1366 X 768 16:9 question

I just bought an LCD TV with a 16:9 widescreen 1366 X 768 resolution. What do you have to do to achieve this widescreen resolution? I have the ATI 9600 256mb graphics card that doesn't have this resolution native. The screen appears to be stretched. Do I need the Apple Cinema Display graphics card? Any suggestions....?
G5 dual 2.3 Mac OS X (10.4.6) Logic Pro

If you're trying to display your G5 output on an LCD TV you might want to give SwitchResX a try.
http://www.madrau.com/html/SRX/About.html

Similar Messages

1366 x 768 Plasma TV

I'm considering buying a Mac Mini (1.66) to hook up to my 50" Panasonic Plasma with resolution of 1366 x 768. I've searched some old posts, and seems there are lots of questions/problems about getting this resolution. Is this still a problem? Is there a solution now?
I plan on using a DVI to HDMI cable to hook up my TV via my HDMI input.
Thanks in advance!

Well it's not a problem for the mini anymore. Since the Intel mini, 1366 x 768 is a possible resolution. The G4 mini could not hit the 1366 value because it isn't evenly divisible by either 8 or 4, which was a requirement of the ATI graphics chip inside the G4 mini.
But the real question is what will your Panasonic TV do when it encounters this timing? A lot of TV sets expect only ATSC formats like 480p, 720p and 1080i. If you feed them a resolution like 1366 x 768, even though it may be the native resolution of the panel, they get tripped up by it and either don't show an image or else show an image but it is distorted and not the expected bit-for-bit mapping.
Have you tried hooking any other computers up to your plasma TV? If yes, what resulted? If you have been able to get other computer to display native on the Panasonic, then I would say the mini should work fine.

T510 max screen resolution is 1366 x 768?

Hi anyone,
Got a new T510 and the mex screen resolution I can get is 1366 x 768?
Is that correct?
I have been using 1680 x 1050 on T61 so I feel like I;ve gone backwards in 3 years.
Does anyone know ho I can get a higher res?
mkozma

Hi and welcome to the forum!
What is 7 character product number of your T510? It looks like 2668-KHU and can be found on the bottom sticker, please don't post the S/N, thanks!
Keep us posted.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

X1 - release date? display option 1366 x 768

News of the X1 is popping up in several places... and it looks interesting, but may miss the target.
Question - when will it be availabe in North America?
Display comments
- The display is a CRITICAL component for many buyers
- 1366 x 768 is pathetic. I expect at least 900 pixels of vertical resolution
- IPS > Gorilla Glass (iPad, T42, etc)
- I prefer matte > glossy (luckily thinkpads are usually matte)
- 300 nits (so I can work outside)
I am not alone. Many are shopping for an ultraportable with a quality high resolution display (1440x900 or 1920x1080).

hey oceanus,
for this, i would recommend calling the sales team via the number listed in the link below
http://www.lenovo.com/contact/us/en/
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Thinkpad T430 Display: HD (1366 x 768) vs. HD+ (1600 x 900) Specifics

Hello, and thank you in advance for any help. As I've researched the Lenovo ThinkPad T430, and it's various configuration options, I've found specific information on the differences between the HD (1366 x 768) display and the HD+ (1600 x 900) display to be rather lacking. Everything I've read boils down to "go with the HD+ if possible" but I was hoping for more information. I'd be using the laptop for reading documents and web pages, as well as viewing movies, so I was wondering if more knowledgeable people than I would pipe in with their opinions, especially when it comes to watching movies on the laptop (in a dark room with the laptop at the foot of the bed and using headphones). Thanks again for your time; I really appreciate it.

Hi,
I bought my t530i with the HD (1366x768) display. I am absolutely disappointed in it. The viewing angle is horrible, the colors are whitey, pallid, the black color is not black, it is rather dark gray, because the backlight is so strong. I would like to sell it, because it is useless for me, but nobody wants it. I don't know if this applies to the 430 series, so I suggest You to check it out personally, before You buy it.
Gellert

External DVI resolutions (1366 x 768)

Iam thinking about using an HDTV LCD 32" TV as second monitor.
I can not find any informations what Resolutions the GraCa is available at the external DVI port. The LCD TVs usually have
1366 x 768 Pixel
Is this resolution supported by the Hardware ?
Is there a list , which resolutions are supported by the Hardware ?
(PS I only need Text editing features, no High Resolutions for this,thats why I might not need expensive high resolution displays...)

yes,
the new bios (3.10). It supports a lot more resolutions now: 800x600, 1024x768, 1280x768, 1280x800, 1280x1024, 1400x1050, 1440x900, 1680x1050, 1920x1080.
I just seen that post, but I don't see the 1366 x 768 resolutions, is not supported?
do you have a suggestion to fix this problem?
Thanks in advance

Save for Web & Devices window doesn't fit @ 1366 x 768

I'm using a MacBook Air running at 1366 x 768, or within Adobe CS5 requirement tolerances, but whenever I try to 'Save for Web & Devices', the dialogue box that pops up is much too big, vertically speaking, for my screen. Attempting to minimize/maximize doesn't rectify the problem--a substantial portion of the window, including the buttons necessary to execute the save action, are in the not-visible portion of the window. If I hit ENTER/RETURN, I can complete the process, but this is clearly a bug: I should be able to resize the window, or scroll within it.
Is there something else I can do, short of pursue a fix from Adobe? Some setting I've overlooked? I'm running Lion, but this problem started on a Snow Leopard install.

mcpeckham wrote:
…Yep, that seems to work, but I shouldn't have to hide the Dock, right?…
Wrong! Yes, you do have to hide the Dock if you want to share the Adobe Photoshop minimum required space with Apple's Dock, which in my opinion should be invisible when not needed, which in turn is for a split second every half hour or more. I'm sick and tired of Apple shoving ugly, intrusive OS features down our throats (see footnote * in next paragraph). I want the computer to do what I want, not what Apple wants.
* 2.5 GHz Power Mac (PPC) G5-Quad; 16GB RAM; mutant, flashed 550MHz nVidia GeForce 7800GTX, 1,700MHz 512MB VRAM; ATTO ExpressPCI UL5D LP SCSI card; Mac OS X Tiger 10.4.11 and Leopard 10.5.8 boot drives; Spotblight, Dashboard and Time Machine permanently disabled; Dock hidden; dual 22" CRT monitors; USB wireless 'n' available but connected to the Internet via wired Ethernet; FW flatbed scanner; 2 SCSI scanners (one tabloid-size transparency scanner and a film scanner); various internal & external HDs; FW Epson 2200 and Ethernet Samsung ML-2850ND printers; 2 X Back-UPS RS 1500 XS units.
Mr. Schewe explains it more forcefully in his last post above.
My experience over the years has shown me consistently that the more vocal or vehement the complaint, vent or rant, the greater the likelihood of PEBKAC (google that if you're not familiar with the term).
Wo Tai Lao Le
我太老了

1366 by 768 resolution?

Can I set resolution to 1366 by 768?
I built recently a HTPC and was trying to connect it to my tv. But I was never able to get TV's native resolution. I only was able to get 1360 by 768, which cuts off menus below.
How can I set resolution to 1366 by 768?

A resolution of 1366x768 can be made to work on a Nvidia card with Nvidia's proprietary drivers by copy-pasting the following into /etc/X11/xorg.conf :
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "DFP-0"
HorizSync 28.0 - 67.0
VertRefresh 50.0 - 75.0
ModeLine "1366x768" 85.50 1366 1440 1584 1792 768 771 777 795 +hsync +vsync
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "ION"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "UseEdidDpi" "FALSE"
Option "ModeDebug" "true"
# Option "ExactModeTimingsDVI" "true"
# Option "ModeValidation" "NoWidthAlignmentCheck, NoDFPNativeResolutionCheck"
# Option "ModeValidation" "AllowInterlacecModes, NoTotalSizeCheck,AllowNon60HzDFPModes,NoEdidMaxPClkCheck,NoVertRefreshCheck,NoHorizSyncCheck,NoDFPNativeResolutionCheck,NoVesaModes,NoEdidModes,NoXServerModes,NoPredefinedModes,NoMaxSizeCheck,NoVirtualSizeCheck,NoMaxPclkCheck,NoVertRefreshCheck"
Option "ModeValidation" "NoWidthAlignmentCheck, NoDFPNativeResolutionCheck, NoVesaModes, NoEdidModes, NoXServerModes, AllowNonEdidModes, NoPredefinedModes"
# Option "UseEDID" "False"
Option "TwinView" "0"
Option "metamodes" "1366x768 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
If this xorg.conf does not work with a VGA cable, it can be fixed by adding to your current xorg.conf the line,
Option "ModeDebug" "true"
If your xorg.conf is the one from above, it already has this line. Then looking at /var/log/Xorg.0.log for the polarity the monitor expects. It should be something like this:
[ 1554.700] (II) NVIDIA(GPU-0): H/V Polarity : +/+
Then editing the modeline with the polarity. For example, if the polarity the monitor expects is,
H/V Polarity : -/+
You would change this part of the modeline:
+hsync +vsync
into:
-hsync +vsync
Last edited by Mihai Moise (2014-01-11 21:00:18)

1366 x 768 resolutions on titan 700

Hello,
how can I set the 1366 x 768 resolutions on my Titan 700?
Thanks for your co-operation
Marco

yes,
the new bios (3.10). It supports a lot more resolutions now: 800x600, 1024x768, 1280x768, 1280x800, 1280x1024, 1400x1050, 1440x900, 1680x1050, 1920x1080.
I just seen that post, but I don't see the 1366 x 768 resolutions, is not supported?
do you have a suggestion to fix this problem?
Thanks in advance

How can i get 1366 x 768 resolution (720p) from t42 laptop?

Hi,
I'm trying to connect my thinkpad t42 laptop using a vga cable to my samsung lcd tv. my lcd tv has a native resolution of 1366 x 768. However, when i go to display properties in my video setting, i can only select 1024 x 768 for my lcd tv (basically i only get 4:3 resolution options, i dont get any 16:9 resolution options). i've updated all my drivers - dont all windows and thinkvantage updates but absolutely cannot get the output resolution via vga cable to my lcd tv to be 1366 x 768.
Does anyone have any suggestions or has anyone had any luck solving this issue?
Thanks!

Hello,
Did you check Samsung's support web site to see if the provide a device driver (it may be called a monitor profile information file) for your Samsung LCD TV with 1366×768 (720p) resolution? If so, did installing that help?
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Howto get quad G5 to recognize 1366 x 768 resolution?

hi,
for a project we're using the panasonic PT-DW7000U-K projector, which has a native resolution of 1366 x 768. sadly our G5 doesn't show this resolution in the display preferences.
how would i go about having the G5 to display this resolution?
or is it also related to the graphics card?
thanks
arri

DisplayConfigX is what most use to deal with "oddball" display settings. Check it out here:
http://www.3dexpress.de/

Will Production Premium CS6 able to install in Inspiron 15R having 1366 x 768 Display? Have any one

My Spec
Core i5
8GB Ram
1366 x 768
Ati 1gb HD5740
I'm succesfully using CS5.5 with out any problem despite it also said minimum resolution must be 1280x900. But it didn't give me any error in instalation or usage. I know my lap is not suitable for production. I'm just in the proces learning the software and video editing. So i don't mind scroling big dialog boxes.
I just want to know will CS6 it work or not. have any one tried it in 1366 x 768? In CS5.5 it working fine for me. (Had the same Display requirement though)

Then i will install the trail and see before spending $375
.Hope it won't disturb my current cs5.5 setup

Can Motion be set up for a 1366 x 768 monitor?

I'm new to using Motion, but our monitor we will output on is 1366 x 768 and I do not see that option in the set up for project presets.... how do I set up a project for this size monitor? Can it be done?
Thanks.
Pam

Custom lets you type in what ever you want...
Patrick

HDTV 1366 x 768 - not a standard option?

I have found dozens of references to this apparently common HDTV resolution, but the mini doesn't provide this as a standard resolution. When will this be added?
Steve opened the flood gates to people hooking these mini's up to HDTVs at introduction. This would go a long way to making this a reality. DisplayConfigX isn't an option for those of us that are risk adverse.
It's a mess to run with overscan enabled, because the OS X interface is particularly not overscan friendly (too much useful stuff on screen edges). It would be okay if DVD player automatically turned this on in full screen mode. But it's still unfortunate to run an LCD TV in something other than it's native resolution.
Mac Mini (Early 2006) Mac OS X (10.4.5)

I think the settings that are needed may need to be tweaked for each individual display/TV, but I'm not sure. I have a 32" Syntax Olevia. Here are the settings I used:
From the SwitchResX Control Panel, in the Resolutions section, select the "Custom" Tab.
Start a new one (plus button)
Select Custom (not Scaled) at the top.
Select Use simplified Settings: GTF at the bottom.
Fill in the numbers:
- Active: Horizontal=1366, Vertical=768
- Scan Rate: Vertical=60
Hit Tab and some grayed out numbers will change.
Select OK to leave that window.
Select Apply
Most likely you need to restart your computer at this point and upon restart your new resolution should be available to be selected as a valid resolution.
Dual 1.2 G4/Intel Mini Dual Core Mac OS X (10.4.5)

Flash development and the 1366 x 768 screen resolution

Has anyone tried to run Flash Pro [or, more importantly, the entire Web Premium Creative Suite] on a laptop with 1366 x 768 screen resolution? Yes, I am aware that the specs for the software say that 1280 x 800 is minimum. What I'm trying to figure out is whether this is an outdated spec from before the 1366 x 768 screen size became basically the only thing you could get in a 14" or 15" laptop or whether there is actually something desperately important about those last 32 pixels that will cause the software to function improperly. I want a laptop that I can use to work on projects so I don't have to work at my desk all the time, and I need to know if I can get an off the shelf laptop for a reasonable price, with specs that meet or exceed the requirements of the software, aside from screen res, or whether I must get a higher end laptop with the full 1080 vertical.
Thanks!

For future reference, and so some poor soul in the future doesn't have the same issue getting an answer that I did: Flash Professional seems to work fine at 1366 x 768. It is a teeny bit cramped, though it would be at 1280 x 800 as well. I don't think I would ever want to ONLY use that size, but for the sake of not losing momentum on projects when I travel, it should be fine.
I finally realized that the easiest way to test this was to simply shift my desktop monitor from its native resolution [1440 x 900] to 1366 x 768 and trying to use the software for a while. Not sure why it took me so long to figure that out, but there it is.

1366 X 768 16:9 question

Similar Messages

Maybe you are looking for