1456 and 1900 errors

We have branches that are using Middle Tier for ZfD services. They are
using workstations newly imaged with W2K Sp4 and, once imported, they
cannot be remote controlled. The WMAuth.exe shows that the workstation
is not authenticated, when run against a test workstation. Workstation
authentication is a service level authentication, so I don't think that
it can be configured. Have you got any solutions for this?

you're using mid tier with Zfd3?
Shaun Pond
Novell Support Connection SysOp

Similar Messages

HOW TO REPAIR 1900 ERRORS FROM MY LAPTOP-IF POSSIBLE FREE

Duplicate of [/questions/860946]. Also this forum is for Firefox support and not computer tech support.
my laptop have about 1900 errors in general and I very ask you to help me to repair it -if possible free,as all it can have negative effect of working laptop process-thank you beforehand -sincerely-LEONID

You could get a USB card reader - they're all over the Internet. Here is one from Kingston at Amazon. It should do the trick for you.
Clinton

XSL-1900 error

I am investigating an XSL-1900 error which only seems to occur when the server is under load. I've managed to reproduce this with a threaded test-bed and caught a TransformerException thrown from JXTransformer.reportException() called from JXTransformer.transform. The parameters passed in were java.lang.ArrayIndexOutOfBounds
0
1900
null
Unfortunately without the source code this was not much help.
Is it possible that this class is not threadsafe ? Or any other suggestions ?

Using your code, compiled with JDK 1.4.2_05, I got this on stdout:
Yep, it worked!
There is something rotten somewhere. I compiled directly from command line (javac): try it to see if it is not some kind of unexpected feature from your IDE.
D.

Each time I try to synch photos from my Windows 7 PC to my iPad2, iTunes stops working, and the error report says Problem Event Name:     APPCRASH   Application Name:     iTunes.exe   Application Version:     10.3.1.55   Application Timestamp:     4deec35

Each time I try to synch photos from my Windows7 PC to my iPad2, iTunes stops working and the error message is:
Problem Event Name:                          APPCRASH
Application Name:                             iTunes.exe
Application Version:                           10.3.1.55
Application Timestamp:                    4deec351
Fault Module Name:                          ntdll.dll
Fault Module Version:                        6.1.7601.17514
Fault Module Timestamp:                 4ce7ba58
Exception Code:                                  c0000005
Exception Offset:                                0002e3fb
OS Version:                                          6.1.7601.2.1.0.768.3
Locale ID:                                             1033
Additional Information 1:                  0a9e
Additional Information 2:                  0a9e372d3b4ad19135b953a78882e789
Additional Information 3:                  0a9e
Additional Information 4:                  0a9e372d3b4ad19135b953a78882e789
I reloaded iTunes 10 (64 bit) successfully, but the problem remains the same.
Any suggestions?

I looked in the folder from which I want to synch photos, but there is no such thing as an "ipod photo cache" in that folder, or sub-folders, as suggested in the link which you were nice enough to provide.
I have also tried removing photos from my iPad2 Photos App, and "iTunes has stopped working" shows up again as soon as I click on the "Synch photos from" button.

2TB Ext. Hard Drive is corrupted?, error code -50 and then error code -35 when i try to empty out my trash

okay so a few days ago i received and email for one of my colleagues to do some final editing to a music video. the folder contained 2 videos a rough chops and the main which was about 2-3GB which i dragged on to my external hard drive . and at the time i was trying to install a trial version of parallel lines and me being a newbie to the software i didn't know i need windows installments for it to run lol but yeah... so i was just getting frustrated with the software i kept installing it uninstalling it and then i was thinking my the problem might be because my MacHD space is low (less then 40GBs on my MacHD), so.. i installed it on my hard drive where all my important files are (I'm a graphic designer and do light video editing) video projects and many photoshop projects form 2007 and logs and just a bunch of important files in my hard drive. so because i was so frustrated with the software i wasn't thinking and i installed it on my external 2TB hard drive. and when i realized parallel wasn't working i gave up, uninstalled the program form the hard drive and for some reason when i did that and i tried opening the video my friend had email to me and for some reason it did load up but a few seconds maybe about 10sec in the video is froze and closed my media app (VLC) and when i tried opening other video files it would freeze every few minutes but those specific files i had drag in last were not playing after at least 5 secs and eventually didn't open at all so i restart my computer login and now i get scared i see that my MacBook Pro isn't reading my external hard drive so i search threw forums... i unplug from the wall plug my external hard drive back in my computer and it loaded up but when i opened my external hard drive all my files had that plank white paper icon on my folders (because i have everything organized but subject when you open then drive folder. so... i go in to my projects and nothing, i open my edited photos and nothing... my hart feels like its about to drop and i keep opening files and there is nothing in them, but in "get info" of my drive it shows that there is filled so i go to "disk utility"... i "verify disk" passes ..."repair disk" doesn't past.... i look it up in forums... so i reboot my computer and go to the safe recovery menu. go threw the same ting "disk utility"... verify, pass... repair, pass... so now i feel relieved. i login files in the ext. hard drive load up i tried again to open the files and same thing happens... so now I'm thinking its the files i drag the files to the trash and try to empty and its gone i reboot the computer and my drive didn't load up so i tried unplugin it and back in... drive comes up i notice theres trash.. i tried emptying it and i get the error code -50. and no files are popping up on my external drive and i try to repair/unmount disk and the verify disk doesn't pass and when i click repair disk it doesn't past and another error code pops up -35.... so i felt my drive alone for a few days and yesterday i go the files deleted from the trash and now I'm not getting any codes but when i try to unmount.verify/repair the disk. keeps letting my tits need to be repaired so i click the repair button another error unable to unmount volume to repair...
what do i do? my files still don't show up. and I'm very sorry for the long paragraph but i have to be detailed for you to understand my situation

Read this.

Sender mail adapter : no messages and no error log

Hello,
I have configured a sender mail adapter to read mails from the inbox. I have used IMAP protocol. URL is specified as imap://EMHBSEXM01/Inbox. User name and password is also specified properly. I have kept poll interval to 1 minute. Messages in the inbox are in unread status. But the mail is not getting processed. I do not see anything after 1 minute. I tried using generate fetch report flag. But even then it does not create any message in SXMB_MONI. I checked runtime workbench for Mail adapter but I do not see any message for the same. Is there something that I am missing?
Thanks,
Dev

Hi All,
I chekced your responses and tried accordingly. Our basis team has given me new link now and the error message has changed. I am getting following error message.
exception caught during processing mail message; java.io.IOException: unexpected login response; read 001F BAD Command received in Invalid state.
Does anyone have any idea what this error is?
Thanks in advance,
Devendra

Plug-in errors and dependency errors with a CAF app in DS in NW CE 7.1

I am learining to build CAF apps in Developer Studio in NW CE 7.1. Here are my steps and the errors I am getting:
Open Developer Studio
Switch to the CA perspective
File->New->Project
Choose Development Component under Development Infrastructure
Press Next
Choose Composite Application under sap.com
Choose MyComponents[demo.sap.com] under 'Local Development'
Vendor: demo.sap.com
Name: carpool
Caption: Car Pool
Language: American English
Domain: SAP-xApps
Support Component: CAF-APP (typed in, not chosen)
Press Finish
The following error appears:
Status ERROR
Plugin : com.sap.ide.metamodel.core.services.eclipse
code=0
Internal error
   Plugin name: Metamodel Core
   Internal error : com.sap.ide.metamodel.core.services.eclipse
   Class      : com.sap.ide.mmservices.core.eclipse.project.ArchiveVersionChecker
   Method     : computeIdeJarProperties
   Message    : C:\Program Files\SAP\IDE\CE\eclipse\E:\Program Files\SAP\IDE\CE\eclipse\plugins\com.sap.dictionary.services_10.0.0.070821165456\lib\com.sap.dictionary.services_api.jar (The filename, directory name, or volume label syntax is incorrect)
   Exception : java.io.FileNotFoundException: C:\Program Files\SAP\IDE\CE\eclipse\E:\Program Files\SAP\IDE\CE\eclipse\plugins\com.sap.dictionary.services_10.0.0.070821165456\lib\com.sap.dictionary.services_api.jar (The filename, directory name, or volume label syntax is incorrect)
java.io.FileNotFoundException: C:\Program Files\SAP\IDE\CE\eclipse\E:\Program Files\SAP\IDE\CE\eclipse\plugins\com.sap.dictionary.services_10.0.0.070821165456\lib\com.sap.dictionary.services_api.jar (The filename, directory name, or volume label syntax is incorrect)
at java.util.zip.ZipFile.open(Native Method)
at java.util.zip.ZipFile.<init>(ZipFile.java:203)
at java.util.jar.JarFile.<init>(JarFile.java:132)
at java.util.jar.JarFile.<init>(JarFile.java:70)
at com.sap.ide.mmservices.core.eclipse.project.ArchiveVersionChecker.computeIdeJarProperties(ArchiveVersionChecker.java:296)
at com.sap.ide.mmservices.core.eclipse.project.ArchiveVersionChecker.doFullCheck(ArchiveVersionChecker.java:214)
at com.sap.ide.mmservices.core.eclipse.project.ArchiveVersionChecker.checkProject(ArchiveVersionChecker.java:125)
at com.sap.ide.mmservices.core.eclipse.generation.GenerationServiceEclipse.checkArchiveVersions(GenerationServiceEclipse.java:110)
at com.sap.dictionary.tools.generation.eclipse.GenerationBuilder.checkArchiveVersions(GenerationBuilder.java:335)
at com.sap.dictionary.tools.generation.eclipse.GenerationBuilder.build(GenerationBuilder.java:85)
at org.eclipse.core.internal.events.BuildManager$2.run(BuildManager.java:624)
at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37)
at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:166)
at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:197)
at org.eclipse.core.internal.events.BuildManager$1.run(BuildManager.java:246)
at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37)
at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:249)
at org.eclipse.core.internal.events.BuildManager.basicBuildLoop(BuildManager.java:302)
at org.eclipse.core.internal.events.BuildManager.build(BuildManager.java:334)
at org.eclipse.core.internal.events.AutoBuildJob.doBuild(AutoBuildJob.java:137)
at org.eclipse.core.internal.events.AutoBuildJob.run(AutoBuildJob.java:235)
at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)
I do not think I missed anything installing NW CE 7.1, but this error makes me think that some plug-in was erroneously left out of the install.
Incidentally, I can continue onward and build an app (this is obviously a tutorial), but when I try to deploy I get the following error:
The deployment of the archive failed with an exception!
([ERROR CODE DPL.DCAPI.1027]) DependenciesResolvingException.
Reason:[ERROR CODE DPL.DC.3033] An unresolved dependencies error
occurred while sorting the deployment batch items regarding the
dependencies.;nested exception is:
com.sap.engine.services.dc.cm.deploy.sdu_deps_resolver.UnresolvedDepen
denciesException:[ERROR CODE DPL.DC.3437]Unresolved dependencies
found for the following deployment items:
1. Component: name:'carpool~ear',vendor:'my.company',location:
'localDevelopment',version:'20080501110329',software type: 'J2EE',
dependencies:'[name:'cafruntimeear',vendor:'sap.com',name:
'cafcoreear',vendor:'sap.com']
Unresolved dependency:
name:'cafruntimeear',vendor:'sap.com'          (not found in the admitted
batch items and the repository)
Unresolved dependency:
name:'cafcoreear',vendor:'sap.com'          (not found in the admitted
batch items and the repository)
Please check the error log for further informations.
Again, this looks like I am missing some components.
Any assistance is greatly appreciated.
TB

Further developments: As you may note from the error message, DS is looking for com.sap.ide.metamodel.core.services.eclipse in both the C: and the E: drive at the same time. In fact, this file exists in the E: drive subdirectory listed, so I obviously have an error with two drive designations being concatenated. Does anyone know how I can change the lookup directory for this dependency (or any dependency)?
Thanks,
TB

Input and CRC errors on ASA 5505 outside interface

All,
I see input and crc errors on my ASA 5505 eth0/0(outside) interface and packet drops. There is very slow connection though we have 20mb line. ISP also sees the issue on the Lan interface side. We have the speed and duplex configured same on both ISP and our end.
I am suspecting if this is Physical cable issue. Please suggest.
Hardware is 88E6095, BW 100 Mbps, DLY 100 usec
        Full-Duplex(Full-duplex), 100 Mbps(100 Mbps)
        Input flow control is unsupported, output flow control is unsupported
        Available but not configured via nameif
        MAC address 001a.b4c9.f3d9, MTU not set
        IP address unassigned
        158138067 packets input, 141061681082 bytes, 0 no buffer
        Received 183037 broadcasts, 0 runts, 0 giants
        19642 input errors, 19642 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
        0 pause input, 0 resume input
        0 L2 decode drops
        144684 switch ingress policy drops
        124291353 packets output, 38197278051 bytes, 0 underruns
        0 pause output, 0 resume output
        0 output errors, 0 collisions, 0 interface resets
        0 late collisions, 0 deferred
        0 rate limit drops
        0 switch egress policy drops
        0 input reset drops, 0 output reset drops

Hello Ravi,
This kind of issues CRCs/ Input Errors are tipically known as L1 issues so make sure you check the cable and if that does not make a difference change the port on each side to see if there is a difference.
Unfortunetly the ASA does not support the Time-Domain Reflectometer feature so we must do the test of L1 by ourselfs.
Can you clear the counters of the interface, test the changes provided and provide us some feedback?
Looking for some Networking Assistance?
Contact me directly at [email protected]
I will fix your problem ASAP.
Cheers,
Julio Carvajal Segura
http://laguiadelnetworking.com

Can anyone help me connect my Macbook Air to a SAMSUNG TV. When I follow the basic instructions (Thunderbolt to HDMI connection) the screen on my computer goes grey and an error message appears inviting me to press any button to restart th

Can anyone help me connect my Macbook Air to a SAMSUNG TV. When I follow the basic instructions (Thunderbolt to HDMI connection) the screen on my computer goes grey and an error message appears inviting me to press any button to restart the Macbook. When I do this nothing happens. Only when I disconnect the computer from the TV does the Macbook allow me to login. The TV does not receive any signal from the Macbook even though I know the HDI port works fine. Any ideas what I'm doing wrong? Do I need to enable something on the Macbook?

An update...
I downloaded Apple's (rather large!) list of software updates today, and I was finally able to recognize my iPod again. I did a restore using the iPod updater from 06-2006, and all seemed to work OK. (I'm afraid to try the new one again!)
Then I tried to re-load my music library from iTunes, and got stuck. It froze up after a while and wouldn't go any further.
When I disconnected my iPod from my computer, I find 2 podcasts and nothing else, though iTunes told me it had transferred 600+ songs. Those 2 podcasts do play fine, and the basic iPod software all seems to be intact.
So -- anyone get through this connection problem and have any ideas to share??
iMac Mac OS X (10.4.7)

I have updated my iTunes to the latest edition and now my iTunes wont open saying MSVCR80.dll is missing from my computer and that i have to reinstall itunes. I have tried reinstalling twice now and this error message keeps appearing. What is going on?

I have updated my iTunes to the latest edition and now my iTunes will not open saying MSVCR80.dll is missing from my computer and that i have to reinstall itunes. I have tried reinstalling twice now and this error message keeps appearing. What is going on?

Solving MSVCR80 issue and Windows iTunes install issues.

Time Machine won't back up. Starts of REALLY SLOW, and the errors out.

I've been having a hard time getting time machine to back up. To start off I'll give you my specs and what I have done.
iMac
OS 10.6.6
2.4 GHz Intel Core 2 Duo
4 GB 667 DDR@ SDRAM
320 GB HD
All software updates are current. I am trying to back up to an external Western Digital 1 GB drive connected by USB2. I have formatted the external drive, and set a single partition on that drive from the Disc Utility. I have run disk repair on both the external and local hard drive. I have run disk repair permission on the local drive. I have restarted, after every time. I have done everything listed above multiple times, and have done them all in kinda different orders each time.
My thought is that the issue may not be with the hard drives, but maybe a file its trying to back up. When it starts out for the first time, it tells me that it needs to back up over 100 GB of data. It gets about halfway done, and then errors out. When I try to start it again, it tells me that it needs to backup around 50 GB of data. And this time, its REALLY slow. Like bytes slow, not Mega bytes, or even kilobytes. Bytes. 36 bites backed up, 120 bytes backed up. 2 Kilobytes backed up. SLOW SLOW SLOW.
Then it picks up, and usually gets up to 120 MB, and then gives me this error message "The Backup was not performed because an error occurred while copying files to the backup disk. - The problem may be temporary. Try again later to back up. If the problem persists, use Disk Utility to repair your backup disk."
Its a pretty generic message, and gives me no help in trying to figure out what the problem is. I've been trying again for almost 3 days now, and nothing is working. Is there an error log file that I can go find that would help me a little more?

woody24 wrote:
"The Backup was not performed because an error occurred while copying files to the backup disk. - The problem may be temporary. Try again later to back up. If the problem persists, use Disk Utility to repair your backup disk."
See #C3 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of this forum).
Its a pretty generic message, and gives me no help in trying to figure out what the problem is. I've been trying again for almost 3 days now, and nothing is working. Is there an error log file that I can go find that would help me a little more?
Tell Apple about the inadequacy of that message: http://www.apple.com/feedback/timemachine.html

INSTALLED ITUNES AND THE ERROR-MAPI WAS UNABLE TO LOAD THE INFORMATION SERVICE APLZOD-OCCURS. WHAT DO I DO.

INSTALLED ITUNES AND THE ERROR-MAPI WAS UNABLE TO LOAD THE INFORMATION SERVICE APLZOD-OCCURS. WHAT DO I DO.

Is this on a Windows XP, Vista or 7 system?

Crystal Reports and Java error

Hi all, I'm trying to run a Crystal Reports report from my web application, but is happening a problem and I check all my code, CR installation, windows folder access rights but I didn't find any problem. Anyone can help me.... please!!!!!!
The error message, in java console is:
java.io.FileNotFoundException: http://localhost/viewer9/javaviewer/ReportViewer.jar
     at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
     at sun.plugin.net.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
     at sun.plugin.net.protocol.http.HttpUtils.followRedirects(Unknown Source)
     at sun.plugin.cache.CachedJarLoader.isUpToDate(Unknown Source)
     at sun.plugin.cache.CachedJarLoader.loadFromCache(Unknown Source)
     at sun.plugin.cache.CachedJarLoader.load(Unknown Source)
     at sun.plugin.cache.JarCache.get(Unknown Source)
     at sun.plugin.net.protocol.jar.CachedJarURLConnection.connect(Unknown Source)
     at sun.plugin.net.protocol.jar.CachedJarURLConnection.getJarFile(Unknown Source)
     at sun.misc.URLClassPath$JarLoader.getJarFile(Unknown Source)
     at sun.misc.URLClassPath$JarLoader.<init>(Unknown Source)
     at sun.misc.URLClassPath$3.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.misc.URLClassPath.getLoader(Unknown Source)
     at sun.misc.URLClassPath.getLoader(Unknown Source)
     at sun.misc.URLClassPath.getResource(Unknown Source)
     at java.net.URLClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.net.URLClassLoader.findClass(Unknown Source)
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
load: class com.crystaldecisions.ReportViewer.ReportViewer not found.
java.lang.ClassNotFoundException: com.crystaldecisions.ReportViewer.ReportViewer
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed.
     at sun.applet.AppletClassLoader.getBytes(Unknown Source)
     at sun.applet.AppletClassLoader.access$100(Unknown Source)
     at sun.applet.AppletClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     ... 10 more
Cheers,
Zilmar
Message was edited by:
Zilmar

I don't know anything about Crystal Reports whatsoever, and I couldn't care less frankly. There has been an excess of postings on these forums about this product, whatever it may be.
If Crystal Reports isn't relevant to the problem why was it mentioned? In the title?
And in any case why was it posted in a forum entitled 'Reflections & Reference Objects'?
And your suggestion that it's up to me to do the research is fallacious and indeed ludicrous.
And the error message 'java.io.FileNotFoundException: http://localhost/viewer9/javaviewer/ReportViewer.jar' is entirely self-explanatory.
And it strongly appears to have something to do with the deployment of Crystal Reports.
None of which is a Reflections & Reference Objects problem, or a Java problem, or Sun's problem.

TS3694 when i try to restore my phone on itunes it stops half way through and says error 29 unable to restore

when i try to restore my iphone 4s it say unable to complete restore error 29 now i cant use my phone at all

Hello, gordy69.
Thank you for visiting Apple Support Communities.
I see you came from the most relevant article in regard to not being able to restore your iOS device. I would take a look at the section I highlighted below. Make sure to try the steps outlined in that section.
Check for hardware issues
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/TS3694
Cheers,
Jason H.

TS1717 When I try and start iTunes after trying to intall the 11.4 update on my Windows 7 laptop, it says to reinstall iTunes and "Windows Error Code 193" I tried ave the same failed response. Can someone help?

When I try and start iTunes after trying to intall the 11.4 update on my Windows 7 laptop, it says to reinstall iTunes and "Windows Error Code 193" I tried ave the same failed response. Can someone help?

Hi inharmony35,
If you are having issues with iTunes after an attempted update, you may want to try the steps in the following articles:
Apple Support: Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Apple Support: Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Regards,
- Brenden

1456 and 1900 errors

Similar Messages

Maybe you are looking for