11g release 2 & 11g rel2-rac Enterprise edition video tutorials
Hi Friends,
i want the video link of 11g release 2 practice Scenarios videos
&& 11g release 2 Enterprise Manager utility(all videos demonstrating each button) videos.
&& 11g release 2 Rac grid Enterprise manager videos(all videos demonstrating each button).
Thanks.
There are many here
Free Oracle Databse 12c and 11g Tutorials for Administration and Developers SkillBuilders
Some of the more recent ones are still being edited.
John Watson
Oracle Certified Master DBA
Similar Messages
-
Oracle 11g Developer or Enterprise Edition?
Hi Guys,
Please help me on this one, its not an issue but I wanted to know which one supports for my small team.
We are 3 developers and we are going to develope one project in C#.NET and Oracle 11g. Currently the project database in Oracle 11g and pascal, just we are going to migrate the interfaces into C#.net and it uses oracle 11g database. We are not going to do any changes in Oracle database.
So my question's are
1) which version is enough my developement of this project either Oracle 11g developer or Enterprise Edition?
2) Where can i get in cheap?
Thanks,
Rajesh.d1f6d790-7017-49dd-bd62-4a31fbab607f wrote:
Hi Guys,
Please help me on this one, its not an issue but I wanted to know which one supports for my small team.
We are 3 developers and we are going to develope one project in C#.NET and Oracle 11g. Currently the project database in Oracle 11g and pascal, just we are going to migrate the interfaces into C#.net and it uses oracle 11g database. We are not going to do any changes in Oracle database.
So my question's are
1) which version is enough my developement of this project either Oracle 11g developer or Enterprise Edition?
2) Where can i get in cheap?
Thanks,
Rajesh.
1) There is no developer edition in Oracle. If you are 3 developers and will be developing on your own databases, you can buy 3 personal editions(same as enterprise edition) OR you can buy an user based enterprise edition for test environment. I believe minimum you need is 10 user based licenses. Also, if you think that you are not using any enterprise features, you can always go for user based standard edition which will be much cheaper as compare to enterprise.
2) You can find some Oracle partners who sells the licenses. Sometime they give you a good discount. I personally do not think Oracle will give you enough discount for these small number of licenses. -
Slow updations (Oracle 11g 64 bit enterprise edition on Linux RHEL)
I have created Following table for profiling updates per second in Oracle Database
Test(RecordId number,Desciption varchar2(2000) //Btree Index on record id only
Table has 10000 records only.
I did updation for every record in loop by follwing query(Stored procedure executed on same server where database exists no network is coming in picture)
update Test set description = description + 'something' where Recordid = i (loop counter)//existing description has 1000 characters
I am wondering that updation of only 10000 records was taking 100 Seconds.
I was expecting atlease 1000 records/second but it is 100 record/second
Can anyone help to correct me and tell how can we improve database updations?
Processor Dual proc dual core
Raid with reading speed 2.5Gbps
OS : Linux RHEL
Database:Oracle enterprise edition 64 bit.
sga_max_size = 1.5 GB
Any help will be highly appreciated.You are running a loop but Oracle will give you read consistency.
Oracle is probably cloning some of the datablocks as it re-reads them because
it finds that the block has been previously updated.
That sort of a loop is absolutely the wrong way to test Oracle. -
Upgrade path for Oracle XE to Oracle 10G rel2 Standard/Enterprise Edition
Good day,
We are currently have application using Oracle 10G XE. Is there a document guide available to assist migration/upgrades from Oracle 10G XE to Oracle 10G Rel2
Thank you in advance for your guidanceYou can use import/export from within the apex application control to move apex applications, or if you are just interested in moving a database (and don't use apex) you can use exp/imp.
~Jer -
Snapshot standby database in oracle 11g r2 RAC
Folks,
i am just wondering if the process is same for standalone and RAC snapshot standby database.
We have a DR test
1 / I just converted the standalone DR on 11g to snapshot standby database for users to do some testing and reverted back to physical standby after test was done. i folllowed metalink note ID 443720.1
2/ now there is anotherDR test where we have 2 node prod and 2 node DR on oracle 11g rel2 RAC, so not sure we can follow the same process that i used for 11g standalone database. If somebody have done this on RAC, would you please provide the steps ?
Thanks in advance
SQL> select * from v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
SQL> !uname -a
Linux 2.6.18-164.el5 #1 SMP Thu Sep 3 03:28:30 EDT 2009 x86_64 x86_64 x86_64 GNU/LinuxI haven't done a Snapshot Standby (RAC or non-RAC). But I see no reason why it shouldn't work with a RAC Standby either.
The command is a Database level command, not an Instance level command.
Hemant K Chitale -
Hi to all,
Our company own lisence for Oracle 11g Enterprise Edition.
The software is intalled by Infrastructure people and not by any Oracle DBA.
Now we created a database and when I queried the V$version I get the below output. I think it dosent seem to be enterprise edition for me. Can you please anyone advise me what is the edition is installed in my server.
I run oracle on Windows 2003 server. Please let me know what is the edition I am currently running, as it is not display standard, enterprise I am confused.
Oracle Database 11g Release 11.1.0.6.0 - Production
PL/SQL Release 11.1.0.6.0 - Production
CORE 11.1.0.6.0 Production
TNS for 32-bit Windows: Version 11.1.0.6.0 - Production
NLSRTL Version 11.1.0.6.0 - Production
If I need to Enterprise Edition to get installed, i need to reinstall Oracle Software with Enterprise Edition or Is by changing any parameters we can make this as enterprise edition as the installable binaries are same across for every editions right?
Please advise
Regards,
Vijayaraghavan KBut, When I tried to uninstall using Oracle Universall Installer , I see Under Oracle Home-Oracle Database 11g
I see Enterprise Edition Options 11.1.0.6.0.
What does it mean? It installed the Enterprise Edition right?
I can reinstall the oracle, but I need to know why it is showing like this.
The below one is o/p from our 10g Server. It shows Enterprise with production
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
Please clarify
Regards,
Vijayaraghavan K -
Using php to connect to Oracle Database 11g Release 2 Enterprise Edition
Greetings everyone!
Please i dont know how to connect to Oracle Database 11g Release 2 Enterprise Edition with php even though i connected with php successfully with Oracle Database 11g Express Edition with the php code below. can someone help please...
define('ORA_CON_UN', 'hr'); // User name
define('ORA_CON_PW', 'Adlibs14$'); // Password
define('ORA_CON_DB', '//localhost/XE'); // Connection identifier
// use constants defined in anyco_cn.inc
$conn = oci_pconnect(ORA_CON_UN, ORA_CON_PW, ORA_CON_DB);
if (!$conn) {
db_error(null, __FILE__, __LINE__);
Edited by: user11273096 on Jul 14, 2011 3:41 PMNote that this forum is for XE Beta, not EE.
Can you connect from some other client tool, such as sqlplus?
There's a {forum:id=178} forum that may be more suitable, if basic connectivity outside php works (i.e. issue is only php specific). -
Using php to connect to Oracle Database 11g Release 2 Enterprise Edition EE
Greetings everyone!
Please i dont know how to connect to Oracle Database 11g Release 2 Enterprise Edition with php even though i connected with php successfully with Oracle Database 11g Express Edition with the php code below. can someone help please...Note im referring to oracle EE not XE.
define('ORA_CON_UN', 'hr'); // User name
define('ORA_CON_PW', 'Adlibs14$'); // Password
define('ORA_CON_DB', '//localhost/EE'); // Connection identifier
// use constants defined in anyco_cn.inc
$conn = oci_pconnect(ORA_CON_UN, ORA_CON_PW, ORA_CON_DB);
if (!$conn) {
db_error(null, __FILE__, __LINE__);
Edited by: user11273096 on Jul 15, 2011 12:03 AMFind the hostname and service name of the database and use those values in the ORA_CON_DB constant.
Use 'lsnrctl status' on the database host to find the service name.
If you use a "tns" alias, you may need to create a tnsnames.ora file where PHP can access it.
Set the environment variable TNS_ADMIN (on Linux) to the directory containing the file.
See the section "Oracle Database Name Connection Identifiers" p 102 of the free book
http://www.oracle.com/technetwork/topics/php/underground-php-oracle-manual-098250.html -
Upgradation from 10g R2 Enterprise Edition to 11g R2 Standard Edition
Hi All,
I am going through a challange, and have some doubts on it, please have a look on it.
My DB Details are as follows.
Queried from TOAD:
Production Server Details:
SELECT * FROM V$VERSION
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Prod
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for 32-bit Windows: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
Development Server Details:
SELECT * FROM V$VERSION
BANNER
Oracle Database 10g Release 10.2.0.1.0 - Production
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
Production server is in Enterprise Edition and Development is in Standard edition. Now my organization expecting to upgrade Oracle to next Database Version i.e., 11g R2 Standard Edition in both Production & Development, cause they are using only a single application in Oracle DB.
For production, current DB is Enterprise Edition & Upgrading version is of Standard Edition. What are the consequences am I going to face while upgrading the version and edition from 10g R2 EE to 11g R2 SE.
What are the patches I need to apply for it, or need I to do new Installation and dump data using Import & Export at user level. My DB Data is mostly around 2 - 3Gigs.
Kindly let me know which is easy way and which is standard practice advised by Oracle.
Thanks in Advance.
Mohd SirajoddinEnterprise edition has lot of features than standard edition and hence we can not migrate from enterprise edition to standard edition,.
The only possibility is Export/Import or Expdp/Impdp
It is also discussed at
oracle downgrade from enterprise edition to standard edition -
Hi,
We are trying to fetch data from a weblogic server using a JMS thin client.
We have loaded our client code jar(application.jar) and the following thin client jars in oracle using loadjava.
(Version:- Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - 64bit Production).
1) wljmsclient.jar
2) wlthint3client.jar
3) wlclient.jar
some of the classes remain in invalid state after loading the jar files. we validate them manually.
When we run the client code we are getting following exception.
ORA-29532: Java call terminated by uncaught Java exception: java.lang.InternalError: error initializing kernel caused by: java.lang.ExceptionInInitializerError
at weblogic.protocol.ClientEnvironment.loadEnvironment(ClientEnvironment.java:22)
at weblogic.kernel.Kernel.initialize(Kernel.java:92)
at weblogic.kernel.Kernel.ensureInitialized(Kernel.java:64)
at weblogic.rjvm.wls.WLSClientRJVMEnvironment.ensureInitialized(WLSClientRJVMEnvironment.java:55)
at weblogic.protocol.ServerURL.getDefaultURL(ServerU
Any help on the above issue?
Thanks,
NavinHi;
For your issue i suggest close your thread here as changing thread status to answered and move it to Forum Home » Database » JVM which is JVM dedicated forum site.
Regard
Helios -
What is the diffrences between Oracle 11g standard & enterprise edition
Hi,
Can anybody please tell the diffrences between Oracle 11g standard & enterprise edition in detail.
Thanks in advance,
AnindyaOracle Enterprise Edition:
Enterprise Edition is the full (top of the range) version or the Oracle Database Server. Options like RAC, Partitioning, Spatial, etc. can be purchased separately to enhance the functionality of the database.
Oracle Standard Edition:
Standard Edition is designed for smaller businesses and enterprises. It offers a subset of the features/ functionality implemented in Enterprise Edition. Database options like Data Guard, Partitioning, Spatial, etc. is not available with Standard Edition (from 10g one can use RAC with Standard Edition). Standard Edition can only be licensed on servers with a maximum capacity of four processors.
Oracle Standard Edition One:
Standard Edition One is a low cost, entry-level version of the Oracle Standard Edition database server. Standard Edition One can only be licensed on small servers with a maximum capacity of two processors.
Oracle Personal Edition:
Personal Oracle is a single user version of the database server. It is mostly the same as Enterprise Edition, but doesn't support advanced options like RAC, Streams, XMLDB, etc.
Oracle Lite:
Oracle Light is a database engine that can be used on mobile platforms like cell phones and PDA's.
Oracle XE:
Express Edition (XE) is a free, downloadable version of the Oracle database server. Oracle XE can only be used on single processor machines. It can only manage up to 4 GB of data and 1 GB of memory. ISVs can embed XE in 3rd party products and redistribute it freely.
Additional Reading:
Oracle10g Database Licensing Guide
(Part of the Oracle 10g Documentation Set)
Oracle9i Database New Features Guide
Chapter 5: Database Feature and Option Availability
Oracle Store
http://store.oracle.com/
source:http://www.orafaq.com/faq/what_is_the_difference_between_the_enterprise_standard_and_personal_editions_of_oracle -
Solaris x86 with Oracle RAC 10g Enterprise Edition Release 10.2.0.3.0
Hello,
Maybe you can help me (new on RMAN backup) in doing this.
I have configured a single Oracle 10g database to have backup with RMAN with following steps:
1. $ mkdir $ORACLE_BASE/rman_scripts
2. $ mkdir $ORACLE_BASE/logs
3. $ mkdir $ORACLE_BASE/tracking
4. $ mkdir $ORACLE_BASE/c_backup
5. $ sqlplus sys/<password> as sysdba
6. SQL> alter system set db_recovery_file_dest_size = 50G scope=both;
7. SQL> alter system set db_recovery_file_dest='${ ORACLE_BASE}/flash_recovery_ area' scope=both;
8. SQL> alter system set log_archive_dest_10='location= use_db_recovery_file_dest';
9. SQL> shutdown immediate
10. SQL> startup nomount
11. SQL> alter database archivelog;
12. SQL> alter database open;
13. SQL> alter database enable block change tracking using file '${ORACLE_BASE}/tracking/rman_ change_track.f';
14. $ rman target /
15. RMAN> CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK
TO '/var/opt/oracle/flash_ recovery_area/ORCL/c_backup/% F';
16. RMAN> CONFIGURE CONTROLFILE AUTOBACKUP ON;
17. RMAN> CONFIGURE BACKUP OPTIMIZATION ON;
18. RMAN> CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
19. RMAN> exit
I need to configure incremental backup with RMAN on a two node Solaris x86 with Oracle RAC 10g Enterprise Edition Release 10.2.0.3.0 installation.
We also use ASM to store database files, and have Oracle software installed on separate file systems (two Oracle roots for Node1 and Node2).
I have following questions:
1) where to put Flash Recovery Area (FRA)?
I saw recommendations to put FRA on the ASM, is this the best way to do it?
2) Can I put FRA on another file system (not on the ASM) which is available only from Node1? This way I can save space on the ASM.
3) Is it possible/recommended to run RMAN from Node1 only?
Below is the script used to run RMAN on the normal Oracle database (without RAC) which I need to change :
=============================================================================================
2.0 Oracle backup script: /opt/app/oracle/rman_scripts/backup.sh
Use this for daily backups, possiblly as a cron job.
Once a week run this: /opt/app/oracle/rman_scripts/backup.sh FULL
All other days of the week: /opt/app/oracle/rman_scripts/backup.sh INCREMENTAL
Note: You may have to change ORACLE_SID, ORACLE_BASE below to match your database.
=============================================================================================
#!/usr/bin/ksh
ORACLE_SID=orcl
ORACLE_BASE=/opt/app/oracle
ORACLE_HOME=${ORACLE_BASE}/product/10.2.0/db_1
PATH=${ORACLE_HOME}/bin:/usr/bin
LOGDIR=${ORACLE_BASE}/logs
LOGFILE=${LOGDIR}/rman.log
if [[ $# < 1 ]]
then
echo "usage: backup.sh FULL|INCREMENTAL"
exit;
fi
BACKUPTYPE=${1}
full='FULL'
incremental='INCREMENTAL'
if [[ $BACKUPTYPE == $full ]]
then
$ORACLE_HOME/bin/rman target / nocatalog log ${LOGFILE} append << eof
run {
backup database;
SQL 'alter system archive log current';
backup archivelog all;
delete noprompt obsolete;
exit;
eof
echo ''
fi
if [[ $BACKUPTYPE == $incremental ]]
then
$ORACLE_HOME/bin/rman target / nocatalog log ${LOGFILE} append << eof
run {
backup database;
backup incremental level 1 database;
SQL 'alter system archive log current';
backup archivelog all;
delete noprompt obsolete;
exit;
eof
echo ''
fiHi [email protected],
Q1) where to put Flash Recovery Area (FRA)?
A1) With RAC: on the shared storage
I saw recommendations to put FRA on the ASM, is this the best way to do it?
If you want your backups to be available for both nodes you have to use shared storage or tape using an mml library.
So if you want to use the FRA for rman backups and the database is on ASM just make ASM the standard for the FRA as well.
Q2) Can I put FRA on another file system (not on the ASM) which is available only from Node1? This way I can save space on the ASM.
A2) Than you cannot recover in case Node1 is down. Best would be to send your storage admin to a training course so he can manage the clustered raw devices needed for ASM.
Q3) Is it possible/recommended to run RMAN from Node1 only?
A3) No see A2.
Regards,
Tycho -
Java Mail throws Connect failed error in Oracle 11g Enterprise Edition
Hi,
I am using Oracle 11g Enterprise edition.I have a java class which is used for reading outlook 2010 inbox and download attachments from mails .For Connecting to OutLook from oracle i am using "POP3S" protocol in my java class. Which is working fine until my database is oracle-11g standard edition. Last week we are upgraded our database from oracle 11g standard edition to oracle 11g enterprise edition after that i can't connect to mail server through my java class which throws an error as follows.
DEBUG: setDebug: JavaMail version 1.4.4
DEBUG: getProvider() returning javax.mail.Provider[STORE,pop3s,com.sun.mail.pop3.POP3SSLStore,Sun Microsystems, Inc]
DEBUG POP3: mail.pop3s.rsetbeforequit: false
DEBUG POP3: mail.pop3s.disabletop: false
DEBUG POP3: mail.pop3s.forgettopheaders: false
DEBUG POP3: mail.pop3s.cachewriteto: false
DEBUG POP3: mail.pop3s.filecache.enable: false
DEBUG POP3: mail.pop3s.keepmessagecontent: false
DEBUG POP3: mail.pop3s.starttls.enable: true
DEBUG POP3: mail.pop3s.starttls.required: false
DEBUG POP3: mail.pop3s.apop.enable: false
DEBUG POP3: mail.pop3s.disablecapa: false
DEBUG POP3: connecting to host "194.42.133.180", port 110, isSSL true
javax.mail.MessagingException: Connect failed;
nested exception is:
javax.net.ssl.SSLException: Unrecognized SSL message, plaintext connection?
at com.sun.mail.pop3.POP3Store.protocolConnect(POP3Store.java:210)
at javax.mail.Service.connect(Service.java:295)
at javax.mail.Service.connect(Service.java:176)
at GetNoonReport.Connect2Mailserver(GetNoonReport:338)
at GetNoonReport.ReadMail(GetNoonReport:103)
Caused by: javax.net.ssl.SSLException: Unrecognized SSL message, plaintext connection?
at com.sun.net.ssl.internal.ssl.InputRecord.handleUnknownRecord(InputRecord.java:501)
at com.sun.net.ssl.internal.ssl.InputRecord.read(InputRecord.java)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(SSLSocketImpl.java)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(SSLSocketImpl.java:1025)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(SSLSocketImpl.java:1038)
at com.sun.mail.util.SocketFetcher.configureSSLSocket(SocketFetcher.java:507)
at com.sun.mail.util.SocketFetcher.getSocket(SocketFetcher.java:238)
at com.sun.mail.pop3.Protocol.<init>(Protocol.java:107)
at com.sun.mail.pop3.POP3Store.getPort(POP3Store.java:261)
at com.sun.mail.pop3.POP3Store.protocolConnect(POP3Store.java:206)
... 4 more
Is Oracle Enterprise Edition supports "POP3S" protocol?, Or Enterprise edition needs any additional configuration for establishing outlook connection with "pop3s" ?.
Any help is appreciated
Regards ,
Nisanth907833 wrote:
Hi,
I am using Oracle 11g Enterprise edition.I have a java class which is used for reading outlook 2010 inbox and download attachments from mails .For Connecting to OutLook from oracle i am using "POP3S" protocol in my java class. Which is working fine until my database is oracle-11g standard edition. Last week we are upgraded our database from oracle 11g standard edition to oracle 11g enterprise edition after that i can't connect to mail server through my java class which throws an error as follows.
I suspect root cause is with Java not Oracle.
Oracle RDBMS does NOT speak any "protocol" except SQL natively. -
De-install oracle enterprise edition 11g
Hello, I was installing oracle enterprise edition 11.2g and my pc shuted down. It installed but I don't know if I should have done any other setting, so I want to de-install it.
I run the command Deinstall in the command prompt and it asks me to write : Specify all Single Instance Listeners that are to be de-configured [LISTENER]:
Can you tell me how I can find which listeners I should write on ? Thank you.Hie the "Enter" button to accept defaults - the default listener name is LISTENER, so this should suffice
HTH
Srini -
Hello,
Is there a comprehensive published note from Oracle describing desupport notices for Oracle databases?
Mainly - Oracle9i Enterprise Edition Release 9.2.0.6.0 - 64bit Production, 10g r2 and 11g r1?
If so, can anyone provide the link? I do have Metalink access, so a note id would also be good.
Thanks,
RHi,
Please see these docs.
ALERT: Oracle9i Release 2 (9.2) Support Status and Alerts [ID 189908.1]
ALERT: Oracle 10g Release 1 (10.1) Support Status and Alerts [ID 263719.1]
ALERT: Oracle 10g Release 2 (10.2) Support Status and Alerts [ID 316900.1]
ALERT: Oracle 11g Release 1 (11.1) Support Status and Alerts [ID 454507.1]
Thanks,
Hussein
Maybe you are looking for
-
Can I transfer info from one macbook to another by using a firewire cable?
Can I transfer info from one mac to another by using a firewire cable?
-
FOLLOW UP ON brokendownIPOD THREAD
brokendownIPOD wrote that to solve the iPod not being recognized by iTunes or iPod installer, she simply "reformat[ted] the drive the USB cable is plugged into." Does anyone know what she means, or, more importantly, how one would do this? I've got a
-
SSL/TLS ciphers of an SMA (M-series) appliance
So SMA does not include sslconfig CLI command. We cannot reonfigure SSL/TLS ciphers as we do for ESA (C-series) appliances. Once I got instructions from TAC support telling, that I must download config file from SMA, edit those cipher parameters manu
-
My 2011 Macbook Pro is being very temperamental. When I'm logged in and using it, the simplest task of opening iPhoto will cause a freeze. Everything becomes unresponsive and I need to do a hard shut down. I usually wait about 10+ seconds before powe
-
Hi all; I am trying to do the drag and drop in RSA1; and it's not working got error msg "Drag Drop is switched off - switch on in RSADMIN/RSADMINSV"; I am not sure where is the setting for this? anyone pls thanks