17" MacBook Pro Display stopped working

Hello,
I have a 17" 2.6GHz Intel Core 2 Duo MacBook Pro (purchased January 2008) and the display stopped working today. There is no light behind the Apple logo on the back or the display. The little white light by the latch works as normal, and I can hear the disk spin up when I power it off and on using the power button.
When I connect to an external monitor, there is no signal. When the machine is powered on, I can see the drive on the network. I have also tried booting up using an install CD as well, but no luck.
Yesterday, I updated all my software applications and did all the Apple software updates, everything worked fine. I am still on Snow Leopard, version 10.6.8.
Any suggestions? Is it toast?

Went to the Genius Bar yesterday. It's part of the NVIDIA issue.
http://support.apple.com/kb/TS2377
They had the part in stock should be able to repair it in 1-3 days.

Similar Messages

HDMI port on Macbook Pro suddenly stopped working. How much is it to fix?

HDMI port on Macbook pro suddenly stopped working. Is it expensive to fix?

No one here can tell you what the prices are to repair things. We are just users such as yourself.
What makes you think your HDMI port is dead?
You can take it to a Genius Bar for a FREE diagnosis, make an appointment first.
http://www.apple.com/retail/geniusbar
Also check system preferences/Displays make sure that you have all the correct settings.
Check that the cable you are using is good.
Make sure the display you are connecting to is set correctly.
Check here:
http://support.apple.com/kb/ht1573
Try resettind SMC:
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
. RESET PRAM:
Shut down your Mac.
Locate the following keys on the keyboard: Option, Command (⌘), P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on your Mac.
Immediately press and hold the Option-Command-P-R keys. You must press this key combination before the gray screen appears. Continue holding the keys down until your Mac restarts, and you hear the startup sound for the second time.
Release the keys.

Iphoto on my macbook pro has stopped working. It comes up with a message saying that the library is either being used by another user or it is unreadable. Any ideas why I should be receiving this message?

MacBook Pro 2009
Model Identifier: MacBookPro5,1
Processor 2.4 GHz Intel Core 2 Duo
Memory 4 GB 1067 MHz DDR3
Software OS X 10.8.5 (12F45)
Iphoto '11
Iphoto on my macbook pro has stopped working. It comes up with a message saying that the library is either being used by another user or it is unreadable. Any ideas why I should be receiving this message?
"Your photo library is either in use by another application or has become unreadable"
Offered solution doesn't work:
Shut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this, quit iPhoto, and then reopen it while keeping the Option and Command keys pressed. You can also try restoring your photo library from a backup.
I have already copied my photographs to the a library manager but when I tried to reuse iphoto and import the photos back into iphoto, it would not let me.
I can't download photographs from my iphone or my digital camera.
Any ideas on how I can solve this problem?
There is a possibility that when I went to update applications that I started to install Mavericks which I then interrupted and cancelled. I am not definite that this caused this problem but it was at about the same time as when this problem started.
Many thanks,
Ed

I have already copied my photographs to the a library manager but when I tried to reuse iphoto and import the photos back into iphoto, it would not let me.
You can't "copy" your photos to the "library manager", there is just no way to any such thing.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

My Macbook pro 17" stopped working

my Macbook pro 17" stopped working I was surprised that Apple told me they no longer have support the 17" Macbook pro

That may be discontinued. I can't find a reference anywhere saying if it's still supported or not. The best I can offer is this site where you put in the serial number. It provides all the details on the machine, including whether it's still supported or not. What's wrong with it?
http://www.appleserialnumberinfo.com/Desktop/index.php

Macbook pro speakers stopped working, earbuds fine

My macbook pro speakers stopped working, but the earbuds work fine. Tried restart and preferences. Volume icon is grayed out, except when earbuds are plugged in. What am I missing?

Look in the audio output port. If there is a red light, the internal switch is stuck. Insert the earphone jack a few times. Blow into the port as hard as you can. Use a toothpick or something similar and jiggle it inside the port. If no success, bring the MBP to the Apple store genius bar.
Ciao.
If there is no red light, try a PRAM reset:
http://support.apple.com/kb/ht1379

Elements 11 on macbook pro has stopped working and i can't re-install as its no longer available?

Elements 11 on macbook pro has stopped working and i can't re-install as its no longer available?

Further info:
Running on a macbook pro.
Purchased through the apple app store.
Worked fine prior to mavricks update.
I have read where others have had this issue, the general response has been that they have had no support from adobe in resolving the problem. One guy said he managed to get issued a new download of the softwear that works fine with mavricks.
so there is a fix avalible but for some reason its not been a general update for all customers with premier elements 11?

I just had 2 MacBook pro's stop working completely. No previous issues. Won't even turn on when plugged in.

I just had 2 MacBook pro's stop working completely. No previous issues. Won't even turn on when plugged in. Any ideas?

See if a SMC reset will breath life into them:
https://support.apple.com/en-us/HT201295
If not, make an appointment at an Apple store genius bar for a FREE evaluation. Warranty status is irrelevant.
Ciao.

My macbook pro wifi stop working suddenly, and know appears a X on the wifi icon, what may have happened?

Hello,
My macbook pro wifi stop working suddenly, and know appears a X on the wifi icon, what may have happened?
Its seems to be the harware.

Hello raphaelitajuba,
The article linked below provides information regarding this indicator and steps that can help restore functionality to your MacBook Pro's Wi-Fi.
AirPort has detected a problem with the driver or a necessary sub-system component, apply the latest manual AirPort software update or reinstall Mac OS X. If reinstalling Mac OS X does not correct the problem, take your computer to an authorized Apple service center.
The AirPort status menu (AirPort Menu Extra) FAQ
http://support.apple.com/kb/HT3821
Cheers,
Allen

What could cause my MacBook Pro to stop working completely?

What could've caused my MacBook Pro to stop working completely?

Who knows. Dead battery for example. You provided no details. Please detail ALL you have done so far in the way of troubleshooting? Need this info to avoid the been there done that scenarios.
Which model MBP do you have? Care to share which OS you are using?

I was using Safari , 5 tabs open, when my macbook pro just stopped working .What can i do ??

I was using Safari , 5 tabs open, when my macbook pro just stopped working .What can i do ??

Press the Power button for about 10 seconds to shutdown the computer. Wait a couple of minutes then restart. If it restarts OK, then immediately repair the hard drive:
Repair the Hard Drive and Permissions - Mavericks, Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.

I have a MacBook pro that stopped working - mother board issue?

I have a MacBook pro that stopped working. Was told the mother board is bad. However, it still turns on and makes the normal start-up noises, DVD works and ejects, etc. - only the screen is out. Does this sound like a mother board issue?

It is a 15" MacBook Pro purchased new in October 2007. It has a 2.2 GHz Intel Core 2 Due processor with 4MB shared level 2 cache, 2GB SDRAM, 120GB hard drive, and a NVIDIA GeForce 8600M GT with 128MB of GDDR3 SDRAM.
I read in another thread that there was a problem wiht NVIDIA video cards. Could this be the case with this computer? In the thread, the person indicated that NVIDIA was fixing these issues under warranty.
I was told by the Mac repair tech (not an Apple store) that the new motherboard would by $700 and not under warranty.

Macbook Pro battery stopped working after water spill.

Hello,
I own a Macbook Pro 13 inch mid 2010 that suffered water damage, after that it stopped functioning so I unplugged and plugged again the battery, the computer than turned on and now it's working well. The only issue I'm having is that now it only works when connected to a power source, there is a message telling that my battery has to be replaced (Condition: Replace now). My question is: If I replace the battery would the problem be solved or it may be a problem in my logic board due to the liquid spill? Can anyone help me?
Battery Information:
Model Information:
Serial Number: 9G01804RUD3MA
Manufacturer: DP
Device Name: bq20z451
Pack Lot Code: 0
PCB Lot Code: 0
Firmware Version: 201
Hardware Revision: 2
Cell Revision: 158
Charge Information:
Charge Remaining (mAh): 0
Fully Charged: No
Charging: No
Full Charge Capacity (mAh): 0
Health Information:
Cycle Count: 231
Condition: Replace Now
Battery Installed: Yes
Amperage (mA): 0
Voltage (mV): 4064
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 0
Display Sleep Timer (Minutes): 10
Wake on AC Change: No
Wake on Clamshell Open: Yes
Wake on LAN: No
Current Power Source: Yes
Display Sleep Uses Dim: Yes
PrioritizeNetworkReachabilityOverSleep: 0
Battery Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 2
Wake on AC Change: No
Wake on Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
ID: 0x0100
Wattage (W): 60
Revision: 0x0000
Family: 0x0085
Serial Number: 0x00a1c4ce
Charging: No

You have "killed" your Macbook.
If you let it dry out, it MAY start working again, but if it does, this will inevitably be temporary as corosion sets in and does futher (and almost certainly terminal) damage.
The only benefit of letting it dry is that IF it works again, you will be able to save what is on the HDD. Only important if you don't have a backup.......you DO have a backup don't you???
Irrelevant whether you have AppleCare or not - water damage isn't covered. And the cost of repairs is likely to exceed the value of your MBP. It is worth taking it in for a free evaluation of the cost of a repair.
Your best option may be to sell it for spares and invest in a new computer - which will be kept a long way from any drinks or other sources of liquid damage!

IMessage on MacBook Pro Randomly Stopped Working

So I recently purchased a Macbook Pro 15" for college. I set everything up and it was working perfect until a few days ago. When I try to send a message on my macbook the person's name I am sending it to is blue for a second but quickly changes to red but I know they are using iMessage because I am iMessaging them off of my iPhone. Also, when I try to facetime someone from my macbook it works perfectly and I can receive facetimes too. I honestly have no idea what could have happened and I feel like I have tried every single fix for this issue.
Some of the fixes I tried:
Logging out of iMessage on iPhone and then logging back in
Deleting preference files (This is a huge confusion for me, I simply don't have the files. Ex: com.apple.imservice.iMessage
I've tried editing the preferences on my macbook and iphone
If anyone of you have any ideas or a fix, I am willing to try everything at this point
Oh also, I recently switched from my 5c to a 4s because water damage completely ruined my 5c. Not sure if that could be an issue

Hi,
Open Messages.
Go to the Preferences > General Section.
Tick the line "When I Quit, Set the Status to Off line"
Now Quit the App This will stop the IMAgent app for trying to re-open the app if it "hears" incoming messages on any of the services you log in to.
Open the Activity Monitor (Applications/Utilities) and find the imagent item in the list (in will be in lower case and will have no icon)
Highlight and use the Quit button top left and confirm Force Quit.
It is likely to restart straight away (but as the Messages app is Quit it should leave it alone and free app access to the .plist.
Try deleting the .plist now.
NOTES.
Messages is a multi- windowed App and closing a Window using the Red Button on one of them does not quit the app.
you have to use the Menu item or Click and hold the DOCK item to see the Quit Option.
There is no indication in any of the Windows when the iMessages account is active and Logged in.
If the Buddy lists (AIM, Jabber and Yahoo plus Bonjour) are active but not shown they are still logged in and IMAgent comes into play (As do the com.apple.iChat.(service name).plists).
8:44 pm Friday; September 12, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Macbook Pro wifi stops working, won't turn back on, requires restart to fix?

So for the last two days my Macbook Pro's being doing something very strange. At random times, the wifi will just stop working (as in it thinks I have wifi but no webpages load anymore and my dropbox can't sync) and when I go to turn the wifi off and back on (in an effort to restart the chip thinking it would solve the issue), it won't turn back on. I go into the System Preferences, hit "turn wifi on" and nothing happens. I hit it about 10 times and that does absolutely nothing. I've then tried putting my mac to sleep and waking it back up, which delivers even stranger results; The wifi turns back on, but can't find any networks, both using scan and manually inputting the details of my network. So far the only fix for it is to just restart my Mac and then the wifi works just fine like nothing ever happened (until it happens again, usually a few hours later). I'm currently running OS X Mavericks 10.9.4 on a 15" early 2011 Macbook Pro (MC723LL/A) with 2.2 GHz quad-core i7 and a 1TB Samsung 840 EVO SSD. The most recent modifications I've made are just installing GDB debugger and creating a custom certificate for it to be able to run Eclipse C/C++ IDE on my Mac, but I seriously doubt that would have caused the issue (especially since that was running for a few days before this happened). Has anyone else had a problem like this?

So many people are having this problem. I believe I have solved it. I posted it on another thread, but I will post it here:
First - let me say that I tried trashing the bluetooth preferences and restarting. That worked for about 10 minutes, then I also tried reorder the connections in Network Preferences, that didn't do much either.
Here's what worked: Open System Preference, click on "Energy Saver", uncheck "Wake for network access". This has totally worked for me. I connect flawlessly and immediately to my network and to my printer.
My order of connectivity of network devices is still ordered where Bluetooth is near the last of the devices. But really, try deselecting "Wake for network access"

My Macbook pro has stopped working and the screen has turned blue on static mode

My Macbook pro 8.1.1 has stopped working and the screen has turned blue on static mode.
I have tried restarts many times but of no Use
Regards
Nawabdera

Try SMC and PRAM resets:
http://support.apple.com/en-us/HT201295
http://web.archive.org/web/20140711222006/http://support.apple.com/kb/ht1379
Then try a Safe Boot:
http://support.apple.com/en-us/HT201262
Any help?
Ciao.

17" MacBook Pro Display stopped working

Similar Messages

Maybe you are looking for