11g Upgrade from 10.2.0.4 in SUSE 10.

Hi Gurus,
We have 11g Database upgrade on our EBS 11i environment, database size is around 1.3 TB, i already did test upgrade it was not satisfactory results what client is expecting regarding downtime, i followed manual upgrade as i am very much familier with that, i your views and suggestions to reduce upgrade downtime.
11g Upgrade from 10.2.0.4 in SUSE 10.

Hi,
Is your database is RAC or NON-RAC.
If you are going for patchset upgrade then you can go for roll upgrade patch.
as you know, you cannot escape the downtime always. ;-)
i already did test upgrade it was not satisfactory results what client is expecting regarding downtime, i followed manual upgrade as i am very much familier with thatOracle introduces DBUA with many features, still why you are not going for DBUA?
You have to test the TEST environment using DBUA ;-)
If for example For 1.3 TB you are going to consistent backup, still you have down time. then there is no point to think on UPGRADE duration.
but you can perform pro-actively like.. install the 11g ORACLE_HOME before the downtime. & so on.

Similar Messages

Discoverer 11g upgrade from 4i

Hi,
We have recently upgraded our discoverer 4i to 11g but we are facing the error:
unable to open the worksheet requested:
- Oracle BI Discoverer is unable to find the requested worksheet.
- BIB-10310 An unknown exception occurred.
We have already tried the notes
Opening Workbook In Discoverer 10g/11g Viewer Fails with Error: Unable To Open The Worksheet Requested. BIB-10310 [ID 1331330.1]
Opening Discoverer 10g/11g Shared Workbook Fails With "Item Not Found" Or "BIB-10310 Unknown Exception Occured" Errors [ID 402609.1]
Any suggestion would be helpful.

Hi Hussein,
We found that the issue was with respect to Discoverer Viewer.
All the Workbooks opening from viewer are ending up with the above error.
The Same report by the same user can be opened in Plus and Desktop.
I found the below information in discoverer application log.
/u02/app/Middleware/user_projects/domains/Mike_Disco_Domain/servers/WLS_DISCO/logs/discoverer/diagnostic.log
[2013-07-15T01:55:22.415-05:00] [WLS_DISCO] [ERROR] [] [ORACLE.DISCOVERER.VIEWER] [tid: 10] [userId: <anonymous>] [ecid: 0000
JzWw5CjF0F85zjK6yW1Hst5s000001,0] [APP: discoverer#11.1.1.2.0] error.open.worksheet.failed[[
oracle.discoverer.applications.viewer.controllers.ControllerException: error.open.worksheet.failed
        at oracle.discoverer.applications.viewer.controllers.ExplorerController.handleOpenWorksheet(Unknown Source)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:48)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:600)
        at oracle.discoverer.applications.framework.RequestProcessor.execute(Unknown Source)
        at oracle.discoverer.applications.framework.WorkerThread.run(Unknown Source)
        at java.lang.Thread.run(Thread.java:738)
Caused by: oracle.discoverer.applications.viewer.model.ModelException: error.worksheet.lookup.failed
        at oracle.discoverer.applications.viewer.model.Connection.lookupWorksheet(Unknown Source)
        at oracle.discoverer.applications.viewer.model.WorksheetModel.<init>(Unknown Source)
        at oracle.discoverer.applications.viewer.model.ViewerModelImpl.openWorksheet(Unknown Source)
        at oracle.discoverer.applications.viewer.model.ViewerModelImpl.openWorksheet(Unknown Source)
        ... 8 more
Caused by: oracle.dss.bicontext.BINamingException: BIB-10310 An unknown exception occurred.
oracle.dss.metadataManager.common.MetadataManagerException: BIB-10101 Handler failed to handle UserObject.
        at oracle.dss.metadataManager.common.MDFolder.lookup(MDFolder.java:402)
        at oracle.dss.metadataManager.common.MDFolder.lookup(MDFolder.java:318)
        at oracle.dss.metadataManager.common.MDFolder.lookup(MDFolder.java:626)
        at oracle.discoverer.applications.viewer.model.RelationalConnection.lookup(Unknown Source)
        at oracle.discoverer.applications.viewer.model.RelationalConnection.lookupWorksheet(Unknown Source)
        ... 12 more
[2013-07-15T01:55:22.416-05:00] [WLS_DISCO] [ERROR] [] [ORACLE.DISCOVERER.VIEWER] [tid: 10] [userId: <anonymous>] [ecid: 0000
JzWw5CjF0F85zjK6yW1Hst5s000001,0] [APP: discoverer#11.1.1.2.0] BIB-10310 An unknown exception occurred.[[
java.lang.NullPointerException
        at oracle.dss.gridView.GridViewDefaultValues.getCornerComponentColor(GridViewDefaultValues.java:149)
        at oracle.dss.thin.beans.gridView.ThinGridView.<init>(ThinGridView.java:4517)
        at oracle.dss.thin.beans.table.ThinTable.<init>(ThinTable.java:177)
        at java.lang.J9VMInternals.newInstanceImpl(Native Method)
        at java.lang.Class.newInstance(Class.java:1549)
        at oracle.dss.persistence.persistencemanager.client.DefaultObjectFactory.getObjectInstance(DefaultObjectFactory.java:
215)
        at oracle.dss.persistence.persistencemanager.client.disco.DiscoObjectFactory.getObjectInstance(DiscoObjectFactory.jav
a:141)
        at oracle.dss.persistence.persistencemanager.client.DefaultStateHandler.recreatePersistableFromStateAgent(DefaultStat
eHandler.java:375)
        at oracle.dss.metadataManager.client.handlers.persistence.PersistenceMetadataHandler$MDStateHandler.recreatePersistab
leFromStateAgent(PersistenceMetadataHandler.java:491)
        at oracle.dss.persistence.persistencemanager.client.DefaultStateHandler.loadAggregates(DefaultStateHandler.java:257)
        at oracle.dss.persistence.persistencemanager.client.DefaultStateHandler.recreatePersistableFromStateAgent(DefaultStat
eHandler.java:401)
        at oracle.dss.metadataManager.client.handlers.persistence.PersistenceMetadataHandler$MDStateHandler.recreatePersistab
leFromStateAgent(PersistenceMetadataHandler.java:491)
        at oracle.dss.metadataManager.client.handlers.persistence.PersistenceMetadataHandler.getObjectInstance(PersistenceMet
adataHandler.java:669)
        at oracle.dss.metadataManager.client.MetadataManager.handleStateAgent(MetadataManager.java:6328)
        at oracle.dss.metadataManager.client.MetadataManager.lookup(MetadataManager.java:5958)
        at oracle.dss.metadataManager.common.MDFolder.lookup(MDFolder.java:377)
        at oracle.dss.metadataManager.common.MDFolder.lookup(MDFolder.java:318)
        at oracle.dss.metadataManager.common.MDFolder.lookup(MDFolder.java:626)
        at oracle.discoverer.applications.viewer.model.RelationalConnection.lookup(Unknown Source)
        at oracle.discoverer.applications.viewer.model.RelationalConnection.lookupWorksheet(Unknown Source)
        at oracle.discoverer.applications.viewer.model.Connection.lookupWorksheet(Unknown Source)
        at oracle.discoverer.applications.viewer.model.WorksheetModel.<init>(Unknown Source)
        at oracle.discoverer.applications.viewer.model.ViewerModelImpl.openWorksheet(Unknown Source)
        at oracle.discoverer.applications.viewer.model.ViewerModelImpl.openWorksheet(Unknown Source)
        at oracle.discoverer.applications.viewer.controllers.ExplorerController.handleOpenWorksheet(Unknown Source)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:48)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
Can you help us in this regard
Thanks
Krishna

OIM 11g Upgrade from OIM 9.1.1

Hi All,
We are planing to upgrade OIM 9.1.1 to OIM 11g, I have seen the impact analysis in the link "http://www.oracle.com/technetwork/middleware/id-mgmt/learnmore/upgrading-oim9x-to-oim11g-wp-365479.pdf". I am bothering about OIM Objects (Forms,Adapters,Lookups), How the impact will be?
In that document, they said, There is no Prepopulated adapters and changes in Enitity adapters and APIs are also changed.
1. So de we need to implement all adapters in OIM 11g again, or can we directly import them?
2. For API changes, Do we need to update all APIs in my custom adapters? or will old APIs work on OIM 11g?
3. Can we directly load all Lookups directly?
We dont have any Approval workflows, We have simple direct provisioning using custom adapters, we dont have policies also. Through Groups, we have assigned the AD and Exchange resources to the users
Please suggest me.
Thanks

The document details which pieces of OIM exist in 9.x and 11g. Table 2.2.1 identifies all the request related objects in 9.1 and 11gR1 and which can be migrated. It lists pre-populate adapters, but this could only be on the object side, they will still exist as is in the process side for provisioning. As part of your upgrade plan, you will need to identify how to recreate the non-upgradable items and how they are integrated into the parts of OIM once it is migrated to 11gR1.
In section 2.7 Entity Adapters and Event Handlers behave differently. So in 9.x if you have any of these for custom code, you will need to identify how to recreate these in 11gR1 and attach them into the existing processes so your existing functionality will be intact.
As for APIs, none of the old APIs go away. A portionof them listed in section 2.8.2 have been identified as legacy APIs and how they map to the new service. You can continue usage of old ones, but the suggestion is to make any new ones with the latest API set. I woudl assume the only exception for APIs that wont work would be the tcRequestOperationsIntf since this will not exist in 11g. You'll need to use the APIs to access the BPEL and SOA data in the database instead.
The overall process is an evaluation of every connector you have implemented and all your functionality. Identify which pieces can and can't be migrated, and then either recreate the functionality in 11g or create new functionality within the 11g product instead. It will be a very lengthy process, which is essentially reviewing your whole implementation.
I hope this gives you some idea of the changes to be expected. The utility will migrate the pieces it can, but then it's up to you and your client to implement the pieces that could not be converted. Then you get to evaluate the new features of the product and which ones you want to use.
-Kevin

Oracle 11g upgrade from Oracle 10.2.0.4

Dear Friends,
I am upgrading Oracle 11g on OS HP-UX11i v2 with SAP ECC6.0 application.
But I m getting the error as below.
Error in invoking target 'links proc gen_pcscfg' of makefile '/oracle/DVR/11202/precomp/lib/ins_precomp.mk'. See '/oracle/oraInventory/logs/installActions2011-08-09_05-51-08PM.log' for details.
Please find the output of make.log file.
                 /usr/ccs/bin/ar rv /oracle/DVR/11202/lib/libn11.a /oracle/DVR/
11202/lib/nnfgt.o ; fi)
        (if [ "compile" = "binary" ] ; then \
          /oracle/DVR/11202/bin/gennfgt > nnfgt.c
          TARGET_BINARY_INTERFACE=
          export TARGET_BINARY_INTERFACE
          cc +DD64 -c nnfgt.c
          -rm -f /oracle/DVR/11202/lib/nnfgt.o
          -mv nnfgt.o /oracle/DVR/11202/lib/
                  /usr/ccs/bin/ar rv /oracle/DVR/11202/lib/libn11.a /oracle/DVR/
11202/lib/nnfgt.o ; fi)
/usr/ccs/bin/make -f ins_rdbms.mk client_sharedlib ORACLE_HOME=/oracle/DVR/11202
/       /oracle/DVR/11202/bin/genclntsh
genclntsh: Failed to link libclntsh.so.11.1
Error exit code 1
Stop.
/usr/ccs/bin/make -f ins_rdbms.mk client_sharedlib ORACLE_HOME=/oracle/DVR/11202
/       /oracle/DVR/11202/bin/genclntsh
genclntsh: Failed to link libclntsh.so.11.1
Error exit code 1
Stop.
/usr/ccs/bin/make -f ins_precomp.mk links proc gen_pcscfg ORACLE_HOME=/oracle/DV
R/11202/        (cd /oracle/DVR/11202/precomp/public/; rm -f SQLCA.H)
        (cd /oracle/DVR/11202/precomp/public/; rm -f ORACA.H)
        (cd /oracle/DVR/11202/precomp/public/; rm -f SQLDA.H)
        (cd /oracle/DVR/11202/precomp/public/; rm -f SQLCA.COB)
        (cd /oracle/DVR/11202/precomp/public/; rm -f ORACA.COB)
        (cd /oracle/DVR/11202/precomp/public/; rm -f SQLCA.FOR)
        (cd /oracle/DVR/11202/precomp/public/; rm -f ORACA.FOR)
        (cd /oracle/DVR/11202/precomp/public/; rm -f BNDDSC.FOR)
        (cd /oracle/DVR/11202/precomp/public/; rm -f SELDSC.FOR)
        cd /oracle/DVR/11202/precomp/public/; test ! -f sqlca.h    || ln -s sqlc
a.h    SQLCA.H
        cd /oracle/DVR/11202/precomp/public/; test ! -f oraca.h    || ln -s orac
a.h    ORACA.H
        cd /oracle/DVR/11202/precomp/public/; test ! -f sqlda.h    || ln -s sqld
a.h    SQLDA.H
        cd /oracle/DVR/11202/precomp/public/; test ! -f sqlca.cob || ln -s sqlc
a.cob SQLCA.COB
        cd /oracle/DVR/11202/precomp/public/; test ! -f oraca.cob || ln -s orac
a.cob ORACA.COB
        cd /oracle/DVR/11202/precomp/public/; test ! -f sqlca.for || ln -s sqlc
a.for SQLCA.FOR
        cd /oracle/DVR/11202/precomp/public/; test ! -f oraca.for || ln -s orac
a.for ORACA.FOR
        cd /oracle/DVR/11202/precomp/public/; test ! -f bnddsc.for || ln -s bndd
sc.for BNDDSC.FOR
        cd /oracle/DVR/11202/precomp/public/; test ! -f seldsc.for || ln -s seld
sc.for SELDSC.FOR
        /usr/ccs/bin/make -f /oracle/DVR/11202/precomp/lib/ins_precomp.mk relink
EXENAME=proc
Linking /oracle/DVR/11202/precomp/lib/proc
ld: Can't find library for -lclntsh
Fatal error.
Error exit code 1
Stop.
Error exit code 1
Stop.
Regards
Ganesh Datt Tiwari

HP-UX 11.23 is not supported with Oracle 11, you need 11.31:
Note 1431796 - Oracle 11.2.0: Troubleshooting the Software Installation
<...>
Installing Oracle Database 11.2.0.2 on HP-UX 11.23 (11i V2)
is not supported (see Oracle Installation Guide).
Minimum OS version is 11.31 (11i V3).
<...>
Markus

Oracle 11g upgrade: How to update stale statistics for sys and sysman?

Hi,
I am in the process of testing Oracle 11g upgrade from Oracle 10.2.0.3. I have run utlu111i.sql on the 10g database.
The utility utlu111i.sql reports about the stale statistics for SYS and SYSMAN components.
I executed dbms_stats.gather_dictionary_stats; dbms_stats.gather_schema_stats('SYS'); and dbms_stats.gather_schema_stats('SYSMAN');
After that the utlu111i.sql still reports the stale statistics for sys and sysman. Does anyone know how to get rid off this warning successfully?
Thanks,
Sreekanth

Does anyone know how to get rid off this warning successfully?Just ignore the warnings. Check The Utlu111i.Sql Pre-Upgrade Script Reports Stale Sys Statistics - 803774.1 from Metalink.

Oracle Upgrade from 10g to 11g [BRANCHED BY MODERATOR]

Hi Deepak/Folks,
Another question that I have is that while doing the Oracle Upgrade on an EP server, the patches were not installed properly and I had to shut down the Patches installation after it did not do anything for a while.
Now when I try to install the patches it fails telling me that the Installed patches cannot be verified, I had written to SAP and they told me to follow the
SAP note 1862446 - Inventory
load failed... OPatch cannot load inventory for the given Oracle Home
and re-create the oracle inventory.
This has also not helped in anyway.
Is there a solution to this problem.
Following is the error that I am getting when I try to Install the patches
Getting pre-run patch inventory...
Getting pre-run patch inventory...failed.
Cannot get pre-run patch inventory.
Refer to log file
$ORACLE_HOME/cfgtoollogs/mopatch/mopatch-2014_08_06-14-52-51.log
when I open the log file specified here I get the following
more mopatch-2014_08_06-14-52-51.log
more /oracle/<SID>/11203/cfgtoollogs/mopatch/mopatch-2014_08_06-15-01-51.log
MOPatch - Install Multiple Oracle Patches in One Run - 2.1.15.
Copyright (c) 2007, 2013, Oracle and/or its affiliates. All rights reserved.
Version:       2.1.15
Revision:      5.1.2.26
Command-line: /oracle/<SID>/11203/MOPatch/mopatch.sh -v -s SAP11203P_1312-20009978.zip
Oracle Home:   /oracle/<SID>/11203
RDBMS version: 11.2.0.3.0
OPatch version:11.2.0.3.3
Clean-up:      supported
PSUs:          supported
Log file:      $ORACLE_HOME/cfgtoollogs/mopatch/mopatch-2014_08_06-15-01-51.log
Patch base:    .
Patch source: SAP11203P_1312-20009978.zip
Link script:   ./link.mts<SID>ua.sh
Readmes:       <none>
Strpd. Readmes:<none>
make utility: /usr/ccs/bin/make
unzip utility: /oracle/<SID>/11203/bin/unzip
User name:     ora<SID>
Working dir:   /oracle/stage
System:        HP-UX mts<SID>ua B.11.31 U ia64 2468369872 unlimited-user license
Disk free:     11734549 KBytes on /oracle/<SID>
Disk required: 886496 KBytes on /oracle/<SID>
Getting pre-run patch inventory...
executing: "/oracle/<SID>/11203/OPatch/opatch" lsinventory -retry 0 -xml "./mopatch-187-21696-tmpdir/preinv.xml"
========================================================
GENERIC OPATCH VERSION - FOR USE IN SAP ENVIRONMENT ONLY
========================================================
Oracle Interim Patch Installer version 11.2.0.3.3
Copyright (c) 2012, Oracle Corporation. All rights reserved.
Oracle Home       : /oracle/<SID>/11203
Central Inventory : /oracle/<SID>/oraInventory
   from           : /oracle/<SID>/11203/oraInst.loc
OPatch version    : 11.2.0.3.3
OUI version       : 11.2.0.3.0
Log file location : /oracle/<SID>/11203/cfgtoollogs/opatch/opatch2014-08-06_15-01-56PM_1.log
List of Homes on this system:
Inventory load failed... OPatch cannot load inventory for the given Oracle Home.
Possible causes are:
   Oracle Home dir. path does not exist in Central Inventory
   Oracle Home is a symbolic link
   Oracle Home inventory is corrupted
LsInventorySession failed: OracleHomeInventory gets null oracleHomeInfo
OPatch failed with error code 73
Getting pre-run patch inventory...failed.
Cannot get pre-run patch inventory. Exiting.
I would appreciate if you folks can help me out on this
Thanks
APS

FOLLOW UP QUESTION BRANCHED:
Oracle Upgrade from 10g to 11g [BRANCHED BY MODERATOR]

UPgrade from 10g to 11g

Dear All,
I am using 10.2.0.1 database and planning to upgrade to 11.1.0.6 and while executing the utlu102i.sql I found the database is using the old timezone.
SQL> select * from v$timezone_file;
FILENAME VERSION
timezlrg.dat 2
The issue is there is no patch available for the timezone upgrade for the windows platform in metalink.
Questions?
1. How can I upgrade the Time zone version before upgrading the database to 11g, if there is no patch available.
2. It is mandatory to upgrade the timezone or 11g will automatically upgrade it.
3. If I will go for the database upgrade without updating the timezone, will update fail.
4. Do I have to upgrade the timezone to the current database (10.2.0.1) and then install the 11g binaries and start the upgrade or install the 11g binary first and apply the patch on 11g and then start the database upgrade.
Below is the some part of the output of utlu102i.sql
Miscellaneous Warnings
WARNING: --> Database is using an old timezone file version.
.... Patch the 10.2.0.1.0 database to timezone file version 4
.... BEFORE upgrading the database. Re-run utlu111i.sql after
.... patching the database to record the new timezone file version.
WARNING: --> Database contains stale optimizer statistics.
.... Refer to the 11g Upgrade Guide for instructions to update
.... statistics prior to upgrading the database.
.... Component Schemas with stale statistics:
.... SYS
.... OLAPSYS
.... SYSMAN
.... CTXSYS
.... XDB
WARNING: --> Database contains schemas with objects dependent on network
packages.
.... Refer to the 11g Upgrade Guide for instructions to configure Network ACLs.
.... USER SYSMAN has dependent objects.
WARNING: --> EM Database Control Repository exists in the database.
.... Direct downgrade of EM Database Control is not supported. Refer to the
.... 11g Upgrade Guide for instructions to save the EM data prior to upgrade.
Eagarly waiting for your response.
Thanks in advance.

1. How can I upgrade the Time zone version before upgrading the database to 11g, if there is no patch available.
See Metalink Document How To Apply The V4 DST Patches To Windows Clients or Servers [ID 417893.1], this should help you here.
2. It is mandatory to upgrade the timezone or 11g will automatically upgrade it.
You will need to update the Timezone to V4 prior to attempting an upgrade
3. If I will go for the database upgrade without updating the timezone, will update fail.
Yes that upgrade will not work without first updating the timezone for the 10.2.0.1 database you have
4. Do I have to upgrade the timezone to the current database (10.2.0.1) and then install the 11g binaries and start the upgrade or install the 11g binary first and apply the patch on 11g and then start the database upgrade.
The binary installations can be handled separately, however no upgrade operations can happen until the DST v4 is taken care of for the upgrade.
Edited by: mrmessin on Dec 31, 2009 1:41 AM

Images after upgrade from 10g to 11g

We recently upgraded from 10g to 11g and all the images are broke in the dashboard.
Can anyone provide the steps needs to be done in order to fix the broken images?
Thanks.

Put image files at
Drive:\Oracle\Middleware\Oracle_BI1\bifoundation\web\app\res\s_blafp\images
Drive:\Oracle\Middleware\user_projects\domains\bifoundation_domain\servers\bi_server1\tmp\_WL_user\analytics_11.1.1\7dezjl\war\res\s_blafp\images
If required
Drive:\Oracle\Middleware\user_projects\domains\bifoundation_domain\servers\AdminServer\tmp\.appmergegen_1291264099332\analytics.ear\ukjjdc\res\s_blafp\images
Call them using fmap
Syntax: fmap:images/imagename.imageformat
for e.g: fmap:images/geograph.jpg
Pls mark correct/helpful if helps

Error during upgrade from OBIEE 10G to 11G

Hello All
I ran into this issue while trying to upgrade my 10g RPD and catalog to 11.1.1.7
After installing 11G, I launched the upgrade utility from Oracle_Common/bin/ua in linux.
I am getting the below error:
UPGAST-00797: Oracle Fusion Middleware Upgrade Assistant cannot be run from an Application Developer Oracle home.
Based on the Oracle Doc. it has the following desc:
UPGAST-00797: Oracle Fusion Middleware Upgrade Assistant cannot be run from an Application Developer Oracle home.
Cause: The user has chosen to perform a upgrade from an Oracle home that does not allow an upgrade.
Action: None.
Level: 1
Type: ERROR
Impact: Upgrade
So what should I do to resolve this issue?
Thanks in advance

Hi,
First of all i am not familiar on linux box.
I tried in windows environment the rpd is deployed with out any errors.
But i ran the ua.bat file in the following path
\MWHOME\Oracle_BI1\bin\ua.bat.
while i am running in oracle_common\bin\ua.bat is not responding in my local system.
Please Mark if it helpful.
Thanks

Challenges while Upgrading from OBIEE 10g to 11g

Hi Gurus,
This is Kiran again. This time I am back with the upgradation issues. We have a client which is currently on OBIEE 10g. All components are already configured in OBIEE 10g with client on RPD, Catalog and implemented all security levels for those.
Now the challenge is to upgrade all activities which we have configured in OBIEE 10g. I have seen lot of stuff online and understood how to upgrade from OBIEE 10g to OBIEE 11g by simply clicking on ua.bat file. But I am unable to understand the process how it is upgrading the securities and environments.
Can anyone help me out by providing necessary stuff I need to take care of before taking the decision to upgrade from OBIEE 10g to 11g.
And also please clear me whether we will have any challenges in upgrading process. If yes, then what kind of challenges we will face and what kind of necessary steps we need to implement to resolve it.
What kind of Architecture we need to follow?
How Schedulers will get upgraded?
Please help me out with your real experiences (Not the online websites). Your response will be highly appreciated and it will help lot of OBIEE professionals who are in the process of upgradation.
Thanks in Advance to all OBIEE GURUS.
Kiran

Hi Valli,
There is really great information available in this link. But I would like to know whether any one faced any issues while upgrading from OBIEE 10g to 11g. Please do share us few issues....
Edited by: 949144 on Nov 27, 2012 9:44 AM

Upgrade ebs Database 10G to 11G (Os upgrade from 32 to 64)

I have to perform the following upgrade:
ebs Database 10G to 11G (Os upgrade from 32 to 64)
Any information is welcome.
Thank you in advance.
Edited by: Atanas Cholakov on Nov 19, 2012 2:27 AM

Please also see:
11gR2 11.2.0.3 Database Certified with E-Business Suite
https://blogs.oracle.com/stevenChan/entry/11gr2_11_2_0_3
Thanks,
Hussein

Upgrading from 9,2.0.6 (HP-UX) to 10g or 11g on Redhat Linux?

Generally what are the steps to upgrade from 9,2.0.6 (HP-UX) to 10g or 11g on Redhat Linux?
Can I exp the database on 9.2.0.6 (HP-UX) then imp the database to a new 10/11g database (RedHat Linux)?
Is this the simplest way?

To change platforms require the database instance be re-built and / or the data moved using one of the following methods:
Export / Import to include the use of Datapump facilities. all versions support Export/Import but for Datapump 10.1.0.2 or higher is required
Transportable Tablespaces 10G or Later
RMAN Convert Database functions. 10G or Later
Streams Replication
Create Table As Select (CTAS)
Oracle Golden Gate
As your database is 9.2.0.6 you can only use export/import. Please refer to the MOS doc 733205.1 for further clarification

LDAP synch not supported during OIM upgrade from 9.x to 11g

Hi Experts,
Following line is mentioned in OIM upgrade guide for 9.x to 11g (http://docs.oracle.com/cd/E21764_01/upgrade.1111/e10129/upgrade_oim.htm)
“LDAP Sync is not supported when you upgrade from Oracle Identity Management 9.1 to Oracle Identity Management 11g”
Please help me in understanding the above line.
I have a pretty simple setup of OIM (version 9.1.0.2) with AD and Exchange connected. I guess I don't have any impact of above line.
LDAP synch is required when we integrate oracle identity manager with oracle access manager.
Please suggest.
Thanks
M S

Yes LDAP Sync has most of the features when you have OIM and OAM integrated with each other. You can go ahead with upgrade if LDAP Sync is not part of your requirement.

Upgrade from Oracle 8i in Win98 to Oracle 11g in Window Vista

Hi,
I have an existing system that runs in Window98 using Oracle 8i as database. We are planning to convert the system from using Oracle 8i to 11g, and this new converted system will be running in Window Vista.
What I have in mind is doing export and import from Oracle 8i to 11g, but it is quite troublesome. Is there anyway I can upgrade the db to 11g in Window Vista?

Hi,
When upgrading from 8i to 11g, you cannot perform direct upgrade anyway.
If you want to upgrade (not using exp/imp), you can install 9i (9.2.0.4 and up) on the win98 machine, and upgrade the database to 9i.
Then you can take the database files, copy them (like cold backup) to the vista server, and you will able to upgrade it to 11g.
Note that you cannot use the DBUA in this scenario, you will have to upgrade it manually.
Manual upgrade: [http://download.oracle.com/docs/cd/B28359_01/server.111/b28300/upgrade.htm#i1011600]
Liron Amitzi
Senior DBA consultant
[www.dbsnaps.com]
[www.orbiumsoftware.com]

Need to upgrade from 8i OCP to 11g OCP

I had my 8i DBA OCP a long time ago (2002). Now I'm planning to upgrade it to 11g OCP. I have a couple of questions about my options.
I know one of my options is to upgrade to 10g first and them upgrade from 10g to 11g.
But what about if I would like to take 11g tests, such as 1Z0-052, 1Z0-053? This will be my second option.
1) In my second option, will my exsiting IZO-001 (Introduction to Oracle SQL and PL/SQL) pass remains valide as an SQL exemption?
2) Since I already have OCP, will I exempt for oracle hands on training?
BTW, I already have an account in CertView and see all my certification information.
Thanks very much for any help.
Best Regards
Cindy

1004605 wrote:
I had my 8i DBA OCP a long time ago (2002). Now I'm planning to upgrade it to 11g OCP. I have a couple of questions about my options.
I know one of my options is to upgrade to 10g first and them upgrade from 10g to 11g.
But what about if I would like to take 11g tests, such as 1Z0-052, 1Z0-053? This will be my second option.
1) In my second option, will my exsiting IZO-001 (Introduction to Oracle SQL and PL/SQL) pass remains valide as an SQL exemption?Yes.
2) Since I already have OCP, will I exempt for oracle hands on training?
You will be exempt.
BTW, I already have an account in CertView and see all my certification information.
Thanks very much for any help.
Best Regards
CindyI dont have time to seek out the authorive posts from times past.
But for an 8i DBA OCP with 1z0-001 then passes in 1z0-052 + 1z0-053 will achieve 11g DBA OCP certification with no additional training.
I will often recommend raising an Service Request to confirm this; as it would be a very expensive investment in money/time if it were not to be the case.
Thankou for giving all relevant information which has made the answer easy for me to give.

11g Upgrade from 10.2.0.4 in SUSE 10.

Similar Messages

Maybe you are looking for