11i Rapid Clone Not Certified With 10g/11g RAC???

Metalink document 230672.1, "Cloning Oracle Applications Release 11i with Rapid Clone" was updated Feb. 2009 with the following:
February 04, 2009
- Added 11i/10g/11g RAC clarification on Section 4 Steps 6 and 7.
- Corrected incorrect format statements.
The clarification?
Attention: The following steps apply only for 9i RAC Clusters. Rapid Clone is not certified for Cloning 11i with 10g or 11g RAC Systems at this time.
10g RAC support for EBS has existed for quite a while, what's up with this? I'm in the middle of upgrading my 11i EBS on 9i RAC environments to 10gR2 RAC.
Anyone cloning 11i with 10g/11g RAC? How are you doing it?
Disgusted,
Jerry

Take a look Doc ID: 230672.1 on Metalink Section 6 talks about Cloning a RAC system
If you're trying to search for anything on EBS look for Applications 11i, because most docs refer to it as Applications 11i more often then EBS.
Cloning Oracle Applications Release 11i
with Rapid Clone

Similar Messages

Is OEM 10.2.0.5 and OIM 10.1.4.2 certified with SOA 11g

Hi,
Can you tell me whether OEM 10.2.0.5 and OIM 10.1.4.2 is certified with SOA 11.1.1.x, if not do we need to install/upgrade OEM and OIM to 11.1.1.x
Please refer me some Metalink Note id's if you have....
Cheers,
Patel

Hi,
I got the answer,
1. OEM 10.2.0.5 is not being certified with SOA 11g, but OEM 11g has been certiified with SOA 11g.....Reference Metalink Note: 412431.1
2. OIM 10.1.4.2 is being certified with SOA 11g..... Reference: http://www.oracle.com/technology/software/products/ias/files/idm_certification_101401.html#BABHDAEG
Cheers,
Patel

Forms 6i is not connecting with Oracle 11g database?

Forms 6i is not connecting with Oracle 11g database?
How to resolve this issue?

Hi,
Once you installed the Forms and Reports, you need to configure the paramters like tnsnames.ora in you path.
There will be one folder in the Installation path of Forms and Reports search for tnsnames.ora file..and you need to Updated the file as per the which ORACLE Server you are connecting and then try.. it..
Default path for forms will be "ORACLE_HOME/net80/admin".. search for tnsnames.ora and modify it..
- Pavan Kumar N

Is Forms 10g certified with Database 11g?

Hi:
Does anybody know if Forms 10G is certified with Oracle Database 11g?
Regards
Ricardo

This should help Certification of Forms 10G against database 11G

Form6i not working with 10g

i have oracle 10g server and and i just installed form 6i
and i can't log-in ora10g from form6i.
is form 6i incompatible with 10g?
thanks..
note:i have done all the settings.

It does work ok, Forms 6i to Oracle DBS 10g
Tell us more about your configuration?
Tony

"Next" and "Previous" functionality on UIX tables not working with 10g

With new release of JDeveloper(10G), the "Next" and "Previous" navigation buttons/links on UIX tables are not working. I tried different approaches:
1. It does not work with Data Controls built from Java Beans or from TopLink.
2. I tried without using Data Controls and it still does not work.
I shows "Next" and "Previous" buttons on the page. But it shows all records on the page rather then showing limited records. Say for example if the block size is 5 and total number of records are 15, it shows all 15 records in the table but the "next" and "Previouds" button would say "1-5 of 15".
Did any of you observe the same behaviour?

Hi Shital -
Thanks for the additional info...
When I said that the total number of records is 15, I
meant that my tableData's DataObjectList contains 15
entries. (In case of DataControls you don't even use
DataObjectList, but for my non data control
applications I used DataObjectList). You are saying
that If I want to display only 5 records per page
then I will need to provide a DataObjectList with
five items. Then for next five records from 6-10 I
will have to program in such a way that my method
call returns 6-10 records.That's correct. In the case where you are explicitly providing data to the table via a DataObjectList, you need to feed the data to the table in page size blocks - and you also need to handle the table's goto event to scroll the table to the next/previous block of data.
In previous version of
UIX(2.1.7) I never had to program for next and
previous buttons. UIX tables used to take care of
that. That's why I am so surprised.It sounds like you must have been using the <bc4j:table> component. Is that the case?
Getting back to your original issue...
1. It does not work with Data Controls built
from Java Beans or from TopLink.I believe that this is a bug in the preview release - and I'm fairly sure this will be addressed by production. In production, ADF should automatically handle wiring up table scrolling for you when binding your table to a data control - whether the data control is implemented via JavaBeans, Toplink, or BC4J. I believe that in the preview release, scrolling only working when binding to a BC4J data control.
Andy

Experiences with Oracle 10g/11g RAC on VMWare Fusion for Macbook and OEL 5

Folks,
I recently purchased a new Macbook Pro laptop computer to use for demos and testing with Oracle RAC. I am using VMWare Fusion for Mac OS X to setup new VM machines with Oracle 11g.
Thus far, I can setup single instance Oracle 11g database fine with OEL 5 (32 bit OS) as the guest OS. The problem that I keep running into due to the limitation with VMWare Fusion product is that I am not able to edit the VMWare network settings to allow multiple VM machines to communicate with each other. The second main issue that I currently face is that VMWare Fusion does not allow you to setup shared disks which are a requirement to install and configure an Oracle RAC environment. I came to the realization that after searching forums online that
one must setup a third VM machine to act as an NFS or iSCSI filer system to present to the other VM hosts for the shared storage requirement for RAC. Has anyone been able to do all
of this successfully with VMWare Fusion on a Macbook ? If so, I would definitely be interested in finding out how you did this. Specifically the following:
1. Network configuration for each VMWare Fusion guest OS machine
2. Shared storage ie) NFS or OpenFiler VM machine
Regards,
Ben

Hi,
I'm facing the same issue.. If your issue is fixed..could you please let me know?
I'm trying to configure 11g RAC with OPenfiler and got stuck here.
Regards,
Kumar

Open 10g/11g RAC database in Non RAC Mode

Dear Friends,
How i open 10g and 11g RAC database in Non RAC Mode (open single instance in order to perform upgrade)
Later i will convert the upgraded DB to RAC DB
Regards,
DB

user564706 wrote:
Dear Friends,
How i open 10g and 11g RAC database in Non RAC Mode (open single instance in order to perform upgrade)
Later i will convert the upgraded DB to RAC DB
Regards,
DBEdit spfile and set cluster_database=false before starting database in upgrade mode(optionally you can unset other cluster parameters).
So you upgrade using only 1 instance of database.
Once the upgrade is finished start the other instance as well and set cluster_database=true
Also see preupgrade process - http://docs.oracle.com/cd/E11882_01/server.112/e23633/upgrade.htm#i1011979
Post upgrade -> http://docs.oracle.com/cd/E11882_01/server.112/e23633/afterup.htm#CEGCFJJC

ODBC and OCI not working with OBIEE 11g Client on 64 bit machine

Hi,
I have Installed OBIEE 11g client (Admin tool) on Windows XP Professional 64 bit machine.. I have Installed 11g database on the same machine but while importing Metadata using admin tool. getting "Connection has failed" error message... Can someone tell me whats the issue..
ODBC and OCI works fine with OBIEE 10g Admin..

Hi,
Oracle_BI1\network\admin folder gets installed with full obiee 11g Installlation and I have installed only 11g client as I have OBIEE 10g already Installed on my machine..
Installation is as follows:
ORACLE 11g CLIENT Installation is as follows:
C:\Program Files\Oracle Business Intelligence Enterprise Edition Plus Client
ORACLE 10g Installation is as follows:
C Drive:
ORACLE BI
ORACLE BI Data ( everything is working with this)
latest Log Info is as follows:
[2012-02-02T11:05:00.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: ] [tid: 24fc] [nQSError: 16001] ODBC error state: 08004 code: 12154 message: [Oracle][ODBC][Ora]ORA-12154: TNS:could not resolve the connect identifier specified.
[2012-02-02T11:05:16.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: ] [tid: 2f3c] [nQSError: 16001] ODBC error state: 08004 code: 12154 message: [Oracle][ODBC][Ora]ORA-12154: TNS:could not resolve the connect identifier specified.
[2012-02-02T11:32:53.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: ] [tid: 2f3c] [nQSError: 16001] ODBC error state: 08004 code: 12154 message: [Oracle][ODBC][Ora]ORA-12154: TNS:could not resolve the connect identifier specified.

ODBC Connection Pooling not working with 10g On Windows 2003

I have a bog standard Windows 2003 machine and installed Oracle 10g on it. It seems that the ODBC Connection pooling is not working.
I am using ASP and every time I try and render a simple page it is taking 4-5 seconds which is the time necessaru to create a database connection. ( Machine is 2.8 Ghz Xeon with 2 gigs of Ram)
The following VB Code can be used to test that the pooling is not working. It creates 2 connections to the database. On oracle 10g on windows 2003, it takes 5 seconds to create the first connection, and another 5 seconds to create the second connection.
When you run the same program on windows 2000 and oracle 9, the first connection take 3 seconds, and the second 0.05 seconds. ( The shorter time being due to the connection pooling)
time1=timer()
set conn=createobject("adodb.connection")
Conn.Open "dsn=oracleDSN;uid=yourusername;pwd=yourpassword"
time2=timer()
msgbox time2-time1
conn.close
set conn=nothing
time1=timer()
set conn=createobject("adodb.connection")
Conn.Open "dsn=oracleDSN;uid=yourusername;pwd=yourpassword"
time2=timer()
msgbox time2-time1
conn.close

ODBC Connection Pooling is controlled by the ODBC Driver Manager and defaults to off for every driver on every platform. Have you enabled connection pooling for your driver in the ODBC Data Source Administrator?
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

11i rapid clone - added a datafile to prod and forgot to run adpreclone

I forgot to run adpreclone in my Prod environment before I did a recover of Prod to Dev.
Now my adcfgclone steps fails and I assume it is because my control file is incorrect.
If I check the log one of the errors is:
ORA-01119: error in creating database file
'/app/orafin/xxxx/xxxdb/10.2.0/dbs/MISSING00430'
So I don't know if I can easily fix this or if I will need to run adpreclone and then do a backup/restore to work around this issue.

Hi,
So I don't know if I can easily fix this or if I will need to run adpreclone and then do a backup/restore to work around this issue.You need to run preclone again on the source node, and copy the files.
As a workaround, you may edit adcrdb.zip file and add this new file -- See (Troubleshooting RapidClone issues with Oracle Applications 11i [ID 364565.1]) for details.
Thanks,
Hussein

UIX 2.1.7 version project not working with 10G Preview

Hello,
We have an application built using JDeveloper9.03 and UIX2.1.7. I tried to open the same application using JDeveloper10G and I could not open any of the UIX files. Even the migration fails. Any ideas about how to open and work on my UIX2.1.7 files with JDeveloper10g?
Thanks.

Hi Jeanne,
Thanks for your reply.
It did prompt me to update the installables. And I said yes. But it failed to update the installables and threw a null pointer exception. When I tried to open my file, I can't even see the UIX code (the xml code). It only shows a gray screen.
Thanks.

ClassSpy extension SDK sample does not work with JDev 11g

I downloaded and unzipped JDev 11g.
downloaded the ESDK samples via check updates.
Installed samples and deployed them.
When I UI debug classSpy sample , selecting jdev/bin/jdev.conf as a default run target , I get the following error.
java.lang.IllegalStateException: Unable to create an InitialContext.
The complete log of the UI debug window is as below.
D:\Official\JDEV11G\jdk\bin\javaw.exe -client -Xdebug -Xrunjdwp:transport=dt_socket,server=y,address=2174 -Dhttp.proxyHost=emeacache.uk.oracle.com -Dhttp.proxyPort=80 -Dhttp.nonProxyHosts=null -Dhttps.proxyHost=emeacache.uk.oracle.com -Dhttps.proxyPort=80 -Dhttps.nonProxyHosts=null -Xmx512M -Xverify:none -XX:JavaPriority10_To_OSPriority=10 -XX:JavaPriority9_To_OSPriority=9 -XX:MaxPermSize=160M -Xbootclasspath/p:../lib/lwawt.jar -Dide.config_pathname=D:\Official\JDEV11G\jdev\bin\jdev.conf -Djava.class.path=..\..\ide\lib\ide-boot.jar;D:\Official\JDEV11G\jdev\lib\jdev-remote.jar -Dlaunched.from.jdev=true oracle.jdevimpl.runner.uidebug.debuggee.Debuggee -silent oracle.ide.boot.Launcher
Listening for transport dt_socket at address: 2174
Debugger connected to local process.
Processing 276 classes that have already been prepared...
Finished processing prepared classes.
Exception breakpoint occurred at line 145 of EventDispatchThread.java.
java.lang.IllegalStateException: Unable to create an InitialContext.

You better try JDeveloper and OC4J 11g Technology Preview
Timo

ALBPM 5.7 BPM process admin issues with Oracle 11g RAC as directory service

Hi,
Setup ALBPM 5.7 enterprise for weblogic.
BPM Engine deployed on weblogic cluster.
BPM process admin (web console) deployed on tomcat.
BPM process admin uses WEB-INF/directory.properties for directory configuration.
things were fine with oracle SID,
directory.default.url=oracle://<db_host>:1521/schema=diruser,sid=BPMDB { with this, login to process admin was working fine}
But clueless, on how to configure RAC as the directory service in the above directory.properties file. Since this is a old version, no directory.xml in the installation.
Connection string:
(DESCRIPTION =
(LOAD_BALANCE = on)
(FAILOVER = on)
(ADDRESS = (PROTOCOL = TCP)(HOST = DB_HOST1)(PORT=1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = DB_HOST2)(PORT=1521))
(CONNECT_DATA =
(SERVICE_NAME = BPMDB)
(FAILOVER_MODE =
(TYPE = SELECT)
(METHOD = BASIC)
Please help how to use service name (above connection string) in directory.properties, to be able to login to process admin successfully.
Thanks in advance,
Swamy

Using admin center, able to get the string to be used in directory.properties.
FYI, the string looks like below,
directory.default.url=oracle://customURL:0/schema=bpmdirectory,customURL=jdbc:oracle:thin:@(DESCRIPTION = (LOAD_BALANCE = on)(FAILOVER = on)(ADDRESS = (PROTOCOL = TCP)(HOST = DB_HOST1)(PORT=1521))(ADDRESS = (PROTOCOL = TCP)(HOST = DB_HOST2)(PORT=1521)) (CONNECT_DATA = (SERVICE_NAME = BPMDB.DOMAIN.COM) (FAILOVER_MODE = (TYPE = SELECT) (METHOD = BASIC))))

SQL Developer 3.0.04 generated scripts not compatible with Oracle 10g (XE)

HI,
I tried to do an export from one XE database (still 10g) to another XE database. (also 10g).
I tried to do a database copy as well as a separate export and import (by loading the file and running as a script).
Neither of them work without modifying the files as it seems that SQL Developer generates scripts that are only compatible with Oracle 11g.
- Create table contains "segment creation automatic"
- Storage clauses contain parts that are not compatible with 10g
I ran through the wizard several times but neither can I find an option to choose for compatibility with earlier versions of Oracle.
Checked the preferences screen as well.
Is this a well hidden option or is it not possible to make this work for 10g.
Extra : found workaround by removing the storage clause to the export. Is there another way that does not force me to remove the storage clause?
Edited by: kcaluwae on 24-jun-2011 6:03

I'm sure this is far from the supported way to fix this but, seeing that it's apparently an issue with the classpath or something in it, I hacked <sqldeveloper_install>\sqldeveloper\bin\sqldeveloper.bat and added [ORACLE_HOME]\jdbc\lib\ojdbc6.jar to the classpath. At least that gets me started with 3.0 and lets me create TNS connections.
I'd really appreciate a better solution, if any of you kind folks knows of something.
Thanks,
Kelly

11i Rapid Clone Not Certified With 10g/11g RAC???

Similar Messages

Maybe you are looking for