time it came properly and all the files in the install directory ie unzip was present and the Installer came up properly.

Oracle 11g on Oracle Unbreakable Linux

OK,
I have installed 11g on a new installation of Oracle Enterprise Linux 5. Everything seemed to go OK except the swap space was set to 2Gb and 11g wanted 3.4Gb. The documentation I found on ONT said that was fine and normal as the default install gives only 2Gb. I created a startup DB of JSI. I can connect to is using sqlplus user@JSI. However, when I try to connect using ..... $ sqlplus user/password@host:1521/JSI I get this error....
ORA-12504: TNS:listener was not given the SERVICE_NAME in CONNECT_DATA
I am also having other issue but want to look at the one at a time to see if on fixes the other.

Thanks for the help and suggestions. Here is what I get when I give the lsnrctl serv...
$ lsnrctl serv
LSNRCTL for Linux: Version 11.1.0.6.0 - Production on 16-DEC-2007 08:04:30
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
Services Summary...
Service "JSI" has 1 instance(s).
Instance "JSI", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:2452 refused:0 state:ready
LOCAL SERVER
Service "JSIXDB" has 1 instance(s).
Instance "JSI", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:972 state:ready
DISPATCHER <machine: linux1.company.local, pid: 8776>
(ADDRESS=(PROTOCOL=tcp)(HOST=linux1.company.local)(PORT=47596))
Service "JSI_XPT" has 1 instance(s).
Instance "JSI", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:2452 refused:0 state:ready
LOCAL SERVER
The command completed successfully
$ sqlplus jsicgusr@linux1:1521/JSI
SQL*Plus: Release 11.1.0.6.0 - Production on Sun Dec 16 08:06:51 2007
Copyright (c) 1982, 2007, Oracle. All rights reserved.
ERROR:
ORA-12504: TNS:listener was not given the SERVICE_NAME in CONNECT_DATA
Enter user-name:
Here are my tnsnames.ora and listener.ora
# tnsnames.ora Network Configuration File: /opt/oracle/product/11g/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
JSI =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = linux1.company.local)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = JSI)
# listener.ora Network Configuration File: /opt/oracle/product/11g/network/admin/listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = linux1.company.local)(PORT = 1521))
Message was edited by:
user610650

Oracle Ent Linux after installation

I installed OEL 5.0 and after all installation is finised and Rebooted the machine its turn off automatically and said OUT OF RANGE ... i Think is an error with the video and before intall I Typed : linux resolution=1024x768
but still getting the same error ...
thx

The out of range error usually means your monitor can not display the video modus the card has set.
In order to resolve, press CTRL+ALT and while holding press F1. That should give you a character based login.
Login as root, and go to /etc/X11 (cd /etc/X11)
Now edit xorg.conf (vi xorg.conf)
Go to: Section "Screen" and look for SubSection "Display"
If not already present, add or modify the line(s) with: Modes, and only list "1024x768" there.
Another possiblity, which also can be checked in the xorg.conf file, is the horizontal and vertical refresh rate, look for the words "HorizSync" and "Vertrefresh", and check and change the rates for your monitor (the refresh rates can be found on the internet and/or in the booklet you've gotten with your monitor)

Images inside pop-ups not displaying correctly

I am generating a CHM using RoboHelp 10. I have certain pop-ups in some topics. These pop-ups contain screen shots. After generating the CHM, when I click the pop-ups to view the screen shots, they are not displayed correctly. That is, half of the image does not appear and there are no horizontal scroll bars either to scroll. This happens for pop-ups that are appear on the left side of a topic.The images inside pop-ups that appear to the right side of a topic appear fine when clicked.

Hi Rick,
Thank you for the response. Alas, updating the DHTML effects doesn't help. In the project that am working, I have used hyperlinks that are marked to be displayed as auto-sizing pop-ups.
I also tried editing the eHlpDhtm.js file as mentioned in the thread here, https://forums.adobe.com/thread/1297423#expires_in=86399993&token_type=bearer&access_token =eyJhbGciOiJSUzI1NiIsIng1dSI6I…. But that was of no avail either.
Do you have any other insights here?
Regards,
Anamika
P.S. Am using RH 10.0.1.292.

Oracle Ent Linux 5.3 GridControl 10/rel2 installer failure Xp.so.6 error

I tried some of the sus10 work arrounds but to no avail still get error.
So... apparently there is no way to install 10G grid on OELinux 5.3 until someone comes up wit another workaround
I am attempting to get to grid control/R4 but you have to start with /R2 full install
same errors before and after export
[oracle@localhost racinst]$ export libXp_HM=/usr/X11/lib
[oracle@localhost racinst]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, redhat-4 or SuSE-9
Passed
Checking for Kernel version 2.4.21 Passed
Checking for glibc version glibc-2.3.2-95.3 Passed
Checking swap space: must be greater than 150 MB. Actual 3770 MB Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-02-14_11-30-22AM. Please wait ...[oracle@localhost racinst]$ Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2009-02-14_11-30-22AM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at sun.security.action.LoadLibraryAction.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
at sun.awt.DebugHelper.<clinit>(Unknown Source)
at java.awt.Component.<clinit>(Unknown Source)
at oracle.sysman.emgc.oneclick.OneClickWizard.getGuiDefaults(OneClickWizard.java:239)
at oracle.sysman.emgc.oneclick.OneClickWizard.<init>(OneClickWizard.java:205)
at oracle.sysman.emgc.oneclick.OneClick.<init>(OneClick.java:230)
at oracle.sysman.emgc.oneclick.OneClickInstaller.<init>(OneClickInstaller.java:116)
at oracle.sysman.emgc.oneclick.OneClickInstaller.process(OneClickInstaller.java:268)
at oracle.sysman.emgc.oneclick.OneStartup.startup(OneStartup.java:359)
at oracle.sysman.emgc.oneclick.OneArgs.main(OneArgs.java:650)
at oracle.sysman.emgc.oneclick.OneStartup.main(OneStartup.java:367)
[oracle@localhost racinst]$

Are u doing oms or agent install ? any way Install the package xorg-x11-deprecated-libs-6.8.2-1.EL.13.37.i386.rpm and then try

Oracle Ent Linux 5.3 ASM install Ok then Demon fails looking for odd lib

after installed correct libraries for 32 bit 5.e OELinux on a quad core core 2 duo I get the following error
when trying to manually load ocssd.bin deamon
this lib is not available on net and seems very rare.
root@localhost /# /app/oracle/product/11.1.0/db_1/bin/ocssd.bin
/app/oracle/product/11.1.0/db_1/bin/ocssd.bin: error while loading shared libraries: libhasgen11.so: cannot open shared object file: No such file or directory
I have already installed a 11g database on this machine then added asm packages.
oracleasm-2.6.18-128.1.1.el5-2.0.5-1.el5.i686
oracleasmlib-2.0.3-1.el5.i386
oracleasm-support-2.1.2-1.el5.i386

I haven't to install anything on my RHEL 5.3 to get ASM workng, oly on RHEL 4.x.
Just have to install package pre-reqs for Oracle RDBMS.
As RHEL is almost the same as OEL, you can trry to uninstall these manually added libraries.
These are the packages required:
binutils-2.17.50.0.6
compat-libstdc++-33-3.2.3
compat-libstdc++-33-3.2.3 (32 bit)
elfutils-libelf-0.125
elfutils-libelf-devel-0.125
gcc-4.1.1
gcc-c++-4.1.1
glibc-2.5-12
glibc-2.5-12 (32 bit)
glibc-common-2.5
glibc-devel-2.5
glibc-devel-2.5-12 (32 bit)
libaio-0.3.106
libaio-0.3.106 (32 bit)
libaio-devel-0.3.106
libgcc-4.1.1
libgcc-4.1.1 (32 bit)
libstdc++-4.1.1
libstdc++-4.1.1 (32 bit)
libstdc++-devel 4.1.1
make-3.81
sysstat-7.0.0

Oracle ENT Linux Install ??

I downloaded 64bit linux from oracle about 8cds. During the installation it ask for cd 2 and when put cd 2 getting error saying not a linux CDROM.
I validated the media disc 2 with the linux utility it came with.
Has anyone seen this issue.??

Hi,
It's seems like your CD have some problem on the file .discinfo.you can mount the cd and check on the file with other CD and there should be just only one difference that the CD's number between the content of .dicinfo on different CD.
You can re-download this ISO from oracle ULN and re-burn this CD.
Best Regards
terry

Pop up not displaying in Task Flow application?

Hi...
I have a button which displays a popup on its click event.
When i converted this application to a task flow application this stopped working.
My button code :
FacesContext facesContext = FacesContext.getCurrentInstance();
ExtendedRenderKitService service =Service.getRenderKitService(facesContext,ExtendedRenderKitService.class);
service.addScript(facesContext,"var popup = AdfPage.PAGE.findComponent('pAddPopup'); popup.show();");
where pAddPopup is pop up window's id.
Edited by: Lovin_JV_941794 on Mar 11, 2013 4:33 AM

Hi,
jdev version??
When i converted this application to a task flow application this stopped working.what does this mean? you always get a better answer once you post your question properly.
This video covers how to use a taskflow as popup : http://download.oracle.com/otn_hosted_doc/jdeveloper/11gdemos/taskflow-overview-p2/taskflow-overview-p2.html
~Abhijit

Multiple pop emails not displaying in Mac mail

I have multiple pop mail accounts set up, but I can only view one of the accounts? I can select the other pop mail inboxes, but it only displays the one inbox?

I got it sorted. I was trying to load the inbox emails through the account icon in the menu bar top right. When u click on accounts tab top left and select the account it works

SAP EXPRESS Pop-up not displaying

Hello Workflow experts,
My workflow needs to display a pop-up when it arrives in the workflow inbox. I researched the site and found references to setting the priority to 1 in the activity step. This I understood to mean that I needed to go to the task in the activity step and under the tab-strip OTHER change the priority.
However this does not workis there something that I am missing here
David.S.Dittmer

You can find Program Exits tab in step type Activity and most other step types in the Workflow Builder. Yes, you will have to insert code.
Refer the help page
http://help.sap.com/saphelp_nw2004s/helpdata/en/1a/6b023c3f6aaf08e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/fd/15fe3b0f13ca4ae10000000a11402f/frameset.htm
I have never worked with them. This ABAP OO class is an example of a program exit CL_SWH_WORKITEM_EXIT.
As a standard you can send Mails that pop up a dialog informing the user that they have got an email in their SAP Business Workplace. For this create a Send Mail step and check the Express option. I think this is not available as a standard for tasks.
Hope this helps.
Thanks,
Mark
Edited by: Mark Peterson on Feb 22, 2008 6:14 PM

Oracle JHeadstart 10.1.3.1 not display the graph

hello eveyone:
i have a question.pleasle help me! thank very much!
in 'C:\MyDemo\ViewController\public_html\WEB-INF\lib' only two adf-faces-impl and jsf-impl.not have graph. jar.so,Moves the result does not have the graphical display.

Did you get the BIGraph<itemname>.xml file generated which allows you to set the type of graph?
Steven Davelaar,
JHeadstart Team.

Oracle 11g on oracle linux 6.1

Hello everyone,
I wanted to instal oracle database 11g on oracle linux 6.1 on virtual box. so, I need some help or installation guide. Any help would be greatly appreciated.
Also, I want to take Oracle DBA 1Z0-051 11g: SQL Fundamentals exam soon. So, I need to do lot of practice before taking that exam.
Is there any free resource to study? please help me.
Thank you
Abdul

Linuxx 6 is not a certified platform for Oracle 11g - see these other threads relating to this topic. Use the search feature to find more.
Re: Unable to install oracle 11g in oracle enterprise linux 6
Re: Is Oracle 11gR2 and 10gR2 BOTH compatible with Oracle Linux 6 Update 1?
Follow the steps in the Install Guide, pay particular attention to the prereqs - http://download.oracle.com/docs/cd/E11882_01/install.112/e24321/toc.htm
HTH
Srini

11g on Oracle Ent Linux ./runInstaller Pop is not displayed...

Similar Messages

Maybe you are looking for