2.1 and IMAP - Still doesn't seem to work??

Anyone else having better luck with checking IMAP email accounts under 2.1?
I still have the same issues as before, it seems to randomly work, sometimes it gets the mail other times it says connecting for minutes on end and nver seems to pull the email.
I end up using gmail to check my other email accoutns since the built in email client seems to jsut not work properly.

same issue... huge pain. another thing i notice is that when i use my iphone to check email (and i get the usual hang at "connecting" or "checking"), entourage also has problems accessing the same email account for a while. its almost like when the iphone tries to check email via IMAP, it doesn't properly "hang up" the connection which causes any subsequent connect (that hasn't timed out i guess) to freak out.
has anyone else experienced this issue wich the email on their home machine (entourage or otherwise) - (which i never had before i got the iphone or 2.1)?

Similar Messages

I'm travelling and trying to back up my new iPhone to iCloud. I have sufficient storage, am connected to wifi and it's plugged into a power source and yet it doesn't seem to work. Can anyone suggest what I'm doing wrong?

I'm travelling and trying to back up my new iPhone to iCloud. I have sufficient storage, am connected to wifi and it's plugged into a power source and yet it doesn't seem to work at all. I'm currently in India. Could that be the cause or can anyone suggest any reason why this wouldn't work?

"gets stuck" - are there any error messages?
If you get the error "Backup not successful" and you've tried deleting the last backup and trying to back up manually without luck, try the following test: Go to...
Settings>iCloud>Storage & Backup>manage Storage, tap your device name in the Backups section, then look under Backup options. Turn off all apps from backup and then do a manual backup. If that doesn't work, then this post will not help. If the backup works, then go back to the app list and turn some on and try another backup. If successful, keep repeating these steps. If it fails at some point, then try to zero in on the one app that seems to make the backup fail. (I had this problem and found one app failing, probably due to a corrupt data file.)
This process will take time, but if a backup works with no app data being used but clearly fails with the original settings, then somewhere in the mix of apps is a "bad" one.

I can't access most internet pages because I don't have adobe flash player for my powerbook and the download doesn't seem to work?

I can't access most internet pages because I don't have adobe flash player for my powerbook and the download doesn't seem to work?

The message requesting that you download Adobe Flash Player takes you to FP requireing an Intel processor. Doesn't work on a PowerPC processor. I fould a hack, installed it & it works with Firefox, TenFourFox & Safari.
Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.
 Cheers, Tom

HT4356 So I'm trying to connect my iPad to my printer and it still doesn't want to work

So my im trying to print a picture from my iPad and I trie and tired to connect it with my printer and it doesn't work and my printer is an Hp printer

You are trying to print with AirPrint? For starters, I would review this.
http://support.apple.com/kb/ht4356

HT5868 I am not hooking up to a new computer - I just plugged into the same computer and it asked me this Trust My Computer question. I hit Trust - yet it still doesn't seem to find the device on my computer. It doesn't show up in my iTunes list of devi

I am not hooking up to a new computer - I just plugged into the same computer and it asked me this Trust My Computer question. I hit Trust - yet it still doesn't seem to find the device on my computer. It doesn't show up in my iTunes list of devices.

Hi Dalegu219,
Thanks for visiting Apple Support Communities.
If your iTunes library is on an external hard drive, but iTunes is not recognizing the library, first make sure the right library is selected.
You can use these steps to make sure iTunes is opening the library on your external drive:
If iTunes is running, quit iTunes.
If you're using Windows, hold down the Shift key and from the Start menu, choose All Programs > iTunes > iTunes.
If you're using a Mac, open iTunes and immediately hold down the Option key.
You should see one of these screens:
Pick Choose Library and locate the library on your external hard drive.
From:
iTunes: How to open an alternate iTunes Library file or create a new one - Apple Support
If the right library is selected, but you do not see your songs, try re-creating the library using the instructions found here:
iTunes: How to re-create your iTunes library and playlists - Apple Support
Best Regards,
Jeremy

On any page that I have to log in Firefox stops responding and has to shut down. I've tried resetting it and it still doesn't work.

I've been having this problem for a while now and I can't seem to fix it. Any time I log into any page, Firefox says not responding and I have to restart it. I have to run all of firefox in safe mode if I log out of my email or facebook. I've tried resetting FF and it still doesn't work.

''' "I have to run all of firefox in safe mode if I log out of my email or facebook. " '''
Please explain what you mean by '''all of firefox'''. You're either running in the Firefox SafeMode or you're not. There's no "all" or partial SafeMode.
Please see this: https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode

I used to be able to download files from the Harddrive of my Sony Handycam, but now it won't let me import them while going through "log and transfer." I have tried to update my settings, but this doesn't seem to work. Any help would be much appreciated

I used to be able to download files from the Harddrive of my Sony Handycam, but now it won't let me import them while going through "log and transfer." I have tried to update my settings, but this doesn't seem to work. Any help would be much appreciated

Hard Drive: The Hard Drive is on my camera (Sony Handycam)
Just needed some info on what is going on with your particular system.
Knowing the exact camera model will also assist us.
If this camera is standard AVCHD you should be able to connect with USB to Mac with FCE open and use Log and Transfer without all the fiddling around converting etc.
What FCE does during ingest is convert files to AIC. (Apple Intermediate Codec)
FCE cannot read the individual files in the BDMV folder, that's why all the converting is required when you use that method.
BTW: regards formatting drives/cards/memory on cameras; it is wise to use the actual device to format rather than a computer. This is a prime cause of read/write goof ups with solid state media. This applies to still or video cameras.
Keeping the COMPLETE card/memory structure in tact is vital for successful transfers.
Try here for some trouble shooting tips:
https://discussions.apple.com/message/12682263#12682263
Al

My iPhone 5 randomly shutdown and rebooting doesn't seem to work for me, what should I do?

It also happens when I'm charging my phone, and also the battery percentage doesn't show that correct battery level not unless I turn off and on.. I tried rebooting the phone but it doesn't seem to work for me, random shutdown still happens..

Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.

Email Security Plug-in - Doesn't seem to work with right click or save and send

I've searched the knowledge base but have not located the answer yet.
We have the Encrypt Message plug-in installed to flag the email [SEND SECURE]. This works very well when in Outlook. It does not seem to work when right clicking a file to send outside of Outlook or performing Save and Send from within Microsoft Office. The add-in still shows and users are clicking it and the Send button but the emails are not going securely. We are on Microsoft2010 on mostly XP machines.
How can I get Encrypt Message to work in all instances?
Thank you.
Starla

Andreas
I am getting an error. See below for what I'm choosing and the response. let me know if I'm supposed to be trying to download from another area.
Thanks
Starla
Email Security Plug-in - Doesn't seem to work with right click or save and send
Cisco IronPort Email Security Appliance C370
Release:IPAS
Filename: CiscoEmailSecurity_7-2-0-039.exe
Remove
Details
Release
IPAS
Filename
CiscoEmailSecurity_7-2-0-039.exe
Release Date
25/Oct/2011
Description
Cisco IronPort Email Security Plug-in (Outlook)
Size
32541.84375 KB (33322848 bytes)
Router Checksum
0x553f
MD5
f0c864697d9e1a3e8f5297062943ac50
Email Security Plug-in - Doesn't seem to work with right click or save and send
Save the device to 'My Added Devices' list
More Info
'My Added Devices' list could be found by: 1. Clicking on 'My Cisco' Tab and expanding
    the 'Added Devices' section. 2. Selecting any task specific product
   selector and clicking on 'My Added
    Devices' in left pane.
Email Security Plug-in - Doesn't seem to work with right click or save and send
Set Cisco Notification Alert
More Info
All 'Cisco Notification Alerts' list could be found
by: 1. Clicking on 'My Cisco' Tab and expanding
    the 'Support Notifications' section.
Cisco service contract information indicates you are not authorized to download software for the following product(s):
Cisco IronPort Email Security Appliance C170
Cisco IronPort Email Security Appliance C370
Cisco IronPort Email Security Appliance C650
To download software for other product(s), remove the software for the product(s) listed above.
Or, if you feel this message is in error, please:
1. Email technical support for 24x7 assistance. To expedite your request, please include the following information:
         User ID (Cisco.com ID used to download software)
         Contact Name
         Company Name
         Contract Number
         Product ID
         Desired Software Release or File Name
2. Contact your Cisco Representative, Partner or Reseller to ensure product(s) listed above are covered on a service contract. The Partner Locator link may assist in locating your nearest partner.
3. Associate contracts for those products to your Cisco.com profile using the Instructions found in Profile Manager. After you submit your additional contracts, verification and updates may take up to 6 hours to complete.

My ipod is dead. I have tried resetting but to no avail. I have attached to itunes and it sees that the ipod is bad, but it still can't seem to work. How do I get it fixed?

My ipod is dead. I have tried resetting but to no avail. I have attached it to itunes and it sees the ipod is bad, but it still can't seem to work. How do I get it fixed?

Its probably just as you said, it's dead. I mean the battery.
I have a second generation iPod and the battery doesn't hold a charge long. So yours must be really struggling with the battery.
You can send it off for a battery replacement, or as is expected due to the cost of doing that and with standard manipulative business thinking, you could just get a new iPod like a good little customer.

I just restored my ipod and the power button works, as well as the home button but when I slide the unlock button it doesn't respond. Basically it is not sensing that I am touching it. I've tried restoring it and restarting it but nothing seems to work.

I just restored my ipod and the power button works, as well as the home button but when I slide the unlock button it doesn't respond. Basically it is not sensing that I am touching it and I can not get out of the home screen. I've tried restoring it and restarting it but nothing seems to work. I've tried everything, is there anything I can do myself to fix it?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

HT5312 The option to reset security information tab isn't showing up for me, is there I way that I can make it show up. I have a rescue email address and it still doesn't show up. Please help!

The option to reset my security information tab is not available for me, I have a rescue email address in place and it still doesn't show up. Please help!

You need to ask Apple to reset your security questions; ways of doing so include clicking here and picking a method for your country, and filling out and submitting this form.
(96335)

Safari on my iPhone 6 running 8.02 doesn't seem to work right. Some Java scripts don't show correctly and they do on other browsers I have downloaded. I tried almost everything and nothing seems to work to fix it. Please help.

Some websites like the one of my college uses JavaScripts and they seem to load correctly to a certain point but then not really. For example in one it would say select an option from the left menu. And I do it hut nothing happens. But when I go to the same website in another browser on my phone. The JavaScript works completely and allows me to see whatever I was clickig on that menu. I have seen that there are other websites being affected too. I tried clearing my cookies and data. even restarted my phone. And doesn't seem to work. I don't know how change the configuration any more to make it work like normal. At first I thought it was my school's website but it never got fixed. And now I realized is my safari browser! I wanna keep using it since I am really familiar with It. If someone knows how to fix this please let me know!
Thanks

You can reset the SMC and see if that helps. If it's a unibody or Retina, follow the method for "a battery you should not remove yourself."
http://support.apple.com/kb/ht3964

Hi I'm running Addressbook and cannot clear previous entry easily when searching my data base of around 5,000 contacts. I prefer to view in All contacts on a double page spread with details on the right page. Searching doesn't seem to work correctly i

Hi I'm running Addressbook and cannot clear previous entry easily when searching my data base of around 5,000 contacts.
I prefer to view in All contacts on a double page spread with details on the right page. Searching doesn't seem to work correctly in this view.
It's always the second search that is problematic.
I've tried typing over and all it seems to do is confine the search to the the entries that have come up for the previous search.
I've tried to use the x to clear the previous entry and then type the next search, same problem. The only way seems to be to move from "All Contacts" to "Groups". Then the searched name appears and I can return to All Contacts to see full details.
Surely three key press' are not the way it's supposed to work?
FYI
Processor 2.7 GHz Intel Core i7
Memory 8 GB 1333 MHz DDR3
Graphics Intel HD Graphics 3000 512 MB
Software Mac OS X Lion 10.7.3 (11D50d)
Address book Version 6.1 (1083)
MacBook Pro, Mac OS X (10.7.1), 8Mb RAM 2.7Ghz i7

AddressBook experts are here:
https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion#/?tagSet=1386

I have Adobe Design Standard CS6 purchased 2013 with serial number but cannot find to download it onto a new mac laptop. When I try and add the 24-digit serial number to my account it doesn't seem to work?

I have Adobe Design Standard CS6 purchased 2013 with serial number but cannot find to download it onto a new mac laptop. When I try and add the 24-digit serial number to my account it doesn't seem to work?

CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
You can also download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

2.1 and IMAP - Still doesn't seem to work??

Similar Messages

Maybe you are looking for