15MB raw image but only 256x192 size available

I downloaded raw images to aperture 2 before I added raw patch for Canon G10. After downloading RAW patch I can't view these images larger than 256x192 thumbnail size, but file size appears to be 15 MB. Can this be corrected?

Thanks, unfortunately it is not possible to do this since I've already formatted the card. I'm afraid I was hasty more than once during this process (new camera and software update). The only thing that gives me hope for a solution is that the file size indicates that the files are there, and when I use the loupe it only magnifies a small portion of the thumbnail as if it is seeing the image at full size.

Similar Messages

Hello i have ps elements 9 and im trying to update it so that i can open and edit my raw images but it says that some updates failed to install like 9.0.3 camera raw 6.5 and premier elements 9.0.1

hello i have ps elements 9 and im trying to update it so that i can open and edit my raw images but it says that some updates failed to install like 9.0.3 camera raw 6.5 and premier elements 9.0.1

Photoshop Elements is not part of the Cloud, I will move this to that forum
Photoshop Elements Forum http://forums.adobe.com/community/photoshop_elements
Select a topic, then click I STILL NEED HELP to activate Photoshop Elements Online chat
-http://helpx.adobe.com/contact.html?product=photoshop-elements or
http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html

As an asset management tool it should manage all images but only adjust raw

Is Aperture an image management tool, raw converter/workflow tool, or both?
Let it be both! Restrict what is is ALLOWED to ADJUST, but manage it all.
When I do a shoot, I start out with 300-1000 RAW images.
By the time I am finished with the client I will have narrowed the pile of image assets down to 20% of the original RAW files, JPGs of all of those, AND 10% of the selected originals will also end up as layered PSD/TIFF files. But when I go back in and want to open a PSD file then why not allow just that Then save it back as the same or a version..
OR when I tell it to open a PSD file in CS2 it will as "make a version(full or flat), or edit original?" and of course a "don't ask me again for this format" check box!
So why not leave the layered PSD/TIFF files alone and NOT allow them to be adjusted, only managed?
Think about it, IF I want to adjust my multilayered PSD file I will most definitely only trust that to CS2 where I retain full creative control over the layers, and I can output a version if I want!
IF I am crazy enough to feel the need to use the shallow tools of Aperture to tweak the brightness/level/curves/saturation/WB/etc/etc of a flattened COPY of my layered PSD file then I will make a copy and drag it into Aperture. By shallow I mean that CS2 and layers has much more control than the single layer tools of Aperture.
As an option leave it open as a configuration choice in the prefs... "Adjustable image formats: RAW, JPG" and even on a per image basis, right-click--> image status-->Adjustable or Unadjustable.
Yes, I sent this idea off to Apple!

Moki,
Right there with you. Here's my rough scenario:
1. I shoot 500 RAWs.
2. Cull down to 100 keepers.
3. Client culls down to their 50 selects.
4. Anywhere from 25-50 become layered PSD files, depending on the presentation the client wants (sizes, packages, borders, special effects, etc.).
5. In addition to those 25, there may be *completely new* composites (PSD's) created from combinations of the 25 -- this isn't a version of one of the original masters -- it is a *completely new* image that Aperture needs to manage in the project (so import of PSD without flattening and/or allowing Photoshop to Save-As into the Aperture library is a must).
I'd even add to your request about allowing adjustments. It would be totally cool if the adjustment tools were context-sensitive, enabled when working with an image (like RAW or JPG) where Aperture can adjust, and disabled when working with an image (like layered PSD or TIFF) that it won't adjust.
Anyway, I have complete confidence that eventually, the RAW conversion will be fixed, so even though that's an immediate glaring issue, it doesn't seem to me to be the long-term workflow killer. Being able to traverse this editing stage of the workflow with Photoshop is crucial. Without this, its basically
a complete project export after the initial organization stage, and the rest of the workflow is either managed entirely in another tool, or a complete pain to bring back into Aperture for output, which leaves files strewn everywhere for backup and archiving.
Brad

My Canon Rebel is no longer recording RAW images but set for RAW in manual mode.

I've tried changing memory card. My card's been recently formatted. I tried setting quality as RAW only not both RAW + Jpg...but still not getting RAW images in upload. Lightroom settings are fine and able to upload RAW from my Canon G12. I tried clearing setting but no affect. Is a factory reset a possible solution?

Debbie wrote:
Tahdah, tahdah and just plain dahhhh!!! I figured it out and if I share the answer I'll sound just plain stupid. But here goes in case someone else has the same problem, or should I say the same misunderstanding. In short, as it turns out I didn't have the quality set on RAW. I had checked, and rechecked the menu>quality window several times and each time misread it until I was just looking in the manual. In it the list of quality options is in a single column. In camera RAW is in a second column next to L with a quarter circle. I thought I had RAW selected. I'd been saying that the letter L was there. The manual, thank goodness, had the single column and said that was a JPG. Here I was reading about battery checks etc and there it was. I had been checking settings a while back and managed to change from RAW to JPG and not figured that I'd not changed back correctly. Whew!!! Call me dumb but I'm stupidly delighted right now ;o) Thanks to all those who tried to help.
OK, Debbie, maybe you'll feel better after I confess to doing something every bit as stupid. Recently my wife and I were driving home from a visit to our daughter's house in Philadelphia, and I used the opportunity to drop off my two 7D's and a couple of lenses at Canon's Jamesburg service facility for their usual cleaning and inspection. (I'm a CPS Gold Member, so it's an included perk.) I knew from previous experience that this would result in a partial clearing of the camera's user settings. Some items, like my name and copyright notice, would be left intact; but others, like my autofocus microadjustment settings, would be wiped. I was ready for that, had long since committed the AFMA's to a spreadsheet, etc.
But alas, I overlooked the fact that the quality setting that you cite above was one of those that would revert to its factory default. And the default is high-resolution JPEG, not RAW. (I always use RAW, and my favorite photo editor, Digital Photo Professional, does a crummy job on JPEGs.) So a week later I blithely walked into a moderately important photo shoot with one of my cameras set to JPEG. Fortunately, the other camera I was using, an almost new 5D Mark III, hadn't been to Jamesburg and was correctly set to RAW. But about two thirds of the photos I took were JPEGs, so I'll have to block out a few hours, sit down with Irfanview or some other editor, and try to fix things up. It doesn't much matter when I get it done, and the world won't come to an end, but it's pretty damned embarrassing.
So there you have it. We all make mistakes.
Bob
Boston, Massachusetts USA

4gig Mini empty but only 401 Mb available?!

I use my Mini to transfer files to/from work/home, so i fill it up regularly, but now it is empty (of songs & files) but only has 401 Mb available. I have v 1.4 on it, if that helps.
I have run Updater but both restore & update are un-clickable & greyed out.
PLEASE HELP!
TIA!

Hi, welcome to Apple Discussions!
Try to do these ops:
- hold for about 6 sec menu + center button
- do firmware updater
- remove and re-install iTunes
For more support visit: http://www.apple.com/support/ipod/
Hope I was helpful, bye!

.pdf prints very small - full image, but only quarter page

i have adobe reader 10.1.1 for mac. when I print, the full image prints, but is shrunk to the top left quadrant of the paper. I have tried to change page scaling settings. i have also changed advanced setting 'print as image', but none of this seems to work. i've spent endless hours on this and am hoping someone can offer a suggestion. this happens regardless of the original application (.xls, .doc, .ppt).

Here's your answer
http://forums.adobe.com/message/3810431#3810431

Deleted Disk Image but space is not available on hard drive

I was trying to share the iPhoto library across users by creating a Disk Image via Disk Utility.
It didn't go a planned as I needed more space than originally allocated. The resizing option in Disk Utility specified the Maximum Size was less than what I needed.
My next step was to delete this Disk Image, I believe I did this by selecting Edit > Delete
The Disk Image disappeared however the 80 GB never reappeared on my harddrive as available. I tried emptying the Trash but that did not correct the problem.
Any assistance would be much appreciated.

No the /Volumes folder twtwtw is refering to is at the top level of the root disk.
To see it open a Finder window and select the Go menu item
then select Go to Folder…
Now in the window that opens enter /Volumes
Then Go
the /Volumes folder will open. There should be no regular files or folders in there

Consumer producer - Acquisiton image but only producer loop run

Dear all
I try acquire and save image from Basler camera L301kc and NI PCe 1427 framegrabber. I create a producer/ consumer loop because the save take more time that the acquisition and if I do both in the same loop I lose frames. But I have problem: only producer loop run.
I have read all the threads but I didn't manage to solve my problem.
I have attached a VI code of how I was trying to do it. I am using LabView 2011.
Please any comments or help is deeply appreciated.
Thank in advance
XuanThuy
Solved!
Go to Solution.
Attachments:
Acquisition Image for Sample 03.vi ‏75 KB

Dear Kira T,
The producer and consumer loop has run but the Image Out in consumer loop is empty. Bruce attention to the error wire from the consumer loop wired to the destroy queue vi. But I don't find error.
I have attached a new VI code.
Can you help me ?
Thanks and regards
XuanThuy
Attachments:
Acquisition Image for Sample 03.vi ‏71 KB
Linescan camera setup Sub VI.vi ‏26 KB

I want to upgrade from snow leopard to Mavericks, but only Yosemite is available!!

How do I upgrade snow leopard to Mavericks on one of my older macbooks? I note that Mavericks is no longer available via the App store, only Yosemite, and I do not want the latter. My latest macbooks all have Mavericks pre-installed, and I want parity on all.

OS X 10.9 Mavericks is no longer an available, downloadable OS version.
You can choose to decide and download the free OS X 10.10 Yosemite OR pay to download either OS X 10.7 Lion or OS X 10.8 Mountain Lion.
Before embarking on a major OS upgrade, it would be wise, advisable and very prudent if you backup your current system to an external connected and Mac formatted Flash drive OR externally connected USB, Thunderbolt or FireWire 800, Mac formatted hard drive. Then, use either OS X Time Machine app to backup your entire system to the external drive OR purchase, install and use a data cloning app, like CarbonCopyCloner or SuperDuper, to make an exact and bootable copy (clone) of your entire Mac's internal hard drive. This step is really needed in case something goes wrong with the install of the new OS or you simply do not like the new OS, you have a very easy way/procedure to return your Mac to its former working state.
Then, determine if your Mac meets ALL minimum system install requirements.
OS X 10.7 Lion system requirements
Purchased emailed download code here.
http://store.apple.com/us/product/D6106Z/A/os-x-lion
To use OS X 10.7 Lion, make sure your computer has the following:
An Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
Mac OS X v10.6.6 or later to install via the Mac App Store (v10.6.8 recommended)
7 GB of available disk space
2 GB of RAM
To install OS X 10.8 Mountain Lion, 10.9 Mavericks (free upgrade, but currently unavailable) or OS X 10.10 Yosemite (currently available free upgrade) you need one of these Macs:
OS X 10.8 Mountain Lion purchased emailed download code here.
http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion
iMac (Mid-2007 or later)
MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
MacBook Pro (13-inch, Mid-2009 or later),
MacBook Pro (15-inch or 17-inch, Mid/Late 2007 or later)
MacBook Air (Late 2008 or later)
Mac mini (Early 2009 or later)
Mac Pro (Early 2008 or later)
Xserve (Early 2009)
Your Mac also needs:
OS X Mountain Lion, Lion, or Snow Leopard v10.6.8 already installed
2 GB or more of memory (I strongly advise, at least, 4 GBs of RAM or more)
8 GB or more of available space
Next,
If you run any older Mac software from the earlier PowerPC Macs, then none of this software will work with the newer OS X versions (10.7 and onward). OS X Snow Leopard had a magical and invisible PowerPC emulation application, called Rosetta, that worked seamlessly in the background that still allowed older PowerPC coded software to still operate in a Intel CPU Mac.
The use of Rosetta ended with OS X Snow Leopard as the Rosetta application was licensed to Apple, from a software company called Transitive, which got bought out, I believe, by IBM and Appe could no longer secure their rights to continue to use Rosetta in later versions of OS X.
So, you would need to check to see if you have software on your Mac that maybe older than, say, 2006 or older.
Also, check for app compatibilty here.
http://roaringapps.com/
If you have any commercial antivirus installed and/or hard drive cleaning apps installed on your Mac, like MacKeeper, CleanMyMac, TuneUpMyMac, MacCleanse, etc. now would be a good time to completely uninstall these apps by doing a Google search to learn how to properly uninstall these types of apps.
These types of apps will only cause your Mac issues later after the install of the new OS X version and you will have to completely uninstall these types of apps later.
Once you have determined all of this, you should be able to find the latest versions of OS X by clicking on the Mac App Store icon in the OS X Dock and then login to the Mac App Store using your Apple ID and password and if you purchased a download code, input that code.
You can then begin the download and installation process of installing the newer versions of OS X from the Mac App Store.
Good Luck!

Purchased whole album but only one song available for download

Some time ago purchased album Vēl Viena Klusā Daba by Prāta Vētra. From the whole album only one song is available for download.
Tried to delete and re-download. Remaining songs also not available under downloadable items.

Hey there Egils1969,
It sounds like you have purchased an entire album but for some reason only 1 song is available for download. I would report a problem with your purchase to the iTunes Store support directly with this website:
https://reportaproblem.apple.com
Thank you for using Apple Support Communities.
Cheers,
Sterling

How to i resize a larger 72ppi image to better quality smaller image but for correct size to paste into flyer

Hi, I am trying to resize a larger 16cm wide image saved at 72dpi to a smaller better quality 5cm wide image for invites for an art exhibition I am having. I figure there must be lots of information in the pic given that it is large, I just want to condense it into a smaller image. If I adjust the size to 5 cm wide it changes the dpi to 230 which would be better for printing (the 72 dpi is way too grainy). However when I paste it into the flyer I am making in photoshop it pastes as a massive picture. I then tried to drag the corners in to make it the right size and it became even grainier than a 5cm wide 72dpi image. I hope that makes sense to someone. So basically I need a 5cm wide document size that I can put in my small flyer that is the best quality I can make it! Thanks in advance!

Up-sampling from 72ppi to 300-600ppi can result in blurry images. It's always best to start with a good quality, high resolution image if you can. Go to Image > Image Size. When up-sampling, use Bicubic Smoother setting. When down-sampling, use Bicubic Sharper. See screenshot.
Nancy O.

IPod Appears to sync but only podcast are available

Hello,
My windows HD crashed recently, so i used yamipod to reload my music from my ipod back to my HD. My music is there and it shows in the itunes library;however, even after apparently syncing with my ipod ( which I restored) I all have on the iPod are my podcasts. Can anyone help me resolve this issue?
Thank You,
Rob

I am having the same problem... i went to the genius bar today and the guy connected it to the macbook and it worked fine, but i got a replacement for about 63 dollars and change... i get back home and try to sync the music and once again, only about 10 second sync before it stops...

In PS CS5, i can preview raw image but am not able to with PS CC! here are the examples attached

this is photoshop cs5 ^^
this is photoshop cc :

That is correct the was removed. Adobe stated the were using and unsupported Microsoft interface. To hel with the problem I purchases FastPictureCieder Codec packafe. It will generate Thumbnails for RAW and PSD file in Microsoft dialog when you select to view the list of file that way. Its less the $15.00 you can see at least 3 PSD thumbnails here and a CR2 RAW thumbnail. Windows can also show a larger thumbnail in a right side panel

CC package built & deployed but only trial versions available

I am trying to build and deploy CC packages for 4 members of a team, I have built & deployed 1 package but the apps are trial versions, first thing i want to do is change trial versions to the full versions we are paying for.
Forgive me but i need a really basic step by step "how to", i am a photographer not an IT specialist.

Hi Paul,
If you have created package using "Serial number workflow" then you can fix it by creating "License file" using Creative Cloud Packager.
Creative Cloud Help | Create license file
Hope this helps.
Regards,
Sumit Singh

Backup requires 1099GB , but only 300GB available !

I have at least figured out part of this problem. First I get the message:
"Are you sure you want to back up on the disk your original data is on."
But I am choosing the first partition of Bay 2 HD which is a 1TB partitioned into 2 500GB's.
I have a Bay 3 HD which is configured the same.
I say yes I am sure. Then I try to backup and I get the message:
Backup requires 1099GB, but only 300GB is available. I have computed the data on all 5 volumes and it turns out to be 1099GB. The 5 volumes are my main HD which is 500GB, and the 4 partitioned volumes in Bays 1 and 2. This is a total of 2500GB of which 1099GB is used.
Time Machine is trying to backup all 5 volumes on the selected volume. What can I do about this?

I did find one little glitch. If I mount an external drive for backup, etc. and the Time Machine is due to run, and the drive has enough data to put me over the limit of my target volume, then the Time Machine attempt fails. Not so bad, except all the Time Machine backup data is lost. The most recent is still there, but all past data is gone.
What is causing this?

15MB raw image but only 256x192 size available

Similar Messages

Maybe you are looking for