17" Cinema Display doesn't work with new MacBook Pro

I have used a 17" Cinema Display with a MacBook Pro without problems for the last year. I just bought a new MacBook Pro and a Mini DisplayPort to DVI Adapter. Hooked it up and no display. Reconnected to my olf MBP without the Mini DisplayPort to DVI Adapter and it still works great. Any thoughts?

I have the same machine and the same drive (for about 6 months) they work fine.
The first suspect is the internal SATA cable, replace it.

Similar Messages

Apple 23" HD Cinema Display no longer working with new Macbook Pro

I bought a 23" used HD Cinema display the other day along with the ADC-DVI and DVI-Mini Display adapters. I had it hooked up and it was working perfectly for 3 days. Today my wife tried to connect her Macbook accidentally via the USB that is part of the ADC-DVI adapter which didn't work (why is that USB there anyway?). Then when she went to connect the external display back to my Macbook Pro it did not wake up after being connected. I have tried resetting the PRAM on the MBP and have disconnected and re-connected all connections but nothing will get the display working with the MBP anymore. When I connect and disconnect the mini-display plug into the MBP the MBP flashes the blue screen as it appears to be reacting, but that's it. I can't detect any display when I go into the display system preferences. Does anyone know how I can get the Apple Cinema display working again? Thanks for any help.

Ryan Nagy wrote:
Upon reflection, I think my issue is different. Probably should not have posted it here. As it turns out sometimes my display works, sometimes it does not. I think the power adapter has gone bad. A common occurrence here in Mexico where the power can fluctuate quite a bit. - Ryan
There are couple of long threads in the display section about problems with the power supplies on the 23" HD DVI. See this one for instance: https://discussions.apple.com/message/17981683#17981683
Mine one day just wouldn't turn on -- connected to an old G4 MDD and the Mini -- a bit of fiddling it would occasionally start up, sometimes not. Similar to what you described, the Macs would see it in System Profiler, but it just wouldn't turn on.
Based on that thread, I figured the problem was mostly likely the power supply. A local authorized repair place didn't have a spare for me to try, but the tech sniffed it and mentioned it the burnt electronics smell. LOL, I sniffed it and sniffed the power supply for my 20" DVI Cinema display -- indeed a weird smell.
Based on that thread, I decided to bite the bullet and buy a beefier 150" power supply for the 30" Cinema display, which Apple says in compatible with the 23". See: http://support.apple.com/kb/HT2803
I hooked it up, crossed my fingers, and it fired up right away. It's been working fine for about 3 months now. Cheaper than buying a new monitor.

Is there a compact flash and SDXC card reader with USB3 and or thunderbolt connections that will work with new MacBook Pro retina laptops running OSX Mavericks please?

Is there a compact flash and SDXC card reader with USB3 and or thunderbolt connections that will work with new MacBook Pro retina laptops running OSX Mavericks please?

Yes, I too had this problem.
I was issued an update from Apple for a new version software as well as a new version of Lightrooom and now it shows up on the desktop and in finder as it should.
MacBook Pro Retina running 10.8.2 (12C54)
Lightroom running 4.1
Hope that helps.
aa

Cinema Display (A1081) Wont Work with NEW 2011 Mac Mini

Cinema display (A1081) woks fine with 2006 Mac Mini (has a DVI Connector on back) However same display does NOT work on mac mini 2011 (using Apples HDMI to DVI cable provided)
It shows in the ABOUT Displays, but seems to not get a signal from the mini,,,
Same 2011 Mini works fine with other DVI monitors
Any thoughts?
Thanks

I've got the same problem... is it the dvi-d???
i'm using a dvi-d-single linK do I have to use a dvi-d-dual link
Greentechlabs... Did you solve your problem?
Thanks
Renegabriel

Will a Mini-Displayport to VGA adapter work with new macbook pro 2011

I was thinking of getting a mini-displayport to vga adapter for my external monitor I wanted to hook up but I wasnt quite sure whether it would work as my macbook pro has the new thunderbolt port, I was confused if the new port would only work with the thunderbolt displays. Could anyone help me as I'm not too sure what will work.

I tried the Apple miniDisplayport to VGA in a Thunderbolt MBP and iMac and they both worked. Same for the Apple miniDIsplayport to DVI.

WD External Hard drive not working with new Macbook Pro

I have recently upgraded to a new Macbook Pro and when connecting a WD 1 TB Passport external hard drive, it doesn't appear on the MBP, but when I connect it to my old Macbook running 10.5.8, it appears normally. Is this a problem with formatting or an issue because it is USB 2.0...
Any help appreciated as I have a lot of data on the hard drive and would like to be able to use it with my new MBP.

I'm on Lion, with similar issues with two WD external HD. But what I found fixed the problem was to:
1. go to the manufacturer's website (in this case Western Digital),
2. locate my external HD, download the download.
For instance, I downloaded the WD Drive Utilities for Mac (for My Passport for Mac USB 3.0):
http://support.wdc.com/product/download.asp?groupid=219&sid=157&lang=en
Install the downloaded app.
3. Plug in external (this part, I think is important) directly into your tower or laptop (as opposed to through a USB multi-plug extender). Possibly this is because you access more power?
[I'm trying to remember in which order everything happened. But I think at this point the external hard drive mounted]
4. Install the software that is found on the external HD (in my case, it was a brand new device, so that had never been installed).
5. Run "WD Drive Utilities" and run diagnostics.
6. Test to see if it holds. Unmount the External HD. Unplug. Replug in and see if it mounts.
Note: I have not yet tested to see if plugging in the external somewhere other than directly into the tower also works. But I think the main problem is getting it to mount the first time and installing the software. That's what I think.

Toneport UX2 not working with new MacBook Pro 10.6.2 Snow Leopard

I do some casual recording using a Line 6 Toneport UX2. Previously i was recording on an older Mac Mini. Recently i upgraded to a new Macbook Pro (Snow Leopard 10.6.2)
The new Macbook is not responding at all when i plug in my toneport, all the software for the toneport is installed.
I think the problem is that my toneport is not compatible with an intel Mac. Is this right?
And if it is can i fix this problem with some kind of upgrade for my toneport software(gearbox)?
And if there is no solution can someone recomend a new audio interface for me to get? Under $200.

I use a Toneport UX2 with my intel iMac. I never had the problem you are describing while using Gearbox with GB. However your problem sounds very similar to one I have experienced when I loaded up Line 6 Pod Farm. I discovered that when I start Pod Farm and get the message you mentioned, if I quit Pod Farm then immediately start it again, everything communicates just fine and I'm back in business. I would like to see a fix for this glitch, but for now I just start twice and then get to work.
Give it a try! I am curious to know if you are in the same boat as me.
As a side note, Recently Line 6 offered Pod Farm for no charge to registered owners of a Line 6 interface such as ours. You may want to check it out. It gives you some more options to play with.

Motion not working with new MacBook Pro

I've installed the Production Bundle on a new MacBook Pro 2.5 GHz Intel Core 2 Duo. Everything works fine, FCP, DVDSP, Compressor but Motion crashes every time with an error message:
"The problem may have been caused by the Ozone plug-in"
Reinstalled software and still have same error msg.
Any one have similar issue with Motion? Any ideas on how to fix?
Thanks in advance.
_john

It's easier for me to just point you here:
http://www.applemotion.net/Troubleshooting/Troubleshooting.html
but it's on my site where I also promote my books and training products so I have to provide this disclaimer:
"I may receive some form of compensation, financial or otherwise, from my recommendation or link"
I consolidated all the info I could gather from these forums on this issue because it arises so frequently.

Question on how networking works with new Macbook Pro

Hi,
I have a question about how networking works with my new Macbook Pro. This is my first laptop so am new to mobile computing. I am about to configure it to replace my desktop which uses a wired DSL connection. Once I have my Macbook Pro configured to run off the DSL modem, what happens when I take this computer to a location that has ethernet? Will just plugging in the ethernet cable be enough to get on line? Or is there further configuration work that needs to be done?
I used a Windows laptop from work and all I had to do was plug it in to a hotel ethernet cable to get on line. However, this laptop was never configured to run on my DSL network so I am not certain if that makes things more complicated.
Thanks for your help!

Hi
Your MacBook Pro should just work when plugged into an ethernet connection.
Just check something, Open Network Preferences, you can select it from the Airport icon in the menu bar.
In the left-hand pane click on Ethernet and just check that it is set to configure using DHCP in the right-hand pane, that's it.
So when you plug in the ethernet cable it will ask the router for an IP address and off you go.
I assume that any system you plug into will use DHCP rather than static IP addresses. If it is a static IP address, you will need to manually configure the ethernet settings by inputting the IP address and subnet mask info plus DNS servers.
Usually it is done with DHCP and you don't have to do a thing and likewise your home DSL is DHCP?
If not then you will have to change your settings, make a 'Hotel' setting which you can use when in hotels and keep your 'Home' set-up for when you are at home. In the pull down menu select Edit Locations to add new ones.
Phil
Message was edited by: Philip Tyler

ITunes match isn't working with new Macbook Pro

Hello everyone,
I have had iTunes Match for years with no problems on any device mobile or otherwise. I just purchased a new Macbook Pro w/Retina. I unboxed, powered up, and updated all software. I set up the Macbook with my one and only apple ID and logged into iTunes with the same ID. All of my purchased music is available, however when I go to turn on iTunes match I get this error: "THIS COMPUTER IS ALREADY ASSOCIATED WITH AN APPLE ID. You can use iTunes Match on this computer with just one Apple ID every 90 days. You cannot associate this computer with a different Apple ID for 90 days.". After this I have no other option but to close the window. I have tried logging in and out and restarting the computer but have had no success. Any help would be appreciated.
Thanks

Hi
i ii suugest you contact Apple support Contact Apple for support and service - Apple Support
JIm

Display not working with new Macbook pro

My son gave me his 1 year old Macbook pro 6 and in connecting it to my Apple cinema display it gets all these horizontal broken red blinking lines across the whole screen. Disconnected and reconnected the new adaptor I bought and it seemed fine till i tried to begin work and the lines retruned.

Hi there shelley99,
The behavior of multiple displays had changed in OS X Mavericks. I would recommend reviewing the information in the article below.
OS X: Using multiple displays in Mavericks
http://support.apple.com/kb/HT5891
-Griff W.

Thunderbolt to Ethernet Adapter doesn't work with Retina MacBook Pro

I can't seem to connect to Ethernet with my Retina MacBook Pro. I bought an adapter and when I plugged it in, the network setup assistant showed that I was connected to the internet but my web browsers (Safari, Firefox and Chrome) couldn't connect, nor could any other programs (like Mail). The error message said that my computer was not connected to the internet, which did not match what Network Diagnositcs said. After a phone call with Apple Support, I had a replacement adapter mailed to me. With the new adapter, my computer now says that it is connected to the internet and I even have an IP address, but programs still can't connect and I get an error message saying the DNS lookup failed. This happens even when I manually enter the DNS server. I have already tried running the Thunderbolt software update 1.2.1 as well as the recent Thunderbolt firmware update, but the installer says they are not compatible with my computer. The problem occurs for both Thunderbolt ports. Is anyone else having this issue? I have no problem connecting to WiFi, so my temporary work around is using internet sharing on my old MacBook, which can connect to the ethernet connection in my apartment with no problems.

Hmm. Well I tried rebooting with wifi off but that didn't fix things for me. Would you mind sharing what your System Information says under Thunderbolt? This is what mine looks like:
MacBook Pro:
Vendor Name:          Apple, Inc.
Device Name:          Macintosh
UID:          0x0001000D1290C120
Firmware Version:          11.1
Port:
Status:          No devices connected
Link Status:          7
Link Controller Firmware Version:          0.11.4
Port:
Status:          Connected
Link Status:          2
Link Controller Firmware Version:          0.11.4
Thunderbolt to Gigabit Ethernet Adapter:
Vendor Name:          Apple, Inc.
Device Name:          Thunderbolt to Gigabit Ethernet Adapter
Vendor ID:          0x1
Device ID:          0x8003
Device Revision:          0x1
UID:          0x000100020059EBB0
Apple Serial Number:          DTN224606LWDWKHAX
Route String:          3
Firmware Version:          5.5
Port:
Status:          Connected
Link Status:          2
Port Micro Firmware Version:          0.0.8

How do I get usb superdrive to work with new macbook pro. superdrive rejects cd ?

Just purchased new system. (never had an apple before) so I am all at sea. followed the instructions to uodate the system. whenI inserted a cd with program to be installes foe a Mac, it was ejected. inserted a cd with 'jpeg files only on it it too was rejected, with no message. Am I missing anything?

I suggest you return the Apple Superdrive and buy any other brand external DVD drive that connects by USB port.
Any brand will work with your Mac, cost less and work better.

802.11n Enabler Doesn't work with 17" MacBook Pro (2.16) Intel Core Duo

While I would believe that the computer does meet the requirements and that it does have the extreme card and after following the instructions -- checking the network utility ap, etc. It is very strange that you get a "Alert: Your computer does not meet the hardware requirements for this update." So you don't think that I am a fool, I did check the Network Utility and there is no "n" so it was never updated.
Is there any way to do this manually?
Thanks in advance.

The Core Duo machines don't have the newer Extreme card whose chipset supports 802.11n.
You can do some potentially warranty-voiding surgery, however, to replace the MBP's stock card with the Mac Pro Airport Extreme Upgrade card, which supports 802.11n and is plug-compatible with the MBP's stock card. It's available for $49 from places like PowerMax and Small Dog.

ViewSonic VA912b not working with new MacBook Pro i7

Hi --
I just received my new MBP on Wednesday, along with it I purchased the Griffin Video Display Converter (http://store.apple.com/us/product/TY600VC/A?fnode=MTY1NDA3Ng&mco=MTY4NzA5MDY) so I can use the computer with my ViewSonic VA912b 19" monitor w/ DVI at my desk, and my television w/ HDMI in the living room. I've plugged the monitor into the adapter and nothing is happening after hitting 'Detect Displays' in the Display menu. For the computer I had prior to this (2007 MBP), I had no problems hooking up this monitor and it would automatically find it. I looked through the user's guide and did some searching on the web and I'm finding nothing about this topic...does anyone have any insight into this?
Thanks in advance!
Kristina

Hi Kristina,
I represent ViewSonic and would be happy to assist. At your earliest convenience please contact us at 1-800-888-8583. In addition you may contact us via our web site self help support www.viewsonic.com/support. Please ask for Tito M.
Best regards,
Tito M.

17" Cinema Display doesn't work with new MacBook Pro

Similar Messages

Maybe you are looking for