1315 series all in one printing problem

Hello,
the printer suddenly won`t function.I asked to print a pdf document, but the function won`t start.
In the status bar it says 3 pending documents, because i asked 2 more times to print this document as it woudn`t start.
I have tried to cancel them and start again but no luck. I also can`t figure out if there is a way to delete them ftom the que.
Anyway I need this printer to start working again?
Any suggstions?
Thanks in advance!

I would suggest downloading and running the HP Printing Diagnostic Utility. If that does not resolve the issue then please provide some details - is this the PSC 1315 or some other model? What operating system?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

Hp 8600 All in one printer problem with scanning through wired network its very slow!

Hi
i have problem with scanning thru network which takes almost more than 2minutes very slow compared to scanning when printer connected locally with USB. i need some solution to fix this issue. Plz advise me what needs to be done prior to scanning?

Welcome to the community @Larrypat
I understand your printer is not connecting wireless and only connecting USB. I have some questions and ideas for you that should help. Let's get to it!
Could you please remove the USB cable, run the Print and Scan Doctor again and send me a screen shot of the results from running the diagnostic tool?
Also let me know which model from the C7200 series you have:
HP Photosmart C7250 All-in-One Printer
HP Photosmart C7280 All-in-One Printer
HP Photosmart C7288 All-in-One Printer
Try power cycling the network devices:
Turn off the printer and computer and unplug the router for 1 minute (do not press any buttons on the router).
Plug the router back in and wait another minute, next turn on the printer and computer. Run the Print and Scan Doctor afterwards and try printing.
Let me know how it goes and the results
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP Deskjet 2540 Series All in One Printer Offline

Ok so I have had this problem for what seems like forever now. This has happened multiple times, and I always have had to use online HP tech support to fix it, but this time I don't seem to have that option. My printer says that the status is offline, and I really need to print something. I have gone through the forums, tries multiple different answers that multiple people say will work, and nothing has worked so far.

HI , Welcome to the HP Support Forums! I understand that you're having issues with your HP Deskjet 2540 Printer going offline. I would like to look into this with you. There are many reasons why this might be happening, is your printer connected wirelessly? Important! Do you turn your printer off between uses? If your printer is connected wirelessly, I recommend you always leave it on so it stays connected to your wireless network. Otherwise, it will lose the wireless network configuration and will need to be setup again and again. To determine which of these documents is suited to the problem, it will depend on whether your wireless light is blinking or is solid. If your wireless light is blinking, then it is no longer on the wireless network. Follow this guide, HP Deskjet 2540 and HP Deskjet Ink Advantage 2540 All-in-One Printer Series - Printer Does Not Maintain Wireless Connection. If the wireless light is solid, than it is still connected the wireless network. Follow this guide, HP Printers - 'Offline' Printer Status Message Displays (Windows 8). What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
Please respond to this post with the result of your troubleshooting. I look forward to hearing from you. Good Luck!

Deskjet 3050 A e all in one printer problems printing from ipad

my ipad is connected wirelessly through the WPS set up to a ZyXEL router.
can't connect desk jet 3050 Ae all in one printer to the wireless network. Ipad can't find printer and print
Can you help and give detailed instruction how to set up?

In order to set the wireless connection, you should use the Software from your PC.
You will be prompted to temporary connect a USB in order to configure the printer.
If the sofware is not yet installed on your PC, follow the instructions below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02722113&cc=us&dlc=en&lc=en&product=5061082&tmp...
If you already completed the software installation, you may find the wireless configuration as following:
1. From the computer’s start menu select All Programs or Programs, and then select HP. 2. Select HP Deskjet 3050A J611 series 3. Select Printer Setup and Software Selection 4. Select eighter Convert a USB connected printer to wireless or Connect a new printer and Follow the onscreen instructions.
I was an HP employee.
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks.

1350xi All-In-One Printing problem

I've had a 1350xi All-in-One printer for a long time, and just recently it began printing the test page (for aligning a new cartridge) every time it is turned on. It doesn't seem to matter if it is connected to a computer or not. How can I change this?

scan the alignment sheet immediately after it prints, and that should complete the alignment process. then, the print will stop printing it until you replace the cartridge again.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

Unable to connect my 1300 series all in one printer

the connect and update buttons from the pull down menu are disabled and i don't know why or how to enable it again. I have one print job in queue that will not restart!!!! please help. thanks in advance!

Greetings pbdq,
As the user above stated, you should remove the previous software used.
When you go to re-add the printer, it may download the software you need via Apple Software Update.
However, if it does not, use the link above.

HP PSC 1315 All in one printing problem

My printer only prints text in red in the body. It will print black along the top and bottom of the paper. It also prints in black when I copy something. I put in new fresh cartridges. What can I do?

What program are you printing from? It would appear your are printing in graphics mode (rather then black text) and that your printer is running out of cyan ink.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

HP C309a All in one Printer - Problems with printing documents the correct size.

Hi I recently purchased an HP 309a as a replacement for an EPSON printer which had to be replaced a couple of times so I thought I would change manufacturer.
The HP printer prints well in post places but when I print from Excel on an A4 scale it only prints 3/4 size on an A4 page. I tried everything to get it to print the correct size. I have adjusted the settings to scale to A4, print boderless etc and it just will not print correctly.
It seems to be ok in Word and many other programs so I don't know why there is an issue with Excel. Iam I missing something, please help.
Also is there any way to default the printer to A4 automatically instead of 8" x 11".

I also have issues using this printer with Excel/ Word.
When I am using Excel or Word I have to remove the HP 309a as my default printer.
when set as default, excel and word just "hang" for up to 3 minutes when opening or saving.
I called HP who said the printer works with all other files so basically it's tough. One of their tech guys tried to sort it out but couldn't.
Has anyone else had this same problem? If so, how was it resolved?
£300 for a printer that doesn't work with MS. It's not funny and I won't buy HP product again.

HP Officejet 4630 e-All-In-One Printer problem

I have installed all the software and ran all the tests and all areas pass. Test printing comes out just fine. But when I try to send something to the printer, nothing happens, the printer just sits there. Does anyone know what the problem might be?
This question was solved.
View Solution.

I still don't believe this, but I took a chance and pulled the USB out, then plugged it back in. It worked.

HP 4622 All in One Printer: Problem with Printer or Ink System

Problem with Printer or Ink System Error OXC19a0027.

charleshia wrote:
Thanks so much for replying to my post. I tried the fist suggestions and they did not work. So, I attempted to move on Dow to the cleaning of my printer. I am the the first to admit that I'm not the genius when it come to electronics buys, my printer do not seem to have what is described in the photos. I'd like to upload a photo of my ink cartage but do not know how.
Charleshia, you can upload a photo here to reply. Click Reply, then on the window you'll see the image below..
click the one which has the red box, it's where you insert the photo
Going back on your issue.. the basic step would be.. take out the inks then close the door... what error message you got? If it's saying "Missing Ink Cartridge" just hit OK. Unplug the power cable at back of the printer, plug it back in.. Clean the copper contacts on the ink cartridges using a lint free cloth then reinstall them. Let me know if it resolved it or not.. I can only give basic troubleshooting here

7410 All in one printer problems with working all of a sudden.

My printer seems to have disappeared from my printer list. I have removed the software and re-installed, it sees the printer but nothing shows up in the printer list like it used to. I have set it on a static IP on a wired network. I started running the HP tech assistant and it failed on the Windows item 3rd in the list. The first 2 items passed. It said to power cycle both printer and computer. Did that and same error again. I can't re-run that thing right now but it starts doing things with the scanner when I try to run its fix part of the program and that is where the error comes in. I can't scan, print or fax from the computer any more. I have other computers here and the software works on them so it is something within this machine. Only software added was PC Speedup from the web. Seems to match that time frame when it was put in. It resolved other problems I was having but seems to have screwed up the HP software.
When I try to re-install the software file (latest from the web site) it sees the printer IP, asks if it is the one I want to install which I answer yes to and it goes on its marry way finishing the installation but nothing shows in the printer list after it is done or after it is rebooted.
Any ideas on what to do next?
Don.

Hello dh-agi,
It sounds like that PC Speedup certainly messed something up (probably in the registry). You may have to do a system restore to a point in time before you did so.
However, before you do that, I recommend 'scrubbing' the existing printer installation(s) and starting 'fresh'. To do this, follow the instructions below:
If you are installing from Original installation CD:
1. Insert CD into drive, and then cancel the installer
2. Open My Computer, and then right click on the CD drive and chose open
3. Open folder Util
4. Open folder CCC
5. Run the L4uninstall (unless you have an HP PC, then run L3uninstall)
6. When the uninstall has completed restart the computer
7. Run Disk cleanup from Accessories\ System Tools
8. Download and install the latest version of Adobe flash player using the link below
Adobe Flash Player
9. Download the latest full feature software and drivers using the link below
http://goo.gl/q2hE0
10. Run the download to reinstall the printer
If software was downloaded and extracted to your system:
1. Hold the Windows key + r key, type %temp% in the run field, then hit Enter
2. Look for, and open a folder starting with 7z (Example: 7zS2356)
3. Open folder Util
4. Open folder CCC
5. Run the L4uninstall (unless you have an HP PC, then run L3uninstall)
6. When the uninstall has completed restart the computer
7. Run Disk cleanup from Windows System Tools
8. Download and install the latest version of Adobe flash player using the link below
Adobe Flash Player
9. Download the latest full feature software and drivers using the link below
http://goo.gl/q2hE0
10. Run the download to reinstall the printer
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

HP PSC 1410 All-In-One printer problem!

I have a PSC 1410 for a while now and I reinstalled Windows 7 recently and now the printer's not detected but I can scan documents. What could be the problem? It was working fine before I reinstalled Windows 7 and I've obviously installed the drivers.

Click here for troubleshooting tips for blinking lights on the PSC 1400 series printers.
Regards,
Bob Headrick, Microsoft MVP Printing/Imaging
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Hp-psc 1317 all-in-one printing problems

I have a hp psc 1317 printer scanner. It is connected to my laptop running Windows Vista. Recently the print quality diminished until now when I print a document it sounds like printing is happening but there is no mark on the paper whatsoever.
Today I downloaded and installed the HP Solution Centre software. My ink levels are pretty full and when I attempt a test document the software doesn't seem to think there is a problem although still nothing is printing on the paper.
I am completely confsued as to what is causing this problem. The only thing I can think might be connected to the problem is that in the printer window of the control panel two printers are showing: hp psc 1310 and hp psc 1310 (copy 1). I'm not sure why the printer has been listed twice but I have chosen each printer in turn and attempted to print a document. When the 'original' printer is selected nothing is printed at all but if I select the 'copy' printer it goes through the process described above.
There is obviously not a problem with ink levels and the printer and computer are communicating but something somewhere is going wrong and I'd love someone's help if at all possible.
Thanks so much
Chris

This article should help resolve your blank pages:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01892627&cc=us&dlc=en&lc=en
Give the steps listed under your operating system a try and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

2410 all in one printing problems

I have an hp psc 2410 and I have issues attempting to print. When I select 'print' on my pc screen I get a pop up type message that says it is ready to send fax. It will not print because of this fax attempt rather than print. Any ideas how to solve this issue?

hi,
I believe this happens because the default printer is set for the fax. You need to switch the default printer to the printer icon that doesnt say about fax.
for windows 7 click start menu>devices and printers
for vista: click start menu>control panel>printers
for xp: click start menu>control panel>printers and faxes
Then, right click the HP PSC 2400 Series and then select set as default printer.
HOpe that would help you!
Kiko

Psc 1310 all-in-one printer problem

Every so often my psc1310 printer goes into "Deleting..." when it is instructed to erase a message. Disconnecting, closing and reopening the computer, etc., does no good. It usually requires uninstalling and reinstalling the printer program to get rid of the problem.
Is there a more convenient way of solving it?

Hi,
Check the link below:
Scanning with HP Director Software in Windows XP
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

1315 series all in one printing problem

Similar Messages

Maybe you are looking for