11g Release 2 (11.2.0.3) Patch Set 2

Hi,
11g Release 2 (11.2.0.3) Patch Set 2 is available https://support.oracle.com
on but not on edelivery.
On edilivery I see only Oracle Database 11g Release 2 (11.2.0.1.0)
Is it normal or I'm making a mistake ?
Thank you.

user522961 wrote:
Hi,
11g Release 2 (11.2.0.3) Patch Set 2 is available https://support.oracle.com
on but not on edelivery.
On edilivery I see only Oracle Database 11g Release 2 (11.2.0.1.0)
Is it normal or I'm making a mistake ?
Thank you.There is a confusion, From 11.2 patchsets are now full release. So now you can download and install 11.2.0.3 directly.
Here is download location for you:
But its not available on e Delivary.
11.2.0.3 Patchset Location For Grid Infrastructure And RDBMS. [ID 1362393.1]
Hope this help
Edited by: 909592 on Feb 24, 2012 2:42 PM

Similar Messages

  • Error while appying patch set 4 (10.1.3.4.0) to oracle home (10.1.3.1.0 )

    Hi,
    I am trying to apply patch set 10g Release 3 (10.1.3) Patch Set 4 (10.1.3.4.0) to 10g Release 3 (10.1.3.1.0) oracle home. As the pre - installation steps describes I have run the script ‘upgrade_10131_10134_oracle.sql’ for both ESB and BPEL. Also we need to delete the line <data id="java-bin" value="/myhost/jdk1.4.2/bin/java" />from the ‘ORACLE_HOME/opmn/conf/opmn.xml’ file. But when I have checked that file, the line was not present there.
    But when I am running the installer, it is showing error like
    Error
    --> Process (index=1,uid=418288051,pid=30220)
    failed to start a managed process after the maximum retry limit
    Log:
    C:\Oracle\Soa_OFMPractice\SOATESTING\opmn\logs\\HTTP_Server~1.log
    Configuration assistant "OPMN Configuration Assistant" failed.
    When I checked the log I got the error message like
    08/12/05 14:00:10 Start process
    Syntax error on line 278 of c:/oracle/soa_ofmpractice/soatesting/apache/apache/conf/httpd.conf:
    Cannot load c:/oracle/soa_ofmpractice/soatesting/apache/apache/modules/apachemoduleossl.dll into server: (127) The specified procedure could not be found:
    Does anybody know how to fix this problem?
    Thanks & Regards,
    Anju

    There is a quick fix for this
    There are 2 lines you need to comment form the c:/oracle/soa_ofmpractice/soatesting/apache/apache/conf/httpd.conf
    A comment is done with a #
    If you look in the C:\Oracle\Soa_OFMPractice\SOATESTING\opmn\logs\HTTP_Server~1.log file it will tell you.
    Find the line that has apachemoduleossl in it. When you try and restart it will fail again the C:\Oracle\Soa_OFMPractice\SOATESTING\opmn\logs\HTTP_Server~1.log should tell you what line to comment
    sorry can't be of much more help but dont have access to an environement at the moment.
    cheers
    James

  • 10.1.3.3 patch set 3 compatible with Win2003 server?

    Oracle® Application Server Patch Set Notes
    10g Release 3 (10.1.3) Patch Set 3 (10.1.3.3.0) for Linux and Microsoft Windows
    Is this compatible/certified for both Windows XP and Windows 2003 server? My dba/sysadmin wants to know this before we even install.

    Hi,
    First, yes it is certified, see [http://www.oracle.com/technology/software/products/ias/files/oracle_soa_certification_r3_10.1.3_matrix.xls] for all certification information. But i would install 10.1.3.4 right away instead of installing 10.1.3.3. It has a lot of bug fixes in it.
    Kind Regards,
    Andre

  • Current Patch Set for Oracle Database Release 11.2

    Hi
    I am upgrading oracle 10G to 11GR2 in AIX 5.3 Environment with SAP ECC6 , I have just just installled Oracle 11.2.0.1.0 according to the "Database Upgrade Guide -Upgrade to Oracle Database 11g Release 2 (11.2): UNIX". After database software installation , in upgrade manual in section 3.4.4 it says, you need to install current patch set for oracle database 11g R2 and referencing a SAP note 1431799.
    I have just read note 1431799 which says Current Patch Set for Oracle Database Release 11.2 is not generally available for SAP customers until December 2010, also I donu2019t find the note 1522330 as mentioned in 1431799.
    Please let me know how I can get current patch set to apply with Oracle 11.2.0.1.0 (Is it in SAP service market place?)
    I also want to upgrade my installation to oracle 11.2.0.2, please let me know where I get the patch set to upgrade from 11.2.0.1.0 to 11.2.0.2,
    or
    I have to live with 11.2.0.1.0 and apply SAP Bundle Patch ( SBP)

    Abu Al MAmun,
    I understand from your posts that you recently upgraded to 11.2.0.2.
    I am having the same difficulty, of finding the current patch set for 11.2. Could you please let me know how you worked around it?
    Thanks,
    Siri
    Hello Everyone,
    I did read the post on to how you have to install the current patch set for 11.2.
    But honestly, it pretty much flew over my head.
    I am trying to upgrade our SAP AIX 64 bit test system from Oracle 10.2.0.4 to 11.2.0.2.
    And so far I have downloaded all the required sw for the upgrade, except for the current patch set 11.2.
    This is what I have right now:
    1) Oracle 11.2 AIX 64 bit upgrade sw - 51038805_part 1 to 51038805_part 7 and 51039800.
    2) Database Patches -->Oracle 11.2.0.2 -->
    All they have here is
    a. Database RDMBS - SAP_112020_201012_AIX.zip and b. SAP_112020_201101_AIX.zip
    b. OPatch - OPatch_11201_Generic_v3.zip and mopatch-2_1_6.zip
    c. Database Vault - DV - >Generic - p9656644_112020_Generic.zip
    If I am not wrong, the Database RDBMS files are nothing but the SAP Bundle Patches that have to be installed after installing the currrent patch set 11.2.0.2 using MOPatch.
    But I did not find the currrent patch set 11.2.0.2.
    Could someone please explain the process to me in detail? This being my first time , I am finding it a bit hard to catch up with some of the stuff.
    Thank You!
    Siri

  • OBIEE 11g: Bugs Fixed in 11.1.1.6.5 Patch Set

    Hello, I have a question about the patches that apply.
    I have installed the product BI Publisher Enterprise 11g (11.1.1.6.0)
    I detected a bug:
    bug 13791065 - UNGROUP OF A SUBGROUP WITH AN EXPRESSION DOES NOT WORK PROPERLY
    This bug was fixed in OBIEE 11g: Bugs Fixed in 11.1.1.6.5 Patch Set
    ¿could apply this patch to version BI Publisher Enterprise? Because this patch cotent the fix bug 13791065
    I think not because,...this patch only apply in OBIEE Enterprise 11g and I have BIP Enterprise 11g
    Patch 14630670: UPDATE FOR BI PUBLISHER ENTERPRISE 11.1.1.6.X SEPTEMBER 2012 is the last patch for me?
    This latest version does not contain the bug fix 13791065.
    thank you very much

    Thanks Daniele for the reply,
    I believe the 11.1.1.4 was released but only in OTN, not for everyone (I'm not 100% sure about this...) . However I know that a certain bug (9973004) was solved in 11.1.1.4, and this bug does not appear in the 11.1.1.5 list. That could happen with many other bugs, they could be solved in 11.1.1.4 but not appear in any list.
    Thanks again!

  • Calling From Oracle Forms 11g patch set 2(11.1.1.3.0) to  Oracle Reports 1

    Hi
    While calling From Oracle Forms 11g patch set 2(11.1.1.3.0) to Oracle Reports 11g patch set 2(11.1.1.3.0) I found unable to run report error
    But its finely working in 10g. The Place of error is in find_report_object
    Is any solution to resolve this problem like any registry setting or patches to solve this problem
    Please guide me
    Regards
    Murali N S

    I was able to download it from this link:
    [http://download-llnw.oracle.com/otn/java/jdeveloper/11.1.1.3.0/jdevstudio11113install.exe]
    on the general 11g Fusion download page at:
    [http://www.oracle.com/technology/software/products/middleware/index.html]
    Although the site does appear to be having problems. I got intermittent errors of the page/server not being available.

  • Is forms 10g Patch set 3 (10.1.2.3)  released?

    Hi All,
    I checked metalink for information regarding Patch set 3 (10.1.2.3) and could see none.
    Is this released yet?
    Thanks
    Rajesh ALex

    Regarding the size:
    There are almost 1200 fixes in the code line and this means that a lot of the code is being touched by fixes, making the patch set large. Since we don't patch individual components any longer we have this situation. It would be good to have a smaller footprint but in the mean time I recommend a download manager to handle the case of an interrupted download.<br>
    I tried a download manager the other day called Free Download Manager. It worked really well and it is free as the name implies. I pulled out the network cable to simulate a break and it happily continued from where it left off when the network went down. Until Oracle does what Sun does: incorporate a download manager into the downloads this is a good solution to the problem of interrupted downloads that you have to start from the beginning with.

  • Oracle 10g release 2 patch set 3

    Oracle 10g release 2 patch set 3 is for 10.2.0.4. Can this patch be applied to Oracle enterprise 10.2.0.3? Thanks.

    Oracle 10g release 2 patch set 3 is for 10.2.0.4. Can
    this patch be applied to Oracle enterprise 10.2.0.3?
    Thanks.Always read the README to verify.
    In general a patchset can be applied to the base and any lower patchset.
    So 10.2.0.4 should, unless warned otherwise for your specific configuration, be applicable to any of 10.2.0.1, 10.2.0.2 and 10.2.0.3

  • 10g Release 2 (10.2.0.4) Patch Set 3 for Linux x86 is available

    For all those who were in need of some bug fixing, maybe it has been patched in 10g Release 2 (10.2.0.4) Patch Set 3 for Linux x86, which is now available for download.

    Hello Srini, thanks for your answer.
    I haven´t Oracle Dataguard, I have a disk replication with other supplier, for this reason, I need to know the files that will be modified, because if the patch modifies a file that I haven´t on replication, I will have problems.
    Thanks again.

  • Cpio syntax in 10g Release 1 (10.1.0.3) Patch Set 1 for AIX-Based Systems

    Oracle® Database Patch Set Notes
    10g Release 1 (10.1.0.3) Patch Set 1 for AIX-Based Systems
    Download and Extract the Installation Software
    To download and extract the patch set installation software:
    1. Download the p3761843_10103_AIX64-5L.zip patch set installation archive to a directory that is not the Oracle home directory or under the Oracle home directory.
    2. Enter the following commands to unzip and extract the installation files:
    $ unzip p3761843_10103_AIX64-5L.zip
    $ cpio –idcv p3761843_10103_AIX64-5L.cpio
    Of course cpio -i is expecting a standard input, so there a missing <
    cpio –idcv < p3761843_10103_AIX64-5L.cpio
    Best Regards
    Laurent Schneider

    Hi Laurent,
    Apologies for the delay responding to your feedback.
    The Document to which you refer does not appear to be listed on the pages my group maintains at: http://www.oracle.com/technology/documentation/index.html
    We are not actually part of the OTN group.
    Therefore, please try the Members Feedback forum instead at: Community Feedback (No Product Questions)
    Thanks and regards,
    Les

  • Patch  6867054 to 6810189 (10g Release 2 (10.2.0.4) Patch Set 3 )

    I'd like to go from 6867054 to 6810189 on Windows 32 bit machine. Can I just run the 6810189 setup.exe OR are there any intermediate patches to install.
    Opatch lsinventory is showing this:
    Interim patches (1) :
    Patch 6867054 : applied on Fri May 02 11:00:16 EDT 2008
    Created on 14 Apr 2008, 10 02 56 hrs
    Bugs fixed:
    Thanks.

    Hi.
    As I understand you want to upgrade to the patch set 3, in other words to 10.2.0.4.
    yes, you can use setup.exe for this. This patch set could be installed on any release starting from 10.2.0.1, regardless of the previous patch set, or interim patch's installed.
    I would recommend to read patch set installation instructions carefully, you can find all the information on read notes there.
    Make sure you backed up your current oracle home, oracle inventory and oracle database directories(i.e. datafiles).
    Patch sets and interim patches are cumulative, they themselves manages previously installed patch sets or interim patches. but patch bundles are specific for base patch sets.

  • 10.1.0.5 Patch Set Release Date?

    Hello,
    Does anyone know the projected release date of the 10.1.0.5 patch set for Oracle Database Server?
    I'm interested in Solaris SPARC patch set.
    Thanks,
    Vlad

    CPUJan06 states that 10.1.0.5 is supposed to be release today Jan 31, 2006.
    Though it is still not available via metalink...

  • Where can I get oracle 9i release 2(9.2.x.x) patch sets?

    Hi. everyone.
    Where can I get the patch sets for "oracle 9i release 2"?
    I looked aroud this site, but I could not find it.
    Additionally, I would like to get the document, explaining the detail
    of bugs after oracle 9i release 2 (9.2.0.1).
    Does anyone help me? Thanks in advance.
    Have a wonderful day.
    Ho.
    Message was edited by:
    user507290
    Message was edited by:
    user507290

    to forbrich
    Thanks for your reply.
    Have a wonderful dream. I think you are in dream now.
    I am at the opposite side of the Earth you live.
    Thanks again.
    Ho.
    from Japan

  • Patch set from 10g Enterprise Edition Release 10.2.0.1.0 to 10.2.0.3.0

    Hi,
    Can you please provide me the patch set to upgrade from
    Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production for Windows 32bit
    to
    Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Production for Windows 32bit
    and instruction to apply the patch.
    Thank you.
    Regards,
    Lokanath

    For this you need to have CSI number and account on https://support.oracle.com
    https://support.oracle.com/CSP/ui/flash.html#tab=PatchHomePage(page=PatchHomePage&id=()),(page=PatchSearchResultsHome&id=(search=%3CSearch%3E%0A%20%20%3CFilter%20name=%22patch_number%22%20op=%22IS%22%20value=%225337014%22%20type=%22patch_number%22/%3E%0A%20%20%3CFilter%20name=%22platform%22%20op=%22IS%22%20value=%22319,212%22%20type=%22platform%22/%3E%0A%3C/Search%3E&from=bookmark&viewItem=0&flag=search))
    Regards
    Rajesh

  • Patch set 3 - release not file - [SOLVED]

    Hi all. I have no direct access to metalink, so is there someone that can put here or give me a link to release note file of patch set 3 for Oracle Form??
    Thanks in advance,
    Fabrizio
    Message was edited by:
    fdellipriscoli

    Hi Rajesh:
    Can you please also send me a copy ([email protected])
    Thanks,
    Thomas

Maybe you are looking for

  • How can I copy my ITunes sync files for my iPhone, iPad and iPod from my now discontinued PC to my new Mac?

    I want to be able to use my Macbook Pro to sync my IOS devices with I Tunes, but I think I need the files from the PC that I was using to sync them. Or maybe not !!  Perhaps if I just connect them to the Mac, ITunes will do the rest???? Or does it ne

  • Text Data source for Classification Data

    Hi BW Gurus, Ajay Das and Kishore helped me very well on this, just last step doubt. In r/3 system I have added the char tYPE AND kyf TYPE CHARACTERISTICS to classification data now it has generated the Classification customer attribute data source 1

  • ADF-Input text

    Hi all How can I get input text value by managed bean? Thanks in advance

  • Hpe540f and moving to a bigger case and other minor questions

    ok, so the thing is, is that since I've gotten my hpe540f (or VERY similar computer in the same line), I've been slowly improving the computer by adding a better graphics card and a better PSU (550ti and a 600 watt psu if you must know) and the case

  • Flash CS5 slow and not working properly

    Dear all, I have a serious problem on my machine. Some months ago I bought Master Collection CS5 and worked fine without problem with Flash and Flex. Last week I took a virus and I need to format and re-install my pc. After that I re-installed Master