120 versus 240hz versus HD and other technical questions

We do not and will not TV cable. But we do watch movies via DVD. We do want to upgrade to Blue Ray. LED / 3D are out of price range so it's going to be an LCD.We already know we want 1080.
Can anyone tell me what I should be looking for in a new TV? There a lots of technical data.
What are the benefits for 120 vs 240 vs 600Hz? Do we need speed for movies?Plasmas have faster refresh rate but they are a dying breed it appears. Shouldwe consider a plasma?
We have a box for the Wii connection. Do we need more than 2 HDMI connections?
Thanks for any help you can provide.
Dan
Solved!
Go to Solution.

Basically - Most DVD/Blu-Ray content is 24 frames per second. The only benefit of 120 Hz over 60 for non-3D is that 24 divides evenly into 120, but no 60, so can cause slight motion judder artifacts when displaying 24 fps content on a 60 Hz display. Most people won't notice this even in a side-by-side test. 3D basically doubles framerate requirements - so slight benefit of 240 over 120 for 3D (48 doesn't divide evenly into 120), but no benefit of 240 over 120 for non-3D.
There is no content in existence with framerates over 60 Hz.
*disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies.

Similar Messages

Adding a RAID card to help speed up export (and other drive question) in Premiere Pro CC

First of all, I have read Tweakers Page exporting section because that is where my primary concern is. First my questions, then background and my current and proposed configurations:
Question 1: Will adding a hardware RAID controller, such as an LSI MegaRAID remove enough burden from the CPU managing parity on my software RAID 5 that the CPU will jump for joy and export faster?
Question 2: If true to above, then compare thoughts on adding more smaller SSDs for either a one volume RAID 0 or smaller two volume RAID 0 to complement existing HDD RAID 5. That is, I'm thinking of buying four Samsung 850 Pro 128 GB SSDs to put in a four disk volume to handle everything (media/projects, media cache, previews, exports), or split it up into two volumes of two disks each and split the duties, or keep the four disk volume idea and put the previews & exports on my HDD RAID 5 array.
The 850's are rated at SEQ read/write: 550/470 MB/s thus I could get around 2000/1500 MB/s read write in a four disk RAID 0 or 1/2 that if I split into two volumes to minimize volumes from reading/writing at the same time, if that really matters with these SSDs?
The Tweaker's page made a few comments. One is splitting duties among different disks, rather than a large efficient RAID may actually slow things down. Since the SSDs are much faster than a single HDD, I'm thinking that is no longer accurate, thus I'm leaning toward the Four disk configuration putting OS & Programs on C drive, Media & Projects on D (HDD RAID 5), Pagefile & Media Cache on SSD (2-disk RAID 0) and Previews &Exports on 2nd SSD RAID 0 (or combine the two RAID 0's and their duties).
Just trying to get a perspective here, since I haven't purchased anything yet. Any experience/stories, I would appreciate.
My current drive configuration:
My D drive is software RAID 5 consisting of four 1 TB Western Digital RE4 (RED) 7200 RPM HDDs with a CrystalDiskMark SEQ Read/Write of 339/252 MB/s.
The C drive is SSD 500 GB (Samsung 840 (not Pro) and does 531/330 MB/s. My OS, Program Files and Page File are on C, and data/media files/project, etc all are on the RAID drive.
Problem:
Current setup allows for smooth editing, only the exporting seems slow, often taking between two and two and a half times the video length to export. Thus a 10 minute video takes 20-30 minutes to export. 15 minute video can take 30-40 minutes to export. The first 10% of the two-pass export takes under a minute (seems fast), but it gets slower where the final 10 or 20% can hang for many minutes like my system is running out of steam. So where is the waste?
I have enabled hardware acceleration (did the GPU hack since my GPU isn't listed) and it may spike at 25% usage a few times and eat up 600 MB of VRAM (I have 2 GB of VRAM), otherwise it is idle the whole export. The CPU may spike at 50% but it doesn't seem overly busy either.
Our timeline is simple with two video streams and two audio streams (a little music and mostly voice) with simple transitions (jump cuts or cross dissolves). We sometimes fast color correct, so that might use the GPU? Also, since we film in 1080 60P and export 1080 29.97 frames/sec, I think that is scaling and uses the GPU. I know without the GPU, it does take a lot longer. I have ruled out buying a faster GPU since it doesn't appear to be breaking a sweat. I just need to know if my system is bottlenecked at the hard drive level because I'm using software RAID and my disks are slow and will hardware RAID significantly reduce the CPU load so it can export faster.
Our files are not huge in nature. Most our clips are several MBs each. Total project files are between 5 GBs and 10 GBs for each video with Windows Media File export being 500 MB to 1.2 GB on average. We shoot using Panasonic camcorders so the original files are AVCHD, I believe (.MTS files?).
Considerations:
1. I'm thinking of buying (and future proofing) an LSI Logic MegaRAID 9361-8i that is 12Gb/s SAS and SATA (because some current SSDs can exceed the 6Gb/s standard).
2. I'm not replacing my current RAID 5 HDDs because not in my budget to upgrade to 6 or more large SSDs. These drives are more important to me for temporary storage because I remove the files once backed up. I don't mind a few inexpensive smaller SSDs if they can make a significant difference for editing and exporting.
I can only guess my HDD RAID is slow but the CPU is burdened with parity. I would imagine running RAID 10 would not help much.
My setup:
my setup:
CPU - i7-3930K CPU @4.5 GHz
RAM - G.SKILL Ripjaws Z Series 32GB (4 x 8GB) DDR3 2133 @2000
Motherboard - ASUS P9X79 WS LGA 2011
GPU - Gigabyte GeForce GTX 660 OC 2GB (performed the compatibility list hack to enable hardware acceleration).
C drive - 500 GB Samsung 840 SSD (Windows 7 Pro 64 bit and programs).
D drive - four 1 TB WD RE4 Enterprise HDDs 7200 RPMs in software RAID 5
Case - Cooler Master HAF X
CPU Fan - Cooler Master Hyper 212 EVO with 120 mm fan
Power Supply - Corsair Pro Series AX 850 Watt 80 Plus Gold
Optical Drive - Pioneer BDR - 208DBK
thanks in advance,
Eric

........software RAID 5 off the motherboard ??????......NOT a good idea, from what I have read here on this forum from experts like Harm Millard and others. They have mentioned a LARGE overhead on the CPU doing this....causing sub-par performance. RAID 0 off the motherboard will NOT do this, however.....RAID 0 would provide optimum speed, but, with the risk of total data loss if ANY drive fails. You may wish to reconfigure your RAID to be RAID 0...BUT...you would need to DILIGENTLY back up its entire volume onto perhaps a quality 4TB drive very frequently.
A lot depends on the nature of your current and FUTURE codecs you plan to edit. You may not want to sink a lot of money into an older setup that may have trouble with more demanding future codecs. For now, in the 1080p realm, your rig should be OK....the read/write performance on your CURRENT RAID 5 setup is not great, and a definite drag on the performance. The rest of your components appear to be fine.....the Samsung SSD, though not ideal, is OK.....it's write speed is WAY lower than the Pro model,but, the drive is used mainly for reading operations. Since you have Windows 7 Pro, and NOT Windows 8.......you CAN put the entire windows page file onto the RAID 0 you might create.....this will take that frequent read/write load OFF the SSD. Read the "tweakers Page" to see how to best TUNE your machine. To use your current setup most efficiently, without investing much money, you would :a. create the RAID 0 off the motherboard, ( putting all media and project files on it ) b. install a quality 7200rpm 4TB HDD to serve as a BACKUP of the RAID array. Then, install a Crucial M550 256GB or larger SSD, ( close in performance to Samsung 850 Pro...much cheaper), to put all previews, cache , and media cache files on....AND to use as " global performance cache" for After Effects...if you use that program. Exporting can be done to ANOTHER Crucial M550 for best speed...or, just to the either the FIRST Crucial or, the 4TB drive. Your current GPU will accelerate exports on any video containing scaling and any GPU accelerated effects. Your CPU is STILL important in SERVING the data to and from the GPU AND for decoding and encoding non-GPU handled video....your high CPU clock speed helps performance there ! You may want to check out possibly overclocking your video card, using MSI Afterburner.or, similar free program. Increasing the "memory clock speed" can RAISE performance and cut export times on GPU effects loaded timelines,or, scaling operations. On my laptop, I export 25% faster doing this. With my NEW i7 4700 HQ laptop, I export in the range of your CURRENT machine....about 2 to 3 times the length of the original video. PROPERLY SET UP...your desktop machine should BLOW THIS AWAY !!
Visit the PPBM7 website and test your current setup to possibly identify current bottlenecks,or, performance issues. THEN, RE-TEST it again, after making improvements to your machine to see how it does. Be aware that new codecs are coming (H.265 and HEVC,etc.) which may demand more computer horsepower to edit, as they are even MORE compressed and engineered for "streaming" high quality at a lower bandwidth on the internet. The new Haswell E...with its quad-channel memory, 8 core option, large number of PCI gen. 3 lanes, goes farther in being prepared for 4K and more. Testing by Eric Bowen has shown the newer PPro versions provide MUCH better processing of 4K than older versions.

Leopard, gcc 3.3 and other bizarre questions...

Hi all.
I'm currently trying to install amarok music player onto Mac OS X 10.5.2,
I've already done so on an identical hardware configuration, under Mac OS X 10.4.x, and after a few compiling errors, and unmet dependencies, managed pretty well I thought.
This time my problem(s) is(are) different.
I've user what the amarok wiki ( http://amarok.kde.org/wiki/OnOSX ) describes as the "Amarok via Fink in complete" method, which is to say install fink, hit fink install amarok, and hope for the best... Having pushed through a few bits and pieces here and there, amarok is now compiled and installed.
But I get this strange error message when launching amarok, which then subsequently and very rapidly crashes :
[start code]
dyld: lazy symbol binding failed: Symbol not found: dscaler_greedyh_getmethod
Referenced from: /sw/lib/xine/plugins/1.1.10/post/xineplugposttvtime.0.0.0.so
Expected in: dynamic lookup
dyld: Symbol not found: dscaler_greedyh_getmethod
Referenced from: /sw/lib/xine/plugins/1.1.10/post/xineplugposttvtime.0.0.0.so
Expected in: dynamic lookup
[end code]
(I don't think the entire amarok debug output is relevant, it's just version 1.4.8 and the rest seems pretty standard to me, do please ask if you want the full gdb output though)
After looking up the dyld errors I found this :
http://naranja.umh.es/~atg/blog/archives/2007/01/entry_0.html
(quite old I know, but sound and the closest I found to my error)
which lead me to believe I should have compiled amarok, and for that matter libxine1 (which I compiled myself with the --with-external-ffmpeg flag because fink wouldn't do so...), with gcc set to version 3.3 (should I?)
I then discovered that gcc_select didn't exist in Mac OS X 10.5, nicked it of a 10.4, removed and tweaked it until everything worked fine on the 10.5 with gcc 3.3 (I compiled a test.c with no problem), and tried again... with no luck. I couldn't get xine, nor amarok to compile.
So my questions are these (after that lengthly introduction, bear with me please :
-firstly (or miraculously...) does anyone recognize or understand those errors amarok is giving out?
-secondly can someone please explain the situation with Mac OS X 10.5 and gcc versions <=4.0 'cos I'm really out of the picture here ?!
Thanks a lot in advance for any help, and sorry for the long post, I figure it's always best for folks to have an overall picture of things...
Kind regards,
Mark.
Message was edited by: Marcool

I quote :
Re: Mac OS X 10.5 ? gcc 3.3 ? and other strange happenings
From: Benjamin Reed ([email protected])
Sent: Mon 24/03/08 15:51
To: Mark COLLINS ([email protected])
On Mon, Mar 24, 2008 at 6:01 AM, Mark COLLINS <[email protected]> wrote:
start code
dyld: lazy symbol binding failed: Symbol not found:
dscaler_greedyh_getmethod
Referenced from:
/sw/lib/xine/plugins/1.1.10/post/xineplugposttvtime.0.0.0.so
Expected in: dynamic lookup
dyld: Symbol not found: dscaler_greedyh_getmethod
Referenced from:
/sw/lib/xine/plugins/1.1.10/post/xineplugposttvtime.0.0.0.so
Expected in: dynamic lookup
end code
I'm sorry, I can't really help with xine issues, you'll have to
contact the xine maintainer.
As for getting amarok 1.4.x, if you want 1.4.8, I've already got
amarok 1.4.8 in fink unstable, your best bet is to not try to build it
by hand, and instead get it there...
-firstly (or miraculously...) do you recognize or understand those errors
amarok is giving out?
I recognize them as an issue with xine, but I don't know where the
errors come from.
-secondly can you explain the situation with Mac OS X 10.5 and gcc versions
<=4.0 'cos I'm really out of the picture here ?!</div>
gcc 3.3 does not exist on any of the intel platforms, except for
compiling backwards-compatible powerpc code. The first apple gcc that
supports x86 Mac OS X is gcc 4.0. You can't gcc_select it, if there
is something that supposedly requires 3.3, it won't work on 10.4 or
10.5, on an intel box, except building a complete powerpc application
and running it under rosetta.
Benjamin Reed a.k.a. Ranger Rick
Fink, KDE, and Mac OS X development
http://www.racoonfink.com/
So thanks a lot Benjamin, that solves that, no way to run gcc 3.3 on Intel Mac OS X 10.5, and the errors I'm encountering are from xine.
I guess I'll be chasing up the xine maintainer now!
Thanks all for you help guys, and see ya' !
Regards,
Mark.

How does Smartware handle backing up two drives to My Cloud...and other Smartware questions

When you set up backup from two disk drives on one PC to My Cloud via Smartware, do they both backup simultaneously, or do I need to do one, then the other? I have a Windows 8.1 laptop with two hard drives, one is 500GB, the other 1 TB. After installing My Cloud (3TB) and Smartware, I went into Smartware and set up my backups. I selected various folders on each drive to back up, and I also set up two different folders on My Cloud to receive these files. Setup is like this: PC Drive -> My Cloud FolderSeveral folders in G: drive -> Pictures, Video folder on My CloudDesktop and User folder onmain drive -> Users folder on My Cloud Every time I open my PC at home, I start Smartware, click the Backup tab and let the backup continue. I feel like I need to manually go into the Home and Backup tab for each backup plan (one per drive) and restart it. Regardless, my question is this: is Smartware able to handle these two drives on my laptop backing up onto My CLoud? Other Smartware questions:- Does my PC have to be on my home network (where My Cloud is installed) in order to run Smartware? Can I be on the internet outside of my home and run Smartware?- I run Outlook 2010. Will Smartware back up the latest Outlook file automatically as new files are created (basically, every time I run Outlook)? Much appreciated. - Paul M.

Hello,
When you set up backup from two disk drives on one PC to My Cloud via Smartware, do they both backup simultaneously, or do I need to do one, then the other?
You will need to do one first and then the other and the last one that is selected will be done automatically.
- Does my PC have to be on my home network (where My Cloud is installed) in order to run Smartware?
Yes.
Can I be on the internet outside of my home and run Smartware?
WD Smartware does not perform remote backups.

Posible p4n diamond heat problem and other beep question

Hi was using my p4n diamond for about 2h 30min and it all of a sudden just cuts out with no warning.
im unsure if its heat related thought the constant 55C is not as good temp as i should probably have but it stays stable there.
Also when i recently installed msi core it said i was very close to the voltages it had in the display just to hope to rule out power problems.
i have the cases 120mm exaust fan in the back an 80mm input fan in thefront and then the cpu fan that came with my pentium d 830 .
if its heat related should i get another 80mm fan as an exaust or an 80 mm input fan. i have one more spot on the door of the case.
----other beep question--
I was also wondering about the beeps on my computer. when i first was working with this pcc i had no beeps but then when working i had one beep before os then two after os and usb case plugs and floppy , 3 when i put on a printer and then back to one and then no beeps.
are these my beeps going down related to my heat or is this mother board short lived . one beeps soposed to mean that its loading properly
thanks

regarding your question about target temperature. my board isn't exactly the same as yours, but it's close.
you are right that you can lower the target temp and it will tend to cool the cpu because the fan runs faster at a lower temperature. the way i set up mine was to DISABLE the target temp and that gives the fan full voltage at all temps. that way, the fan rpm will bottom out at 2250rpm (instead of 1100rpm up to the target temp) or so even at lower temps.
also keep in mind that your cpu temp in the bios disply should be a few degrees HIGHER than the temp in "idle windows".
the intel data sheet for the pentium D 8xx series says that the max temp is 69C. so your cpu shouldnt have a problem at 55C.
i ran a prime95 primality test for about 17 hours at 60C to test stability (while using the computer for my normal foreground tasks) and didn't have a problem. i'm NOT recommending this. but i wanted you to know that this cpu doesn't have a problem with temps in the 60C range. and that msi motherboard will stand up to rough treatment.
also, in my humble opinion, i would NEVER run those msi windows utilities. they may be causing you a problem with stability. i use speedfan from almico to monitor temps and i have it set up to generate sound and visual warnings at certain temps. the F1 docs are good. if it were my system, i would go so far as to reinstall windows and format the C: to get rid of core center. i wouldn't even trust the uninstall unless you're good enough to surgically remove it manually.
also make sure you turn off EIST in the bios. it wont impact your temps significantly. that nvidia nforce sli intel edition has a problem with 14x multiplier and pentiumD. and EIST bumps you down to 14x occaisionally.

SFDM Tool (Shop Floor Dispatching and Monitoring), Technical questions

Hi Everybody,
i am very excited to change knowledge here on the SCN.
Right now I am analyzing the SFDM Tool (Shop Floor Dispatching and Monitoring) and need some more Information, which cannot be found via Internet research. I hope someone, who is familiar with the technical details can support me with answers.
1. Master Data:
- How does the Interchange of master data (such as machine capacities in terms of time/quantities or number of available machines) work between the SFDM and the ERP System?
- Is there a permanent interface between the SFDM and the master data in the ERP System?
- If so, which of the master data are communicated?
- Are there any limitations?
- Do BAPIs (Business Application Programming Interface) play a role?
- Is any further master data maintenance necessary, if the customer wants to implement SFDM?
2. There is a backend component situated in the ERP System called "SFDM on ABAP 1.0". What is the aim of this component?
3. Does the SFDM work with algorithms? If so, why?
4. Does the SFDM consider other machines in the same production plant?
5. Does it work over HANA?
6. Any further functionalities or restrictions?

Hi
i wouldn't recommend SFDM for performance problem solving, if this is the issue you are facing.
If this is because planners are "lost" with CM25 because of problems for Production Orders selection and so-on, then try SFDM.
There is no new functionality compared to CM2x transactions within ERP.
The benefits are clearly focused on design and user-friendliness:
interactive logs
easy configuration of settings and strategy compared to CM2x TCodes
accessible details
Please keep also in mind the fact that this is working for individual capacities (cf. Rough Guide) and related constraints in terms of capacity category (only 0001 is supported).
Best regards.
Pierre-Edouard

How can I transfer "notes" from one icloud account to another, and other account questions

Hey,
I currently have 2 icloud accounts. (In total I have 4 seperate apple ids somehow, 1 @me.com, 1 @icloud.com, 1 @gmail.com, and 1 apple id. But that's a problem I'll talk about later).
Right now, all of my notes got deleted from my iphone, but they are on the icloud account A: (@me.com account's icloud.) When I reconnect this account to my iphone, the notes are there. However, when I turn off note syncing in my iphone's icloud settings, I'm not prompted to "keep data on iphone" (like I am prompted with contacts). Instead, they are just deleted from the iphone. So there's no way to connect the icloud account A, download the data, and reconnect icloud account B.
How can I get these notes from icloud account A to icloud account B (or just getting it from icloud account A to my iphone.)
And while I'm at it, how can I get the @icloud account that was linked with the @me.com account to get linked to the @gmail.com account.
Sorry if this is confusing.

Let me rephrase my comment... I used Windows to sync my data without icloud, we decided to switch to mac and purchased a $2000 osx driven machine only to find out apple has "secretly" disabled mobile sync services and replaced it with icloud syncing. There was NO documentation stating this fact before my purchase, it was only realized when users started running into syncing issues that apple disclosed mavericks no longers uses mobile syncing services and "requires you to use icloud to sync device information" on this forum.
They removed a integral part of my privacy without telling me, or warning me, before i spent money on non-refundable merchandice.
These are not mindless, I was forced into mavericks when i purchased a new mac... All other versions of OSX provide modile syncing services.
And I was not threatening lawsuit, i was stating a thought that this leavs apple open to a lawsuit for people who want their data kept private, they are FORCING the use of icloud now.

How does the Java card simulator work? and other misc questions

First, I have a class inherited from Applet. Okay, I did that.
How do I convert this class to a CAP file? I mean I have a class file which is compiled by javac, do I use this file to convert into a CAP file? What is an AID? Do I make up this AID?
In this .scr file (APDU Script), I understand the first 4 bytes, it means to create an Applet, but what about the rest? I know there are some intermixes of lengths and AIDs, I just can't decipher this.
// create wallet applet
0x80 0xB8 0x00 0x00 0x14 0x0a 0xa0 0x0 0x0 0x0 0x62 0x3 0x1 0xc 0x6 0x1 0x08 0 0 0x05 0x01 0x02 0x03 0x04 0x05 0x7F;
And here comes the main question?
How does the simulator work? How do I generate the data that mimics what the card reader reads?
Thanks
Jack

At first blush,
I have these when executing the RMIPurse sample according to the user guide
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported type long of field interfaceHash.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode anewarray in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode new in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode invokespecial in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode aastore in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode new in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode invokespecial in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode aastore in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode new in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode invokespecial in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode aastore in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode new in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode invokespecial in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode aastore in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode new in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode invokespecial in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode aastore in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type long of method dispatch.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported long type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported long type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported long type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported long type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported long type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.UnmarshalException.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported long type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.SkeletonMismatchException.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnmarshalException.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnmarshalException.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnmarshalException.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnmarshalException.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.UnmarshalException.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported type long of field interfaceHash.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported type long of field serialVersionUID.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode anewarray in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode new in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokespecial in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode new in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokespecial in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode new in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokespecial in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode new in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokespecial in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode new in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokespecial in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode anewarray in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokevirtual in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method getMethod(java.lang.String, java.lang.Class[]) of class java.lang.Class.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode pop in clinit method, try a different compiler.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode anewarray in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokevirtual in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method getMethod(java.lang.String, java.lang.Class[]) of class java.lang.Class.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode anewarray in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokevirtual in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method getMethod(java.lang.String, java.lang.Class[]) of class java.lang.Class.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode anewarray in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokevirtual in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method getMethod(java.lang.String, java.lang.Class[]) of class java.lang.Class.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode anewarray in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokevirtual in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method getMethod(java.lang.String, java.lang.Class[]) of class java.lang.Class.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode anewarray in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokevirtual in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method getMethod(java.lang.String, java.lang.Class[]) of class java.lang.Class.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode pop in clinit method, try a different compiler.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of method class$.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method forName(java.lang.String) of class java.lang.Class.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported return type String of invoked method getMessage() of class java.lang.Throwable.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.lang.NoClassDefFoundError.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method invoke(java.rmi.Remote, java.lang.reflect.Method, java.lang.Object[], long) of class java.rmi.server.RemoteRef.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method newCall(java.rmi.server.RemoteObject, java.rmi.server.Operation[], int, long) of class java.rmi.server.RemoteRef.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnexpectedException.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method invoke(java.rmi.Remote, java.lang.reflect.Method, java.lang.Object[], long) of class java.rmi.server.RemoteRef.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method newCall(java.rmi.server.RemoteObject, java.rmi.server.Operation[], int, long) of class java.rmi.server.RemoteRef.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnexpectedException.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method invoke(java.rmi.Remote, java.lang.reflect.Method, java.lang.Object[], long) of class java.rmi.server.RemoteRef.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method newCall(java.rmi.server.RemoteObject, java.rmi.server.Operation[], int, long) of class java.rmi.server.RemoteRef.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnmarshalException.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnmarshalException.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnexpectedException.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method invoke(java.rmi.Remote, java.lang.reflect.Method, java.lang.Object[], long) of class java.rmi.server.RemoteRef.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method newCall(java.rmi.server.RemoteObject, java.rmi.server.Operation[], int, long) of class java.rmi.server.RemoteRef.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnmarshalException.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnexpectedException.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method invoke(java.rmi.Remote, java.lang.reflect.Method, java.lang.Object[], long) of class java.rmi.server.RemoteRef.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method newCall(java.rmi.server.RemoteObject, java.rmi.server.Operation[], int, long) of class java.rmi.server.RemoteRef.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnexpectedException.At the first command prompt, I typed cref -o demoee
and at the next command prompt, I typed ant all, and I got those error messages.
Thanks, you are so nice to help :)
Jack

How do I add a Handwritten Signature to my form? And other Form Questions

Hi there,
I'm making a form for parents who's kids are going to drive a motorcycle for the first time.
Now I want to use my laptop with touchscreen for people to fill it in.
the normal boxes (name, adres etc) with keyboard.
But the important part is the SIGNATURE which has to be handwritten.
It's for insurance and legal autorisation from the parents that the kid is allowed to drive and they know the risks and rules.
How do I add a box in which parents can sign.
Or is there another solution to make it legal?
Another question now I might have someones attention:
After a parent is done filling the form and presses OK or DONE
Is there a way a parent can choose to use a new blank form or the same form again without date of birth/name/sex
so he/she can fill the forms faster for the rest of the kids?
OR
Is it possible to let a parents say I have 4 kids (with a choice menu)
and the parent wil get 4 name/age/sex openings and the rest of the form will stay the same?
And
Is it possible to export the whole bunch into a excel for easy usage
Thanks in advance
and all tips are welcome!
Love
Kim

Just to share some info for this:
I used to do this sort of thing quite a bit. What I used was a scanner to scan my hand written signature to an image file. I would then paste the image file, which supported transparency, over the signature line. More recently, I used Photoshop to draw a signature saving in a transparent image file.
Just to warn you though: you are asking for legal advice, and you are not going to get that here. I would consult with an attorney to find out exactly what is legal.

What is iLife (and other newbie questions

googled this and went to several other sources (wikipedia, apple search) but could not find any good definitions for these terms (at least that a mac newbie could understand)    what is: 1) iOS 2) iLife 3) since i don't own any apple devices other than my mac, could i assume that iOS wouldn't apply to me.
I just recently went from OS X 10.8 > 10.9.1 Maverick and from garage band 10.6 > 10.9.1    GB 10.9 is a whole new world - hardly anything's the same. there were plenty of tutorials and videos for GB 10.6 but i'm having trouble finding one for 10.9.     can anyone point me in the direction of a tut or video . a link would be most app.
as always thanks in adv
5string

I just recently went from OS X 10.8 > 10.9.1 Maverick and from garage band 10.6 > 10.9.1    GB 10.9 is a whole new world - hardly anything's the same.
GarageBand 10 is a very different program, it is more similar to Logic than to GarageBand '11. Also it does not (yet) support the same functionality as GarageBand '11, as you noticed. If you have GarageBand '11 projects, that you want to continue to work with, don't delete the GarageBand '11 installation. The installer will have moved it to a subfolder of Applications. You can continue to use it, even with GB 10.0 installed.
There is not yet much documentation on GB 10.0.
Start with the GarageBand online Help: GarageBand 10.0 Online Help
There is also a short tutorial on the Bullets & Bones GarageBand FAQ:
http://www.bulletsandbones.com/GB/GBFAQ.html#multitrackrecordinggbv10
A "must have" for GarageBand 10 is HangTime's terrific effect finder:
http://www.bulletsandbones.com/GB/File%20Pages/GBEffectFinder.html
This neat utility will tell you, which effects are available for which kind of instrument track.
I'd be lost without this tool.
-- Léonie

New PB 15" Fans, SMS, Temps, Gfx and other related questions!!

Hi All,
Apologies if this is a long one - I have a few points to raise.
As a new 15" PB user I have spent the last week or so scouring these boards for information on my new baby. Much of it has been interesting, and I'd like to address a few of the issues raised.
Fan Noise
Some folks have mentioned a constant but quiet noise from a fan on the unit. i too am aware of this, but it is not the cooling fan, but the HARD DRIVE. I recently upgraded my whisper quiet iBook with a Seagate Momentus 5400rpm 80 GB drive, and the sound on my new PB is exactly the same as that which began after this HD upgrade -these hard drives are slightly noisier than slower models, but i'm happy to live with it as it is non-intrusive.
As to the fan/s themselves on the powerbook - when do they actually turn on? I'm used to the iBook fan kicking in after 20 minutes or so of World of Warcraft, but I have still yet to hear my Powerbook fan outside of running the Apple Hardware Test. How hard do you need to push the machine before they come on?
Temperatures
I can see that there is an issue with most temperature readers in that they don't update on the PB properly. I'm using the latest version of Temperature monitor which seems to update, however the readings seem weird to me:
Graphics Processor 100C, Power Supply Bottom 48C, Processor Bottomside 40.8, Processor /Controller Bottomside 41.5C, Hard Drive 36C, Trackpad 32.5C.
Are these in line with evryone else's? I am concerned specifically about the graphics processor reading, which is odd, as I am simply sitting here typing this with no other apps open. initially thought the program may have picked up on the battery charge rate, as it varied from 97-100, but sometimes it will change erratically for no apparent reason.
Ticking in 3D apps
This may or may not be a new one. When I'm playing 3D intensive games with the sound muted I notice a ticking noise coming from the centre of the unit under the keyboard - it's not hard drive related. The ticking changes in speed depending on the scene shown on the screen, and seems to be consistent with the frame rate, i.e the ticking slows down as the framerate does. Anyone else notice this really weird behaviour?
Apple Hardware Test
When I received the unit a few days ago i ran the Apple Hardware test and was surprised that when we got to the video memory part the screen suddenly went allpatchwork coloured for about 15 seconds. The screen then returned to normal and the test was 'passed'. Is this normal?
Sudden Motion Sensor
The AMS tracker tool at kernalthread.com didn't work on my SMS equipped iBook - I really wanted to try out the little toys the author made where you rotate your machine and the display rotates to suit - a bit like a £1400 version of Warioware Twisted...
Anyway, it doesn't work on my new PB, even though it was specifically designed to do so. I have noticed some issues on here about SMS, so does anyone else with a new Hi res powerbook have the same problem?
Well that's about the total of my observations for the moment - any comments/suggestions would be most gratefully received!
15"PB HiRes, 1.5GB Ram etc Mac OS X (10.4.3)
15"PB HiRes, 1.5GB Ram etc Mac OS X (10.4.3)
15"PB HiRes, 1.5GB Ram etc Mac OS X (10.4.3)

Hi David --
I have comments that might help with regard to a few points in your post.
Re fan noise: I have a Seagate Momentus 100 GB 5400 rpm factory installed and it's whisper quiet. I can't hear it over the noise of my typing even in a quiet room.
Re temps. I, too, have Temperature Monitor v. 3.1 installed. It was the first temp monitor (credit to Ned Snowing for turning me on to it) that appears to update its temperature readings on my PB. I have six temp readings, like you, but none of them are marked graphics processor. Where you have graphics processor, I have "Battery Temperautre." Maybe it's because you have the October 2005 revision PB and I have the February 2005 revision, i don't know.
My temps, starting with "battery" and then following the same ones as you outlined in your post, are: 31, 41.4, 40, 43, 35, 33 all º C. That 100º C reading you have has to be wrong, because it would surely well exceed the outer limits for the machine -- I don't see any category with a specified outer limit temp higher than 82º C.
Can't help on 3D gaming, not really what I use the PB for.
As for the AHT, I haven't run it in a while, but if I remember correctly, the patchwork graphics for 15 minutes thing that you describe is just the AHT doing its thing and testing your PB's graphics capabilities as part of its diagnostic process.
Finally, as far as the Sudden Motion Sensor issue goes, you might find the following (I warn you, very long) thread regarding the effect that upgrading to 10.4.3 (which I see you are running) had on people's SMS. Here's the thread: http://discussions.apple.com/thread.jspa?threadID=228309&tstart=50 the long and short of things appears to be that on many people's PB's (mine included), upgrading to 10.4.3 appears to have messed with System Profiler's ability to report accurately the status of the SMS. It also effects the AMS and the ability of the programs you described to tap into the SMS. You need to read the entire thread carefully to get all the subtleties of what's going on, and no one seems certain as to whether the problem is just a reporting one or whether the issue goes deeper and actually implicates the functionality of the SMS itself. I'm done with it, frankly, until Apple comes out with either a statement (unlikely) or a new update (likely) that hopefully fixes the situation. It's bee reported to death through proper channels.
-- JDee

Read-only connection and other connection questions

Apologies if this is a FAQ (and if it is please point me to them if this is the case) but I've just made the transistion from Toad to SQL Developer and struggling to find the equivelent of a couple of very useful features.
1 ) Read-Only connection: In Toad it is possible to set a connection to read-only via a checkbox. This meant for most of the time you would browse the live DB but when required you could uncheck the box and perform updates i.e. no seperate user required.
2) Colour Coded Connections: In Toad is is possible to assign a colour to your connection and all windows you opened for that connection would inherit the colour. Typically Red for Live, Green for Dev etc.
3) Hide tabs for non active connections: When you have multiple connections open you only saw tabs for the current connection. All others were hidden until their connect was selected.
I've had a look around SQL Dev and cant see these options but may have missed them. Are there similiar options in SQL Developer?

There are feature requests for points 1 and 2 but AFAIK they are not yet implemented.
I dont remember any feature request for point 3, but maybe i've missed it.

Suppressing table continuation variable and other table questions

Hello all,
Is there any way to suppress the table continuation variable from being converted? Is the only way to conditionalize all the occurences in Framemaker?
Also, for some reason, the Framemaker to Robohelp paragraph mapping for my table caption paragraphs aren't being converted properly. Do table captions need to be treated differently from other paragraph tags?
Thanks.
Sue

James, I'm also curious about using a period after the table title, as I can't remember noticing periods after titles in any publications -- is it required by a specific style guide? My Chicago Manual of Style (12th, can't put my hands on 13th or 14th at the moment) does not use periods after titles, an in fact it eschews repeating the title, even. (ref. 12.17)
In FM 7.2 the table continuation variable is a bit schizophrenic, because while the variable content is suppressed (as expected) on the first page of the table, the variable symbol's on-screen horizontal space is not. If the variable's space had been suppressed it would be possible to do
Table 1. XYZ Operation//var//.
and thus have the result that you would like. Very annoying...

CPU Clocks and other MPB questions...

Is there a noticable difference in 2.0 to 2.16?
And is the 17" really that much heavier/bigger?
Can someone recommend a nice shoulder bag?
(I will only be taking it through the house, to cafes, and friends houses)
Thanks!

This is all a judgement call by the individual.
I do not think the 8% clock difference is something you will even notice unless you do very cpu intensive tasks most of the time.
1 lb heavier. It is hardly noticable to me.
Slightly larger. In my work environment the extra inch and a half is not even and issue. I would never notice it. Though it does afford substantially more screen real estate.
Hope this helps.
Kalel

LabVIEW and Internet / Technical questions

On a pure Web approach, there are two ways of architecturing a LabVIEW
application: the server-push approach and the client-pull approach.
1- Server push approach
The server-push approach is based on a CGI process (CGI means common
gateway interface) that runs under the webserver. This CGI process
dynamically builds a GIF file (or is it a JPEG, anyway, an image) that
is sent into a HTML page to the browser. Since this image is constanltly
(re)built, the image is seen as the VI.
My questions are: how is the CGI process linked to the data? Can this
data should be in an ASCII format? Can it be in a database format? Can
this CGI process be linked with another machine (the acquisition
machine) via datasockets? Can t
his CGI process be ran under HTTP server
than the BridgeVIEW server (i.e. Netscape Entreprise server or IIS for
exemple)?
2- Client pull approach
The client-pull approach is based on a JAVA applet that is sent to the
browser. The applet then opens a connection with the server and the data
is sent to the applet. Finally, the JAVA controls (AWT) are updated in
real-time.
My question are: what is the process is listening (and speaking) on a
dedicated port to the applet? Is it a servlet? A CGI process? Something
else? And once again, what is the connection between the server process
and the data?
TIA
Jacques Brisson
Hydro-Quebec
Montreal
Sent via Deja.com http://www.deja.com/
Before you buy.

Jim,
If you already have a working application and just need to read/write a few tags I would look into DataSockets
http://www.ni.com/white-paper/3224/en/
Take a look at the example "Monitor OPC Items with DataSocket.vi" Under Industry Applications > Process Control.
Matt J
Professional Googler and Kudo Addict
National Instruments

120 versus 240hz versus HD and other technical questions

Similar Messages

Maybe you are looking for