12002 The Reporting Web Service is not working.

Hi :)
I have WSUS on Windows Server 2012 std. with Internal Database. Today I've installed 7 updates from patch tuesday and after restart I've got
error 12002 The Reporting Web Service is not working
I can see now that updatet clients can not report their status anymore :(
What's up ? Any suggestion ?
Best regards
Nenad

Hi,
I would start by verifying that the /ReportingWebService resource is properly configured in IIS.
Correct configurations can be found in the WSUS Technical Reference Guide: IIS
Settings for WSUS 3.0 SP2 Web Services.
Also,Under ReportingWebService
Made sure all were set to disabled except for Anonymous Authentication
Anonymous Authentication Enabled
ASP .NET Impersonation Disabled
Basic Authentication Disabled
Forms Authentication Disabled
Windows Authentication Disabled
Regards,
Clarence
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Similar Messages

WSUS not working completely, no MMC connect, all web services are not working

Hello all,
I have a problem not sure what causing it or what is the source of it as I am not into WSUS that much...
THe status is as follows:
I have 1 server 2008 sp2 RTM x64, I had WSUS 3.0 SP2 on it since a while, it was working fine until a week ago, when I started receiving the below messages in the event viewer
I have spent too much time trying to trace or troubleshoot this issue, but all I got was to check the registry and check permissions on the temp folder and other folders, I have done complete removal with the database for the old WSUS and reinstalled it
again but I got the same problem
Nothing strange and no problems happened on the server perior to this issue, it just happened...
Any help will be appreciated
Regards
============== MSG 1 ==============
Log Name:      Application
Source:        Windows Server Update Services
Date:          9/21/2011 1:52:54 PM
Event ID:      7053
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      APP-SVR.DOMAIN.local
Description:
The WSUS administration console has encountered an unexpected error. This may be a transient error; try restarting the administration console. If this error persists,
Try removing the persisted preferences for the console by deleting the wsus file under %appdata%\Microsoft\MMC\.
System.InvalidOperationException -- Client found response content type of 'text/html; charset=utf-8', but expected 'text/xml'.
The request failed with the error message:
<html>
    <head>
        <title>Security Exception</title>
        <style>
         body {font-family:"Verdana";font-weight:normal;font-size: .7em;color:black;}
         p {font-family:"Verdana";font-weight:normal;color:black;margin-top: -5px}
         b {font-family:"Verdana";font-weight:bold;color:black;margin-top: -5px}
         H1 { font-family:"Verdana";font-weight:normal;font-size:18pt;color:red }
         H2 { font-family:"Verdana";font-weight:normal;font-size:14pt;color:maroon }
         pre {font-family:"Lucida Console";font-size: .9em}
         .marker {font-weight: bold; color: black;text-decoration: none;}
         .version {color: gray;}
         .error {margin-bottom: 10px;}
         .expandable { text-decoration:underline; font-weight:bold; color:navy; cursor:hand; }
        </style>
    </head>
    <body bgcolor="white">
            <span><H1>Server Error in '/ApiRemoting30' Application.<hr width=100% size=1 color=silver></H1>
            <h2> <i>Security Exception</i> </h2></span>
            <font face="Arial, Helvetica, Geneva, SunSans-Regular, sans-serif ">
            <b> Description: </b>The application attempted to perform an operation not allowed by the security policy. To grant this application the required permission please contact
your system administrator or change the application's trust level in the configuration file.
            <br><br>
            <b> Exception Details: </b>System.Security.SecurityException: That assembly does not allow partially trusted callers.<br><br>
            <b>Source Error:</b> <br><br>
            <table width=100% bgcolor="#ffffcc">
               <tr>
                  <td>
                      <code>
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.</code>
                  </td>
               </tr>
            </table>
            <br>
            <b>Stack Trace:</b> <br><br>
            <table width=100% bgcolor="#ffffcc">
               <tr>
                  <td>
                      <code><pre>
[SecurityException: That assembly does not allow partially trusted callers.]
   ASP.global_asax..ctor() +0
</pre></code>
                  </td>
               </tr>
            </table>
            <br>
            <hr width=100% size=1 color=silver>
            <b>Version Information:</b> Microsoft .NET Framework Version:2.0.50727.4214; ASP.NET Version:2.0.50727.4209
            </font>
    </body>
</html>

Source
Microsoft.UpdateServices.Administration
Stack Trace:
   at Microsoft.UpdateServices.Administration.AdminProxy.CreateUpdateServer(Object[] args)
   at Microsoft.UpdateServices.Administration.AdminProxy.GetUpdateServer()
   at Microsoft.UpdateServices.UI.AdminApiAccess.AdminApiTools.GetUpdateServer()
   at Microsoft.UpdateServices.UI.SnapIn.Wizards.OOBE.OOBEWizard.get_AdminApiTools()
   at Microsoft.UpdateServices.UI.SnapIn.Wizards.OOBE.OOBEWizard.get_ServerState()
   at Microsoft.UpdateServices.UI.SnapIn.Wizards.OOBE.OOBEWizard.SetNavigationItemEnabledStates()
   at Microsoft.UpdateServices.UI.SnapIn.Wizards.OOBE.OOBEWizard.OOBEWizardInitialize()
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Windows Server Update Services" />
    <EventID Qualifiers="0">7053</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2011-09-21T10:52:54.000Z" />
    <EventRecordID>884368</EventRecordID>
    <Channel>Application</Channel>
    <Computer>APP-SVR.DOMAIN.local</Computer>
    <Security />
</System>
<EventData>
    <Data>The WSUS administration console has encountered an unexpected error. This may be a transient error; try restarting the administration console. If this error persists,
Try removing the persisted preferences for the console by deleting the wsus file under %appdata%\Microsoft\MMC\.
System.InvalidOperationException -- Client found response content type of 'text/html; charset=utf-8', but expected 'text/xml'.
The request failed with the error message:
<html>
    <head>
        <title>Security Exception</title>
        <style>
         body {font-family:"Verdana";font-weight:normal;font-size: .7em;color:black;}
         p {font-family:"Verdana";font-weight:normal;color:black;margin-top: -5px}
         b {font-family:"Verdana";font-weight:bold;color:black;margin-top: -5px}
         H1 { font-family:"Verdana";font-weight:normal;font-size:18pt;color:red }
         H2 { font-family:"Verdana";font-weight:normal;font-size:14pt;color:maroon }
         pre {font-family:"Lucida Console";font-size: .9em}
         .marker {font-weight: bold; color: black;text-decoration: none;}
         .version {color: gray;}
         .error {margin-bottom: 10px;}
         .expandable { text-decoration:underline; font-weight:bold; color:navy; cursor:hand; }
        </style>
    </head>
    <body bgcolor="white">
            <span><H1>Server Error in '/ApiRemoting30' Application.<hr width=100% size=1 color=silver></H1>
            <h2> <i>Security Exception</i> </h2></span>
            <font face="Arial, Helvetica, Geneva, SunSans-Regular, sans-serif ">
            <b> Description: </b>The application attempted to perform an operation not allowed by the security policy. To grant this application the required permission
please contact your system administrator or change the application's trust level in the configuration file.
            <br><br>
            <b> Exception Details: </b>System.Security.SecurityException: That assembly does not allow partially trusted callers.<br><br>
            <b>Source Error:</b> <br><br>
            <table width=100% bgcolor="#ffffcc">
               <tr>
                  <td>
                      <code>
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.</code>
                  </td>
               </tr>
            </table>
            <br>
            <b>Stack Trace:</b> <br><br>
            <table width=100% bgcolor="#ffffcc">
               <tr>
                  <td>
                      <code><pre>
[SecurityException: That assembly does not allow partially trusted callers.]
   ASP.global_asax..ctor() +0
</pre></code>
                  </td>
               </tr>
            </table>
            <br>
            <hr width=100% size=1 color=silver>
            <b>Version Information:</b> Microsoft .NET Framework Version:2.0.50727.4214; ASP.NET Version:2.0.50727.4209
            </font>
    </body>
</html>

Source
Microsoft.UpdateServices.Administration
Stack Trace:
   at Microsoft.UpdateServices.Administration.AdminProxy.CreateUpdateServer(Object[] args)
   at Microsoft.UpdateServices.Administration.AdminProxy.GetUpdateServer()
   at Microsoft.UpdateServices.UI.AdminApiAccess.AdminApiTools.GetUpdateServer()
   at Microsoft.UpdateServices.UI.SnapIn.Wizards.OOBE.OOBEWizard.get_AdminApiTools()
   at Microsoft.UpdateServices.UI.SnapIn.Wizards.OOBE.OOBEWizard.get_ServerState()
   at Microsoft.UpdateServices.UI.SnapIn.Wizards.OOBE.OOBEWizard.SetNavigationItemEnabledStates()
   at Microsoft.UpdateServices.UI.SnapIn.Wizards.OOBE.OOBEWizard.OOBEWizardInitialize()</Data>
</EventData>
</Event>
============== MSG 2 ==============
Log Name:      Application
Source:        Windows Server Update Services
Date:          9/21/2011 1:53:01 PM
Event ID:      13051
Task Category: 6
Level:         Warning
Keywords:      Classic
User:          N/A
Computer:      APP-SVR.DOMAIN.local
Description:
No client computers have ever contacted the server.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Windows Server Update Services" />
    <EventID Qualifiers="0">13051</EventID>
    <Level>3</Level>
    <Task>6</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2011-09-21T10:53:01.000Z" />
    <EventRecordID>884373</EventRecordID>
    <Channel>Application</Channel>
    <Computer>APP-SVR.DOMAIN.local</Computer>
    <Security />
</System>
<EventData>
    <Data>No client computers have ever contacted the server.</Data>
</EventData>
</Event>
============== MSG 3 ==============
Log Name:      Application
Source:        Windows Server Update Services
Date:          9/21/2011 1:53:01 PM
Event ID:      12002
Task Category: 9
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      APP-SVR.DOMAIN.local
Description:
The Reporting Web Service is not working.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Windows Server Update Services" />
    <EventID Qualifiers="0">12002</EventID>
    <Level>2</Level>
    <Task>9</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2011-09-21T10:53:01.000Z" />
    <EventRecordID>884374</EventRecordID>
    <Channel>Application</Channel>
    <Computer>APP-SVR.DOMAIN.local</Computer>
    <Security />
</System>
<EventData>
    <Data>The Reporting Web Service is not working.</Data>
</EventData>
</Event>
============== MSG 4 ==============
Log Name:      Application
Source:        Windows Server Update Services
Date:          9/21/2011 1:53:01 PM
Event ID:      12012
Task Category: 9
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      APP-SVR.DOMAIN.local
Description:
The API Remoting Web Service is not working.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Windows Server Update Services" />
    <EventID Qualifiers="0">12012</EventID>
    <Level>2</Level>
    <Task>9</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2011-09-21T10:53:01.000Z" />
    <EventRecordID>884375</EventRecordID>
    <Channel>Application</Channel>
    <Computer>APP-SVR.DOMAIN.local</Computer>
    <Security />
</System>
<EventData>
    <Data>The API Remoting Web Service is not working.</Data>
</EventData>
</Event>
============== MSG 5 ==============
Log Name:      Application
Source:        Windows Server Update Services
Date:          9/21/2011 1:53:01 PM
Event ID:      12032
Task Category: 9
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      APP-SVR.DOMAIN.local
Description:
The Server Synchronization Web Service is not working.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Windows Server Update Services" />
    <EventID Qualifiers="0">12032</EventID>
    <Level>2</Level>
    <Task>9</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2011-09-21T10:53:01.000Z" />
    <EventRecordID>884376</EventRecordID>
    <Channel>Application</Channel>
    <Computer>APP-SVR.DOMAIN.local</Computer>
    <Security />
</System>
<EventData>
    <Data>The Server Synchronization Web Service is not working.</Data>
</EventData>
</Event>
============== MSG 6 ==============
Log Name:      Application
Source:        Windows Server Update Services
Date:          9/21/2011 1:53:01 PM
Event ID:      12022
Task Category: 9
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      APP-SVR.DOMAIN.local
Description:
The Client Web Service is not working.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Windows Server Update Services" />
    <EventID Qualifiers="0">12022</EventID>
    <Level>2</Level>
    <Task>9</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2011-09-21T10:53:01.000Z" />
    <EventRecordID>884377</EventRecordID>
    <Channel>Application</Channel>
    <Computer>APP-SVR.DOMAIN.local</Computer>
    <Security />
</System>
<EventData>
    <Data>The Client Web Service is not working.</Data>
</EventData>
</Event>
============== MSG 7 ==============
Log Name:      Application
Source:        Windows Server Update Services
Date:          9/21/2011 1:53:01 PM
Event ID:      12042
Task Category: 9
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      APP-SVR.DOMAIN.local
Description:
The SimpleAuth Web Service is not working.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Windows Server Update Services" />
    <EventID Qualifiers="0">12042</EventID>
    <Level>2</Level>
    <Task>9</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2011-09-21T10:53:01.000Z" />
    <EventRecordID>884378</EventRecordID>
    <Channel>Application</Channel>
    <Computer>APP-SVR.DOMAIN.local</Computer>
    <Security />
</System>
<EventData>
    <Data>The SimpleAuth Web Service is not working.</Data>
</EventData>
</Event>
============== MSG 8 ==============
Log Name:      Application
Source:        Windows Server Update Services
Date:          9/21/2011 1:53:01 PM
Event ID:      12052
Task Category: 9
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      APP-SVR.DOMAIN.local
Description:
The DSS Authentication Web Service is not working.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Windows Server Update Services" />
    <EventID Qualifiers="0">12052</EventID>
    <Level>2</Level>
    <Task>9</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2011-09-21T10:53:01.000Z" />
    <EventRecordID>884379</EventRecordID>
    <Channel>Application</Channel>
    <Computer>APP-SVR.DOAMIN.local</Computer>
    <Security />
</System>
<EventData>
    <Data>The DSS Authentication Web Service is not working.</Data>
</EventData>
</Event>
============== MSG 9 ==============
Log Name:      Application
Source:        ASP.NET 2.0.50727.0
Date:          9/21/2011 1:53:09 PM
Event ID:      1314
Task Category: Web Event
Level:         Information
Keywords:      Classic
User:          N/A
Computer:      APP-SVR.DOMAIN.local
Description:
Event code: 4010
Event message: An unhandled security exception has occurred.
Event time: 9/21/2011 1:53:09 PM
Event time (UTC): 9/21/2011 10:53:09 AM
Event ID: 11b96ca285fa46d2a05d38e2e9b168af
Event sequence: 1
Event occurrence: 1
Event detail code: 0
Application information:
    Application domain: /LM/W3SVC/715372307/ROOT/ApiRemoting30-7-129610759889193820
    Trust level: High
    Application Virtual Path: /ApiRemoting30
    Application Path: C:\Program Files\Update Services\WebServices\ApiRemoting30\
    Machine name: APP-SVR
Process information:
    Process ID: 8332
    Process name: w3wp.exe
    Account name: NT AUTHORITY\NETWORK SERVICE
Request information:
    Request URL:
http://app-svr:8530/ApiRemoting30/WebService.asmx
    Request path: /ApiRemoting30/WebService.asmx
    User host address: 192.168.5.22
    User:
    Is authenticated: False
    Authentication Type:
    Thread account name: NT AUTHORITY\NETWORK SERVICE
Custom event details:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="ASP.NET 2.0.50727.0" />
    <EventID Qualifiers="16384">1314</EventID>
    <Level>4</Level>
    <Task>3</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2011-09-21T10:53:09.000Z" />
    <EventRecordID>884380</EventRecordID>
    <Channel>Application</Channel>
    <Computer>APP-SVR.DOMAIN.local</Computer>
    <Security />
</System>
<EventData>
    <Data>4010</Data>
    <Data>An unhandled security exception has occurred.</Data>
    <Data>9/21/2011 1:53:09 PM</Data>
    <Data>9/21/2011 10:53:09 AM</Data>
    <Data>11b96ca285fa46d2a05d38e2e9b168af</Data>
    <Data>1</Data>
    <Data>1</Data>
    <Data>0</Data>
    <Data>/LM/W3SVC/715372307/ROOT/ApiRemoting30-7-129610759889193820</Data>
    <Data>High</Data>
    <Data>/ApiRemoting30</Data>
    <Data>C:\Program Files\Update Services\WebServices\ApiRemoting30\</Data>
    <Data>APP-SVR</Data>
    <Data>
    </Data>
    <Data>8332</Data>
    <Data>w3wp.exe</Data>
    <Data>NT AUTHORITY\NETWORK SERVICE</Data>
    <Data>http://app-svr:8530/ApiRemoting30/WebService.asmx</Data>
    <Data>/ApiRemoting30/WebService.asmx</Data>
    <Data>192.168.5.22</Data>
    <Data>
    </Data>
    <Data>False</Data>
    <Data>
    </Data>
    <Data>NT AUTHORITY\NETWORK SERVICE</Data>
</EventData>
</Event>
Saleh Ramadan

So, in reality, this issue has nothing at all to do with "it was working; now it is not", because you've destroyed all of the evidence that would exist in a "was working; now is not" scenario. What we really have here is a NEW installation that has failed.
So, from the perspective of a NEW installation that is not working...
Are there any other roles, features, services, or applications installed on this server?
Did you install the Web Server Role exactly as described in the documentation?
Did you install the WSUS Role exactly as described in the documentation?
Were there any other roles, features, services, or applications installed onto this server
after your original (working) installation of WSUS?
Lawrence Garvin, M.S., MCITP:EA, MCDBA, MCSA
Principal/CTO, Onsite Technology Solutions, Houston, Texas
Microsoft MVP - Software Distribution (2005-2011)
My MVP Profile: http://mvp.support.microsoft.com/profile/Lawrence.Garvin
My Blog: http://onsitechsolutions.spaces.live.com
Oh, well, I have red and followed the documentation exactly step-by-step on the technet library, and I can guarantee you nothing went wrong because this is not my first installation for it
When I told you about the old damaged installation and the new installation which is also failed and showed me the same symptoms as the old one, I was sure that nothing wrong with the WSUS itself, but rather it is something wrong with the environment
Answering to your above questions, the answer for all is that: that server is only used for WSUS, nothing more
Anyway, I have managed to restore the service thanks to your previous reply where you point to the CONFIG folder inside the NET framework folder, I checked the files in there, some were changed to the date I think has stopped the service, so I repaired the
NET framework 2, and restarted
It is working fine now and syncing with the update server
Saleh Ramadan

The report server service is not running on Reporting Service Point server

Hi,
I have encountered a problem, my reporting service point has stopped working. (SCCM 2012 R2)
In srsrp.log:
Check state SMS_SRS_REPORTING_POINT
12/15/2014 5:48:54 AM 3152 (0x0C50)
Check server health. SMS_SRS_REPORTING_POINT
12/15/2014 5:48:54 AM 3152 (0x0C50)
Successfully created srsserver SMS_SRS_REPORTING_POINT
12/15/2014 5:48:54 AM 3152 (0x0C50)
Reporting Services URL from Registry [https://s-hub-sql1.domain.local/ReportServer/ReportService2005.asmx]
SMS_SRS_REPORTING_POINT 12/15/2014 5:48:54 AM
3152 (0x0C50)
The request failed with HTTP status 404: Not Found.
SMS_SRS_REPORTING_POINT 12/15/2014 5:48:54 AM
3152 (0x0C50)
(!) SRS not detected as running SMS_SRS_REPORTING_POINT
12/15/2014 5:48:54 AM 3152 (0x0C50)
Failures reported during periodic health check by the SRS Server S-HUB-SQL1.domain.local.
SMS_SRS_REPORTING_POINT 12/15/2014 5:48:54 AM
3152 (0x0C50)
Registry change SMS_SRS_REPORTING_POINT
12/15/2014 5:48:54 AM 3152 (0x0C50)
Waiting for changes for 1 minutes SMS_SRS_REPORTING_POINT
12/15/2014 5:48:54 AM 3152 (0x0C50)
Timed Out... SMS_SRS_REPORTING_POINT
12/15/2014 5:49:54 AM 3152 (0x0C50)
Set configuration SMS_SRS_REPORTING_POINT
12/15/2014 5:49:54 AM 3152 (0x0C50)
In windows event log:
On 12/15/2014 6:39:28 PM, component SMS_SRS_REPORTING_POINT on computer S-HUB-SQL1 reported: The report server service is not running on Reporting Service Point server "S-HUB-SQL1"; start the service to enable reporting.
In configuration manager service manager, the service sms_srs_reporting_point is running.
In Reporting services configuration manager, the service is running.
If I restart the reporting service, it doesn't helps.
What is not properly?

I've already found the reason why all stopped working - someone deleted the report manager URL HTTPS bindings (in Report services configuration manager). Added it back, than reporting started to work. Awww!

Web Service is not working after Upgrade SAP EHP6

Hi ,
Recently we upgraded SAP ECC 6.0 to EHP 6.
We have a custom web service which is consumed in .NET Application to get the Sold To from Sales Order.
the service is working perfectly before upgrade and it is not working after upgrade to EHP6.
When I tested the Service in WS Navigator in SAP, it is working fine.
We raised a message to SAP and SAP analyze the Traces and confirm that the HTTP Request Header coming from .NET application is not having User ID and Password , so it is throwing exception from SAP as unauthorized.
But in service it is configuration as basic authentication and log on using user id and password and .NET application is calling service by passing user ID & Password.
Customer is not happy as it is working before Upgrade and SAP confirmed every thing fine in SAP, but the service is not working.
we did the below steps.
Regenerated the configuration
Re imported the Certificates
Activated the service in SICF.
Please let me know if anybody have same problem or if any steps we are missing.
thanks.
Uma

after changing the .NET Application , Service is working fine.

Web Services do not work in NSW2004S ABAP Sneak Preview

Guys,
I can't connect to the XMLA service (even though it's active in SICF) in a NW2004S ABAP Sneak Preview. Can you confirm that web services are not available in the Preview?. Will they work if i apply a patch the the SNeak Preview?
Please let me know,
Thanks,
Gili

it will work in 2004s sneak preview.
there were some problems while creating clients (2004S MiniSAP ABAP: SAPGUI crashes when creating a Web Service)
whats the exact error you are getting?
Raja

Simple JAX-WS web service does not work on WS7u6

Hello,
I am trying to deploy a very simple JAX-WS web service on WS7u6, but it is not working. The same service deployed on Tomcat 6.0.16 works fine.
The service I'm trying to deploy is from a tutorial on the Netbeans website: [http://netbeans.org/kb/docs/websvc/jax-ws.html] - it is a simple calculator web service that adds two ints and returns an int.
I follow the tutorial to the letter, but when I attempt to deploy on WS7, it fails as follows:
[10/Dec/2009:21:21:44] info (25757): CORE3276: Installing a new configuration
[10/Dec/2009:21:21:44] info (25757): WEB0118: SSO is enabled in virtual server [dadydude.qisc.com]
[10/Dec/2009:21:21:44] info (25757): WEB0100: Loading web module in virtual server [dadydude.qisc.com] at [/wstest]
[10/Dec/2009:21:21:44] info (25757): WSSERVLET12: JAX-WS context listener initializing
[10/Dec/2009:21:21:44] info (25757): wsdl cannot be found from DD or annotation. Will generate and publish a new WSDL for SEI endpoints.
[10/Dec/2009:21:21:44] failure (25757): WSSERVLET11: failed to parse runtime descriptor: class: org.me.calculator.jaxws.Add could not be found
class: org.me.calculator.jaxws.Add could not be found
     at com.sun.xml.ws.modeler.RuntimeModeler.getClass(RuntimeModeler.java:271)
     at com.sun.xml.ws.modeler.RuntimeModeler.processDocWrappedMethod(RuntimeModeler.java:562)
     at com.sun.xml.ws.modeler.RuntimeModeler.processMethod(RuntimeModeler.java:509)
     at com.sun.xml.ws.modeler.RuntimeModeler.processClass(RuntimeModeler.java:355)
     at com.sun.xml.ws.modeler.RuntimeModeler.buildRuntimeModel(RuntimeModeler.java:251)
     at com.sun.xml.ws.server.RuntimeEndpointInfo.createSEIModel(RuntimeEndpointInfo.java:170)
     at com.sun.xml.ws.server.RuntimeEndpointInfo.init(RuntimeEndpointInfo.java:317)
     at com.sun.xml.ws.transport.http.servlet.WSServletContextListener.createModelAndMetadata(WSServletContextListener.java:200)
     at com.sun.xml.ws.transport.http.servlet.WSServletContextListener.contextInitialized(WSServletContextListener.java:120)
     at org.apache.catalina.core.StandardContext.listenerStart(StandardContext.java:4456)
     at org.apache.catalina.core.StandardContext.start(StandardContext.java:5113)
     at com.sun.webserver.connector.nsapi.WebModule.start(WebModule.java:235)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1224)
     at org.apache.catalina.core.StandardHost.start(StandardHost.java:924)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1224)
     at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:520)
     at org.apache.catalina.startup.Embedded.start(Embedded.java:917)
     at com.sun.enterprise.web.PwcWebContainer.onStartup(PwcWebContainer.java:70)
     at com.sun.webserver.connector.nsapi.WebContainer.start(WebContainer.java:491)
     at com.sun.webserver.init.J2EERunner.confPostInit(J2EERunner.java:304)
[10/Dec/2009:21:21:44] failure (25757): WebModule[/wstest]PWC1275: Exception sending context initialized event to listener instance of class com.sun.xml.ws.transport.http.servlet.WSServletContextListener
WSSERVLET11: failed to parse runtime descriptor: class: org.me.calculator.jaxws.Add could not be found
     at com.sun.xml.ws.transport.http.servlet.WSServletContextListener.contextInitialized(WSServletContextListener.java:131)
     at org.apache.catalina.core.StandardContext.listenerStart(StandardContext.java:4456)
     at org.apache.catalina.core.StandardContext.start(StandardContext.java:5113)
     at com.sun.webserver.connector.nsapi.WebModule.start(WebModule.java:235)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1224)
     at org.apache.catalina.core.StandardHost.start(StandardHost.java:924)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1224)
     at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:520)
     at org.apache.catalina.startup.Embedded.start(Embedded.java:917)
     at com.sun.enterprise.web.PwcWebContainer.onStartup(PwcWebContainer.java:70)
     at com.sun.webserver.connector.nsapi.WebContainer.start(WebContainer.java:491)
     at com.sun.webserver.init.J2EERunner.confPostInit(J2EERunner.java:304)
Caused by: class: org.me.calculator.jaxws.Add could not be found
     at com.sun.xml.ws.modeler.RuntimeModeler.getClass(RuntimeModeler.java:271)
     at com.sun.xml.ws.modeler.RuntimeModeler.processDocWrappedMethod(RuntimeModeler.java:562)
     at com.sun.xml.ws.modeler.RuntimeModeler.processMethod(RuntimeModeler.java:509)
     at com.sun.xml.ws.modeler.RuntimeModeler.processClass(RuntimeModeler.java:355)
     at com.sun.xml.ws.modeler.RuntimeModeler.buildRuntimeModel(RuntimeModeler.java:251)
     at com.sun.xml.ws.server.RuntimeEndpointInfo.createSEIModel(RuntimeEndpointInfo.java:170)
     at com.sun.xml.ws.server.RuntimeEndpointInfo.init(RuntimeEndpointInfo.java:317)
     at com.sun.xml.ws.transport.http.servlet.WSServletContextListener.createModelAndMetadata(WSServletContextListener.java:200)
     at com.sun.xml.ws.transport.http.servlet.WSServletContextListener.contextInitialized(WSServletContextListener.java:120)
     ... 11 more
[10/Dec/2009:21:21:44] failure (25757): PWC1306: Startup of context /wstest failed due to previous errors
[10/Dec/2009:21:21:44] failure (25757): Null component com.sun.web-3:type=JspMonitor,name=jsp,WebModule=//localhost/wstest,J2EEApplication=null,J2EEServer=none
[10/Dec/2009:21:21:44] info (25757): CORE3280: A new configuration was successfully installed
[10/Dec/2009:21:21:44] info (25757): WSSERVLET13: JAX-WS context listener destroyedAm I simply missing something obvious here?
Thanks,
Bill

OK, I've made significant progress.
As I suspected, JAX-WS was indeed supposed to generate the missing class for me, but while it appears to do so automatically when deploying in Tomcat, it is necessary to hack your build.xml file to add the generated classes to your WAR file for WS7. Reference [http://developers.sun.com/webtier/reference/techart/websvcs_nb.html] for a (rather dated) description of how to deploy a JAX-WS service on WS7 (using Netbeans 5.0!).
Note that as of NB6.7/6.8 much of the manual process is now done automatically by Netbeans, but curiously, not the part that actually causes the web service code to be generated. For that, we have to manually modify the build.xml to include a "-pre-dist" target that invokes the wsgen Ant task.
This is the target I added to build.xml for this sample calculator service:
<target name="-pre-dist">
    <taskdef name="wsgen" classname="com.sun.tools.ws.ant.WsGen">
      <classpath path="${javac.classpath}:${j2ee.platform.classpath}"/>
    </taskdef>
    <wsgen
      debug="true"
      keep="true"
      destdir="build/web/WEB-INF/classes"
      resourcedestdir="build/web/WEB-INF/classes"
      xendorsed="true"
      sei="org.me.calculator.CalculatorWS">
      <classpath>
        <pathelement path="${javac.classpath}:${j2ee.platform.classpath}"/>
        <pathelement location="${java.home}/../lib/tools.jar"/>
        <pathelement location="build/web/WEB-INF/classes"/>
      </classpath>
    </wsgen>
</target>That will allow the project to build and deploy successfully, and I am now able to view my WSDL.
However, at first the service itself was not working. After a bit of casting about, I determined that this was due to the fact that at some point I had added the METRO library to the project rather than simply the JAX-WS 2.2 library. After returning the configuration to just use JAX-WS and doing a clean build and deploy, the simple web service now works!
One thought does emerge from all this, though: if the built in support for Tomcat runs wsgen for me when I deploy an app to that container, perhaps the Sun WS7 team needs to update their Netbeans plugin to do this for us, too. I should probably open a support case on that...
OK, now on to real work. ;-)
Bill

Primavera Web services does not work properly when I move the database.

I am using primavera web services to integrate a winform application (using c#) with primavera. It was successful with my original database, but when I decided to move my database to another server ( It is a sql server 2005 database and I use backup/restore to move database to new server). I changed the database configuration for the webservices so that it refers to the new database on the new server.
I used the following code to login to webservices:
                AuthenticationService authService = new AuthenticationService( );
                authService.CookieContainer = new System.Net.CookieContainer( );
                authService.Url = _P6wsAuthenticationService;
                Login loginObj = new Login( );
                loginObj.UserName = pv_Username;
                loginObj.Password = pv_Password;
                loginObj.DatabaseInstanceId = 1;
                loginObj.DatabaseInstanceIdSpecified = true;
                loginObj.VerboseFaults = true;
                loginObj.VerboseFaultsSpecified = true;
                LoginResponse loginReturn = authService.Login( loginObj );
                cookieContainer = authService.CookieContainer;
               ReadDatabaseInstancesResponseDatabaseInstance[] readdbInstances = authService.ReadDatabaseInstances("");
the loginResponse for the new server is true and it shows the db properties correctly in readdbInstances. But when I try to read projects from database it returns nothing. It doesn't give me any error message just the response message is null.
Could anybody help me with this issue?
Thank you

Thanks Frank for help us, but when I writing this comment we are doing at home. So, we going to test the page in a stand alone weblogic server 10.3.5. We wrote the URL as :
" http://<our ip>:7001/myApp/faces/index.jspx "
this application contains a report desing and compiled with iReport 4.5.1 ( last version in the moment ), we can see the report when I press a commanButton without any problem.
But now, we need try your suggestions in the office, and give you more information about it . Thanks for the moment.
In the Afternoon we gonna give you more information about it .

Web Service is not working in COldfusion 8

Hi,
I am using the following code for creating the web service.
this code was perfectly working in Coldfusion 7,
however not working in Coldfusion 8.
<cfscript>
    try {
        ws = CreateObject("webservice", CurrentURL & "IntouchDataService.cfc?wsdl");
    } catch (any e) {
        WriteOutput("Error occured while invoking the Web Service at: ");
        WriteOutput('<a href="#CurrentURL#IntouchDataService.cfc?wsdl">#CurrentURL#IntouchDataService.cfc?wsdl </a>');
        WriteOutput('<hr /><h2>');
        WriteOutput(e.message);
        WriteOutput('</h2><hr />');
        WriteOutput(e.detail);
        WriteOutput('<hr />');
        WriteOutput(e.StackTrace);
</cfscript>
Follwoing error i got:
coldfusion.jsp.CompilationFailedException: Errors reported by Java compiler: Found 1 semantic error compiling "E:/ColdFusion8/stubs/WS-2123243560/coldfusion/xml/rpc/CFCInvocationException.java": < 10. public class CFCInvocationException extends org.apache.axis.AxisFault implements java.io.Serializable { . . . 88. } > *** Semantic Error: A class file was not generated for the type "coldfusion.xml.rpc.CFCInvocationException" because a library method that it depends on was not found. See system messages for more information. Found 1 semantic error compiling "E:/ColdFusion8/stubs/WS-2123243560/com/intouchsupport/www/IntouchDataService/TestWebServ iceLocator.java": < 10. public class TestWebServiceLocator extends org.apache.axis.client.Service implements com.intouchsupport.www.IntouchDataService.TestWebSe
Also i did lot of googling to solve this issue but no luck.
also i found following blog about this issue also and i did the give steps however problem not solved.
http://tjordahl.blogspot.com/2007/09/coldfusion-8-getting-started-code.html
Can somebody help me to sort out this issue?
thanks
Prashant Gupta

Hi,
I got solution to my problem of webservice is not working in CF8.
the problem was
we have already a "rt.jar" file in a location and we defined this location in CF Admin >> java jvm >> classpath
so this file was conflicting.
i simply removes this file path from CF Admin.
and restart the CF services.
and my web service start working.

Web Service is not Working

HI Experts,
I have created a FM for creation/updating of Business Partner. My FM is working fine and not giving error.
I published this FM as a Web Service, and it got generated successfully.
Now when i am running this web service, my FM is not working properly and start throwing errors.
do i need to follow some specific guidelines in coding?
any idea what could be the reason?
Dave

HI Hemant,
Error which i am getting are related to ABAP code.
like i am updating BP's marketing attributes, Relationships Sales Area Data.
i have used Std. BAPI's for updating these.
in my FM these are working fine no error is given, but when i test my Web Service these BAPI start giving errors.
for example: Relation Ship is giving like invalid relation ship category
In-valid Sales Area
Any idea what could be the reason.
Dave

Web service is not working in tranported server

hi. experts
i have developed a webservice in server 1 and have used that webservice wsdl file in adobe form it is working fine in server1. I have transported adobe form in Server2 but webservice in that server is not working ..
can u tell me what is solution for this ??
thanks in advance..
Jitendra

Hi,
I got solution to my problem of webservice is not working in CF8.
the problem was
we have already a "rt.jar" file in a location and we defined this location in CF Admin >> java jvm >> classpath
so this file was conflicting.
i simply removes this file path from CF Admin.
and restart the CF services.
and my web service start working.

Web Service Scenario Not Working

Hi Sdners,
I am working on Support project where I have web Service to RFC Scenario which is synchronus scenario. when the user sending the WSDL request to XI it's woking fine in for Devlopment but it is not working QA .In QA i am gettings error below
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="RFC_ADAPTER">APPLICATION_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="urn:sap-com:document:sap:rfc:functions">ZCA_RATE_INTF.Exception</SAP:ApplicationFaultMessage>
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
When I asking user to send the message from their they are coming to QA syetm insted of DEV.........for this where I have to check........
Edited by: gangadhar kh on Mar 3, 2010 12:29 PM

HI All,
Can anyone help me on this?
there is no communication is going between the sender system(Web Service) to PI . When user is sending the data through URL he is not able to send the data and when he is sending the data . I am getting the message in PI/XI(MONI) messsage coming (with system Error with balls sign)

- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="RFC_ADAPTER">APPLICATION_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="urn:sap-com:document:sap:rfc:functions">ZCA_PRICE_F_EX_RATE_INTF.Exception</SAP:ApplicationFaultMessage>
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
and IN payload of This message
RFC_ERROR_SYSTEM_FAILURE</ID><Attributes><V1>CALL_FUNCTION_NO_DEST</V1>
Please suggest on this Problem
Regards
Edited by: gangadhar kh on Mar 8, 2010 6:00 AM

Web Service do not work after save in Designer ES2 SP1

Dear all,
I am trying to migrate 8.2.1 process to ES2.
Although it have some bugs, but the process are working fine when using ES2 without any SP.
One day we installed SP1 for ES2 and hopeing for some bugs we found fixed, but find none of them fixed... oh well, so we continue the migration.
And the problem happen when we try to modify the form for some testing, we find that even we *did not* modify anything in the form, if we pressed the save button and deploy the form, all the web service related code in the form will stop working.
Anyone have any idea about this?
Thanks in advance.
Regards
Bill

Hi Paul,
Thanks for the suggestion.
Already tried to update the dataconnection by right click at data view, and choice "Refresh Data View", but that doesn't help, would like to know are there any others way to do so?
I already open a case with the support, but it seem that the engineer in APAC region have a very slow response time...
Just wonder if I can send the case to others support center with better response time.
I tried to compare the form before and after save and find that some information may missing in the post-SP1 form.
In the pre-SP1 from, I can find a <dd:dataDescription> section for every web service used in the form, but in the post-SP1 form they are missing.
I tried to add that section back and it will make the web service usable again, but the problem is I need to do that every times I modify anything, and I also need to create this section for a every new web service added to the form...
Regards
Bill

Delphi Client Web Service does not work fine

I wrote a Hello web service with a method and with a parameter, and import WSDL in delphi, All works very well. But when I add two parameters I receive the error below:
java.lang.IllegalStateException: Cannot obtain java type for: {urn:CalculatorFacade/types}add
at org.jboss.axis.description.ServiceDesc.syncOperationToClass(ServiceDesc.java:710)
at org.jboss.axis.description.ServiceDesc.getSyncedOperationsForName(ServiceDesc.java:1187)
at org.jboss.axis.description.ServiceDesc.loadServiceDescByIntrospectionRecursive(ServiceDesc.java:1045)
at org.jboss.axis.description.ServiceDesc.loadServiceDescByIntrospection(ServiceDesc.java:972)
Using the google I discovery this tutorial.
http://www.javapassion.com/planning/handsonbyol/netbeanswebservices
I wrote a calculator web service with Netbeans and deploy it on jboss-4.0.3.
So I was change my project parameters to change wscompile parameters: rpcliteral, strict
When I execute the code: x = calc.add(a, b)
I receive another error:
faultDetail:
{http://xml.apache.org/axis/}stackTrace: javax.xml.rpc.JAXRPCException: No such operation 'int_1'
at org.jboss.axis.providers.java.RPCInvocation.prepareFromRequestEnvelope(RPCInvocation.java:273)
at org.jboss.axis.providers.java.RPCProvider.processMessage(RPCProvider.java:103)
at org.jboss.axis.providers.java.JavaProvider.invoke(JavaProvider.java:358)
I test this web service in a Java client and it works very fine, but with delphi client it does not work :(
Can someone help me?
[]s, Welington B. Souza

Welington,
Could you post the source of the web service that gives you the error?

Web service does not work in production mode

Hi!
I created a small web service with the WorkShop in BEA Weblogiv 7.0.
If I start the server in production mode, then my service is not visible. It can
not be accessed, neither its WSDL. In development mode it works. I tried to create
an EAR file and deploy it, but when I do that in the web console, it all says
that it is deployed, but I can not access the WSDL or anything else.
Does the WSDL URL change in production mode ?
Help !
Best regards,
David

Thanks for reply.
It seems nothing matters.
I changed wlw-config file:
     <hostname>localhost</hostname>
     <protocol>http</protocol>
     <http-port>8002</http-port>
     <service>
          <class-name>com.mycom.MyWS</class-name>
          <protocol>http</protocol>
     </service>
I changed wsdl soap address
to
http://localhost:8002/MyWS/com/mycom/MyWS.jws
I deployed it to managed server at port 8002 and admin server at 7001. but still, admin server works and the other one does not.

FMS on Amazon Web Services is not working in EU West

I get this Error when i tries to launch ami-af5563db in EU West
So the service cannot be used!
"Registered machine image manifest for ami-af5563db and manifest in S3 differ. Has the image been rebundled but not re-registered?"
When is this solved?

When is the release date?
I can see the Usage Charges for EU is on the Application Billing web page.

12002 The Reporting Web Service is not working.

Similar Messages

Maybe you are looking for