15" (late 2008) macbook pro and 30" cinema display??

Im looking to buy one of the new macbook pros, and I know that you need the$100 dual link cable to get it to work with the older apple displays.
With that cable what is the max resolution I will get on a 30" cinema display?
The max res for the 30" is 2560 x 1600 pixels, but I have heard that you may not be able to get real high rez with the 15"
anyone know, I would appreciate the help....
-bill

You'll get 2560 x 1600 - that's the max resolution of the display, and it's the max resolution of dual-link DVI (at least, at the standard refresh rate).

Similar Messages

  • Just updated from a late 2008 Macbook Pro and I am getting a blink on my external screen

    I just upgraded from a late 2008 Macbook Pro with a  AMD Radeon HD 6770M 1024 MB graphics card and I am now getting a blink (black screen) every few seconds.
    Anyone know a fix.
    Thanks

    You could always give it a shot - the only problem that you might run into is that the the early 2011 might not boot when the hard drive is swapped from the 2008 hard drive. Some versions of OS X are simply not compatible between different models.
    But it's worth a try...
    Clinton

  • Pixel Distorsion: MacBook Pro and 30" Cinema Display

    Connecting the MacBook Pro to the Cinema Display using the Dual Link DVI Adapter (USB from Display plugged in Adapter, Adapter USB plugged in USB Port > not next to Mini-DVI Port) produced wild coloured Pixel Lines in the Dark Areas (really annoying) and starting After Effects CS4 it even gets worse: The full Interface is blinking green on the edges of each Panel.
    Pleeeaaaaase help!!

    I have the same problem with my 30" HD display and the new 15" MBP. However, I did not have this problem initially. Until yesterday I had been fortunate not to experience issues (see reviews of the dual link adapter at the Apple store) regarding the 30" diplay. However, after contacting applecare about an unrelated issue, the technician had me restart holding the "shift" button. He said this would "correct a lot of stuff". Well it didn't seem to do anything except cause my 30" monitor to exhibit these same problems that everyone else is complaining about! Apple, please address this flaw!

  • Macbook Pro and 30" Cinema display for gaming?

    Does anyone know if a Macbook Pro (17" i7 2010) would be powerful enough to drive the 30" Cinema display (or a Dell 30") specifically for gaming to a reasonable performance FPS with a game such as Call of Duty 4?
    Would I have to knock down the resolution from the native 2560x1600 and if so is the image quality still acceptable or blurry? I realize I need either the dual link adaptor or the display port to achieve the max resolution but just wondering if it is asking too much of the graphics card?
    Thanks in advance, any info much appreciated.
    Rick.

    Hi. The graphics card will be able to handle it. I would suggest using a Min Display Port to HDMI adapter. Most new adapters will even transfer the sound too so you can use the speakers built speakers on the TV.
    I often use my 2008 model MacBook Pro with a Mini Display Port to HDMI on my 62'' Samsung DLP. Perfect 1080p quality.

  • 2008 Mac Pro and Apple Cinema Display 27"

    Is there some sort of adapter that would allow me to plug the new Apple Cinema Display 27" with a 2008 Mac Pro? Or what change would I have to make to be able to work this out?

    Adrian - did you end up getting an adapter and using it? I purchased the Atlona DVI to Mini DisplayPort Converter (AT-DP200) to connect my 2008 MacbookPro (with GeForce 8600M GT) to the new 27 in. Cinema display, and though it works, it looks a bit fuzzy in terms of resolution. Having read the response here about making sure it is a DUAL link converter, I was going to try to return it for the AT-DP400.
    Then I read another thread on here that seemed to indicate that the AT-DP400 would not work at all with the 2008 Macbook Pro.
    http://discussions.apple.com/thread.jspa?threadID=2585380&tstart=0
    So now I'm confused. Just wondering what your experience is, if you ended up with getting the display and converter.

  • Can I take the hard drive from a late 2008 MacBook Pro and put it in an Early 2011 MacBook Pro?

    I just got a new 15" MBP and I want to give my older one to my son. The "older" one is an Early 2011.  My son has the Late 2008 model. My brother will take the 2008 MBP once I've moved all my son's stuff to the 2011.  Here's the question. My son has a 750GB hard drive on the 2008. He has partitions on it for Boot Camp and for his games. The 2011 only has a 500GB hard drive. Rather than erasing the 2011, restoring it from Time Capsule, then setting up Boot Camp and the other partitions all over again, or even using Winclone or something like that, can I just swap the hard drives? It would certainly faster and easier. I just wonder if there is a technical reason why I shouldn't do that. 

    You could always give it a shot - the only problem that you might run into is that the the early 2011 might not boot when the hard drive is swapped from the 2008 hard drive. Some versions of OS X are simply not compatible between different models.
    But it's worth a try...
    Clinton

  • Late 2008 MacBook Pro 17" broken screen display

    I have been using my old MacBook Pro (A1261) for some design work since 2008. It's been a good sport and I love it dearly. Unfortunatelly, recently my screen started working intermittently. This week it has died completely. I am not convinced it's worth having it repaired as it might cost more that the laptop itself. Could anybody help me view my display using another laptop or TV? I have previously been able to view it's display on my LG TV (even when  the mac displayed wasn't working) using the DVI External Display Port but I have changed my display settings so I am unable to connct it now. I have also been able to detect its display on my Mac Book Air but again, I must have changed the setting because I get no luck this time. I have been using BootCamp and most of my design work sit in the Windows part (pardon my lack of IT jargon) so perhaps I could retreive it using a PC??? Any help would be much appreciated

    You are right about the cost of screen replacement if you have it done (by Apple $700-600, by others $400-500, approximately.) I spoke to my (authorized independent) Mac repair shop when a friend trashed his screen and my Mac guy told me to replace it for him (I'm a geek) because I could do it for under $200 in parts and the DIY instructions on ifixit dot com. If you're a little geeky and have a couple of tiny tools, you can too.
    Your other option is to use the mini displayport to hook up to a HDTV or external monitor.  I can't tell you the exact procedure because this is the Mac Pro forum, not the MacBook Pro forum and I don't know all the details for those tiny machines. I figure if you wrote that post you can also read, so I'd suggest reading the Mac Help files that are included in the OS. It can't be that hard.
    good luck

  • Will my old isight camera work with my Macbook pro and HD Cinema display?

    I have it hooked up but can't get the computer to switch from the built in camera to the external one.

    William Worthington wrote:
    I have it hooked up but can't get the computer to switch from the built in camera to the external one.
    Firewire iSights can be picky about how they are connected. My first suggestion for your particular trouble is to try connecting directly to one of your Mac's built-in FW ports rather than via the monitor's Firewire hub. More info:
      http://www.ralphjohns.co.uk/EZJim/EZJimpage6.html
    If necessary, you can use the suggestions from How to test your (external) iSight to ensure it is functional to be sure it is working with your new Mac.
    The solutions to your issues about switching from the built-in camera depends on which application you are using to operate your iSight. Here is how camera selection works in a few exampleS:
    (1) For iChat, you can choose which iSight you use in the "Camera:" choices bar in iChat > Preferences... > Audio/Video that appears when more than one compatible camera is connected. Although your camera choices will be different, the choices bar will look something similar to the Preferences settings shown here:
    If you cannot see this choices bar, your Mac is recognizing only one (or none) of your iSights. In that case, consider the suggestions from http://support.apple.com/kb/HT2090
    This choices bar solution applies ONLY to iChat. Most other applications also have settings that allow you to choose which camera to use. However, they do not all work the same way.
    (2) For instance, iMovie HD's camera choice is NOT set via Preferences. When you have more than one compatible camera connected, iMovie uses a drop-down menu choice something like this (depending on which version of iMovie you use):
    Note: Because I had no built-in iSight connected when I made this example, when my external iSight was disconnected, the drop-down menu showed only "Time Lapse." Because your Mac has a built-in iSight, your built-in iSight would show in the drop-down menu even when no other camera is connected. Connecting your external iSight should allow you to choose either camera.
    iMove 8 (from iLife '09) uses a different camera choice button shown in this article:
      http://docs.info.apple.com/article.html?path=iMovie/8.0/en/10172.html
    In general, you can use your Mac's help for the application in use to find out how to select among more than one connected camera.
    (3) Photo Booth is a different matter. PB is such a simple, basic app that it offers no menu selectable choice. Unless you make your built-in iSight the camera being used by some open application before you launch Photo Booth, Photo Booth will use ONLY your built-in iSight.
    However, you can use the trick from ¶ 4 of http://docs.info.apple.com/article.html?artnum=302781 to let Photo Booth use your Firewire external  iSight:
    • Connect your external iSight and turn it on.
    • Quit Photo Booth (PB) if it is running.
    • Launch any app with a user-selectable camera "Preferences..." menu command.
     (The "tip" suggests that you use iChat, but others should work as well.)
    • Open "Preferences..." and set the camera "Preference" to use your built-in iSight.
    • Now launch PB. PB should now use the external iSight
     because your built-in camera is in use by the other application.
    (4) For apps other than those above, see their Help or other documentation.
    (5) If you have specific questions, we will try to help, too.
    EZ Jim
    Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.2)  MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.2)
    LED Cinema Display  G4 PowerBook 1.67GHz (10.4.11)  iBookSE 366MHz (10.3.9)  External iSight

  • Boot Camp, XP, Macbook Pro and a Cinema Display

    Add these things together and what do you get? Frustration enough to beat my head against the wall.
    If I get my Cinema Display to work at all when connected to the MBP in XP, it's because I said a prayer to Bill Gates, or I looked away at just the right time, or some other arcane mystical crap because without changing Display parameters at any time, it's a completely random crap shoot on whether or not XP will send output to my Cinema Display. I can't get clamshell mode to work at all. So, I cripple my video capabilities when I actually manage to get output to the Cinema Display.
    I loaded the Boot Camp XP drivers and CCC app from Ati's site. They don't help. They don't run. They want 2.0 .Net framework, and somehow, with all the patches and crap downloaded and installed from microsoft they still don't work. I get errors of missing implementation files. The whole thing is buggier than ****. Had to find and install 2.0 .Net framework, then patch it. Still nothing works right.
    I am my wits end and frustrated beyond belief. Anyone at all have suggestions to help? I've tried three times to get help from Applecare, and I either get told they can't help me, or I get put on hold then hung up on.

    Same problem with a brand new (today) 20" CInema Display. Annoying but not a big issue until now.
    MacBookPro 2.16 2Go RAM 20" CInema Display   Mac OS X (10.4.10)  

  • How to connect a late 2008 macbook pro to hd tv

    I have a late 2008 Macbook Pro and want to connect it to my HD TV what cables do I need ?

    looks like if you'll use exactly this adapter you'll get audio over HDMI

  • How do I install Mavericks onto a new SSD HD in my late 2008 MacBook Pro?

    How do I install Mavericks onto a new SSD HD in my late 2008 Macbook Pro, and then I  hopefully can reinstall my data from my Time Machine backup?
    I presume the SSD will need some type of formatting, before I can install Mavericks from the internet? Then can I use my Time Machine backup to reinstall all my other software and settings?

    In order to load Mavericks the SSD will have to be formatted Mac OS Extended with GUID partition mapping

  • I have a early 2008 Macbook pro and just bought a new battery, but it is not holding a charge

    I have a late 2008 Macbook pro and just bought a new battery, but it is not holding a charge.  I read it may be the charger,
    that sometimes is blank, but it does charge my computer.
    Anything I can try?
    I have updated to 10.9.2
    Message was edited by: wplewis

    Bring it back to the Apple store with your MBP and charger.  If the battery is found to be defective, they should provide you with a replacement (assuming you are in the warranty period).
    Ciao.

  • I have a late 2008 Macbook Pro, I am trying to run MW3 but it will not work without crashing a few minuets into the game. The general specs on my computer are a dual processor 2.53 ghz. 4 gb ram and a NVIDIA geforce 9400 (9600 is the alternate card)

    I have a late 2008 Macbook Pro, I am trying to run MW3 but it will not work without crashing a few minuets into the game. The general specs on my computer are a dual processor 2.53 ghz. 4 gb ram and a NVIDIA geforce 9400 (9600 is the alternate card).
    Things to note:
    I have been unable to update firmware on this computer for about a year now. Im not sure why.
    I am running a bootleg copy of Windows XP on this computer, I would not like to spend $149 to get Windows 7 if possible.
    any thoughts on the matter would be greatly appreciated, thank you.

    Why don't you take your 'old' MBP into your local Apple Store and have them check out everything that's wrong with it - and I mean everything? Then, when you get an estimate about how much it would cost to get the machine completely repaired, ask about the Apple flat-rate repair pricing?
    It's worth a shot - and with what you may save, you can put in the bank for a new MBP.
    Clinton

  • I have a late 2008 Macbook Pro last updated to Mavericks OS.  The screen died and it's not worth replacing.  How do I remove the hard drive and use a drive sled to access info I need?

    I have a late 2008 Macbook Pro last updated to the Mavericks OS.  The screen died and I took it into an Apple store and was told replacing the screen and the hardware to repair everything would cost almost as much as buying a new laptop or a cheaper model.  I was told that I can use a drive sled to access data I need on my hard drive. How do I remove my hard drive and use a drive sled to get to the information I need?  What makes matters more complicated is I need to update my iPhone and my iTunes/App store purchases.  How can I accomplish this?
    My wife has a late 2008 Macbook Pro as well, which I am assuming I need to run my hard drive.  Is there a way to just access just my hard drive without interfering with hers?
    I know this is lengthy.  Thanks to whoever looks at this and offers advice/instruction.

    the device you need is an External enclosure for a 2.5" (laptop form factor) SATA drive.
    A USB-interface enclosure will be slow, but is adequate for this task and for re-purposing as a backup drive later.  A firewire-interface drive would be faster, but is harder to find, more expensive, and faster than needed for this purpose.
    The drive will mount as an "extra" drive on your wife's Macbook, and you can drag and drop whatever you wish. You could create a separate Account for yourself on her computer, and use Migration Assistant or just copy your stuff over to the new account. Then it would not interfere with her files.

  • Renewing a Late 2008 MacBook Pro: hard drive and battery substitution

    Hi all,
    I am an happy user of a late 2008 MacBook pro.
    However, with the passing of time, it became slow and the battery also deteriorate (it still quite OK, but it is not like at the beginning).
    But let's start from the beginning: the hard drive
    By googling for a while, I noticed that several people experienced very slow performance of their late 2008 MacBook Pro. That is also my case. Apparently, this is due to the hard disk which is dying, and then I considering to change it. However, I haven't found answers to these questions:
    - Is it possible to mirror all the containt of the current disk to the new one?
    - I only have the original installation disks of the first Leopard. I made all the updates through the network. Moreover, since it passed lot of time, I am afraid that some sector of the installation disks may be damaged. This means that I may fail in the installation of Mac Os X on the new hard drive. If I have to reinstall everything from scratch with the new hard drive and without installation disks, how should I do?
    - If I go a Mac Reseller shop, will do they perform this operation? And how much does it costs to make it? Or I may also go to some generic computer reparation guy?
    - Is it convenient to save all the data (movies, documents, pictures, emails, etc) somewhere (e.g. external HD) and then perform a completely new installation?
    Next, let's consider the battery.
    Here is a screenshot taken with iStat Pro:
    Do you think it is worth changing it? From System Profile I have those other info:
      Full charge capacity (mAh):          3386
           Current (mA):          846
           Voltage (mV):          12029
      Condition:          Replace soon
    What do you suggest to do then? How much does it cost a new battery? Actually, I think that also the processor performance deteriorate (it often becomes very hot, especially when watching Flash or Silverlight stuff), but, unfortunately I cannot change it.

    Hi!
    Thanks for all the answer. Please let me to resume this old and interesting discussion.
    After having evaluated several solutions (including NAS, different ways of backup, etc) I bought an external firewire HDD, since I believe it nicely fits my necessities. Next, after these holidays, I will finally replace my old HDD with a SSD one. I think 120 GB are ok. I just need the apps and small-sized documents (rather LaTeX, Matlab, word, pages or excel documents, etc. - no movies or mp3 (I have Spotify, for that) ). Large files (e.g. movies, pictures, etc) may end up in external firewire HDD.
    Now, let's consider the OS. I currently have 10.6.8 and I am very satisfied of that. I find it very stable, and all the apps I need are still well supported. On the other hand, given that there are like 5 years that I have the same installation, I may have a lot of obsolete files and setting that I can safely remove. This means that once I will have performed a backup of my documents, my email, my pictures etc. I can safely throw away all the rest. Hence, I may perform a brand-new installation of the OS. Although I am happy with 10.6.8, I was wondering if it is worth to upgrade it (I have a 2.53 Ghz Intel Core 2 Duo - 4 GB 1067 Mhz DDR3 RAM) to Lion, Mountain Lion or Mavricks. In that case, which would be the real benefits? And what about the cons?
    Finally consider that I only have the Leopard installation disks from 2008 (not even Snow Leopard) and I will bring my laptop to a techician to change the HDD (I know, it is simple but I don't have all the screws etc. and I will not buy them only for this purpose). Once he will have replaced the HDD, will he re-install the OS also? Or I have to reinstall the OS through my original DVD (5 years old, I don't even know if they still work) and upgrade to Snow Leopard again by myself? I would exclude the carbon copy solution since I may want to throw away a lot of garbage and perform a brand new instalation of the OS. How to proceed? Thanks again!

Maybe you are looking for