1st gen ipod touch will not work with new iTunes 11.help!

1st generation Ipod Touch.  I ran an update on my ITunes on my PC, and my IPOD will no longer connect to my itunes.  Please help.  If at all possible.

iTunes 11 works with all model iPods.
If you  have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
iOS: Device not recognized in iTunes for Windows

Similar Messages

  • My 4th gen ipod touch will not work in a philips or Sony docking station

    I bought a philips(DC320) clock radio and my ipod touch would not work in it.  Thinking it was a problem with the connector on the radio I returned it and bought a Sony ICF-CS15ip because the store was out of the philips radio.  When I plugged my 4th gen ipod touch into that again my Ipod touch would not play through the radio but the radio would recognize and charge the ipod.  I tried my daughter's 2nd gen ipod touch in the Sony and it worked great.  So It looks like there is a problem with the my ipod.  Sony claims that the ICF-CS15ip is compatible with the 4th gen ipod touch and I have the latest IOS 5.1.1 on my ipod.  Any suggestions before I go to the Apple store?  The Ipod is only 6 months old.

    You can try the standard fixes:
    - Reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPOd.
    That has worked for some users.
    However, sometimes an iOS update will break compatibility. In that case yo have to wait for either Apple or the dock manufacturer to issue a firmware update.

  • My 4th gen iPod Touch does not work with Ford sync since updating OS

    When I updated my iPod to the new os, it does not work with my ford sync system anymore. how do I fix this?

    Have lots of issues with Fords MySync and here's some info that might help....
    Using ford sync interface, goto the phone section, then settings, and look if your iPhones name is listed, if so select the phone name thru sync interface and remove/delete it from the sync list, then go thru the Bluetooth pairing process again.
    If that doesn't work, do the same on the iPhone, select ford sync entry in Bluetooth and remove sync or forget this device on the iPhone and then go thru Bluetooth pairing again.
    If that doesn't work Power off iphone ( not sleep) hold power button till you see red slider to power off. Then restart iphone, try pairing up again.
    If that doesn't work go back to MySync and goto phone settings and use the up-down slider till you see sync master reset. Confirm then go thru BT pairing again.
    If that doesn't work there is a fuse for the my sync system. Fuse box is usually behind kick panel of front passenger seat side for the Mustang #3, its behind a paper black cover. Remove fuse for 5-30 secs then replace.
    Lastly, make sure your MySync Firmware is the latest vers. Mines 4.0.2 goto fords MySync support page to check
    http://www.ford.com/syncmyride/
    or call 1-800-392-3673 Opt 3
    A google search might help for your model and year if not a newer mustang and you couldn't get to ford.
    Good Luck

  • IPhone, iPod Touch will not work with Skullcandy Icon2,  Icon 2

    I pulled my Skullcandy Icon 2 's out for my ski trip and found that the mic and control had stopped working with my iPhone. Thinking that the Mic/Button had broke I went out and picked up a new pair, which also didn't work.
    Both sets of head phones were tried on an iPhone 3g, iPod Touch 1st Gen. and iPod Nano 3rd gen. None of which would allow control of the devices in music mode or call answer.
    To rule out a defective headset, I connected them to my friend's phone, a HTC Hero. The controls on the Icon 2 would play and pause any music program, including Pandora including controlling calls, (answer, mute and hang up).
    I haven't found anything other then lint in the head phone jack to as a solution to this. (not a solution for me).
    If anyone has any suggestions please let me know.
    Hardware Info:
    Skullcandy Icon 2 Purchased 2009-2010
    Skullcandy Icon 2 Purchased 12/2/2010
    iPhone 3g Software version 4.2.1
    iPod Touch Software version 3.1.3
    iPod Nano 1.1.3

    Has this worked for you in the past? I am under the impression that your units are older and do not support this functionality. See <http://support.apple.com/kb/HT3310>.
    I'm interested in what you find out
    Allan

  • My iPod touch will not work with my ubox-f-1107 after updating to iOS 5.1.1

    I have a Citroen C4 Grand Picasso 2008, I bought the UBOX-F-1107 and had it installed by the dealer here in Spain so that my Ipod touch would work and charge in my car! It worked great until I updated to the ios 5.1.1, now it does not work!!! After I plug it in it powers up, and shows Device Connected on the Ipod screen, but thats it, will not play music at all!! Please HELP!! Thanks

    In order to use iMessage efficiently, add the country code to the mobile number prefix by of your contact and their iMessage ID. You will notice then when selecting the contact name in the TO, the green shade will turn into blue shade. It means your message will be sent as iMessage. Notice if you are sending message to non imessage user, the shade of the contact name is green. It means the message will be sent as text message.

  • 1st Gen Ipod Touch will not charge...arghhhhhh!!!

    I have been trying to charge my ipod touch for days now. It will do everything except charge. When I plug it into my mac the battery symbol shows the charge indicator for a couple of minutes then changes to the fully charged symbol, but the battery remains only 10% charged. After a few more minute it then switches itself off. Occasionally the battery indicator will show up as 50% charged but if I switch it off and on it goes back to 10% very frustrating.
    I have tried charging it overnight using 3 different USB cables plugged directly into my Mac, a firewire mains adapter and 2 different Ipod Speakers still nothing.
    I have restored it a number of times to the original settings and have upgraded to 3.0 to see if that would fix it all to no avail.
    Can someone help me pleaseeeeeeeeeeeeeeeeeee!!!
    Message was edited by: CarlSmith74

    Is it quite easy to replace them?
    I suppose it is 'for one skilled in the art' - if you didn't get Applecare and are out of warranty, do a little Googling and you will find several places that do touch battery replacement.

  • My 4th gen iPod touch will not work. The unlock screen comes up but dosent do anything because its is frozen. the after 5 to 10 seconds it looks like it will shut off but that also freezes. After a few seconds it goes back to the unlock screen. Help!

    I dont know what to do I need help to fix this, my entire life is on that thing!

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • TS1424 My 1st gen ipod touch will not synch new apps that i want and get rid of the ones i dont want on my ipod...

    I really need help!!!! im trying to get the apps i want that i know are compatiable with my ipod touch onto my new ipod and the ones i dont want off! Help Please!!!!

    See Here  >  http://support.apple.com/kb/HT1386
    From Here  >  http://www.apple.com/support/ipodtouch/syncing/

  • 1st Gen iPod Mini won't work with new version iTrip

    Hello all,
    I cannot get my new iTrip (which connects to the bottom of the iPod) to work with my girlfriends iPod mini 1st generation. The new iTrip works fine on my video iPod but not on her mini.
    We had the original iTrip and that worked fine but nothing is happening at all when the music is playing and the iTrip is connected. Anything i need to do or install to get this working? I have tried to search the discussions but failed to find a similar problem.
    Any help or info will be much appreciated.
    Many thanks.

    Ah, i seemed to have fixed it! Well i've been trying for a few weeks now to sort this out and as soon as i put up a post it works. Oh well at least its working now. It seems like that the iPod needs to be playing BEFORE the iTrip is plugged in the turn it on.
    I'll get me coat...

  • 3rg gen ipod dock connector not working with new imac on leopard 10.5.1

    Recently found that my 3rd gen ipod is not working properly when i connect it using its dock. itunes just freezes and comes out with some "disk insertion error". however, when i don't use the dock and connect the ipod to the imac directly using its own firewire cable, everything is ok and working properly.
    it seems to be the ipod dock that is the problem. but am wondering why wouldn't it work? any ideas? I'd still like to be able to use the ipod dock...
    thanks.

    ipodaid.page.tl go there, he got my iPod fixed.

  • New iPod Touch will not pair with New Resound Linx hearing aid

    Greetings
    Received a new pair of hearing aids aweek ago,  Resound Linx.  Very nice indeed.
    Days after I purchase a New iPod Touch, down loaded all updates and the Resound Smart app.
    Followed instructions to the letter but am unable to pair the hearing aids with the iPod.
    Hearing aids work fine and have fresh batteries.  Bluetooth turned on, iPod continues to search
    but can not find hearing aids.  Has anyone had this problem, can anyone offer any suggestions.
    Many Thanks
    David

    Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

  • 1st Gen iPod Nano won't work with new Nissan interface.

    I just bought an 09 Nissan Cube that has the factory ipod interface where you can control everything through the steering wheel and radio, well my ipod has been great, yes old, but works great and always has in other cars such as the Scion xB I just traded in on it, using the same type of system.
    Well, when I plug it into my new Cube, it charges fine, but just keeps saying "Ok to Disconnect" and goes back and forth to that and the 1st menu screen all the time.
    I did a reset where you hold the middle button and the menu button for 6 seconds, but that did not fix it. I'm at a loss.
    I know the interface works because we tried another newer ipod and my iphone works as well.
    Any ideas? I don't want to spend the cash to buy another ipod.

    Ah, i seemed to have fixed it! Well i've been trying for a few weeks now to sort this out and as soon as i put up a post it works. Oh well at least its working now. It seems like that the iPod needs to be playing BEFORE the iTrip is plugged in the turn it on.
    I'll get me coat...

  • TS1702 My ipod touch will not sync with my itunes because they can not be found! Help!

    Hi,
    I have just updated my itunes to iOS 5.1.1 - sync'd my ipod touch and now found that all my tracks on my ipod touch have been removed from it and am unable to sync / transfer my music from my itunes back onto it. Message boxes come up which states they can not be found. Please help!

    Does the music play in iTunes on the computer?
    Maybe
    iTunes: Finding lost media and downloads
    Maybe here is you updated iTunes on your computer
    No content shows up in iTunes after updating

  • Help please.... My 3rd gen Ipod Touch will not sync up to Itunes....

    It keeps bringing up a window that is recognizing the Ipod as a camera and starting Camera wizard.  I followed the troubleshooting steps - I have the updated ITunes version, I have restarted, I have switched USB ports.... The last step is to reinstall Itunes, but I am afraid I will lose all of my recent music that I have uploaded from CDs (& spent hours doing!)

    Reinstalling iTunes will not do anything to your music/iTunes library. However, you should always backup your important files.
    iTunes: Back up your iTunes library by copying to an external hard drive
    I would remove and reinstall all the Apple software using:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    or
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

  • 4th gen ipod touch will not come up on Itunes

    I have a 32gb 4th generation ipod touch and whenever i connect it to itunes it says this ipod cannot be used because the Apple Mobile Device service is not started. I don't know what this means and i cannot sync my ipod anymore.

    Type " Apple Mobile Device service" into the search bar at the top of this screen next to "Support" and see if the resulting articles help.

Maybe you are looking for