[11i] Forms Perso : Updating a DFF at PO_LINES level in the PO screen
Hello
In the PO screen (POXPOEPO), I'd like to maintain some consistency between 3 dates fields at PO_LINE level, according to some business rules, with Forms Perso.
2 dates fields are the standard ones, PROMISED_DATE and NEED_BY_DATE, the third one is a DFF ATTRIBUTE1
e.g : If I modify the PROMISED_DATE, I'm using the PO_LINES.NEED_BY.NEW_ITEM_INSTANCE to modify the 2 other fields.
With an action "Property", Object Type = "Item" and PO_LINES.NEED_BY.Value = '...' or PO_LINES.ATTRIBUTE1.Value = '...'
It works for the NEED_BY_DATE field, it is correctly updated.
But the DFF ATTRIBUTE1 is cleared instead of being updated ? With the same code as the NEED_BY_DATE field
If someone has any experience in modifying DFF with Forms Perso, I would like to understand why I obtain such a behavior, and if possible have some tips about doing what I'd like to do.
Take care,
Xavier
Xavier_Vlieghe wrote:
Sorry for duplicate message, I don't know how it occurs as I just click once on "Post message" ?
This one can be deletedOriginal post -- [12.1.2] Forms Perso : Updating a DFF at PO_LINES level in the PO screen
Locking this thread.
Similar Messages
-
Hello
In the PO screen (POXPOEPO), I'd like to maintain some consistency between 3 dates fields at PO_LINE level, according to some business rules, with Forms Perso.
2 dates fields are the standard ones, PROMISED_DATE and NEED_BY_DATE, the third one is a DFF ATTRIBUTE1
e.g : If I modify the PROMISED_DATE, I'm using the PO_LINES.NEED_BY.NEW_ITEM_INSTANCE to modify the 2 other fields.
With an action "Property", Object Type = "Item" and PO_LINES.NEED_BY.Value = '...' or PO_LINES.ATTRIBUTE1.Value = '...'
It works for the NEED_BY_DATE field, it is correctly updated.
But the DFF ATTRIBUTE1 is cleared instead of being updated ? With the same code as the NEED_BY_DATE field
The DFF is defined with the value set FND_STANDARD_DATETIME, which requires to have a format DD/MM/RRRR HH24:MI:SS
If someone has any experience in modifying DFF with Forms Perso, I would like to understand why I obtain such a behavior, and if possible have some tips about doing what I'd like to do.
Take care,
Xavier
Edited by: Xavier_Vlieghe on 18 août 2011 09:41I think date formatting is involved in my problem.
Here are the date format settings in OA :
Profile option "ICX Date format" = '31/12/1999' for my user and '31-DEC-1999' at site level
My DFF ATTRIBUTE1 has a date format like this in the GUI (PO screen) : "23/09/2011 00:00:00"
But I don't know what settings is used to format this data ?
If I do a query on the data I have the following :
ATTRIBUTE1
2011/09/23 00:00:00
If PROMISED_DATE = '20/09/2011 00:00:00', and I want to add 3 days for populating the date in ATTRIBUTE1, I have tested the following :
1/ try to fit GUI date format:
PO_LINES.ATTRIBUTE1.VALUE = TO_CHAR((TO_DATE(:PO_LINES.PROMISED_DATE, 'DD/MM/RRRR HH24:MI:SS') + :GLOBAL.XX_LOAD), 'DD/MM/RRRR HH24:MI:SS')
Result in DFF : field cleared !
(same thing by replacing RRRR by YYYY)
The "Validate" button in the Forms Perso screen is yet showing a nice result, "23/09/2011 00:00:00"
2/ try to let GUI format the data:
PO_LINES.ATTRIBUTE1.VALUE = (TO_DATE(:PO_LINES.PROMISED_DATE, 'DD/MM/RRRR HH24:MI:SS') + :GLOBAL.XX_LOAD)
Result in DFF : '11/09/0023 00:00:00' (field is updated with a value now!)
(same thing by replacing RRRR by YYYY)
The "Validate" button in the Forms Perso screen is showing the result, "23-SEP-11"
I must admit I'm a little lost with this topic, if anyone has an explanation on which date format parameter is applied in the GUI (and also how to solve my problem), I would appreciate :) -
My phone lagged while trying to download the new update. It is now stuck on the loading screen that is black with the white apple. How do I fix this?
Reset the device by pressing and holding the home and power buttons for about 15-20 seconds.
-
After the most recent Thunderbolt update my 2011 iMac keeps hung in the loading screen!
After the most recent Thunderbolt update my 2011 iMac keeps hung in the loading screen! I've tried restarting it a few times without success. Any help? Thanks!
I had the same problem. Try this. Launch FaceTime. Click the toggle to turn it off; or Command-K. Quit. Do a restart, you shouldn't get the popup. You could then turn FaceTime back on if you wish. Either way, the popup should be gone from then on.
-
I Tried to update my iPhone4 & now it's dead & the apple screen is Flashing on & off until the battery runs out!
Hey RubyRunistein,
Thanks for the question. I understand you are experiencing issues with your iPhone 4. Based on the symptoms you described, it may be necessary to restore your iPhone in recovery mode:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks,
Matt M. -
itunes 10.6.1.7 keeps showing app updates available on the sidebar but when i click to get updates, the update screen says there are no updates available
Issue solved - It turns out that the QuickTime version on my PC was 6.5 and I needed to update to version 7.6 or higher to allow videos to play in iTunes. I updated to QuickTime version 7.7 and then added the old podcast folder to iTunes while in podcasts. This found all video podcast content and then the auto reorg moved all folders to the new podcast directory. For the videos I manually moved earlier, I had to move (not copy) them back to the old directory or folder then add that old folder and they were now in the right directory and viewable in iTunes.
-
MBA Update 1.0 - Buttons and text on the Welcome screen are not localized
Hi all!
I use Mac OS X 10.5.4 with French (Canada) localization on my MacBook Air, and it appears that after applying the 1.0 Update released on 2008.08.23 (which is said to resolve processor issues), the text on the Welcome screen now appears in English.
This must be related to this new update, since I did only text editing this morning and everything was OK when I started the computer for the first time.
Is it possible that the updated corrupted and/or removed the localization files, and is there a way to restore this? I hope it does not affect text elsewhere in the UI.
Note: I just done a PRAM reset and it does not solve the problem. Should I perform a SMC reset?
Thanks for your help,
Kind regards,
Yannick
Edited by ygauthier on 2008.08.23 15:51After a bit of search, I found a solution to my problem. It seems that the MacBook Air Update 1.0 indeed broke the Login window language on my system (I don't know how, but it did). This issue can be solved by using "TinkerToolSystem" from Bresink in Demo mode. This little app can restore the language upon login.
Please note that the "Enabling the root account & and change root language" did not work, for me at least. This method may not be possible anymore on Mac OS X Leopard (the tip mentions Mac OS X 10.3).
My Login Window is now back to normal
Thanks,
Yannick -
After I updated my Iphone it shuts down to the apple screen then back on by itseff
After I updated my phone to the newest version it just shuts its self down to the apple icon like the one when it is restoring then after a minute or so it goes back
I would restore from back up. Could be corrupt.
http://support.apple.com/kb/HT1414
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
Verify that you are using the latest version of iTunes before attempting to update.
Connect your device to your computer.
Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
Select the Summary tab.
Select the Restore option.
When prompted to back up your settings before restoring, select the Back Up option (see in the image below). If you have just backed up the device, it is not necessary to create another.
Select the Restore option when iTunes prompts you (as long as you've backed up, you should not have to worry about restoring your iOS device).
When the restore process has completed, the device restarts and displays the Apple logo while starting up:
After a restore, the iOS device displays the "Connect to iTunes" screen. For updating to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of iOS, keep your device connected until the "Connect to iTunes" screen goes away or you see "iPhone is activated."
The final step is to restore your device from a previous backup. -
Update to os 5.1 and now the white screen!!
hi all, I just updated to os 5.1 and now i have the white screen after 3-5 sec of the apple logo. I have tried the sleep home button pressed together but it did not help. Including when connected to the power cord. Pls help!!! thanks, a
First thing to try is a reboot of your iPad. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the iPad restart. See if that fixes your problem.
I know you said you did the Home - Sleep buttons together but did you hold it long enough to go past the red slider and on to the Apple logo? -
Itunes was updating my phone from 6.01 to 6.1 and it came up with an error. I closed the error not thinking about it and now my phone is locked up on the apple screen with the progress bar on it.
hi i tried to update my iphone 3gs from ios 4.1 to 6.1.2, while doing the same i got an error message (-5000) which i ignored an continued. it was almost about to complete while my itunes is not able to detect the iphone kindly help.
-
I tried to install an update on my phone and it went a screen that that said I had to connect to itunes, but when idid nothing happened and now I tried to restore my phone and it wont' activate
Hi
You could order the Full Retail Version of OS X (Black DVD with a silver X on it). Regarding always starting up in Open Firmware, in this thread a bloke had the same problem until he disconnected his peripherals before restarting. See if the entire thread helps:
http://www.macworld.com/forums/ubbthreads/showflat.php?Cat=&Board=UBB13&Number=2 43591&Main=243591
Steve -
I downloaded Firefox Setup 8.0.1.exe from the website to my desktop and opened it as an administrator. The available choice (once opened) was to upgrade. When the process was complete my version of Firefox was identified as 8.0.1 but the main screen still said - "You're not on the latest version of Firefox. Upgrade today to get the best of the Web!"
This - http://www.google.com/firefox - is the old Firefox Start Page used by the Firefox 3.6 and earlier versions of Firefox, I don't think it is being maintained.
Starting with the Firefox 4 version, Firefox is using a "local" Start Page with the address of '''about:home'''. It looks similar to the old Start Page, but it isn't exactly the same. -
After update, Podcast Title and Description takes over the entire screen
Can't they set the app to cut off after a certain amount of characters like the old app was?
I presume you are runnning iTunes on either an OS X 10.7 or OS X 10.8 system. Move the cursor to the very top of the screen so that the menu bar appears, then click the blue box with the arrows at the very right corner of the menu bar, or press Shift-Command-F. That will switch iTunes back to a normal window, which it should then remember for future launches.
Regards. -
As the title states, browsing music while playing it on the lock screen has really slowed down, while it used to zap to another song quite instantly it now takes about one, sometimes two seconds to do so. Did iOS 5 cause this? Will it be fixed? Any other explenations?
I rarely record automation, and when I do I never do a second pass (usually hand draw automation in) but I have had problems with Logic 7 no longer playing back automation. I've been told its fixed in Logic 8, but in the mean time here is a work around.
Select the region where the automation is (if there is no region, create one using the pencil tool and expand it to cover all automation) and go OPTIONS menu -> TRACK AUTOMATION -> "Move current track data to region data." Now everything should play back as expected. If you want to edit the data, simply select "move current region data to track data" and edit away.
For some reason, Logic 7 will sometimes stop reading track automation data, but I have yet to have it stop reading region automation. This is a bug, and according to other users, has been fixed in Logic 8. Hope this helps until we eventually upgrade -
Updating Ekpo by adding item level Screen Exit
Hi,
I added 2 fields at the item level of the ME21N Screen using the following screen exit.
( SAPMM06E 0111 CUSTSCR1 SAPLXM06 0111 Subscreen: PO item. )
Now I just want to update EKPO table.,. How to proceed. any body know guide me.
Thanks & Regards.
Balajee.JHi Mou,
In this there are four methods
1)ACTIVATE_TAB_PAGE
2)TRANSFER_DATA_TO_SUBSCREEN
3)TRANSFER_DATA_FROM_SUBSCREEN
4)PASS_FCODE_TO_SUBSCREEN
In thw first method pass the tabname,screen no,position all.
fcaption = 'C Form Details'.
fprogram = 'Z_VLO1N_HEAD'.
fdynpro = '0200'. This is the screen created and kept all custom fields
Here you the concept set and get data and move and get the values.
TRANSFER_DATA_TO_SUBSCREEN
set PARAMETER ID 'Z' FIELD f_vbrk-ZCF.
TRANSFER_DATA_FROM_SUBSCREEN
get PARAMETER ID 'Z' FIELD fvbrk-ZCF.
Pass all these parameters it will resolve your issue.Check and post if need help.
Regards,
Madhu.
Maybe you are looking for
-
when I send a text message it shows up as coming from my email address not my phone, can i change this
-
Living in Brazil but with a Swiss account
I am currently in Brazil for 3 months and would like to download local apps. However my app store account continues registered in Switzerland (swiss cc). How do I get access to local apps (i.e. taxi, restaurants)?
-
How can i get the directory of some files?
I have the following class and the directory images in the same folder as this class. the problem is that i don't see the icons and i don't know how it works. please help. thanx a lot public class MyIcons { private final static String images = "image
-
Support document for Migration of application fro flex 2 o flex 3
Support document for Migration of application fro flex 2 to flex 3
-
How to get a SQL-String from a (Prepared)Statement?
Hi, I have these three lines of code: PreparedStatement stmt = connection.prepareStatement("select * from mytable where username= ?"); stmt.setString(1, "user"); ResultSet rs = stmt.executeQuery(); Now, I want to log all SQL-Statements with log4J. lo