11gr1 DB console not showing the cluster instances

Hi All,
11.1.0.7 DB with DB console deployed.
1). EM upload agent command works but on DB console, I am not able to see the cluster instances...
any config file I need to review?
I don't see any errors....the emctl dbconsole commands all work fine.

Hi,
Run the following command to check if the cluster instances have been discovered:
<Database Home>/bin/emctl config agent listtargets
If necessary, see Support note 578011.1 for instructions on using emca to add an instance to DB control.
Regards,
- Loc

Similar Messages

Oracle9i installation on Sun cluster not showing the cluster config screen

Hi All,
We are trying to install Oracle 9i RAC on a 2 node Sun cluster. The oracle installer never shows up the cluster configuration screen. However if we run the preInstall checker script from oracle (Installprecheck.sh) , it reports that it has indeed detected the cluster. Can anyone please help us out of this predicament.
-Kishore

Hi Kishore,
I 'm assuming the following:
. Sun Cluster 3.1 will be used to support Oracle 9i RAC
. Oracle is being installed on a file system instead of raw devices
To answer your question, a clustered file system must be present in order for Oracle 9i RAC Installer to recognize that a cluster exists before it displays the cluster configuration screen at the beginning of the installation.
Prior to QFS 4.2, Sun did not support a clusteed file system. All Oracle RAC systems for Solaris were raw device based. You're in luck now because Sun has released Sun QFS 4.2 which support a clustered file system.

Listener not showing the instance for informix.

Hi All,
I am using oracle gateway 11g and here I just discovered that the one of the database listener not showing the instance for the informix gatways, though it has already configured. whereas on other database , the listner is showing the instances for informix database. it was running fine few days back though.
would appriciate , if you coule let me know that why it suddenly stop responding ?
----------------- OK Listener ----------------------------
ptmsap> lsnrctl status LISTENER_PTMSAP
LSNRCTL for Linux: Version 11.2.0.3.0 - Production on 29-JUL-2012 05:07:07
Copyright (c) 1991, 2011, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=TCP)(Host=10.222.68.34)(Port=1621))
STATUS of the LISTENER
Alias                     LISTENER_PTMSAP
Version                   TNSLSNR for Linux: Version 11.2.0.3.0 - Production
Start Date                19-JUL-2012 10:25:25
Uptime                    9 days 18 hr. 41 min. 41 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   /db/ptmsap11/oracle/product/11.2.0/network/admin/listener.ora
Listener Log File         /db/ptmsap11/oracle/diag/tnslsnr/tbx4new/listener_ptmsap/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.222.68.34)(PORT=1621)))
Services Summary...
Service "MSCARD4" has 1 instance(s).
Instance "MSCARD4", status UNKNOWN, has 1 handler(s) for this service...
Service "as400" has 1 instance(s).
Instance "as400", status UNKNOWN, has 1 handler(s) for this service...
Service "db2test" has 1 instance(s).
Instance "db2test", status UNKNOWN, has 1 handler(s) for this service...
Service "ptmsap" has 1 instance(s).
Instance "ptmsap", status UNKNOWN, has 1 handler(s) for this service...
Service "tg4ifmx" has 1 instance(s).
Instance "tg4ifmx", status UNKNOWN, has 1 handler(s) for this service...
Service "tg4trai" has 1 instance(s).
Instance "tg4trai", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
LISTENER_PTMSAP =
(ADDRESS_LIST =
        (ADDRESS =
          (PROTOCOL = TCP)
          (Host = host_ip)
          (Port = 1621)
SID_LIST_LISTENER_PTMSAP =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = ptmsap)
      (ORACLE_HOME = /db/ptmsap11/oracle/product/11.2.0)
      (PRESPAWN_MAX = 10)
   (SID_DESC=
     (SID_NAME=tg4ifmx)
     (ORACLE_HOME=/db/ptmsap11/oracle/product/11.2.0)
     (PROGRAM=dg4ifmx)
   (SID_DESC=
      (SID_NAME=tg4trai)
      (ORACLE_HOME=/db/ptmsap11/oracle/product/11.2.0)
      (PROGRAM=dg4ifmx)
   (SID_DESC=
     (SID_NAME=db2test)
     (ORACLE_HOME=/db/ptmsap11/oracle/product/11.2.0)
     (PROGRAM=dg4db2)
   (SID_DESC=
     (SID_NAME=as400)
     (ORACLE_HOME=/db/ptmsap11/oracle/product/11.2.0)
     (ENV="LD_LIBRARY_PATH=/db/ptmsap11/oracle/product/11.2.0/dg4db2/driver/lib:/db/ptmsap11/oracle/product/11.2.0/lib")
     (PROGRAM=dg4db2)
(SID_DESC=
    (SID_NAME=MSCARD4)
    (ORACLE_HOME=/db/ptmsap11/oracle/product/11.2.0)
    (PROGRAM=dg4odbc)
    (ENVS=LD_LIBRARY_PATH=/opt/minisoft:/db/ptmsap11/oracle/product/11.2.0)
+++++++ Not OK Listener++++++++++++++++++
LISTENER_SMI =
(ADDRESS_LIST =
        (ADDRESS =
          (PROTOCOL = TCP)
          (Host = host_ip)
          (Port = 1821)
SID_LIST_LISTENER_SMI =
(SID_LIST =
     (SID_DESC=
     (SID_NAME=SMICAN)
     (ORACLE_HOME=/pdsdev/ptmqa/oracle/product/11.2.0/db)
     (ENV="LD_LIBRARY_PATH=/pdsdev/ptmqa/oracle/product/11.2.0/db/dg4db2/driver/lib:/pdsdev/ptmqa/oracle/product/11.2.0/db/lib")
     (PROGRAM=dg4db2)
        (SID_DESC=
        (SID_NAME=SMIINTL)
        (ORACLE_HOME=/pdsdev/ptmqa/oracle/product/11.2.0/db)
        (ENV="LD_LIBRARY_PATH=/pdsdev/ptmqa/oracle/product/11.2.0/db/dg4db2/driver/lib:/pdsdev/ptmqa/oracle/product/11.2.0/db/lib")
        (PROGRAM=dg4db2)
        (SID_DESC=
        (SID_NAME=SMIMEL)
        (ORACLE_HOME=/pdsdev/ptmqa/oracle/product/11.2.0/db)
        (ENV="LD_LIBRARY_PATH=/pdsdev/ptmqa/oracle/product/11.2.0/db/dg4db2/driver/lib:/pdsdev/ptmqa/oracle/product/11.2.0/db/lib")
        (PROGRAM=dg4db2)
        (SID_DESC=
        (SID_NAME=SMIMRKTS)
        (ORACLE_HOME=/pdsdev/ptmqa/oracle/product/11.2.0/db)
        (ENV="LD_LIBRARY_PATH=/pdsdev/ptmqa/oracle/product/11.2.0/db/dg4db2/driver/lib:/pdsdev/ptmqa/oracle/product/11.2.0/db/lib")
        (PROGRAM=dg4db2)
LISTENER_PTMQA11 =
(ADDRESS_LIST =
        (ADDRESS =
          (PROTOCOL = TCP)
          (Host = host_ip)
          (Port = 1521)
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = ptmqa11)
      (ORACLE_HOME = /pdsdev/ptmqa/oracle/product/11.2.0/db)
      (PRESPAWN_MAX = 10)
   (SID_DESC=
     (SID_NAME=tg4ifmx)
     (ORACLE_HOME=/pdsdev/ptmqa/oracle/product/11.2.0/db)
     (PROGRAM=dg4ifmx)
   (SID_DESC=
      (SID_NAME=tg4trai)
      (ORACLE_HOME=/pdsdev/ptmqa/oracle/product/11.2.0/db)
      (PROGRAM=dg4ifmx)
   (SID_DESC=
     (SID_NAME=db2test)
     (ORACLE_HOME=/pdsdev/ptmqa/oracle/product/11.2.0/db)
     (PROGRAM=dg4db2)
   (SID_DESC=
     (SID_NAME=as400)
     (ORACLE_HOME=/pdsdev/ptmqa/oracle/product/11.2.0/db)
     (ENV="LD_LIBRARY_PATH=/pdsdev/ptmqa/oracle/product/11.2.0/db/dg4db2/driver/lib:/pdsdev/ptmqa/oracle/product/11.2.0/db/lib)
     (PROGRAM=dg4db2)
(SID_DESC=
    (SID_NAME=MSCARD4)
    (ORACLE_HOME=/pdsdev/ptmqa/oracle/product/11.2.0/db)
    (PROGRAM=dg4odbc)
    (ENVS=LD_LIBRARY_PATH=/opt/minisoft:/pdsdev/ptmqa/oracle/product/11.2.0/db)
)Regards
Edited by: 937853 on Jul 29, 2012 2:10 AM

thanks all, I was able to solve the issue. it was indeed a port no , which caused this issue.

SCCM console does not show the link to the report manager!

SCCM console does not show the link to report manager.
Any idea?
thanks!

Hi,
The report manager URL isn't displayed in SCCM console. Why you want to display it in console?
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Bpel console is not showing the correct reply xml..

Hi,
i created a process with xsd:any i/p and xsd:any o/p. Inside the process i just assigning the(asign activity) input payload to output payload. In the console am reciving diffrent outputxml.it's removing deeplevel node as bellow.
case 1
I/P :
<BPELProcessBProcessRequest xmlns="http://iflex.com/BPELProcessB">
<a></a>
</BPELProcessBProcessRequest>
O/P
<BPELProcessBProcessResponse> </BPELProcessBProcessResponse>
case 2
I/P :
<BPELProcessBProcessRequest xmlns="http://iflex.com/BPELProcessB">
<a></a>
</BPELProcessBProcessRequest>
O/P
<BPELProcessBProcessResponse>
<a></a>
</BPELProcessBProcessResponse>
case 3:
I/P :
<BPELProcessBProcessRequest xmlns="http://iflex.com/BPELProcessB">
<aaa><a></a><a><c></c></a></aaa>
</BPELProcessBProcessRequest>
O/P
<BPELProcessBProcessResponse>
<aaa>
<a></a>
<a>

</a>
</aaa>
</BPELProcessBProcessResponse>
am using BPEL 10.1.2.
it seems as bug.is this fixed.. any batch updates ??

please check this thread for above issue. This is not formated well becoz of the xml data input. i used & lt ; and & gt ; for posting xml.. in the forum.
Bpel console & this forum is not showing the proper xml..

Installer is not showing the correct Nodes in RAC

Hi Experts,
We are in the process of upgrade oracle database from 9.2.0.3 to 9.2.0.8 in RAC. While installing the 9.2.0.8 patch set it is not showing the correct database nodes, instead of it showing production database nodes, but we are doing doing it in test machine.
Test Machine hostname:
db1
db2
Prod machine hostname
prod1
prod2
it showing the prod1 and prod2 only.
please suggest us to solve this
Note:
We copy the oracle_home from prod to test for test database cloning.
Thanks
R.Sundaravel

Then it is highly likely your RAC cluster is not correctly configured.
Open an SR at metalink as the Cluster Verify tool does not exist for your old version.

Not showing the Data in VC application

Hi I have developed the application in VC.
It is showing the data some times , it is not showing the data. Can u please let me know what is the problem.
when i checked using the Test Data service . It is showing the data. Then i have developed step by step, in between the time i use to run the application , it was showing the data. finally i have assigned to some role and user id. then also it is showing the data.
Next day after i run the application , it is not showing the data. displaying the message .
"No Data Found".
But when i run the BAPI at the back end R/3 it is giving the data properly.
Can u tell me what might be the problem
REgards
Vijay

Hi Krishna,
check the logs in the NWA. It seems that your connection is broken down sometimes, maybe a timeout. How many records does your data service return?
Check it with external debugging of the BAPI, when you can reconstruct the error.
Best Regards,
Marcel

Field Explorer in Crystal Reports does not show the same names as Bex Query

Hi
I have crystal reports, I can retrieve data from BW Bex Query. But in the field explorer it does not show the names as in the Bex query designer.
In the Bex query designer a field will have the following technical name 0Debitor and the description is Customer.
It shows in crystal reports in the field explorer twice as D[0DEBITOR]D and D[0DEBITOR]D. It also does not seperate key figures and characteristics.
I would like it to display the field explorer as shown in this blog.
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
Thanks in advance

Hi,
take a look here:
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
make sure you are using the MDX Driver and what happens is that you will see several fields per characteristic. example: one for the key, one for the description, several if modelled for the display attributes
Ingo

HT1338 i lost my iphone and my macbook pro does not show the icloud in system pref. What do i do? how do i download icloud?

I lost my iphone and my macbook pro does not show the icloud in system pref. how do i get icloud on my mac?

iCloud is only available in Lion, 10.7. You will have to upgrade to Lion in order to get into iCloud. If you transfered a .mac or .me address to iCloud through mobile me, or you have another device iCloud enabled, then you can log into the iCloud.com website.

Why this query does not show the result?

Why the query with the schema prefixed does not show the result and the query without schema display the correct results?
SQL> select data_object_id,object_type from dba_objects where object_name='HR'.'JOBS';
select data_object_id,object_type from dba_objects where object_name='HR'.'JOBS'
ERROR at line 1:
ORA-00933: SQL command not properly ended
SQL> select data_object_id,object_type from dba_objects where object_name='HR.JOBS';
no rows selected
SQL> select data_object_id, OWNER, object_type from dba_objects where object_name='JOBS';
DATA_OBJECT_ID     OWNER                          OBJECT_TYPE
69662              HR                                 TABLE
                   OE                                 SYNONYM
SQL> SELECT USER FROM DUAL;
USER
SYS

Hi,
the column object_name refers to a object_name which is 'JOBS', the column owner refers to the owner 'HR', the value isn't stored together, so you have to select the two columns. It is the same behaviour as every other table/view. Have a look at the values in the view DBA_OBJECTS.
Herald ten Dam
Superconsult.nl

Report does not show the main section while calling from forms 6i

Hi
I am running report from report from forms 6i but is does not show the data in main section, where as the data in the header section is ok.
But when i run the same report independantly from report builder it show the both header and main section with relevent data.
pl solve the matter
thanks in advance

can you tell me more about this, you might check if you are using different users when you call this report or if the user has all privileges to see all tables in this report

HT1349 I have i tunes on two computers using the same apple id but each library is not showing the same songs

I have i tunes on the computer with over 1000 songs on it and i also have loaded i tunes on my laptop as i want to get rid of the computer but the library on the laptop is not showing the same songs
how can i transfer the songs from the computer to the laptop

How to move your iTunes music to a new/different computer.
http://support.apple.com/kb/HT4527

TS1702 Updates in App Store is not showing the Apps list

After updating iOS to 6.1 in my iPhone 4s, while tapping 'Updates' in App Store, it is not showing the Apps list, though over the icon it is showing that 11 Apps has got Updates available.

hi
i've had your same proble,
you have to go on settings-->itunes&app stores-->apple ID and sign out.
after this restart your device:
Reset the iPhone by holding the sleep/wake button at the top right of the device and the home buttonat the bottom center of the face at the same time.
Hold them both until you see the screen go black. In some cases, you may need to keep holding them even after the red power off slider appears. If it does, just keep holding it.
Wait until the white Apple logo appears.
ok, now go to settings-->itunes&app stores-->apple ID and sign in again
... for me it worked
bye bye let me know if it works even for you!

My Iphone5 does not show the picture location after upgrading to ios 7.0.4 - why?

my Iphone5 does not show the picture location after upgrading to ios 7.0.4 - why?

I change Settings>Privacy>Location Services>Camera to OFF and then ON and the locations start to appear !!!!.
It seems to be Apple bug.
Thanks for you efforts

Import option is not showing the Data Source created using ODBC

Hi all,
I'm new to OBIEE, just installed OBIEE 10g in my system with the help of some reply from this Forum (thanks to Kalyan for this).
Now when I tried to create new rpd, the Import option is not showing the Data source I have created. I have created new Datasource in the SystemDSN tab of the ODBC Administrator window,I have tried this by creating the Datasource in the UserDNS tab as well.
Mine is Windows 7 Ultimate. The new data source which I have created through the ODBC Administrator window is to connect to SQL 2008 (I'm trying to get some table from SQL 2008 database), I don't have Oracle data base.
While creating the Data source ODBC Administrator is showing only two drives (SQL Server and SQL Server Native Client 10.0 ) , so I have created the Data source using the SQL Server Native Client 10.0 drive.
Can some one help me to understand the issue and to solve it.
Thanks,
Mithun

By calling your cellular data provider.

11gr1 DB console not showing the cluster instances

Similar Messages

Maybe you are looking for