13" macbook pro can't detect tv

So once again I am wondering if anyone can offer a solution for this problem; my 13'' macbook pro will not detect any tv that it is connected to.  I have tried both a 42'' Vizio and a 40" Samsung.  I got it to connect two times, and then nothing. Help me Obi Wan Kanobi, your my only hope...

Sorry that I didn't update after my trip to the Apple Store.
They fixed it, but it was weird. The booted to an external USB drive to a different install of 10.5. From there, they were able to set the drive region to 1 (I'm in America), and the choices allowed 2,3,4, but no others. That was strange in and of itself.
After they set the region, it must have updated the drive firmware, because when we rebooted into my install, the DVD played perfectly.
I'm not sure why this happened, or what flakiness is happening in the DVD regions with regard to this new MBP, but it works now.
Perhaps you can find a colleague with a Mac with firewire and you can use it to boot into Target Disk Mode and use their OSX install to help configure your DVD region? Booting to USB media is also possible. I'm just trying to brainstorm some suggestions to try that might keep you from having to do a fresh reinstall.

Similar Messages

  • My Macbook Pro can't detect or read my CDFS file system external HDD

    My Macbook Pro can't detect or read my CDFS file system external HDD

    Open Disk Utility and see if the USB drives show in there. If they don't then it is a USB port or bus problem. If they do show in disk utility are they formatted in either Mac extended or a Windows format?

  • My macbook pro can't detect the NAS after the NAS reboot.

    After I reboot the QNAP NAS, my macbook pro can't detect the NAS. I can't find the NAS drives in Finder even I input the new IP address. I remember my macbook pro was able to detect the NAS automatically before. Please help.

    Jp150981 wrote:
    . is the disk dying? should i just change it?
    Yes.  If you have a non retina MBP, look at some options listed here:
    http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
    Ciao.

  • My macbook pro can't detect USB drives

    my macbook pro can't seem to detect ANY usb drive. I have already selected to "show external disk/drive" on finder's preferences but it doesn't work. anyone with this problem and has a solution?? THANKS!

    Open Disk Utility and see if the USB drives show in there. If they don't then it is a USB port or bus problem. If they do show in disk utility are they formatted in either Mac extended or a Windows format?

  • MacBook Pro can't detect my projector. Only displays screen saver

    Tried connecting Optoma projector to new Macbook Pro. However only the screen saver is being displayed. When I go to Preferences - Displays - just says that no device is detected and gives no options to change anything. Did not have this problem with previous MacBook. Please help.

    Assuming the drive is not defective I would guess you didn't install it properly. Most likely the ribbon cable is not properly connected. You do know you must partition and format the drive? See the following:
    Extended Hard Drive Preparation
    1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Click on the Partition button and wait until the volume(s) mount on the Desktop.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

  • My new macbook pro can't detect wifi sometimes...

    hi guys...
    i just bought late 2011 macbook pro on 27 april this year...it was succesfully connect to any wifi at anytime & anywhere...
    but the problem begins when i stayed at my brothers's house...
    my macbook can connect to the wifi there for the 1st time, but after i shut down my MBP and turn it ON again, it cannot detect the wifi at my brother's house, but it's weird when it can detect wifis from neighbourhood...
    there' a solution for this problem...i have to repeatedly turn ON & OFF the wifi on MBP many times before it successfully connected...
    but unfortunately after shutdown & turn it ON again, i've lost the connection again...what i have to do is repeatedly turn ON/OFF the wifi on MBP AGAIN until it was successfully connected...
    pls help me, i already googled this problem but can't find the right solution anywhere...pls help me....thanks in advance....
    *additional note:-
    - my iphone4 & my ipad2 doesn't have the problem detecting & connecting to the wifi at my brother's house....
    - i live in malaysia, my iphone4 & ipad2 is malaysian version but my macbook pro was US version...

    Just finished trying the suggestion from my Mac store "genius", and it WORKED.  He suggested that I connect to the router directly with ethernet.  His thought being that once my MBP found the IP address it would be able to find the network wirelessly.  While still connected I went to System Preferences/Network, selected WI-Fi and entered the network info (name & password).  There it was - connected.
    Don't know how to make this solution available to everyone with the same problem.  If someone knows how, go for it.
    Thanks to everyone who responded.  Your efforts are appreciated.
    Jim

  • My retina MacBook pro can't detect the built in ssd

    I was restoring my MacBook using time machine but an error occurred and now when i boot up my laptop it enters OSX utilities but can't mount the SSD drive

    I could not open any of your links.
    Repair permissions & restart your computer.
    http://docs.info.apple.com/article.html?artnum=300832

  • After I installed Lion, my MacBook Pro can no longer detect my external hard drives or my USB flash drives. What should I do?

    After I installed Lion, my MacBook Pro can no longer detect my external hard drives or my USB flash drives. What should I do?

    And me -- My Mac at work running Snow Leopard reads the drive normally. My home Mac (on Lion) can't even find it....
    Yet another Leo let-down.....

  • MacBook Pro can connect via Airport but not iPhone or iBook G4.

    Anyone have any ideas? My Macbook Pro can connect to my Airport (v.7.3.1, 802.11n) but not my iPhone or iBook or a Windows Computer or WiFi Blackberry.
    The connection is strong and detectable by the ibook but "unable to connect".
    Somethings up with the settings but not sure what.
    Any ideas?
    HELP!
    thanks
    --K

    I've tried Channel 1,2,3,4,5 (still need to try the others)
    Secured or unsecured the only wireless connection that works is my MacBookPro.
    I get the message "unable to join network..." The connection is very strong.

  • My macbook pro can't "find" my disc (?!)

    I've just got the sims 3 island paradise and I've inserted the disc my macbook pro can't "find it". It asks me to insert the disc for me to be able to play when it's already in!? Why? Please help!!

    Call AppleCare (1-1800-APL-CARE) and give then the serial number.  They will send you a new copy of the two disks for shippingand handling of $16 each (I think $16 each).

  • Macbook Pro can't find my home wifi

    I just got my battery replaced.. All my data disappeared. The worst thing is, I can't find my home wifi network but my neighbour wifi network is available. Pls help me fix this.
    Mine is a MBP 2011.
    Your help is much appreciated!

    Hello, Sallyelainelee!
    You may want to check the settings on your Router to make sure there isn't something in its configuration that's preventing the MacBook Pro from seeing it. If the MacBook Pro can connect to other WiFi networks OK, I would imagine that this would be the case.
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    http://support.apple.com/kb/HT4199
    Best regards,
    Allen

  • Macbook Pro can't find Wifi after closing

    I moved house and got a new wifi provider. My Macbook Pro can't find it sometimes after I close my Macbook which forces me to restart for it to join the network automatically. SOMETIMES I get a popup window with networks that it picks up and SOMETIMES my network is listed and I can select that, but not all the time. Why cant my Macbook find my network sometimes? It can find everybody elses except mine!

    Wi-FI connection drops
    Wi-Fi Problems in OS X Yosemite
    Wi-Fi Problems in OS X Yosemite (2)
    Wireless Diagnostics
    Also try turning off Bluetooth.
    Troubleshooting Wi-Fi issues in OS X
    Wireless Connection Problems - Fix
    Wireless Connection Problems - Fix (2)
    Wireless Connection Problems - Fix (3)
    Wireless Connection Problems - Fix (4)

  • My iMac can't boot Windows 7 From USB while my Macbook Pro can do it

    I install Windows 7 64 bit and rEFIt into a USB hard disk and hope to boot from my iMac 27" (2010 Mid). However, it shows that no boot deivce is found.
    If I plug the SAME disk to my Macbook Pro 17" (2009 Mid), it can boot Windows 7 without any problem.
    I tried with Linux and get same result, iMac says no boot device while my Macbook Pro can boot it without problem.
    I tried experiment for weeks and still can't get iMac work.
    I think it is very abnormal and I wonder if someone can tell me how to fix it or any directory to solve this problem.

    My iMac runs snow leopard and my MacBook pro runs Lion. Both of them are updated with latest updated. I just get one external USB hard disk with Windows 7 32 bit installed and magically, my iMac can boot it from rEFIt. However, I don't know what makes it works. I tried to make same configuration, software and steps on other USB hard disks for hundreds times but I can repeat it again. All other attempt can make USB hard disk boot on MacBook Pro but not iMac only.

  • My macbook pro can see my home wi-fi network but cannot connect to it.  My iphone and ipad are connected to my home wi-fi so the problem is not the modem.

    Wow, I tried to submit this as a problem and the computer lost the wifi connection again, so i lost the whole explanation i typed up. 
    I've turned off computer and modem multiple times.
    When I tried to run the network diagnostic, the macbook pro gave me a "perhaps you are out of range error".  I am sitting next to the modem.
    My iphone and ipad are wonderfully connected to the home wifi network, so it cannot be the modem/router, correct?
    If I am on the same floor as the router/modem then the macbook pro can see my home network but after tyoing in my password and trying to connect i get a "timed out" message.
    If I move down one floor, then the macbook can see and connect to the wifi.  I only have one modem on one floor.
    Is there some sort of diagnostic I can run to see why this particular device (macbook pro) is behaving ths way?  It just seems weird because the computer could connect to the wifi network yesterday while i was sitting next to the router. 

    SOLUTION! 
    I've been suffering from this problem for a few months.  I tried everything suggested by everyone, and then, today, I had a mad idea. 
    I used to work in a room in the house that's about 12 metres away from the router. It's on the next storey up and horizontally about 8 metres away.  The problem started when I began to work in the same room as the router. 
    Today I became so frustrated that for some reason I walked into a room about 8 metres away on the same level - Guess what?  I connected with no problem at all. Feeling full of joy I walked back to the room where the router is located - Dropped internet connection within a few minutes!  Walked back to the the room that's 8 metres away and, hey presto! I have a connection. I now realise that the problem was that I moved too close to the router.
    I can think of no logical explanation for my experience, but empirically it seems to work.  Does anyone have the faintest idea of why this should be the case?  In the absence of an answer I think I may have to start believing in fairies at the bottom of the garden - I'm just off to set a meal for them.
    By the way, I don't know if it has any significance, but the router is a BT Infinity router that has replaced the incredibly unreliable Virgin Media cable connection

  • My macbook pro no longer detects my camera.

    My macbook pro no longer detects my camera.
    After downloading thousands of photos, my mac no longer sees my camera.  Nothing has changed.  I have tried restarting the mac, using fresh batteries, different usb ports. When I try to download photos, iphoto opens up on it’s own, but my camera does not show up.  Neither does it show up in any finder window, or under disk utilities.
    mac os x 10.6.2
    Nikon D90
    Any help would be greatly appreciated. 

    Try Reset SMC.   http://support.apple.com/kb/HT3964

Maybe you are looking for

  • Macbook to LG television via hdmi - can;t get it to connect

    HelloI I have borrowed a friend's cables to see if I can connect my macbook to my LG television. I have the apple mini DVI to HDMI cable and the belkin HDMI to DVI cable and the television tuned to hdmi1 channel - there is only one hdmi port but i've

  • Change Icon Size on Desktop?

    I've done something (but not sure what!) to change the size of the icons on my desktop (plug in USB drive, harddisk, etc icons) they are all tiny - barely as large as a single letter in the text underneath the icon. I cannot see any setting to adjust

  • MM-SUS Limitations

    Dear Experts, I have observed following limitations in MM-SUS. please let me know my assumptions are correct or not? Apart from that if any limitations in MM-SUS then please let me know. 1) Purchase Orders in MM SUS Scenario must always have POR & AS

  • Upgrading to OS X Server 2.2 Results in Errors

    After upgrading to the new Server 2.2 app today, I received the following warning once the upgrade process had completed: An error occurred while updating your service data. Services may not function as expected The, opening the Server app, I receive

  • Restricting Material Type in MM02

    Dear All, I have a requirement from restricting access to material type in Transaction MM02. We have the Auth Obje M_MATE_MAR to restrict the Material Types. However, the Material Types needs to be restricted by Authorization Group. We get the below