1315v All-in-one Solution center app not available in Windows 7 ?

Just got windows 7 and the HP Support and Drivers doesn't have the same Solution Center sw available.
I loved the way it worked in Win XP.      Pls tell me where it is located.

hi khan2000,
Welcome to Lenovo Community Forums!
Can you post here the Hardware Id of the Wireless Device
     - In device manager Wifi device should show like Network controller with a yellow Icon.
                -Right-click on it and choose properties.
                -Click on the details tab on top
                -Change the property Value, change it to Hardware ID
                -then paste back here what's on the Value
Link to sample photo
This will help us the Name of the WIFI and will guide us on downloading the right driver
Solid Cruver
Thanks,
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

  • Email settings in J4580 All-In-One Solution Center

    Hi there,
    For some time i use my all-in-one J4580 printer with the Windows Vista application on my computer.
    But recently i change and did run an upgrade to the Windows 7 application and everything did goes verry well without any problems accept for one detail: when i have to scan any document and send it with the mail application in the Solution Center it will use the old Windows mail application from Windows Vista and send it to the destination of my choise.
    Only the problem is that i can't run that email application within my Windows 7 and i can't find the delivered mail because the Solution Center still uses the Windows mail from Windows Vista. Windows 7 support only Windows Live Mail and i can not set this in my Solution Center of the J4580 All-In-One printer. Verry strange that the Solution Center still can use the Windows Mail application from Windows Vista on an Windows 7 32bits running application on my desktop.
    My question: how can i change the mail settings in the Solution Center of my J4580 All-In-One printer?
    I have not found it in the HP Support Forum and the warranty is expired, so i can't send a mail to the support center of HP.
    I will be grateful if someone has an solution for this problem.

    Hendrik wrote:
    Hi there,
    For some time i use my all-in-one J4580 printer with the Windows Vista application on my computer.
    But recently i change and did run an upgrade to the Windows 7 application and everything did goes verry well without any problems accept for one detail: when i have to scan any document and send it with the mail application in the Solution Center it will use the old Windows mail application from Windows Vista and send it to the destination of my choise.
    Only the problem is that i can't run that email application within my Windows 7 and i can't find the delivered mail because the Solution Center still uses the Windows mail from Windows Vista. Windows 7 support only Windows Live Mail and i can not set this in my Solution Center of the J4580 All-In-One printer. Verry strange that the Solution Center still can use the Windows Mail application from Windows Vista on an Windows 7 32bits running application on my desktop.
    My question: how can i change the mail settings in the Solution Center of my J4580 All-In-One printer?
    I have not found it in the HP Support Forum and the warranty is expired, so i can't send a mail to the support center of HP.
    I will be grateful if someone has an solution for this problem.
    Hendrik wrote:
    Hi there,
    For some time i use my all-in-one J4580 printer with the Windows Vista application on my computer.
    But recently i change and did run an upgrade to the Windows 7 application and everything did goes verry well without any problems accept for one detail: when i have to scan any document and send it with the mail application in the Solution Center it will use the old Windows mail application from Windows Vista and send it to the destination of my choise.
    Only the problem is that i can't run that email application within my Windows 7 and i can't find the delivered mail because the Solution Center still uses the Windows mail from Windows Vista. Windows 7 support only Windows Live Mail and i can not set this in my Solution Center of the J4580 All-In-One printer. Verry strange that the Solution Center still can use the Windows Mail application from Windows Vista on an Windows 7 32bits running application on my desktop.
    My question: how can i change the mail settings in the Solution Center of my J4580 All-In-One printer?
    I have not found it in the HP Support Forum and the warranty is expired, so i can't send a mail to the support center of HP.
    I will be grateful if someone has an solution for this problem.

  • Software for HP solutions center is not compatable with windows 7

    I bought a HP note book pc with windows 7 64 bit operating system.  I'm using a HP officejet 4315v all in one printer that works perfectly using the driver detected by windows 7 installed using the USB cable.  Previously I had installation software for the HP solution center program that worked with XP and Vista.  When I tried to install the software in  windows 7 I received the message telling me it was incompatable with my operating system.  There seems to be  according  all my research in the HP system no updated software to use Window solutiions center with Windows 7 64 bit operating system.  HP says there is a work around that will open the toolbox in order to check ink levels but not much more.  It doesn't work.  I know microsoft 7 provides a way to scan and fax but HP solution center was by far better.  Are there any solutions I might have misses or suggestion?  I would appreciate any help given. TIA

    The only solution for the officejet 4315v is the in-OS driver in WIndows 7,  there is no full feature software availible for this printer in that OS.
    I was an HP employee
    If I have helped you solve your issue please mark it as solved
    **Say Thanks By Clicking on the Kudos Star**

  • Lj cm1415 All-in-One printer software will not install in Windows XP

    Have windowsxp and no problem with my printer and scanner, lj cm1415fnw, then the scanner stopped working.
    my IT guy uninstalled and now we can't install. Error message, does not support this windows software?
    It did before, Help please
    thanks Terry

    Hi Terry,
    Try installing the latest drivers below:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=kj-85658-7&cc=us&dlc=en&lc=en&...
    As well ensure you have full administration rights to install the software, a such may appear due to insufficient permissions of your user account.
    Hope that helps,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Officejet J4550 All-in-One Software and Drivers not supported in Windows 7

    Windows 7 (automatic) and I (manual download from HP site) tried to install the printer driver software (64 bit system) and got an error software not supported. Went to the windows update site and the Officejet 4500 series was not listed. Is there any solution to this problem?

    Run the install .exe file in compatibility mode for Vista SP2. Can someone explain to me how to do this?

  • HP Photosmart Premium all-in-one C310a printer, Solution Center will not stay installed.

    It seems lately, past month or so, that the HP Solution Center keeps failing and needs to be reinstalled.  I get a message which says:" HP Solution Center cannot run because your device installation is not complete." followed by a list of steps to take to remedy the situation, which do not work.  I have to uninstall and reinstall the printer and then it will work, but after I shut the computer down for the day or run a virus scan (PC Matic) the problem returns.  Can anybody help me? 

    Hi @oboe1827,
    Welcome to the HP Forums! 
    I see that your HP Solution Center will not stay installed for your HP Photosmart Premium c310a printer. I am happy to help you resolve this issue!
    For further assistance, I will need some more information:
    If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
    If the printer is connected, Wireless, or USB.
    If the printer is able to make copies.
    If you are using Windows, please try the HP Print and Scan Doctor, and let me know what happens!
    Hope to hear from you soon!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • 'Unknown device' in Lenovo Solution Center, but not in Device Manager

    Even with all the latest updates installed, I still get this annoying warning from Lenovo Solution Center
    'Unknown device' - status 'not installed' 
    Control Panel / Device Manager gives no signals something is wrong.
    why?!
    Details:
    Computer: Thinkpad Yoga (TPY)
    OS: Windows 8.1 all updated
    Lenovo Solution Center version: 2.2002 / revision 17630
    External device attached to TPY:  OneLink Pro  (also has latest driver = Realtek 8.10.1009.2013)
    Thanks in advance
    Olof

    henk wrote:
    It seems to me you are missing some update from Lenovo. I had the same issue, however just recently after updating any available software/drivers for the TPY the message has disappeared.
    Glad to hear the problem is solvable. Regarding missing updates, I honestly would not know which one. 
    Lenovo's own update programs ('L-Update and Drivers' & 'L-System Health and Diagnostics') inform me that all drivers are up to date.

  • With my hp office 5010 all in one printer, i'm not able to scan, and this is one of his duties. why

    with my hp office 5010 all in one printer, i'm not able to scan, and this is one of his duties. why isn't it possible?? Bad ssoftware while downloading it from internet because I lost CD rom. No pilot available for scanning with it??? Bad version of soft??? I bauught this printer because of his utility and space occupped: able to print, copy and scan in  same machine, gain of room, perfect, but my scanning function is not working!!!! I would like to solve this damned problem which upset me since several weeks.... Waiting for an answer and a solution,  best regards

    pmonteil31 wrote:
    Waiting for an answer and a solution,  best regards
    Hi,
    Sorry you have to wait longer because I can not find your printer model under Google. Must be very old ?
    Regards,
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • C6280 HP Solution Center will not run or install

    I have been using my C6280 on my home network for years with Solution Center intalled on a desktop running Vista andtwo laptops running Windows 7 with only the print drivers installed. HP Update was eanbled on the desktop.
    In the past two or three months, I started to get a number of error messages on my desktop indicating there was something wrong with Solution Center. The issue steadily worsened to the point where Solution Center would not run at all (unable to detect device seemed to be the most recurrent message) and I was unable to run the scanner.
    I was able to maintain printer fnctionality by deleting and then adding the printer through Windows, although I seemed to be forced to do this every few days.
    I went on the forum and decided the best course of action to restore full functionality was to uninstall all HP software and then download/install the software suite. I downloaded the Vista 32 bit version  (100_228_PS_AIO_02_Full_Net_enu_NB.exe) andI tried installation several times with no luck - the installation always seemed to get stuck immediately after extracting files.
    I went back on the forum and found out how to do a level 4 uninstall from a temp folder beginning with 7z... . I did that and tried again (after checking that my Adobe Flash was up to date).  The install went a little further this time but eventually stopped again. File not found.  I ran the installation .exe from the temp file and went a little further but stopped again. An error log was created and a 'fix' was placed on my desk top. I followed the instructions but the 'fix' did nothing (it was just a text file - nothing to run that I could decypher). Just to make sure I was doing it right, I repeated the entire uninstall/download/reinstall process two more times with the same result. 
    The above process was beginning to remind me of Einstein's defiition of insanity (do ing the same thing over and over and expecting different resuts) so I gave up and successfully downloaded and installed the printer drivers to restore print functionality.
    How do I get my scan functionality back?
    Thanks
    This question was solved.
    View Solution.

    Hi,
    May you have McAfee Antivirus on your PC?
    If so try following the steps belwo and let me know if that may help:
    1. Open Mcafee software, from the Virus and Spyware Protection section click on Schedule and run scans. Click on Real time scanning and then on Turn Off. select Never and confirm by clicking the Turn Off button.
    2. Open the run dialog by clicking both the Windows key and the R key on your keyboard. Type %windir% and click on OK.
    3. Type hpoins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpoins1.old)
    4. Type hpwins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpwins1.old)
    5. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /UNREGISTER into the Run dialog and click on OK.
    6. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /REGSERVER into the Run dialog and click on OK.
    7. Reboot your PC
    8. Run the installation file and check for any difference.
    9. Once you are done, be sure to open McAfee and re-activate Real Time Scanning.
    If the issue persists, please clarify what security software you are using,
    As well open the device manager and expend the Processors category - what processor you have on your PC?
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • My HP Pavilion 23 touchsmart all in one touch screen is not working

    My HP Pavilion 23 touchsmart all in one touch screen is not workin. I have restored the system. I didn't see any place in the pen and touch to disable or enable and not sure if i should instill drivers. What can i do?

    Hello @junk4are,
    I understand that you are having issues with your HP Pavilion 23 Touchsmart Desktop PC's touchscreen and are wondering if you should install your drivers. I would certainly recommend that you do so. I would be happy to assist you, but first I would encourage you to post your product number for your computer as there are various versions of the HP Pavilion 23. I am linking an HP Support document below that will show you how to find your product number. As well, if you could indicate which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this and the product number I can provide you with accurate information.
    How Do I Find My Model Number or Product Number?
    Which Windows operating system am I running?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • HP Officejet Pro L7590 Printer - HP Solution Center does not work

    I am not able to get the Solution Center suite to work because the installation has an error.  I am using Windows 7 Home Premium.  The printer I am installing is the HP Officejet Pro L7590.
    If I go to Devices and Printers and add the printer.  The driver Windows 7 driver would work, it would detect the printer and the test page and everything would be fine. 
    However, if I install using the software provided by HP for the L7590 it would result in an error and it would not work. 
    The failed driver installation is only from installing the full bundle software provided by HP, if by itself through Windows 7 it would be fine.
    Because of the failed installation using HP software the HP solution center does not work.
    In Devices and Printers, the printer has the yellow exclamation point requiring troubleshooting, I click on troubleshoot and no device drivers were found.  In addition, I could not remove the printer.  Before installing the HP software, I could successfully install the printer and there would be a green checkmark, and there would be an option to remove the printer.  This leads me to believe HP has a faulty software bug that is causing the error.
    I am suppose to use the HP add a printer shortcut that populated on my desktop after installing the software, the first time it would show the failure to successfully install the driver, afterwards it would not even detect my printer if it is plugged in.  If I remove the usb and reinsert it, the Windows would just show the failed driver.  I repeat, it failed after I install the software, it works fine without.  The primary reason I want the software is to use the scanning feature.

    Hello NickRT, and welcome to the HP Forums, I hope you enjoy your experience!
    I see you are having software installation issues.  i would like to try and assist you.
    I would suggest Uninstalling the Printer Software.
    Once it is uninstalled, I would suggest putting your system into clean boot mode within the Microsoft configuration.  You can do so by following this document: How to perform a clean boot in Windows.
    Once the computer is in clean boot mode, I would reinstalling the HP Officejet Pro Full Feature Software and Driver.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • BI and the all in one solution

    Hi
    We have a situation where we we hqve many clients attched to one central  BW system and then some customers wish to have a local installation (which we dont want to do due to many systems etc). So we are looking at the SAP ALL in one solution and i have been ased the question how easy will it be to just copy the existing production client in the central solution and use this as a template.
    I have raised potential problems such as:-
    we have many clients in the central one and we dont need these in the all in one just one for each client
    many objects that we have in production thatis not needed
    unwanted and old data flows (yes we havent cleaned it in a while)
    however, can anyone else shed any light on the issues here. Please note thta is is not an alternative to reduce the client numbers in the main system etc.
    Regards
    Andrew

    Hi,
    Please check the following link first:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c04473034&tmp_task=prodinfoCategory&cc=us&dlc=en...
    and the following link shows how to install new patch:
      http://h10025.www1.hp.com/ewfrf/wc/document?docname=c04469325&tmp_task=useCategory&cc=us&dlc=en&lc=e...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Since I downloaded Snow Leopard on my iMac, my HP all-in-one C7280 scanner will not work. It says "scanner not found, scanner could not be initialized".  Any ideas?

    Since I downloaded Snow Leopard on my iMac, my HP all-in-one C7280 scanner will not work. It says "scanner not found, scanner could not be initialized".  Any ideas?

    Hi,
    I suggest uninstalling the printer drivers from your HP printer. The go to System Preferences> Printer & Fax and in the printer list box go ahead and reset the printing system. Do that by right clicking over the printer list box ad the option should appear. After that close system preferences and reinstall your printer drivers from the HP CD. After installation check if your printer works as expected, if it does, stop here and ignore the rest of the message.
    If you don't have the install CDs for the printer or the previous step does not work; connect your printer to your Mac via USB and then again go to system preferences. Open the Print & Fax menu and in the printer list box you should see a "+" sign. Click on it, and a new window should appear with a list of printers that are available to you. If that's the case, go ahead click your printer name and wait for the computer to look in the Apple servers for the drivers. When searching is finished click the "install" button. This process will open software update and install the neccesary drivers.
    After that, you should be able to scan documents with the Preview App.
    For more information on the printing system in OS X Snow Leopard visit:
    http://support.apple.com/kb/HT3771
    Hope this helps!

  • Solution center will not recognize J4680 in wifi

    My J4680 will print a document in wifi so I know my computer and printer are communicating.  I have reinstalled the software and I am still able to print.  However, when I open HP Solution center to check ink level or scan an item it will not recognize the wifi printer.  It will recognize it as if I have the USB connected.  This defeats the purpose of having wifi options if I cannot communicate with the printer except to print.  I cannot even run diagnositics like cleaning printer heads etc because HP Solution center will not communicate via wifi.  Solutions?

    That link is not working for me at the moment either @judomax , perhaps if you wait it out for a few hours or a day it will be back up and running. It is possible there are changes being made to the page. It would be nice it if said "under construction" or something of that sort, but in the meantime I guess we sit and wait.
    I will keep you posted if the link is no longer valid and the Print and Scan Doctor link changes. I will keep an eye on it.
    Thanks for letting me know.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g can not define a custom size paper.

    HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g can not define a custom size paper.  I would like to have a custom size to work with a card making program.

    Can you help me out?
    I have an HP Officejet Pro 8600 N911a
    When I try to print to a custom print size (2.75" x 6" in my case), I get the same error everyone else is reporting: "Paper detected does not match paper size or type selected. Make sure the paper size or type is correct to continue the job."
    I am currently trying to print using Microsoft Word for Mac 2011 version 14.4.5, but I have the same problem with printing from Adobe Reader 9.8.5 or Preview 8.0.
    I am running OS X Yosemite 10.10.
    My printer's firmware is "up to date" as of 28-Aug-2014.
    This is what I did:
    1. Open System Preferences from the Apple menu.
    2. Click on the Printers & Scanners icon.
    3. Click on the + sign under the list of printers to add a printer
    4. Click on IP
    5. Enter my IP address in the Address field (verified as "valid and complete host name or address")
    6. Ignore Protocol field (default is Line Printer Daemon - LPD)
    7. Ignore Queue field (default is blank for default queue)
    8. Ignore Name field (default is IP address)
    9. Ignore Location field (default is blank)
    10. Under the Use dropdown menu, I select "Select Software"
    11. HP Deskjet 9800 is not an option.
    I searched for 9800, but there is no HP printer with that number in the options.
    I tried selecting "HP DeskJet 980C - Gutenprint v5.2.3" to see if that would work, but I received the same error message as above. I tried selecting other random HP printers, but so far I've had no luck.
    I've been googling about for a way to manually add a printer driver to this "Select Software" list, but I've found nothing (apparently, no one else wants to do this). I did not find a driver download for the HP DeskJet 9800 for OS X Yosemite 10.10 on the Drivers & Software section of the hp.com website.
    Additional details on settings for Microsoft Word for Mac 2011 version 14.4.5:
    Selected File > Page Setup from menu
    Under the Paper Size drop down menu, I selected manage custom size.
    - Click + to add a paper size
    - Enter "2.75" in width and "6 in" height in the paper size fields.
    - Enter "0 in" as the User Defined Non-Printable Area for top, left, right and bottom.
    - Double-clicked Untiled in the custom size list and rename the size as Receipt
    - Click OK to return to the Page Setup dialog box
    Under Settings: Page Attributes:
    - Format for "HP Officejet Pro 8600"
    - Paper size: Receipt
    - Orientation: "tall/portrait"
    - Scale: 100%
    - Click OK
    Select Format > Document and set all page margins to 0.25"
    Thank you. 

Maybe you are looking for

  • Gif files not moving

    Aloha all, can anyone tell me what program I need to make animated gif files animate? When I download any animated gif files they don't move. When I open in Preview all pics are there, they just don't play. Any advice on how to make them move like th

  • How do I import photos from iPhone to PC?

    How do I import photos from my iPhone 3G to my PC (either desktop or iTunes)? I have over 200 photos to import.

  • HT204400 Issues with Apple TV

    My Apple TV won't connect to iTunes tonight.  Is there a problem with iTunes in Australia?

  • Consider the previous record i on-commit

    Hi, I wrote a trigger on-commit: if :SYSTEM.CURRENT_BLOCK='SQTIPO' then if :SQTIPO_DET.MANSIONEC is null then      message('Making the data on SKILL.');      message('Making the data on SKILL.'); end if; end if; commit; but if I move within the first

  • 3rd Party Plugins for Flash CS4

    Are there any resources to find 3rd party plugins for Flash CS4?  I've used plugins in older versions of Flash, but I'm new to CS4.  I'm wanting to a lot of cool things with a site including photo carousels, image transitions, visual effects, etc., b